Used Bottom Plate for sale (14,879)

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Hedpfx Asz R D Hfjb Usfn

Condition: used, Year of construction: 2014, Prints and applies labels to the underside of packs The VWS LPX Blow 4/300R prints a label and blows it onto the pack from below as it runs across the belt. Useful for trays and tubs whose top has to stay clear, or when you want information on the bottom as well as a top label. The machine was built in 2014 and sits on a stand with an 800 mm belt. It runs on 230 V. Located in Emmeloord, the Netherlands. Immediately available, price on request. Hodoz Ndaujpfx Ab Uefn More photos and full specifications: / Type: Bottom labeller (print & apply) Application: Blow applicator from below Belt: 800 mm, on stand Electrical: 230 V, 50–60 Hz

Year of construction: 2016, condition: good (used), Approx. 4 – 5 used plate heat exchangers, Funke, FP. 16-75-1-NH-0: Hjdpfsz Sdypsx Ab Usfn Price per unit, ex works: €550.00 (net)! Manufacturer: Funke Type: FP. 16-75-1-NH-0 Serial number: 0823902 Year of manufacture: 2016 Condition: good Availability: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter Hfjdsz N Hxhopfx Ab Uen voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: excellent (used), Professional granite measuring plate by VOGEL Germany, designed for precise measuring, inspection, and workshop applications. Technical data: Hfjdpfsz Spcmjx Ab Uen Manufacturer: VOGEL Germany Article number: 260266 Plate dimensions: 800 × 500 × 100 mm Accuracy class: 1 Identification number: 2014081163 Material: granite Marking: “nicht kalibrierpflichtig” (not subject to calibration) Includes a sturdy metal stand/base The plate is used. Normal signs of wear, soiling, and minor surface scratches are visible. The visual condition is accurately depicted in the photos. The robust, heavy-duty construction ensures a stable reference surface during the inspection and measurement of components. The sale includes the VOGEL granite plate and the stand shown in the photos.

Condition: good (used), Used horizontal boring mill/drilling machine by Cornac Type BS 65 Hedpfxsz Iarqe Ab Uefn Spindle diameter 65 mm Table dimensions approx. 600 x 1000 mm X / Y / Z = 1000 / 800 / 650 mm

Condition: reconditioned (used), functionality: fully functional, total width: 800 mm, total length: 1,200 mm, plate height: 950 mm, Granite Plate (CEJ) Hfodpfx Abexluf No Usn - Dimensions 1200x800x180mm - Quality Class 00 (incl certificate) - with steel cabinet - surface refurbished

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine Hfjdez N Hwqjpfx Ab Ujn In excellent condition. The machine was completely overhauled in 2016.

Condition: used, Year of construction: 1993, offered without plates. Plates maximum: 100 Plate formats: 600x600 Platefilter features: Electric-Hydraulic press Hedpfx Aboz R Dimj Usfn dimension ca. 380x80x120 cm Distance between first plate and spindle approx ca. 180cm

Condition: excellent (used), Year of construction: 1990, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control ELGO TYP 85 oil volume 120 ltr. engine output 13.0 kW weight 6300 kg. range L-W-H 3950 x 1950 x 1680 mm very well-maintained condition (!!) Equipment: - Electro-hydraulic guillotine shear with guided blade movement - ELGO NC "Type 85" control unit * Front control panel, swiveling (front left) - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - NC motorized backgauge * With recirculating ball screws - 1x side gauge 2,000 mm ... with T-slot + mm scale - 2x front support arms 1,000 mm ... with mm scale - Recessed grips in the support table - Front finger guard - 1x movable foot pedal - Operating manual Hfodpfx Abjz N Hxne Ujn

Condition: used, New: Yes Hodsz S Hd Nopfx Ab Uofn Year of construction: 2023 Dimensions (LxBxH): 90 x 90 x 110 cm Attachment suited for: Lifting equipment

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Hodpfx Abjibq Itj Ujfn Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Hfedpfxoxn Rhrj Ab Uen Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Width: 3850 mm Height: 2450 mm Weight: 20,000 kg

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Hjdpfx Absz H Iyye Usfn Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: good (used), Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. Hodpez H Izdefx Ab Usfn 2 same marble plates available.

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Hfjdpfxez H Iyme Ab Uen Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine MODEL M3035 , year 2024 machine as new with warranty included Planetary dual pre-pinch plate prebend SPECIAL FRAME WITH TOP ROLL REDUCED SIZE 300 MM TO ACHIEVE SMALLER BENDING DIA 330 MM Performance Capacity: Plate width 3000 mm plate thickness rolling 22mm pre-bend 20 mm minimum rolling diameter ID 330 mm usefull surface width on the rollers 3100 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine to agree on request nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm Hfodpfx Absy Tbf Ie Usn nr. 1 side support hydraulic right side 2.2ton double arm

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek work height max. 840 mm Hfjdpfjxab Rusx Ab Usn down holder 14 Stück Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Please feel free to contact us for a quote. Hedoxvinmepfx Ab Uefn

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm Hedpfez N Tbpox Ab Uefn

Condition: good (used), Year of construction: 2016, Plate heat exchanger, ALFA LAVAL, M6-MFM – used: Price ex works: €950 (net) plus dismantling, etc. Manufacturer: ALFA LAVAL Type: M6-MFM Hfodjz Sdzgepfx Ab Usn Serial number: 30109-39231 Year of manufacture: 2016 Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), Year of construction: 2015, Approx. 4–5 units of plate heat exchangers, Hydac, H28A-ST16 – used: Price per unit, ex works: €350.00 (net)! Manufacturer: HYDAC Heat exchanger type: H28A-ST16 Year of manufacture: 2015 Material number: 4082764 Production number: SD 23701 Rated output: 231 kW Heat transfer area: 4.65 m2 Minimum length: 96 mm Max. operating pressure: 10.0 bar Max. test pressure: 13 bar Volume, primary side: 6 liters Volume, secondary side: 6 liters Hfsdpfez Sdzyox Ab Uon Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Year of construction: 2024, condition: used, Manufacturer: Ziemex Processing Equipment Year: 2024 Model: Z-compact Serial number: 1403204 Type: Welded plate heat exchanger Material: 1.4404 stainless steel (316L) Hedpfxsz Iubms Ab Ujfn Fluid: Oil (circuit B) / Water (circuit A) Circuit B volume: 59 L Circuit A volume: 6 L Permissible pressure: 0 to 6 bar Permissible temperature: 0 to +200 °C (circuit B) / 0 to +110 °C (circuit A) Test pressure: 9.5 bar (circuit B) / 8.7 bar (circuit A) Fluid group L1G GR2 Heat exchange surface area: 4.2 m² Unladen weight: 142 kg The Z-compact® welded plate heat exchanger combines the thermal efficiency of a plate heat exchanger with the mechanical robustness of a shell-and-tube heat exchanger. L'échangeur de chaleur à plaques soudées Z-compact® allie le rendement thermique d'un échangeur de chaleur à plaques à la robustesse mécanique d'un échangeur de chaleur à calandre et tubes. Under equivalent operating conditions, the Z-compact® offers better heat transfer than a conventional tube-and-shell heat exchanger. Its heat transfer surface is more efficient and its pressure drops are lower.

Condition: used, Year of construction: 1991, Used Machine Year of Manufacture: 1991 Features and Technical Specifications: - Fully automatic, floor-standing - Cutting area: 5,300 x 2,200 mm - Saw blade diameter: 300 mm - Control system for vertical and horizontal cuts - With aluminum folding stops and aluminum center support - With SUPER-CUT scoring device Hodpfx Abszk Nx Ij Ujfn - Motor: 3 kW - 400 V Availability: available shortly Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2615 laser hours Hjdpeytawnjfx Ab Uofn 2400 dpi Z-speed Total number of exposed printing plates: 395,443 pieces Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Material flow from left to right, Print Console enabled for all RIP software, Dell PowerEdge T330 server.