Wheel Blast Machine

Modena CM T10

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-240014, This Voortman band saw is designed for the economical sawing of steel profiles up to a profile size of 1000 mm and a profile length of 19,000 mm. This horizontal band saw is designed for miter cutting on both sides. The profile length to be processed (X-axis) is positioned in the band saw using a measuring carriage. Djdpfx Abjr Hrrls Tswf

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Dwodpfx Asvcbg Ssb Tof Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball Djdpfspbbc Hox Ab Tswf - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are selling an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 benchtop model Config: E1-F1-G1 50KN Year of manufacture: 2022 Weight: 151Kg Load transducer: 50KN 2530-50kN/165541 Load transducer: 5kN 2530-5kN/166885 Last service and calibration August 2024 Next service and calibration August 2026 The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring the patent-pending Instron operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are suitable for performing tensile, compression, bending, peeling, puncture, friction, shear, and numerous other tests and can be used with a wide range of clamping devices and testing fixtures from our extensive accessories catalog. Total height: 1604mm Maximum vertical test space (daylight test - from base to bottom of crosshead): 1198mm Test type: Tension, compression, and zero-crossover operation Basic control mode: Displacement control Load capacity - kN (lbf): 50 (11240) Maximum speed - mm/min (in/min): 508 (20) Minimum speed - mm/min (in/min): 0.05 (0.002) Maximum force at maximum speed - kN (lbf): 25 (5620) Maximum speed at maximum force - mm/min (in/min): 254 (10) Return speed - mm/min (in/min): 508 (20) Crosshead speed accuracy: ± 0.2% of the set speed at a steady rate and without Load Travel (Crosshead Position) Display Accuracy: In no-load condition, ±0.02 mm (0.0008 in) or ±0.10% of the displayed reading, whichever is greater. Travel (Crosshead Position) Repeatability - mm (in): ±0.015 (0.0006) Load measurement accuracy: ±0.5% of the reading up to 1/200 of the force transducer's rated force. Dodpfx Abjwz Ikto Tjwf Strain measurement accuracy: ±0.5% of the displayed reading up to 2% of the full scale value, with an ASTM E83 Class B or ISO 9513 Class 0.5 strain transducer.

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Dwjdpfjuk Ehxox Ab Tof

Year of construction: 2004, condition: excellent (used), Belt Monorail Shot BBlaster Brand: Rösler Drum ø: 400mm Pieces length max.: 700/1000mm Pieces max. kg: 12 kg Loadingcapazity: 100kg Wheels: 4 Pieces á 7,5 kW Total Power : 45kW Dodpjn E Tubjfx Ab Tjwf Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre OPTIONAL: Lieferung in Ihr Werk Richtmeistermontage / Inbetriebnahme / Schulung

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Dwodpelf Hq Nefx Ab Tef Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Dwedpfx Abou S Ahqo Tsf Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: as good as new (ex-display), Year of construction: 2025, Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapor extraction incl. condensate recirculation Dwsdpshl H Uujfx Ab Tof Parts washer is as good as new (test plant/technical center) This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Condition: new, Year of construction: 2025, Pressure blasting cabinet DSK 15.15.20.RB75 with or without roller conveyor. Blasting chamber W=1150 D=1150 H=930mm. 1 TÜV-tested pressure vessel 20l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Dust extraction filter 2000m³/h 2,2kW Djdega I R Eopfx Ab Tewf