Used Brade Machines for sale (65,506)

Condition: used, Year of construction: 2023, operating hours: 4,058 h, functionality: unexamined, machine/vehicle number: 6000027, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 4,058 h KNOLL aerosol extraction system AerosolMaster 4000 ATS Serial No.: 1580193 Year of manufacture: 2022 Chip conveyor KNOLL 750 K-1 Serial No.: 1579461 Hsdpfoy Spunjx Ag Ijfg Year of manufacture: 2022

Condition: used, Year of construction: 2023, operating hours: 3,312 h, functionality: unexamined, machine/vehicle number: 6000028, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 3,312 h Hodpey Spuhjfx Ag Isfg KNOLL aerosol extraction unit AerosolMaster 4000 ATS S/N 1577134 Year of manufacture: 2022 Chip conveyor KNOLL 750 K-1 S/N 1585685 Year of manufacture: 2022

Condition: used, Year of construction: 1992, SCHÜTTE SF 26 DNT Max. bar diameter round / square: 26 / 19 mm Spindle pitch circle diameter: 270 mm Bar feed: 125 mm Longitudinal slide travel (total / work): 80 / 63 mm Cross slide travel (total / work): Upper: 40 / 25 mm Middle: 40 / 25 mm Lower: 50 / 31 mm Spindle speeds (stepless): 530 – 3,750 rpm Main times (stepless): min. / max. 0.72 – 100 s Secondary times: 0.90 – 1.1 s Creep speed: 3 rpm Main drive: 22 kW Dimensions (incl. bar guidance): approx. L x W approx. 7.2 x 1.6 m Weight: approx. 6.8 t Voltage: 400 V / 50 Hz Scope of delivery: Machine SCHÜTTE SF 26 DNT Hodpoyxcvxjfx Ag Isfg bar feeder

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle pitch circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross-slide travel (total / working): Upper: 50 / 33 mm Center: 50 / 30 mm Lower: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Workpiece speeds per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 seconds Long: 1.8 – 200 seconds Secondary times: 0.7 – 1.25 seconds Main drive: 18.5 kW Dimensions (incl. bar feeder): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Hfjdpfx Ageyxcr Hj Isg Voltage: 400 V / 50 Hz Scope of supply: SCHÜTTE SF 32 machine Bar loader

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross slide travel (total / working): Hfjdpfx Aeyxcuusg Iog Top: 50 / 33 mm Middle: 50 / 30 mm Bottom: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Workpiece feed per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 s Long: 1.8 – 200 s Secondary times: 0.7 – 1.25 s Main drive: 18.5 kW Dimensions (incl. bar guide): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz

Condition: used, Year of construction: 2002, Technical Details: SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Longitudinal slide travel (total / working): 63 / 50 mm Cross slide travel (total / working): 32 / 20 mm Spindle speeds (infinitely variable): 800 – 10,000 rpm Main cycle times (infinitely variable): min./max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Feed motor torque: 18 Nm Dimensions (including bar guide): approx. L x W approx. 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: - Bar feeder Pra 52 P IEMCA Hodpfoymdd Sex Ag Ijfg - RUEZ KF0WW2/312 DAS, year 2002

Condition: used, Year of construction: 2023, operating hours: 1,621 h, functionality: unexamined, machine/vehicle number: 6000047, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 1,621 h KNOLL aerosol extraction system AerosolMaster 4000 ATS S/N 1623285 Year of manufacture: 2023 Chip conveyor KNOLL 750 K-1 S/N 1627884 Year of manufacture: 2023 Hfjdpfx Agjy Spt Re Iog

Condition: used, Year of construction: 2023, operating hours: 2,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system AerosolMaster 4000 ATS S/N 1580192 Year of manufacture: 2022 KNOLL chip conveyor 750 K-1 Hfsdpfxjy Sptwj Ag Iog S/N 1591356 Year of manufacture: 2023

Condition: good (used), Year of construction: 2010, Straight conveyor belt for automation (for example, 'ghost shift' intermediate buffer) Consists of two belts: one belt holds empty cartons, and the second belt holds filled cartons. Both conveyors are equipped with EUROMAP67. With this, the conveyors can be programmed together with the machine and the removal robot. Manufacturer: KRAUSS MAFFEI Year of manufacture: 2010 Hsdey Spixjpfx Ag Ijfg Length of conveyors: 6.00 m each Total width of conveyors: 1.75 m

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA Hfodpfxsy Sn N Ds Ag Ieg - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7689 TECHNICAL SPECIFICATIONS - Tool diameter: 16mm - Maximum drilling depth: 160mm - Maximum milling length: 160mm - Adjustment of drilling unit: forward/backward, up/down and sideways - Working table dimensions: 600x320mm Hodpfsy Sn Awex Ag Iofg - Material clamping system - Motor power: 2.2kW - Dimensions (L/W/H): 950x740x1330mm - Weight: 283kg ADVANTAGES – Made in Poland – Very good condition – Used drilling machine Net price: 6300 PLN Net price: 1500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm Hfodpfx Aey Snyieg Ijg dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control system: Heidenhain TNC430 PA Working areas Hfedpfx Aex Ifdkjg Ieg X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates depicted as well as other clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Drives - Linear axes Feed rate X, Y, Z axis: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions and weights Space required (machine without control cabinet): approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - Tool changer - TT140 touch probe Condition of the machine Fully functional, machine without enclosure! The zero-point clamping plates and other accessories shown are not included in the scope of delivery!

Condition: used, Year of construction: 2005, functionality: fully functional, Control HEIDENHAIN iTNC530 Table dimensions 1250 x 1600 mm Max. table load 15 tons X-axis travel 2500 mm Y-axis travel 2000 mm Z-axis travel 1500 mm Spindle speed range 4 - 3500 rpm Spindle taper SK50 Drive power 45 kW Tool magazine 90 stations Machine weight 35000 kgs Floor space required 7000 x 14000 mm Hfedpjy Snwuefx Ag Iog Accessories, features - Table rotaion 0-360 degree - W axis - Coolant unit with papirfilter - Chip conveyor - Fully covered working area - Portable MPG The machine is still under power in Hungary.

Condition: excellent (used), Year of construction: 2014, operating hours: 4,300 h, functionality: fully functional, Control: MAZATROL SMART Table dimensions: 900 x 430 mm T-slots in the table 3x18x125 mm Max. table load: 500 kg X-travel: 560 mm Y-travel: 430 mm Z-travel: 510 mm Max. spindle speed: 12000 rpm (Direct drive) Taper: SK40 Rapid traverses X/Y/Z: 42 / 42 / 42 m/min Feed rates: 1 - 8000 mm/min Drive power: 18.5 / 11 kW Hedpfoy Snnmsx Ag Isfg Power requirement: 400V / 50-60 Hz / 32A Weight: 4600 kg Dimensions LxWxH: 2080 x 2616 x 2780 mm Accessories, Equipments - MAYFRAN chip conveyor - Coolant system - Spindle through air - ITS (Intelligent thermal shield) heat compensation system - Tool presetter - Workpiece probe without touch probe - Signal tower - Transformer The machine can be found in almost new condition. Unter power in Hungary.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, table diameter: 4.000 mm Hfjdpfx Agjy Snidj Ijg swing diameter: 4.500 mm turning height: 1.600 mm Cross-section of tool slide: 250 x 250 mm power capacity: 1 x 100 kW max. rotational speed: 140 min/1 max. table load: 50 t 2 pieces of tool changers 40 slots per tool changer

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Hfedpfx Aey Snhgjg Ijg Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Hsdpfx Agjy Snbmj Iofg Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Ausstattung: .Kernzug Hfjdey Snapjpfx Ag Iog -Roboter

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Hfsdpfxjy Smu Es Ag Ieg Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 420S 800-350 Year of manufacture: 2003 Injection unit: Screw diameter: 50 mm Shot weight: 250 g Hedpfoy Smursx Ag Iofg Injection pressure: approx. 1300 bar Dosage volume: 288 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 interface Robot interface Air valve x 1 Core pull control Injection unit hardened - bimetallic Proportional valve on the injection unit – for precise injection Integrated original Arburg side sprue picker Dimensions: Weight: 3,800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pump/Motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 with the sprue picker anvil+long leg Year of construction: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Hsdpfxey Smulj Ag Iofg Additional equipment: Euromap 12 Robot interface Control system with air valve Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Hfedey Smufepfx Ag Iog Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of construction: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Injection pressure: 1820 bar Hjdpfxey Smt Io Ag Iofg Metering volume: 144 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - clean production conditions Euromap 12 Robot interface Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 with the Wittmann W721 robot Year of construction: 2004 Injection unit: Hjdpfx Agsy Smtzo Iefg Screw diameter: 30 mm Injection weight: 89 g Injection pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Robot Wittmann W721 Year of manufacture: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request