Used Benford 3000 for sale (4,639)

Year of construction: 1996, condition: ready for operation (used), There are two Thermoforming Machines TETRA LAVAL 3000 available, current: 30A, voltage: 380V, yera of construction machine 1/ 2: 1995/ 1996. Nkedpfsgbft Rox Ahveu

Year of construction: 2011, condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Nkodjt Nhm Ispfx Ahvsu

Condition: ready for operation (used), A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible. Nkodevr Edaepfx Ahveu

Condition: ready for operation (used), Year of construction: 2010, An oil and emulsion mist separator Umwelt Lufttechnik is available. Extraction capacity: 1200m³/h, fan capacity (free-blowing): 2000m³/h, negative pressure: 850Pa, min. separation efficiency: 99%, machine dimensions X/Y/Z: approx. 700mm/500mm/1150mm, weight: approx. 100kg. An on-site inspection is possible. Nksdpexnp Spofx Ahvju

Condition: ready for operation (used), Year of construction: 2009, A complete packaging and palletizing line for buckets is available. 1) Vollenda 2VNES2-6-E bucket filling machine, year of manufacture: 2009, bucket formats: 2kg-5kg, filling capacity 2kg/5kg: 1200/800 buckets/h. 2) Palletizer Ehcolo EPL 160, year of manufacture: 2009, empty pallet magazine positions: 15, max. pallet dimensions X/Y/Z: 800mm/1200mm/1500mm, palletizing capacity 2kg/5kg pails: 800/1200 pails/h. 3) Wrapping machine Robopac Rotoplat 3000HD, year of construction: 2009, max. rotation speed: 12 rpm, max. wrapping height: 2400mm, power: 11kW, weight: approx. 1400kg. Documentation available. On-site inspection is possible. Nsdpfx Ahsumwgrovjku

Year of construction: 2000, condition: ready for operation (used), Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible. Nkjdpfx Ahsurwyvovsu

Year of construction: 2022, condition: ready for operation (used), Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible. Nkedpfxjwcf R Tj Ahveu

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Nedpsxr Nvcofx Ahvoku

Condition: ready for operation (used), Year of construction: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible. Nksdpfx Ajv Rfqqohvsu

Year of construction: 2010, condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Nsdpfx Ahouy T Ndsvsku

Year of construction: 2009, condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Nksdpfx Aheuy T I Hjvsu

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Nkjdpfox Ih D Tsx Ahvju

Year of construction: 1972, condition: ready for operation (used), A horizontal double-sided face and surface grinding machine Diskus is available. Grinding wheel diameter: 600mm, grinding wheel width: 150mm, workpiece dimensions X/Y: 1600mm/3000mm, machine dimensions X/Y/Z: approx. 5000mm/5000mm/3000mm, weight: approx. 11000kg. Documentation available. On-site inspection is possible. Nksdpsw Azu Uofx Ahveu

Year of construction: 2013, condition: ready for operation (used), An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible. Nsdpfx Ahex H S Nwsvoku

Year of construction: 2001, condition: ready for operation (used), Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible. Nksdpfx Ahjw U Dv Revou

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Nedpfx Ajxgfbqshvjku

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Belt grinding machine Manufacturer: cEM Italia Motor: 4.7 kW 14 and 28 rpm Nkjdpoxlqw Ijfx Ahvou Electric up/down adjustment Electric right/left rotation With special grinding table Weight: 550 kg

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, turning diameter: 1,350 mm, turning length: 3,000 mm, Status: during general overhaul. The PORĘBA TR series lathe is a universal machine tool intended for both roughing and finishing operations. It is particularly suitable for machining shafts as well as heavy, large-size workpieces. The offered machine is currently undergoing a general overhaul – the last photo presents its current stage of refurbishment. The remaining photographs show TR series lathes after general overhauls performed by our company and delivered to end users. They serve as a reference for the final quality standard and workmanship. Scope of the general overhaul: - Complete dismantling of the lathe - Regeneration and replacement of worn components - Calibration of trapezoidal lead screws and manufacturing of new bronze nuts - Replacement of bearings and sliding bushings, including new spindle bearings Nksdoyh H Iyopfx Ahvou - Grinding of bed, carriage and top slide guideways, followed by scraping of mating surfaces (with application of anti-friction materials) - Regeneration of the tailstock quill - Regeneration of the tool post - Overhaul and modernization of lubrication and coolant systems - Electrical scope: manufacturing of a new electrical cabinet, complete new machine wiring, and replacement of all electrical components with new ones - Inspection of electric motors together with replacement of bearings - New painting - After completion of the overhaul: trial assembly, preliminary acceptance at our workshop, positioning on the foundation, levelling and final acceptance - Adaptation of the lathe to minimum safety requirements in accordance with applicable EU Directives

Condition: new, Year of construction: 2026, Heavy-duty hydraulic guillotine shear for universal use for trade and industry. With the hydraulic table shear GLT from Prod-Masz you can make the perfect cut with every job. - The extending table makes it easier to carry large-sized metal sheets on the table - Support table with graduation - robust and compact steel construction - high quality, durable steel knives - extremely stable and heavy cast iron construction - Ground and hardened guillotine shear knives - Back gauge system with Scala - CE approved quality - Declaration of conformity - for steel plates up to 1.2mm - Open design suitable for endless cuts - Max. Working width: 3000 mm - Motor power 2.2 kW - HL 46 oil - pressure force 4t - Operating pressure 120-150 bar - has hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight about 1000 kg We are looking forward to your contact! Nedpfx Ahec I T E Teveku We issue the invoices with 0% (intra-Community delivery)

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,620 mm, total length: 2,900 mm, 4-way forklift Combilift CBE 3000 Drive Electric Nkjdpfx Ahsyf N Awevsu Year built 2025 Lifting height (mm) 5,620 Lifting weight (kg) 3,000

Year of construction: 2021, condition: good (used), machine/vehicle number: 8716/2021/KPL-3, The device is in good, working condition; available for collection directly from the owner: Green Factory, Zdunowo 48, 09-142 Załuski, Poland Nkodpfsyhzxmsx Ahvju

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,560 mm, total length: 2,900 mm, 4-way forklift Combilift CBE 3000 Drive Electric Year built 2025 Lifting height (mm) 6,560 Njdpfsxn A Iqex Ahvsku Lifting weight (kg) 3,000

Condition: used, tank capacity: 3,000 l, 3000 liter pressure vessel made of V2A stainless steel Nodpfxeyfwtde Ahvoku

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 02.02 - 1936, BAMA 3000 Collator - 6 stations - Crimp-Look stations, - Cobeflex stations, - Inkwell numbering unit (with cams, rings, and folding gears), - Gluing unit, - Punching and die-cutting stations for sheet production with outfeed conveyor, central die-cutting for double production, - etc. Note: Machine complete and in perfect working order, available immediately. Nkjdpfx Ajyhyxlshvju Location: Italy

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,550 mm, total length: 2,900 mm, 4-way forklift Combilift CBE 3000 Drive Electric Year built 2025 Lifting height (mm) 6,550 Lifting weight (kg) 3,000 Nodpfx Ahoyfid Ijveku