Dryer dryair Gerco (art.2261)

GERCO GTT 401

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Pgjdeucw S Sjpfx Amyep

Year of construction: 2018, condition: used, Motan dryairtank LBA 400 – H-O-O-Z year: 2018 price: 3.450 € contact: Mr. Rainer Eckerle Psdpfx Amjtphhcoyjgp

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Pgjdpoy Hmfyofx Amyop Condition: As new condition, only 5,290 operating hours.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Pedjygikwspfx Amysgp Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), GT SERIES KNIFE MILLS MACHINES HOUSED IN SOUND-ABSORBING ENCLOSURES, COMPLETE WITH BIG-BAG STATION Psdpfeudyghox Amysgp OPEN ROTOR WITH V-CUTTING SYSTEM THE FOLLOWING MILL SIZES ARE CURRENTLY AVAILABLE IN STOCK GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM MAIN MOTOR 15KW ROTOR EQUIPPED WITH V-SHAPED KNIVES

Condition: like new (used), Year of construction: 2019, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 10804, overall weight: 3,800 kg, rotor diameter: 500 mm, number of blades: 5, total length: 2,100 mm, total height: 3,878 mm, total width: 2,283 mm, rotor width: 1,000 mm, power: 52.5 kW (71.38 HP), filling opening width: 1,200 mm, filling opening length: 1,200 mm, input voltage: 400 V, Includes 1 set of new knives, various screens, extraction fan, and cyclone filter. Pjdpfeyrc E Eex Amyogp

Condition: excellent (used), Year of construction: 2013, Control system: UNILOG B6 Closing force: 4500 kN Distance between columns: 950 × 700 mm Minimum mold height: 330 mm Maximum mold height: 780 mm Screw diameter: 65 mm Injection pressure: 2070 bar Maximum injection weight: 980.9 g Injection unit: ServoElectric (Knodler) Injection speed: 400 mm/s Servo package S0 ServoPower package S1: hydraulic pump speed control for increased energy efficiency Integrated filter unit: Yes Ejector type: Electric Ejector force: 60 kN Pgsdpfxeytfqas Amyep Ejector stroke: 180 mm Additional equipment: Air valve Cooling water flow regulator Digital interface for temperature controllers (control of up to 6 thermoregulators) Interface for nozzle needle shut-off control in the mould Interface for external hot runner controller Full integration for Wittmann W8xx series robot Quality control button Language: Polish

Condition: used, Year of construction: 2018, TEDERIC D450/3200 injection molding machine with SW7315DS robot Manufacturer: TEDERIC Model: D450/3200 Year of manufacture: 2020 Serial number: T3045-0141 Robot: SW7315DS Pjdpfxezii Efj Amyjgp Robot year of manufacture: 2018 Technical data Clamping force: 4,500 kN Screw diameter: 75 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 780 × 780 mm Minimum mold height: 300 mm Maximum mold height: 780 mm Maximum platen spacing: 1,580 mm Maximum opening stroke: 800 mm Injection volume: 1,741 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 56 kW Heater power: 39.1 kW Screw diameter: 75 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Total operating hours: 42,864 h Automatic operating hours: 16,386 h SW7315DS robot (2018) included.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm Pgjdpfsyfq Aljx Amyjp • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Pgjdpozma Avefx Amysp Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection