Used Bench Lathe for sale (7,516)

Condition: good (used), Year of construction: 1983, year of last overhaul: 2004, Turning center Manufacturer: TRAUB Type: TD36 Year of manufacture: 1983 Rebuilt: 2004 Iodpfxez Hm Sno Ahysbc with: drilling tool holder, material feed system

Condition: used, Multispindle lathe GILDEMEISTER GS 20 Ijdpfx Aoz I Utcjhyjbc

Condition: used, Multispindle lathe GILDEMEISTER AS 48 Ibedpfx Ahoz I Ut Noyoc

Condition: used, Year of construction: 1998, turning diameter 385 mm max. turning diameter 620 mm turning length 958 mm control MSD 501 II Mori Seiki greates pass round over bed 710 mm Swing dia. over traverse guideway 738 mm centre distance 1.125 mm Isdpfx Ahoz Icuujyebc turning speed range - main spindle 10 - 1.600 min/-1 power capacity - main spindel 30 / 22 kW spindle bearing diameter 180 mm spindle bore 130 mm spindle nose JIS A2-11 x-axis 345 (310+35) mm z-axis 995 mm number of toolpositions 12 pos. Shank height for square tool 32 mm Drill shank diameter max. 60 mm turret change time 0,4 sec. tailstock adjustment 850 mm dia. of quill 110 mm taper of center MK 5 quill stroke 150 mm rapid traverse X: 20 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 64 kVA weight of the machine ca. 11,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Lathe MORI SEIKI - SL 400 B / 800 - 11x Turning tool holders

Condition: used, Year of construction: 2006, machine/vehicle number: 76005007 06 0006, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 5,250 kg, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used inclined-bed lathe, manufactured in 2006. The manufacturer is Trens in Trenčín (Slovakia), where the machine is known as the SBL 500 CNC. The 12-station turret has 6 driven stations, allowing for drilling and milling operations to be performed in a single setup. It is controlled by a Siemens Sinumerik 810D. The machine is located in the Düsseldorf area and was running during our inspection. TECHNICAL DATA - Year of manufacture: 2006 (according to the nameplate) - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-station, with 6 driven stations - Main drive: 22 kW, max. 4,200 rpm - Machine weight: 5,250 kg (nameplate) EQUIPMENT AND ACCESSORIES Iodpfx Ahsz H Udxoyobc - Chip conveyor Tsubaki with cable carrier (SRF 040) - Tool holders, equipped - Turning and clamping tools - Setup tools CONDITION The machine was running during our inspection on October 1, 2026. We can send you short videos of the machine in operation upon request. AREAS OF APPLICATION Suitable for shafts, flanges, and housing parts up to 400 mm in diameter, where transverse drilling or surface machining is to be carried out at the same time. LOCATION AND PROCESSING The machine is located in the Düsseldorf area. Inspections can be arranged by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact information for forwarding companies in the region. Price on request. Please contact us via the contact form.

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0210.07382, turning length: 1,000 mm, turning diameter: 350 mm, spindle speed (max.): 3,000 rpm, chuck outer diameter: 315 mm, The Okuma LB 25 is a used CNC inclined-bed lathe, manufactured in 1988, equipped with an Okuma OSP 5020 control. According to the documentation we have, it can handle workpieces up to 1,000 mm in length and has an integrated Okuma Touch Setter. The machine comes with a chip conveyor and oil mist extraction system. It is located in the Düsseldorf area, along with an Okuma LB 15 from 1987. TECHNICAL DATA - Year of manufacture: 1988 - Control: Okuma OSP 5020 - Turning length: 1,000 mm - Turning diameter according to documentation: 350 mm (please verify on the nameplate before purchase) - Chuck diameter according to documentation: 315 mm - Spindle speed max.: 3,000 rpm - Measuring device: Okuma Touch Setter (integrated) EQUIPMENT AND ACCESSORIES - Chip conveyor Knoll 320 S-1 with coolant cleaning Isdpoz H Ugysfx Ahyobc - Extraction system Filtermist F21/8 - Tool turret with holders (as shown in the photos) - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For shafts and turned parts up to 1 m in length, suitable for maintenance and contract manufacturing. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading, and transport are organized by the buyer. Upon request, we can provide contact information for freight forwarders in the region. Price upon request. Please contact us via the contact form.

Condition: used, Year of construction: 2003, functionality: unexamined, center height: 300 mm, center width: 1,500 mm, turning length: 1,500 mm, The Löw W570 is a used, conventional lead and follower rest lathe, manufactured in 2003. With a center height of 300 mm and a turning length of 1,500 mm, it is a robust workshop machine for individual parts and repairs. It is equipped with a Givi Misure ME 620 digital display, and the operating manual is available. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2003 - Center height: 300 mm - Turning length: 1,500 mm Ijdpfjz H Uhqox Ahyobc - Digital display: Givi Misure ME 620 EQUIPMENT AND ACCESSORIES - Three-jaw chuck (as shown in the photos) - Tool holder on the top slide (as shown in the photos) - Tailstock - Tool set - Operating manual for Löw W 490/570 series CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For maintenance, training, prototype construction, and job shop turning, i.e., anywhere where individual parts are turned manually. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact information for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: good (used), Center height: 102 mm Distance between centers: 300 mm Maximum diameter above the carriage: 120 mm Maximum diameter above the bed: 200 mm Spindle bore: 20 mm Collet type: W20 Weight: approximately 450 kg Dimensions: L1200 x W600 x H1400 mm Base: cast iron Equipment: Tailstock, digital cross slide, Tripan turret, tool holder x 3, microscope, chuck, set of 2 drawers, set of collets. Ibjdpfjz Hwffsx Ahysc

Condition: excellent (used), Year of construction: 2010, CNC lathe ECOCA MT-208MC 750 YEAR OF MANUFACTURE: 2010 CONTROL: Sinumerik 828D Technical data: Work area * Swing diameter over bed: 525 mm * Swing diameter over cross slide: 384 mm * Max. turning diameter: 250 mm * Max. machining length: 750 mm * X-axis travel: 175 mm * Z-axis travel: 537 / 787 mm Main spindle * Spindle speed: 750–4,800 rpm * Spindle bore: ASA A2-6 * Spindle bore: Ø 62 mm * Draw tube diameter: Ø 52 mm * Front spindle bearing: Ø 100 mm * Spindle taper: 1:20 * Chuck size: 8 inches * Spindle motor: 7.5 / 9 kW * Optional, according to manufacturer: 9 / 11 kW Axes * X-axis motor: 1.6 kW * Z-axis motor: 3.0 kW * Rapid traverse X-axis: 24 / 20 m/min * Rapid traverse Z-axis: 24 / 20 m/min * Guides: Linear / flat guides (depending on the model) Tool turret * Powered servo turret Baruffaldi * Tool stations: 12 * Tool holder: VDI Ijdpfez Hl Eaox Ahyobc * Max. outer turning tool: 20 mm * Drilling bar diameter: Ø 40 mm Tailstock * Quill diameter: Ø 58 mm * Quill stroke: 88 mm * Tailstock travel: 415 / 665 mm * Quill holder: MK4

Condition: used, Year of construction: 2017, operating hours: 15,186 h, Equipment: documentation/manual, We are offering this used INDEX ABC 65 SL CNC lathe, manufactured in 2017. Machine type: ABC Year of manufacture: 2017 Operating hours (hydraulics): 15,186 Turret 1 with 7 stations, VDI 25, and W-gearing Synchronous spindle with chuck or collet possible! Turret 2 with 6 stations and dovetail mounting Ibedpfx Ahjz Ri Ibsyjc Powered tools on turret 2 Ejection blowing device Transmit function – Teleservice Three rear boring spindles for fixed tools Magazine above the main spindle Conveyor belt Chip conveyor, hinged belt – workpiece removal device – workpiece feed unit INDEX LMI bar feeder magazines If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: XD-16III-CP-0073-H, spindle bore: 18 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 1,500 rpm, type of input current: three-phase, overall weight: 2,200 kg, rotational speed (min.): 10 rpm, Equipment: documentation/manual, Hanwha XD16 III Ibsdszxhwrepfx Ahyec Few operating hours Barloader BMG-20 Chip conveyor with trolley and collector Fanuc control Bar diameter modified to Ø18mm

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Isdpozl D Ruefx Ahyebc Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: used, Year of construction: 2011, centre height 280 mm centre distance 1000 mm turning diameter over bed 570 mm turning diameter over slide rest 340 mm turning length 1000 mm spindle head A8 DIN55027 spindle diameter 1 mm spindle bore 83 mm torque 1600 Nm turning speed range 1-2500 (2 Stufen) U/min worktool system Multifix C Ibsdoz I T Raopfx Ahysc face stroke 340 mm rapid power traverse in X-and Z direction 5 / 10 m/min feed Z / X m / U feeding dorce 10000 / 7000 N tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock quill taper ISO MK 5 total power requirement 15 kW Weight 3550 Kg dimensions of the machine ca. 3,85 x 2,30 x 1,80 m WEILER D3 Control Unit (SIN810D), Three-Jaw Chuck Multifix C Steel Holder, Chip Conveyor, Various Interchangeable Jaws MULTIFIX C Quick-Change Steel Holders

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet Ijdpfewtctyex Ahyobc *

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Ijdpfx Ahsxn R N Aeysbc

Condition: used, Year of construction: 1999, centre height 255 mm Ijdpfxoqzm Nge Ahyjbc centre distance 1080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1000 mm spindle taper KK 8 DIN 55027 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 70 mm turning speed range 2 - 2800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder MULTIFIX Typ B / CAPTO drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m chip conveyor 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp

Condition: reconditioned (used), Gomad wood lathe, type DNXA-40x100 A, after overhaul. For sale: Gomad DNXA wood lathe, Polish-made. Overhauled, with new electrical components and a one-year warranty. Iodozhn Shopfx Ahysbc Turning diameter: approximately 42 cm. Bed length: 132 cm. Tailstock with rotating and eccentric locking. Two sizes of tool rests. Can be disassembled for transport; delivery is possible within approximately 100 km upon agreement. Three turning speeds adjustable by belt. M24 thread on the spindle, making it easy to attach chucks and faceplates. Excellent for learning woodturning. Suitable for both small and large bowls.

Condition: new, Center distance ----- 1500 mm Center height ----- 230 mm Turning diameter ----- 460 mm Main spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Weight ----- 2220 kg INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 tool blocks * 3-jaw chuck, 250 mm * 4-jaw chuck, 320 mm * Faceplate, 350 mm * Stationary and follow rest * LED work light and coolant system * Electric brake Ibjdpfx Aoga Tv Ejhyjc * Foot brake * Box with various tools

Condition: new, WM210V - ROGI VARIO METAL LATHE 230V - Single Phase Turning diameter over bed ----- 210 mm Turning diameter over cross slide ----- 110 mm Center height ----- 105 mm Distance between centers ----- 400 mm Bed width ----- 100 mm Cross slide travel ----- 75 mm Isdpfx Asga Txcehyobc Tool post travel ----- 55 mm Spindle bore ----- 21 mm Spindle nose ----- MK3 Spindle speed range ----- variable, 50 - 2500 RPM Whitworth threading ----- 10 - 44 TPI (8) Metric threading ----- 0.5 - 3 mm (10) Tailstock travel ----- 60 mm Tailstock diameter ----- 30 mm Tailstock spindle nose ----- MK2 Motor power ----- brushless, 600 Watt Weight ----- 75 kg STANDARD ACCESSORIES * 3-jaw chuck, 100 mm - self-centering * 4-way tool holder * Splash guard * Back guard * Chuck guard * Lead screw guard * Tool post guard * Set of change gears * Digital speed display * Fixed centers * Left/Right switch * Tools in a box OPTIONS * 4-jaw chuck, 100 mm - independent * Flange for 4-jaw chuck, 100 mm * Fixed steady rest WM210V * Traveling steady rest WM210V * Faceplate WM210V * Base cabinet WM210V

Condition: good (used), Weipert crankshaft grinding machine Isdpjihfryefx Ahysbc Weipert Grinding bench Centering chuck: Röhm 110 H MK5 Machine length: 4300 mm You can find more grinding machines in various sizes – both new and used – in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, Technical data: Center height 110 mm Center distance 160 mm Ibodoz I Dk Rjpfx Ahyjc Spindle bore 23 mm Motor power 1.7 kW Speed adjustable via potentiometer, approximately 100 – 2,300 rpm 3 preset speeds or 3 gear stages. Equipment: • Operating modes: Manual + Automatic • Pneumatic clamping device • Tilting tailstock with 2 spindles for collet chucks K 12, with switch for changing the direction of rotation (for thread cutting) • Hand lever cross slide with stops, consisting of transverse and longitudinal slides. • Multifix steel tool holder, size A • Collet chuck with collets • Mounting elements and machine light

Condition: new, Year of construction: 2023, DN Solutions LYNX 2100M New machine, never used! 0 operating hours. Technical data: Control: Fanuc 0i-F Plus iHMI-Touch Milling function with C-axis and powered tools (6000 rpm) Bar capacity (mm): 65 Tool holder: BMT45 Turret with 24 positions Max. turning diameter (mm): 300 Max. turning length (mm): 290 Main spindle chuck size: 8" (204 mm) Samchully Max. main spindle speed (rpm): 4500 Main spindle power (kW): 15 Main spindle torque (Nm): 169.0 Iedpfxez Hxz Uj Ahyebc Travel ranges: X: 205 mm Z: 340 mm Linear guide -CNC tailstock -Tool probe -Parts catcher -Number of powered tools: 4 pcs, 2/2 -Number of standard tools: 8 pcs -Documentation -Knoll chip conveyor, ejection at the front on the right side Dimensions: Length: 2350 mm | Width: 1595 mm | Height: 1693 mm | Weight: 3170 kg

Condition: used, Multispindle lathe INDEX MS25E Iedsz I Utijpfx Ahysbc

Condition: used, Multispindle lathe GILDEMEISTER AS 32 Iodpfjz I Utpex Ahyebc

Condition: used, Multispindle lathe GILDEMEISTER AS 48 Ijdpjz I Uumefx Ahyebc