Used Book Press Machine for sale (100,559)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Fgedpfx Afjmck Ryjish Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: ready for operation (used), With documentation. Fgodpfx Asip Ul Esfieh

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: div., 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Fsdewpi Rkepfx Afiegh Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 130 t, ram bore: 55 mm, punching force: 130 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD EQUIPMENT • Steel Construction Frame • Gear Unit Operating in Sealed Oil Bath • Four-Sided Bearing Alignment • Nodular Cast Iron Connecting Rod and Crank Bearings • Crankshaft and Drive Shafts Manufactured from 4140 Tempered Steel • Centralized Fully Automatic Grease Lubrication System • Pneumatic Clutch and Brake System • CE-Conformant Safety Standards • Dual-Base Safety Valve • Manually Adjustable Stroke • Photocell Safety Light Curtain • PLC Control System • Touchscreen LCD Panel (for 150-300 ton models) • Dual-Hand Safety Pedal Control System • Mechanical Safety Fuse System • Hydraulic Safety Fuse System (for 200-300 ton models) • Emergency Reverse Motor Motion • Complies with Occupational Health and Safety Regulations • Anti-Vibration Mounts • CE Certified • Models Available from 20 Tons to 300 Tons Fgjdpfevtyvgox Afijh • 24-Month Warranty • Country of Origin: Turkey TECHNICAL SPECIFICATIONS CECP 130 C-TYPE MONOBLOCK FRAME Capacity: 130 Ton Throat Depth: mm Table-to-Ram Distance: 475 mm Ram Adjustment: 80 mm Press Width: 1600 mm Press Depth: 2000 mm Press Height: 3000 mm Table Hole Diameter: 220 mm Table Dimensions: 750 x 1000 mm Die Tie Rod Hole Diameter: 55 mm Ram Face Dimensions: 350 x 550 mm Table Height from Floor: mm Stroke: 20 – 140 mm Strokes per Minute: 45 spm Motor Power: 7.5 kW Motor Speed: 1400 RPM Weight: 6,000 kg • As a manufacturer, technical specifications may be modified upon request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Hot Press Machine • Using Purpose: Pressing Double Glass • Usable Glass Measures (max.) : a. Length : 2.000 mm., b. Width : 1.800 mm., • Voltage : 380 V., • Power : 31 (Kw), • Weight : 1360 kg (netto), • Dimensions(WxLxH): 2.080 mm. x 2.150 mm. x 1.600 mm., Fedpfxswdn S As Afiogh

Condition: good (used), Schuler PE4s 50/800 high-speed press  Manufacturer: Schuler   Type: PE4s 50/800 High speed press Fgsdpfsgryc Nex Afijh 61/21 600/3 pressing force: 50 t throat depth: 800 mm Stroke rate /min: 125-300 slide stroke: 40 mm Kohler decoiler 500.1 M After the purchase you will also get the documentation We sell a large number of paternosters. In addition to approx. 50 paternosters, there are countless other machines available. After purchase the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar Fgedsh U Dtuopfx Afioh 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Fjdpstia Hhjfx Afiegh

Condition: good (used), Tools: 3:1 SQ & 3:1 Calendar SQ Fsdpfsw E D Upex Afisgh All spefications in the PDF

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, pressing force: 300 t, power: 30 kW (40.79 HP), punching force: 300 t, warranty duration: 24 months, Equipment: safety light barrier, C TYPE ECCENTRIC PRESSES GENERAL FEATURES - Steel construction frame - Stress relief on the frame and welded parts by vibration - Table-to-table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 4 guides - Parts such as ram, connecting rod, and slide block are made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushings in the connecting rod (Zr14) - Equipped with spare bolster table - Table-to-ram adjustment by ratchet gear (motorized for 150 tons and above) - Manual central lubrication Fgsdpfx Afsw E Rkqsioh - Pneumatic foot pedal with locking and time-controlled dual hand control - Electric counter - PLC application and touchscreen – DELTA - Electric switching components from SIEMENS-SCHNEIDER - CE application OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electric system, valves, dual control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Lockable limit switch and control panel - Safety block - Protective guards in accordance with CE regulations TYPE C TYPE MONOBLOC FRAME Capacity 300 Ton Throat Depth 370 mm Table-to-Ram Distance 530 mm Slide-to-Table Distance 650 mm Distance Between Walls 470 mm Ram Adjustment 150 mm Approx. Press Width 2000 mm Approx. Press Depth 2700 mm Approx. Press Height 3200 mm Front Anchor Size 940 mm Side Anchor Size 1440 mm Table Hole Diameter 260 mm Table Size 700 / 1200 mm Die Mounting Hole Diameter 60 mm Ram Size 780 / 400 mm Table Height from Ground 810 mm Stroke Adjustment 20 / 200 mm Strokes per Minute 38 spm Motor Power 30 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 13,200 kg

Condition: good (used), Letterpress machine Bautzner Industriewerk, machine number 4868. Rollers rods with it but the rollers must be re-covered. Can be done by us for an extra charge. In a good condition, immediately available. Fjdpsgin T Tsfx Afisgh With interest we inform you also gladly about further machines in our house. You are welcome to visit the machine in our house after prior appointment.

Condition: as good as new (ex-display), Year of construction: 2023, Press-in machine with automatic feed via conveyor bowl Automatic feeds from above and below available. Touchscreen control with database for press-in pressure/fastener-dependent Fgedsld Threpfx Afioh Thrust 450 mm Press-in force 56 kN Suitable for self-clinching fasteners up to M8/M10

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable Fgsdpshmmfksfx Afijh - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Fedohhil Tspfx Afiegh Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 320 kg, CMC ITALIA COVERMAKER Model: LPS (50 x 70) Semi-automatic case maker for the production of book covers. Hot glue mounting for board and packaging It will also work with cold adhesive. Fgedpfou Ivx Djx Afioh Cover papers: 100 - 170 gsm Cover boards: 1.5mm - 3.0mm Power requirements: 400 volt - 1.39kw - 50Hz Weight: 320 kgs Year of construction: 2005 Fully working order.

Condition: new, Year of construction: 2025, throat depth: 350 mm, drop-through hole in table: 250 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 22 kW (29.91 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD HARDWARE Below are the technical specifications and general features for the 250-300 ton C-type eccentric press you inquired about. - Welded steel construction frame - Stress-relieved and welded components by means of vibration - Parallelism and rigidity tolerance between tables in compliance with ISO and DIN standards - Pneumatic clutch and brake combination - OMPI (Italy) - Components such as ram, connecting rod, worm gear, in steel casting GS52 - High-strength solid crankshaft – 4140 grade - Connecting rod lined with bronze (Zr14) - Spare bolster plate - Mechanical interlock safety device - Ratchet mechanism for bolster/table adjustment - Manual central lubrication system - Pneumatic pedal with lock and dual control, adjustable timing - Electric stroke counter - PLC integration and production line display – DELTA - Electrical switchgear components by SIEMENS and SCHNEIDER - CE conformity - Finger protection light curtains – SICK, LEUZE, KEYENCE - Safety PLC (oversees all electrical systems, valves, dual and pedal systems) – PILZ - Dual solenoid safety valve – GPA - Locked position switch and control panel - Mechanical safety wedge - CE-compliant protective enclosures TECHNICAL SPECIFICATIONS Type: C-TYPE MONOBLOCK FRAME Capacity: 250 Tons Throat Depth: 350 mm Table-to-Ram Distance: 520 mm Table-to-Guide Distance: 630 mm Frame Width: 520 mm Ram Adjustment: 150 mm Press Width: 2000 mm Press Depth: 2500 mm Press Height: 3100 mm Front Mounting Holes: 930 mm Side Mounting Holes: 1430 mm Table Bore Diameter: 250 mm Table Dimensions (W x L): 700 x 1100 mm Die Tie Rod Hole Diameter: 60 mm Ram Face (W x L): 670 x 380 mm Table Height from Floor: 810 mm Stroke: 20 - 160 mm Strokes per Minute: 40 spm Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Weight: 12,000 kg *As a manufacturer, technical specifications are subject to change upon request. OPTIONAL EQUIPMENT (NOT INCLUDED IN PRICE) - 8-point slide adjustment & hydraulic safety system - Speed control Fodpfjvtyy Sjx Afiogh - Automatic lubrication system

Condition: good (used), Year of construction: 1969, Book press Splek SL II B100, working size 28cm x 44cm, built in 1969, machine number 128, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment. Fedpfx Aovrdy Hofijgh

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max Fgjdpfx Afeq Aufqoioh 125mm x 100mm x 6mm min 14 – 36 cycles per minute

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Fodjrzfh Hspfx Afiogh Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 670 mm, table length: 950 mm, drop-through hole in table: 180 mm, power: 7.5 kW (10.20 HP), punching force: 100 t, ram bore: 45 mm, stroke adjustment: 120 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES Fgodpsvtx Injfx Afish • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 100 STROKE ADJUSTMENT RANGE (MM) 10-120 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 50 RAM - REGULATION RANGE (MM) RAM - TABLE DISTANCE (MM) 450 LOWER TABLE DIMENSIONS (MM) 670X950 LOWER TABLE HOLE DIAMETER (MM) 180 RAM TABLE DIMENSIONS (MM) 350X530 RAM MOLD EYEBALL DIMENSIONS (MM) 45 MOTOR POWER (KW) 7.5 WEIGHT (KG) 4600 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER CHANGES CAN BE MADE IN TECHNICAL SPECIFICATIONS IF REQUESTED.

Condition: good (used), Spiral binding machine Swigraph R6 257U, with various tools in Swiss quality, in good condition, available immediately Fodjtukn Depfx Afiegh If you are interested, we will be happy to inform you about other machines in our company. You are welcome to view the machines at our premises by prior appointment.

Condition: good (used), Case maker Kolbus Model DA36 Minimum size 110 x 155 mm Maximum block size 405 x 560 mm Spine size 8 -80 mm Speed Machine can run 14-15 cases a minute in it´s current condition Formats that we do mostly on the machine are A4, A5, B5, B6 The machine can work with paper and PU leather materials. Fsdpfx Ajuauivsfiegh The machine is in operation and can be tested until September 2024, after that we install a new machine so the test will not be possible Location: Serbia

Condition: new, Year of construction: 2025, throat depth: 320 mm, table width: 920 mm, table length: 660 mm, pressing force: 160 t, ram bore: 55 mm, power: 15 kW (20.39 HP), punching force: 160 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction frame • 4-sided supported guideways • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Automatically adjustable stroke (for 150–300 ton models) • Light curtain safety barrier • PLC control system • Touchscreen LCD display (for 150–300 ton models) • Dual hand pedal control system • Mechanical safety lock system • Hydraulic safety system (for 200–300 ton models) • Emergency reverse motor operation • Compliant with occupational safety regulations • Vibration damping pads • CE certification • Country of origin: Turkey • Warranty period: 24 months TECHNICAL SPECIFICATIONS: Type: C-type monoblock frame Capacity: 160 tons Throat depth: 320 mm Distance table to ram: 500 mm Distance between slide and table: 540 mm Distance between walls: 500 mm Ram adjustment: 120 mm Approximate press width: 1,600 mm Fjdpfxjvtywds Afiegh Approximate press depth: 2,280 mm Approximate press height: 2,750 mm Front anchoring dimension: 840 mm Side anchoring dimension: 1,300 mm Diameter of table hole: 220 mm Table size: 660 / 920 mm Die fixture slot diameter: 55 mm Ram size: 600 / 290 mm Table height from floor: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1,450 rpm Approximate weight: 7,100 kg • As the manufacturer, we can modify technical specifications upon request.

Condition: new, Year of construction: 2024, overall weight: 640 kg, tool height: 200 mm, operating speed: 10 mm/s, total length: 1,200 mm, total height: 1,230 mm, total width: 550 mm, reverse speed: 10 mm/s, working height: 935 mm, table width: 550 mm, table length: 1,100 mm, stroke length: 190 mm, pressing force: 20 t, Equipment: emergency stop, STANDARD ACCESSORIES Ergonomic Tool Clamping Table Hydraulic Speed and Pressure Adjustment Easily Adjustable Back Gauge Induction Hardened Support Pins NC Control Easy Tool Change MODEL HP 20 Max Pressure At 200 Bars ton 20 Fgjdpfjt H Sw Eox Afijh Bending Capacity Flat Material mm 200×10 Max Stroke mm 200 Height Of Toolings mm 200 Working Speed mm/sec 10 Motor Power kw 2.2 Net Weight kg 640

Condition: new, Year of construction: 2024, overall weight: 1,140 kg, tool height: 200 mm, operating speed: 10 mm/s, total length: 1,300 mm, total height: 1,300 mm, total width: 600 mm, reverse speed: 10 mm/s, working height: 935 mm, table width: 600 mm, table length: 1,200 mm, stroke length: 290 mm, pressing force: 40 t, Equipment: emergency stop, STANDARD ACCESSORIES Ergonomic Tool Clamping Table Hydraulic Speed and Pressure Adjustment Easily Adjustable Back Gauge Induction Hardened Support Pins NC Control Easy Tool Change MODEL HP 40 Max Pressure At 200 Bars ton 40 Fsdet H Sxcepfx Afiogh Bending Capacity Flat Material mm 250×16 Max Stroke mm 300 Height Of Toolings mm 250 Working Speed mm/sec 10 Motor Power kw 4 Net Weight kg 1190