Used Bored for sale (5,091)

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Ledpfx Aexzq I Ssbzehl Water treatment system available at additional cost

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Lodpsy H Eckofx Abzehl Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Follower center

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, machine/vehicle number: 216615, turning length: 995 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, milling spindle length: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 35 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 1,045 mm, torque: 468 Nm, bar passage: 76 mm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, distance table center to spindle nose: 1,234 mm, overall weight: 9,760 kg, spindle diameter: 76 mm, feed force X-axis: 38 N, feed force Y-axis: 26 N, feed force Z-axis: 38 N, Equipment: documentation/manual, rotational speed infinitely variable, MAZAK INTEGREX 200-IV / 200-IVS Chuck size: 8 inches Max. swing diameter: Ø 660 mm Max. machining diameter: Ø 660 mm Max. machining length: 995 mm Ledpez A Huhjfx Abzehl Max. bar capacity: up to Ø 65 mm Main spindle: Spindle speed: 35–5,000 rpm Main spindle motor power: 22 kW Spindle bore diameter: Ø 76 mm Milling spindle: Spindle speed: 15–12,000 rpm Milling spindle motor power: 18.5 kW Max. torque of the milling spindle: 119 Nm Max. milling tool size: Ø 125 × 300 mm Travel ranges: X-axis: 580 mm Z-axis: 1,045 mm Y-axis: 160 mm

Condition: used, Year of construction: 1987, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Colour: Green Empty weight: 700 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 2.2 - Table length [mm]: 500 - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 - Max. spindle speed [rpm]: 1500 - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Lsdpfx Abjzkq Auszehl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), bore capacity in steel (diameter) 28 mm arm length 700 mm workpiece height max. 1300 mm tool taper MK3 Ledezfqmcepfx Abzjhl feeds 0,1-0,3 mm/U spindle turning speed range 100-1.220 U/min total power requirement 1,4 kW weight of the machine ca. 1,3 t dimensions of the machine ca. LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping

Condition: used, Colour: Green Empty weight: 6.000 kg Lodpfx Ajwfpbbjbzshl - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Paulimot PM4000 lathe with measuring system and base cabinet For sale is a Paulimot PM4000 precision lathe, including a digital measuring system (3-axis digital display) and a matching base cabinet. The machine is ideally suited for use in workshops, model making, prototype manufacturing, training, or for demanding hobby users. The integrated measuring system allows for precise and convenient execution of work. Equipment: Paulimot PM4000 lathe Digital measuring system / digital display Sturdy base cabinet Lead and feed screw Forward and reverse operation Various feed and thread settings Ready for immediate use Technical data: Distance between centers: 900 mm Swing over bed: 310 mm Spindle bore: 38 mm Internal chuck clamping range: 4-200 mm External chuck clamping range: 65-200 mm Motor power: 1.5 kW Ledpfx Aez A Uqksbzjhl Power connection: 400 V Condition: The machine is in used and functional condition, with the usual signs of wear and tear due to age and use. An inspection and functional test on site is possible by arrangement. Scope of delivery: Paulimot PM4000 lathe Digital measuring system Base cabinet Various accessories and tools can be purchased separately. Weight: 542 kg More information on the manufacturer's website. Shipping costs are borne by the buyer; assistance with loading using a forklift can be provided. Sold from a private individual.

Condition: used, Year of construction: 1975, machine/vehicle number: 2622, functionality: unexamined, throat depth: 300 mm, Column drilling machine Alzmetall AB 35 S, serial no. 2622, year of manufacture 1975. Drilling capacity: Ø 35 mm, overhang: 300 mm. Round drilling table with T-slots, height-adjustable, mounted on a round column with a base plate. Control panel with main switch and cutting speed chart on the drilling head. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading upon agreement. All information without guarantee. Lodpfx Aoz A Uqwebzehl

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Manufacturer: Perske, multi-spindle drill head with drive -Drill head: 18 spindles Lodpovmw H Aefx Abzohl -Drill bit spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Quantity: 2 pieces available Price: per piece -Overall dimensions: 800/200/H575 mm -Weight: 67 kg/unit

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Plank SRB 35 High-Speed Radial Drilling Machine MK 4 Ljdpfx Asz A Ud Dobzjhl German manufacturer In original, almost new condition, not repainted. I have owned several high-speed radial drilling machines, but I was very surprised by this one. Stepless speed adjustment with 2 gear stages, stepless feed, threading device, Coolant system, excellent clamping, complete documentation, Runs as smoothly as a new machine. Speeds: 0 - 2880 Table: 1050 x 400 Overhang max. 1040 min. 370 Distance table to spindle max. 650 min. 280 Drilling stroke 140 Weight: 1900 kg Can, of course, be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment Lhodpfxoz Digpj Abzjl SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,750 mm, turning diameter over bed slide: 1,750 mm, turning diameter over top slide: 1,420 mm, turning length: 8,000 mm, total length: 12,500 mm, total width: 2,200 mm, total height: 2,300 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-175B2/8M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 8000 mm - turning diameter over bed: 1750 mm - turning diameter over support: 1420 mm - turning diameter in bridge recess: 2080 mm Ljdey N Sanjpfx Abzjhl - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 10500 mm width: 2130 mm height: 2300 mm total weight: 19700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Brand : CMZ Model : TBI 520 MC Cnc : FANUC 18i-TB with Manual guide Yom : 2005 Distance between centres: 1.100 mm Swing over bed: 520 mm Ø Max. Turning: 420 mm X Travel X : 296 mm Z Travel : 1090 mm Rapid Feeds (X, Z Axis): 18 m/min Rapid Feeds (Z Axis): 24 m/min Max Speed of the Head: 3000 rpm Spindle Bar Diameter: 82 mm Chuck Bore Ø: 95 mm Spindle Max. Power : 22 kw Number turret positions; 12 (VDI-50) Number positions of Driven tools 12 Driven Tools Speed 4000 rpm Max Power Driven Tools 8,5 kw Ljdozczacjpfx Abzshl C Axis and Driven Tools INCLUDED Hydraulic Steady Rest installation: INCLUDED Tool Presetter INCLUDED 2 Axial Driven Tool Holders INCLUDED 2 Radial Driven Tool Holders INCLUDED Installed Power 50 KVA Equipped with chip conveyor

Condition: good (used), functionality: fully functional, Characteristics: Lodpfjvy Adgex Abzehl Distance between centers: 4500 mm Turning diameter: max. 750 mm Spindl bore diameter: 105 mm Control: Heidenhain Including 2 x chuck diameter 500 mm and 315 mm Including 2 x steady rest

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Lhedpjy Hfm Njfx Abzol Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • 2 units available, identical machine • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm Lhodpfx Aoyvz Ibjbzjl • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm Lhsdpey E I Hisfx Abzsl • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 1985, chucking diameter 315 mm table load 300 Kg turning speeds 0,1 - 4,0 U/min connected load frequency 220 V bore diameter 63 mm weight 0,09 t Dimensions (LxWxH) 0,8 x 0,6 x 1,2 m Welding turntable incl. - 315 mm chuck - 3-axis torch holder - Cutting torch Lhjdpfx Ajz Dky Debzsl - Machine base frame

Condition: ready for operation (used), High-speed radial drilling machine, MK 2 Lodpfsz D D I Iox Abzehl Speed infinitely adjustable Drilling head electrically adjustable

Condition: new, Year of construction: 2026, Brand new, high-precision vertical broaching machine – a machine of exceptionally high quality. CNC-controlled vertical broaching machine with two, three (or four) CNC axes and electronic control of the rotary table with a positioning accuracy of 0.001°. For the efficient production of spline grooves (including tapered and tangential grooves) – keyways, internal and external gears, racks, etc. CNC control with a 10” color display and touch screen – software for roughing, finishing, and fine finishing (to achieve surfaces with the highest possible quality). Stroke range of the broaching tool holder: 10 to 250. Broaching tool holder speeds: 22 to 90 strokes/min, infinitely adjustable. Broaching tool holder swivel range: +/- 20°. Rotary table size: 450 mm. Bore in the rotary table: Ø 135 mm. Maximum table load: 1,250 kg. Table travel distances, longitudinal and transverse: 250 x 225 mm. Drive power, servomotor for the broaching tool holder: 3 kW. Ledpfx Aez Dpcqjbzehl Machine dimensions without control console: 1.3 x 1.45 m x approx. H 2.6 m. Machine weight: approx. 1,700 kg. - Automatic, electronically monitored central lubrication system for the guide rails. - Cutting fluid system for cooling and lubricating the broaching tools. Other models available.

Condition: reconditioned (used), functionality: fully functional, Drill press. Lhsdpfx Absz Dp Akjzel

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (software IMAWOP) Max useful working area (without edge banding process) mm 6100 x 2000 x 125 Max useful working area (edge banding process) mm 3100 x 1925 x 100 (panel thickness) No. 10 movable rails (supports) 6 x length mm 1400, + 4 x length mm 1450 LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pump, capacity 140 m3/h) Clamps for workpieces fixing Safety side metal grids and front emergency carpets Motorized carpet to evacuate chips and wastes Separate electric and command cabinet No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) Lhodpjz Dtudjfx Abzel Banding group on board - (Y AXIS) Glueing Unit (P.U.R. Glue + Quick Melt unit) VT 100/100 with NORDSON premelter Edge coils supporting unit (No. 2 reels) OPTIONALS: N° 1 Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles N° 1 Circular saw (diam. mm 200) N° 1 Combined unit: Corner rounding / Edge scraping (with glue scraping extension)

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg Lodpfsz Dtxcjx Abzohl

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Lsdpezdf Utofx Abzshl Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, KELLENBERGER KEL‑VISTA UR 175/1000 is a CNC cylindrical grinder, engineered for precision, high accuracy and reliability. Capacities: centre height 175 mm, distance between centres 1000 mm, max workpiece 100 kg; grinding wheel Ø400×63 mm, bore 127 mm; tailstock travel 50 mm, max table tilt 9°. Specs: wheel peripheral speed 35 m/s, spindle speeds 8–800 t/min (stepless), grinding spindle motor 5 kW, rapid feed 12 m/min, spindle taper ASA5/MK5, overall L3200×W1700×H2000 mm. Accessories: coolant system, paper filtration, set of grinding wheels. Delivers tight tolerances; ideal for automotive, aerospace, machine tools and medical sectors. Ledpsz Dvzasfx Abzohl