Used Biesse Rover 321 R for sale (326)

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Iijdpfx Afew D Dhaeieh

Year of construction: 2001, condition: used, SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm Iijdpfsh U R Suex Afioh - tool changer 9 slots - ISO 30 - drilling head 16 spindles - saw blade group - axe C - Vacuum pump Becker 100 mc/h - n. 6 working consoles - 7.5 bars - CE (year 2001)

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive Iiodpfowwnf Nsx Afieh PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Iijdpew Idgijfx Afioh Total number of drilling spindles: 32 Total number of tool changer positions: 28

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 140 mm, feed rate X-axis: 75 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: XNC, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of spindles: 1, number of slots in tool magazine: 7, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Biesse Rover 23 woodworking center – fully equipped Still in use to this day, 1 to 2 days a week, but for sale due to business closure in Slovakia. Always well maintained. ✅ Powerful performance Milling spindle with ceramic bearings (11 kW) Adjustable speed: 1,000 – 24,000 rpm Drilling head with 10 vertical and 6 horizontal drills Circular saw on the X-axis ✅ Efficient & flexible Iiodpfow S Edwjx Afijh Pneumatically adjustable vacuum pods in 6 rows, 3 per row 100 m³ vacuum pump Tool magazine with 7 positions (ISO 30) All adapters and tools included ✅ User-friendly Conveyor belt for automatic chip removal Immediately operational, fully equipped 📍 The machine is located in Slovakia and must be disassembled and collected by the buyer on site.

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Iijdpfx Afslc Dwnjioh Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 From location

Condition: used, XNC Numerical Control Working range on X axis mm 3400 Working range on Y axis mm 1300 Working stroke in Z axis mm 155 N ° 2 work fields Bar worktop No. 8 manually adjustable bars for suction cup support with display for viewing working heights No. 8 pneumatic bakelite bars for lifting the panel No. 3 manually adjustable suction cups for each bar with vacuum seal for fixing the panel during assembly processing No. 1 vertical electrospindle with C-axis Vector, with automatic tool change, Iso 30 type cones, flange for use aggregates Automatic tool change system with 3 positions for aggregates positioned on the side Automatic tool change system with 20 positions and chain Drilling head with mandrels arranged as follows: - No. 10 verticals on X axis - No. 12 verticals in Y axis - N° 6 horizontal on X axis - No. 2 horizontals on Y axis Front protection and safety system with carpets Perimeter protection grids Motorized carpet for chip evacuation Vacuum pump Iiodpfx Afov Edggoish

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Iiodpfx Afew Rpd Soijh Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine BIESSE Akron 425 A-R Year 2009 Iedpfx Afjiu U Swjieih Configuration: Edge height 8 - 65 mm Edge thickness 0,4 - 8 (12) mm Edge banding, End cutting saws pneumatic adjustable Tilting milling Radius scrapers R2 Polishing brushes Hot-air blower TOP condition, possible to test !

Condition: excellent (used), "NESTING" CELL with 4-axes (X-Y-Z-C) CNC working Center, composed by: K09040A) AUTOMATIC LOADING/IN-FEEDING SYSTEM (type B) also for thin panels, with scissor Iiodeifz Smjpfx Afieh table, movable arm (Sweeping Arm) with vacuum suction cups, K09040B) CNC "nesting" (flat table) "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control BH660 (WRT) with Software bSolid (3D CAD-CAM) + bNest Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with two (2) Tools storage plates 1st Tools storage plate with 16 folds (on X axe) + the 2nd (revolver-type) with 8 folds (on Y-axe) Min. useful working area (X - Y - Z) mm 3100 x 1560 x 170 No. 8 Working areas (Multizone) - No. 3 Vacuum pumps (capacity 250 m3/h each) Separate electric and command cabinet - Total installed power (Kw) 39,45 WORKING GROUPS (TOP): No. 10 Independent vertical boring spindles (5 in X + 5 in Y) Drilling head BH 10 motor-power (Kw) 3 No. 1 Aggregato HSK F63 as Circular Saw (max. diam mm 215) No. 1 Vertical electro-spindle HSK F63 (C-axe at 360° - MK259), motor power (Kw) 19,2 K09040C) AUTOMATIC OUT-FEEDING SYSTEM (type 1536) with motorised belt (length mm 4410)

Condition: used, functionality: unexamined, Ferwood Code: RU0001430 - Manufacturer Code: H0102D137 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Iiodpfx Afswt Aiujieh

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, MACHINERY READY DELIVERABLED, FREE SALE WITHOUT CONFIDENTIAL DEBUILDING OF THE WORKING CENTRE DOT-IN-POT with 3 axes3 Yaskawa electronic drivesNumerical control NC 400 PlusHole area 1,600 x 845 MMPfor larger panels, machining is carried out in 2 phases with double positioning, first to the left and then to the right, continuing the drilling precision10 Independent vertical drills with 32 mm.4 pitch. Horizontal drills ( 2 dx 2 sx )2 Horizontal drills ( 1 ant 1 post )1 blade unit for channels in XP dry vacuum pump axis New safety equipmentRevised machinery similar to the new one Iiedped Tq Iwsfx Afijh

Condition: used, Numerical Control NC 1000 Software Biesse Works Working field in X axis 3685 mm Working field in Y axis 1290 mm Working stroke in Z axis 200 mm - piece passage 70 mm FT nesting full plane worktable Automatic loading system with side lifting table N ° 1 vertical electrospindle, with automatic tool change, Automatic tool change system with 18 positions - positioned on the rear of the machine Boring head with independent spindles arranged as follows: - N ° 7 vertical in X axis - N ° 7 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE Iiodpfxewufv Ts Afioh

Condition: good (used), Year of construction: 2007, machine/vehicle number: 94323, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, total height: 2,400 mm, total length: 4,400 mm, total width: 2,800 mm, overall weight: 3,130 kg, I will sell a MACHINING CENTER IN CONTINUOUS OPERATION CNC machining center Biesse ROVER 3.03 functional to view in Wadowice Iodpfjwpthtex Afisih Feed X 3060 mm Feed Y 1260 mm Feed Z 150 mm Control type CNC XP 600

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Iiodpfxoh Txlce Afioh Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Work surface size: 5000×1600 8 bars with 4 carriages each with automatic positioning N. 2 ES959 electrospindles – HSK F63 air-cooled 13.2KW Rpm: 24000 Electrospindle stroke: 410mm Drilling head: BHZ111F with: 12+4V 60mm; 6H 75mm; 1L 60mm; d10; 1.7kW Automatic lubrication Drilling unit stroke: 371mm Tool magazine on the edge of the carriage: 22 places Magazine on the edge of the carriage: 4 places Magazine on the outside edge: 2 places Aggregates: Aggre109(BRUSH); Aggre44(LAMA215); GROTEFELD (L_GROT, S_GROT) Iijdpfxowr Tive Afijh Devices: n.2 x Agg117 (edge ref., edge scraper, glue scraper); Aggre99 (edge ref.) Tools: R/L Gleaner Vacuum pumps: n.1 Becker brand oil bath paddles Axle lubrication: Automatic

Condition: used, Year of construction: 2008, Biesse NBC 412 412 Automated cell for nestig complete with loading and unloading system & Rover A 3.40 FT Description: Rover A 3.40 FT Centralized automatic lubrication system 8 front stops + 8 back stops with sensors 1 Rh side stop with sensor Vacuum system for 2 300 m3/h pumps 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Boring head BH 18 A Revolver tool changer with 10 positions Numerical Control XP600 BiesseWorks - Advanced - machine and office version BIESSE NEST Module Arm for pieces loading and unloading, positioned on the machine beam Loading and unloading table, positioned on the LH side of the machining center CE Safety devices 2 m3/h rotary claw vacuum pump Mechanical presser ring with pneumatic lowering , for nesting based application Iodpfx Afewh Sfzoieih (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 1998, condition: good (used), Full composition Iisdpfof Sqyvjx Afieh

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction Iiedpfx Afeugpwnjish No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: ready for operation (used), Technical characteristics En cours de vérification Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Independent Z drilling unit to optimize machining times 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports Isdpfxetqi Uye Afioih 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software Working range in X axis 3600 mm Working range in Y axis 1800 mm N ° 2 work fields Nesting worktable Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel detachment system with suction cups N° 1 3-axis vertical electrospindle, 13.2 kW, with automatic tool change, ISO 30 cone type Automatic tool change system with 16 positions - positioned on the back of the machine Automatic tool change system with 8 positions - on the machine BH 10 drilling head with 10 spindles arranged as follows: Iiedpfx Asqvt D Rofish - N° 15 verticals on the X axis - N° 17 verticals on the Y axis Automatic unloading system with motorized belt Worktop cleaning system Protection and safety system with perimeter grilles Security system with Bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control 250 m3/h vacuum pumps

Condition: ready for operation (used), Technical characteristics Capacity: 6200mm in x 1535mm in y 400mm in z 5 axis electric spindle 11kW HSK63F 10 ATS beam workbench with motorized movement (4 suction cups / beam) 15° rotation on vacuum modules Positioning defined by the numerical control and recorded on each program 14 position chain tool magazine Independent tool changer on the front panel (large diameter / blade) Windows Computer BIESSE WORK staircase software Iiedpfx Afstqkadeish Laser and vices not included Safety conveyor Vacuum pump 250m³/h Ideal for the production of stairs and joinery Power and Motors Pluging: Three-phased Power: 21 Kw Overall dimensions Lenght: 9000 mm Width: 3000 mm Weight: 7200 Kg

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Iijdpfxswgc D Ee Afish

Condition: ready for operation (used), Technical characteristics Machining X 3180, Y 1340 Drilling capacity X 3405, Y 1260 Pneumatic locking HSK63 12 KW 3-axis electro-chuck Displacement 0-100 m / min 0-90 ° blade grooving group 14-pin vertical drilling unit, 6-pin horizontal, 15-inch screen control cabinet included SOFT and control Iiodpfxetqka Tj Afish Machine to be restarted Nombre de ventouses12 Nombre de poutres6 Caractéristiques usinageVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Ijdew D E A Ejpfx Afisih