Used Blister Packaging Machine for sale (88,828)

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. Gtodpoukxwmofx Agbst The tensioning mechanism is electrically triggered. Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Good condition

Condition: excellent (used), The machine is complete, not connected; prior to disconnection, a video was recorded and is shown in the listing. Year of manufacture: 2021 Serial number: SM.022-20 Supported carton dimensions: Variant 1: External: 600 × 595 × 150 mm Internal: 590 × 590 × 145 mm Gjdew U Szzepfx Agbstt Variant 2: External: 600 × 595 × 133 mm Internal: 590 × 590 × 128 mm

Condition: ready for operation (used), An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Gjdpfxexf Iihs Agbjtt

Condition: good (used), Year of construction: 2009, operating hours: 9,540 h, functionality: fully functional, machine/vehicle number: 1310146, type of input current: three-phase, total length: 6,700 mm, total height: 1,800 mm, total width: 1,500 mm, ULMA Artic C Flow Pack Machine A high-performance horizontal packaging machine, designed for vacuum or MAP (Modified Atmosphere Packaging) applications. Designed for packaging fresh meat, poultry, cheese, bakery products, and other perishable items. Gtjdpfjwxlmmjx Agbjt High-speed automatic packaging with hermetic seals for extended shelf life. Maximum speed: Up to 80-100 packs per minute (depending on product and film type). Film type: Heat-sealable films, shrink films. Utilizes hot air technology to uniformly shrink the film around the product. Ensures a tight, wrinkle-free package appearance. Adjustable temperature and airflow settings for optimal shrink results. Material: Stainless steel construction for hygiene and durability.

Year of construction: 2025, condition: new, functionality: fully functional, VFFS Incline Packaging Line for Vegetables, Frozen Products, and Non-Standard Size Items. Conveyor scales designed for weighing individual pieces of irregularly shaped products. Once the operator sets the desired product quantity via the control screen, the required number of products is manually loaded onto the scale. The machine then selects the optimal weight from the 12 integrated scales and automatically transfers the weighed product onto the conveyor, which delivers the finished batch to either the packaging machine or to a container of your choice. This dispenser functions either as a fully independent standalone unit or as part of an integrated packaging system. The equipment is designed for easy disassembly, ensuring convenient and efficient cleaning with minimal downtime. Typical applications include packaging: • Larger irregularly shaped products such as frozen fish, meat, vegetables, etc. Gjdperqfmlsfx Agbett • Suitable for dispensing non-food items that do not conform to standard shapes. The system may be offered as a complete line or as individual units, with all modules capable of autonomous standalone operation.

Condition: excellent (used), Year of construction: 2021, For Sale: Horizontal wrapping / packaging machine. Barry Wehmiller Packaging Systems. Schib packaging machine Type: CO 50 TG Year: 2021 Control: Allen-Bradley Servo-driven control Includes: LINX brand labeler Complete system, in excellent, near-new condition! Only 3 years in production. Incl. infeed conveyor belt. Length: 11.50 meters Width: 0.65 meters (It is possible to shorten the infeed/conveyor belt if required) Packaging machine dimensions: 2.75 m x 1.40 m x 2.10 meters. Product dimensions: Gtjdpow Rkxksfx Agbet Length 50 / 480 mm Width 5 / 200 mm Height 1 / 120 mm Transport to be discussed. Price: €20,000 EXW (Loading the machine is included) The machine can be inspected at our location. If you have any questions or require further information, please feel free to contact us. Best regards, Leo Holland

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 5050-152-400, type of input current: three-phase, total width: 1,400 mm, total length: 1,900 mm, total height: 2,400 mm, overall weight: 3,300 kg, input voltage: 400 V, Equipment: CE marking, documentation/manual, scorer, type plate available, Machine for the production and packaging of textile wet wipes into plastic-aluminium foil. Pouch material – printed foil PET12/AL10/PE100 Wipe material – nonwoven textile: 70% viscose; 30% polyester Filling liquid – as required, in a volume of 10–20 ml Gedpfoxc Nb Tox Agbett

Condition: good (used), Year of construction: 2002, functionality: fully functional, Used Mailmaster, originally supplied by Nodema to the customer. The machine has been inspected by Nodema and is functional. Machine is supplied without the feeder. A video is available to demonstrate the machine in operation, or it can, of course, be viewed in Weesp. Gsdpfx Ajxc Erzjgbstt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, overall weight: 500 kg, input voltage: 400 V, input current: 4 A, Machine type LW-CM1 Performance from the Italian manufacturer Ramac. It is used for packaging a wide range of products such as nails, screws, nuts, bolts, washers, as well as metal or plastic components, which are weighed or counted by the integrated weighing/counting system. The LW-CM1 Performance weighing/counting system delivers high versatility, precision, and speed thanks to the combination of independent linear vibratory feeders for the coarse dosing phase, along with a counting module for the fine dosing phase. It is integrated with a system for feeding cartons for filling with the weighed items, as well as receiving filled cartons afterwards. By entering 'Ramac LW-CM1' in the search bar on the manufacturer’s website, you can find a video showing the exact operation of this device. The operator panel supports English, Italian, and Polish languages. Complete technical documentation from the manufacturer is included. The machine is in excellent condition, with very low usage due to a change in packaging concept and method. It comes with three carton feeders for boxes sized 115 x 65 mm / 120 x 106 mm / 110 x 120 mm. The set includes everything shown in the diagram: hopper, feeding conveyor, machine with scale, and discharge conveyor. Gtedpfx Agexcu Sdsbst

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 10387A, input voltage: 400 V, type of input current: AC, Recently acquired through site purchase. Automatic robotic fruit packaging machine Gtsdpfx Agsxcndgobet Utilizes three Staubli TS60 robotic arms See images for details Buyer to arrange for collection

Year of construction: 2004, condition: good (used), Rotary 2-head automatic packaging machine for filling and sealing Godpfxohpt Nxo Agbott pátes and meat stuffing into aluminium cups intended to sterilisation.

Condition: excellent (used), Year of construction: 1999, total height: 1,800 mm, total width: 1,200 mm, total length: 4,100 mm, type of input current: three-phase, overall weight: 950 kg, film width: 600 mm, number of blades: 1, product height (min.): 2 mm, product height (max.): 100 mm, product width (max.): 100 mm, product length (min.): 100 mm, product width (min.): 40 mm, product length (max.): 450 mm, working height: 850 mm, year of last overhaul: 2021, For sale: Very well-maintained Fuji horizontal packaging machine. Model: FW3410 Year: 1999 Last upgrades / major maintenance: 2021 Capacity: 10 – 300 packs per minute Condition: very good Including transformer Documentation and electrical diagrams available Film width: 100 – 600 mm Cut-off length: 100 – 450 mm Product height: up to max 100 mm Product width: up to max 100 mm Dimensions: 4140 mm x 1115 mm x 1615 mm Weight: approx. 1000 KG Heating: 2.42 KW Power: 1.87 KW It is possible to inspect the machine on-site. Gjdpew Nw Snsfx Agbjtt Price: €11,000 EXW (Loading of the machine is included) Transport can be arranged by agreement. If you have any questions or remarks, please feel free to contact us. Best regards, Leo Holland

Year of construction: 2011, condition: ready for operation (used), Simionato packaging machine. Located locally in Hungary (EU), Vacegres. Gtedpfx Agsxcf U Asbot

Condition: good (used), Description: The Benhil 8311 Junior Butter Packer is a flexible and easy to use machine with very little service required. The machine is mainly driven by one motor with a frequency inverter regulating the speed from 0-40 pcs per minute. The low running cost and flexibility on production speeds makes this machine ideal for small and medium butter producers providing value to your butter. The machine was fully refurbished by Benhil in 2004 and again refurbished in 2022 by Dairy Machinery UK . Technical Details : Make Benhil Model: 8311 Junior Usage: Butter filling & wrapping Capacity: Up to 40 packages/min Product : Butter /Lard/ Cheese Product weight: 100- 250 g S.N : DM8311UK Product Dimensions : 110 x 60 x 40 Hopper with 2x screw augers Aluminium hopper andaugers Material : Parchment paper or Foil Greasing : Semi auto Condition : Good Gtjdpsvbgguefx Agbet Location : In Stock

Condition: like new (used), Year of construction: 2020, functionality: fully functional, A SOCO System T-55 from 2020 is now available – a robust and reliable semi-automatic case sealer for cartons of varying sizes. This carton sealer was manufactured in 2020 but has only been used during Black Friday peaks, meaning it has seen very limited use and is in excellent condition. Gsdexbcx Ajpfx Agbett The machine is ideal for warehouses, packing stations, and production lines handling a high throughput of corrugated cartons. It is equipped with both upper and lower tape heads that automatically apply packing tape to the top and bottom, ensuring a professional and secure seal every time. The machine is easy to operate, requires minimal maintenance, and reduces both packing time and physical strain for operators. It is perfect for companies seeking to streamline their packaging process, and it integrates easily with conveyors and packing stations. Available for immediate delivery. Shipping costs apply. Manufacturer: SOCO System Model: T-55 Year of manufacture: 2020 Length: 1,050 mm Width: 850 mm Height: 1,350 mm Carton size (L x W x H): 150–∞ mm x 120–500 mm x 120–500 mm Tape width: 48–72 mm Weight: 120 kg Power supply: 400 V

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. Godpfovubapjx Agbott The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: new, Year of construction: 2025, Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc.. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 620mm; bag length: 100-380mm; bag width: 110-300mm; max. speed of the machine in neutral: : max. 20 cycles/minute; compressed air: 0,36m³/6bar; power: 220V, 3kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Gsdpsv Nm Alefx Agbjtt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 1.200mm; bag length: 100-800mm; bag width: 290-590mm; max. speed of the machine in neutral: 12 cycles/minute; compressed air: 0.8m³/6bar; power: 220V, 6kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Gsdpfx Aev Nm A Eogbett Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62.5x50 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-21g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 80x70 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 28x24mm; thread length: 210mm; power supply: 220/380V; power consumption: 2.5W; machine dimensions LxWxH: 1688x1330x2205 mm; weight: 1210kg. Gtodpfxsv Nm Sgs Agbet

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 10cm³; tea bag dimensions LxW: 65x62.5 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-20g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 82x75 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 28x24 mm; thread length: 220 mm; power supply: 220/380V; power consumption: 2.5W; machine dimensions LxWxH: 1688x1330x2205 mm; weight: 1210kg. Gsdpfx Agev Nm Smobett

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 10cm³; tea bag dimensions LxW: 65x62.5 mm; roll width tea bag material: 125 mm (optional 140 mm); suitable tea bag material: 16.5-21g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 82x75 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 26x24 mm; thread length: 220 mm; power supply: 220/380V; power consumption: 3kW; compressed air required: 0.6 MPa; compressed air consumption: 100-300l/min; machine dimensions LxWxH: 2840x122x2205 mm; weight: 1410kg. Gtodpfx Agsv Nm Stsbst

Condition: new, Year of construction: 2025, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 05 cycles per minute; dosing volume: max. 20cm³; tea bag dimensions LxW: 75x75 mm; tea bag capacity: 5-8g; roll width tea bag material: 155 mm; suitable tea bag material: 16.5-21g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 82x75 mm; sachet material: heat sealable mono films or laminated composite film; power supply: 220/380V; power consumption: 3kW; compressed air required: 0.6 MPa; compressed air consumption: 100-300l/min; machine dimensions LxWxH: 2800x1310x2250 mm; weight: 1410kg. Gjdpfsv Nm S Hsx Agbjtt

Condition: new, Year of construction: 2025, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62.5x50 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-21g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 80x70 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 28x24mm; thread length: 210mm; power supply: 220/380V; power consumption: 2.5W; machine dimensions LxWxH: 1688x1330x2205 mm; weight: 1210kg. Gedpfov Nlh Hsx Agbjtt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic pyramid tea bag forming and filling machine including volumetric dosing unit. Generally it is suitable for common rectangular tea bags or pyramid tea bags. Bag forming method: ultrasonic welding. Tag and thread must already be incorporated into the film. - Specifications: max. speed of the machine in neutral: 50 cycles per minute; dosing volume: 5~40 cm³; tea bag capacity: 1.5-10g; tea bag dimensions: pyramid bag: 50 / 60 / 70 / 80 mm, rectangular bag: LxW: 50x50 / 60×58 / 70×65 / 80×72 mm; roll width bag material: 120 / 140 / 160 / 180 mm; suitable bag material: P.E.T / nonwoven / nylon fabric; power supply: 220V, 50/60Hz; power consumption: 1.2kW; compressed air required: 0.6 MPa; compressed air consumption: 100l/min; machine dimensions LxWxH: 944x1130x2100 mm; weight: 420kg. Gedpfxev Nliwo Agbett Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 7 cycles/minute; bag width: 100-300mm; bag length: 100-350mm; compressed air: 0.2m³/min, 6.5bar; power: 220V, 1kW, 1 phase; dimensions of the machine: L1754xW510xH1617mm. Gtodsv Nlllspfx Agbot Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.