Used Blastrac Bgs 250 for sale (10,172)

Condition: good (used), Year of construction: 1980, Table dimensions 1.100 x 760 mm Motor output 4,7 kW Kodpfoxzuwwjx Ad Newt Spindle diameter 30 mm reus 3.000/4.500/6.000/9.000 U/min

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Kodpfexzuxnex Ad Njwt Motor output 5,5 kW Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Condition: used, total length: 7,400 mm, Year of construction: 2006, load capacity: 25,000 kg, Allrad Antrieb All Terrain NEW Service Ksdpfeycl D Esx Ad Njwt

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Kedpfevl Skajx Ad Newt Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: like new (used), Year of construction: 2017, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Kwodeu Epy Njpfx Ad Net Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 12.500 h

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Kjdpfx Ajv T Ilvod Njwt Storage location: Bad Wimpfen

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Storage location: Nattheim Kedsvvi R Ejpfx Ad Nowt

Condition: used, total length: 5,570 mm, Year of construction: 2023, load capacity: 25,000 kg, Crane Kodpeyb Tlnjfx Ad Njwt JMG MC 250 Drive Electric Year built 2023 Lifting weight (kg) 25,000

Condition: used, Year of construction: 2006, x-travel 800 mm Kwsdpfjyb S H Rex Ad Net y-travel 800 mm z-travel 800 mm Control Siemens 840 D total power requirement --- kW weight of the machine ca. 19,0 t dimensions of the machine ca. --- m

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used 4-meter CNC press brake from Bystronic Type: Xpert 250 4100 Capacity: 4100 x 250 tons Year of manufacture: 2009 MMC ByBend Control Kdobngewmdq Toqquqjg Y1, Y2, X, R, Z1, Z2 + DeltaX CNC controlled CNC hydraulic crowning Bending aid Kedjybb Nnspfx Ad Nowt Automatic tool clamping, RFA model

Condition: new, The DSB 250 D is a robust tool grinder designed for efficient sanding, grinding, and deburring of metal parts and tools, making it a vital addition to any workshop within the Grinding Machines category. This industrial-grade equipment features a heavy-duty design with a rigid cast-iron body, ensuring minimal vibrations and optimal results. Equipped with a powerful 0.9 kW motor, it delivers a speed of 2,950 rpm and maintains quiet operation thanks to its balanced rotor and premium bearings. Safety is prioritized with an emergency stop switch and a safety observation shield. The machine is supplied with a sturdy base and two universal corundum wheels, providing everything you need for effective performance. Built to withstand rough workshop conditions, the DSB 250 D promises durability and longevity. For those seeking a reliable tool grinder in the tool grinders category, you can request a quote today. Kodewub Hhspfx Ad Njwt

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit Kodpjx D Rqrofx Ad Nowt • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW Kodpfxeyaq Idj Ad Newt - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2011, This HOLZMA HPP 250/38/38 panel saw was manufactured in 2011. It features a main saw motor of 9.2 kW and a scoring saw motor of 1.1 kW. It can handle a maximum panel width and length of 3800 mm. Equipped with 8 clamps and 3 air cushion tables, it runs on Windows XP with CADMATIC 4 software. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Scoring saw motor: 11 kw • Max panel width: 3800 mm • Max panel length: 3800 mm • Max main saw blade length: 75 mm • Number of clamps: 8 • Number of air cushion tables: 3 Kodpoyaqhdjfx Ad Nowt Extra Information Control Unit Operating system: WINDOWS XP Software: CADMATIC 4

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret Kwjdpfxsyaqczo Ad Nst - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: used, Year of construction: 1989, pressure 250 t Kwjdpfxsvut Nce Ad Net stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, material width 250 mm material thickness 0,5 - 4,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm number of draw-in rolls 2 power requirement 3,8 kW Weight 0,8 t Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m with infinitely variable drive Kwedpfx Asvzxn Rsd Nst

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm daylight 1200 mm table surface area 1650 x 1250 mm die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m Kedpfx Adsv Svb Ao Nswt height above floor 4,0 mm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Condition: new, Year of construction: 2025, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 3500 x 8000 mm Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw Ksdpfx Ast Hytbod Njwt From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg Kwodpouddpgefx Ad Njt total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l Kedpfxoyalpcj Ad Nswt

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2515308, overall weight: 2,177 kg, total length: 1,500 mm, total width: 800 mm, total height: 720 mm, motor manufacturer: Mycom, Refurbished Mycom 250VLD 5.8 R717 / Freon screw compressor. Ksdpox A S Rqefx Ad Nowt

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm Ksdpsubbryefx Ad Nswt - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: VM-WO-250-90-0-2-AAM00064R, total length: 1,600 mm, load capacity: 250 kg, throat depth: 650 mm, Schmalz plate vacuum lifter, original packaging, year of manufacture 2024, with two suction pads, maximum plate load of 250 kg. Boom arm swivels 180°, up to 3500 mm. Suction plate design: transverse orientation. Suction pad length: 550 mm, width: 200 mm, quantity: 2 pcs. Accessories: Spiral hose for compressed air supply: 2500 mm, compressed air supply length to crane: 12 m, number of hose connections: 2 pcs. Weight: 0.00178 kg. Customs tariff number: 84289090. Country of origin: Germany. Kwjdpfx Ajycva Rjd Nst

Condition: used, Year of construction: 1995, machine/vehicle number: 253057, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Ksdjycu Imspfx Ad Njwt The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane