Combined band / Disc Grinder Fabr. WEMAS type BT 100
Built in 2003
Technical data:
Sanding belt size 915 x 100 mm
Pad DRM. 150 mm
Table size 125 x 190 mm
Power 250 W
Power 220 V 50 Hz
Weight 16 kg
Dimensions L x W x H 520 x 410 x 310 mm
used, in good condition € 350,--similar enclosed brochure!
Iei2vwb
more
Type: T95
Used Machine
table size: 2700mm x 800mm
ElectricTable stroke
clockwise and anticlockwise rotation
H2kq8ud
motor power: 4 kW
Year of construction: 1993
location: Warehouse / 82281 Herrnzell more
Dimensions (Lxwxh) approx.: 4200 x 2000 x 1400 mm
Approximate weight: 1200 kg
Item description:-380 Volt
-Capacity: 4.6 kW
-Table length: 2900 mm
-Table depth: 1400 mm
-more info see pictures
Ecrejf8ge
Suction unit type ASA 2
Built in 2007
maximum air output 2300 m³/h
Motor 2,2 kW
Voltage 400V-50 Hz
more
Working width: 1300 mm
number of grinding units: st.
Wfb2c
Workpiece thickness max.: mm
grinding belt dimensiones: mm
feed motor: kW
feed speed: mm/min
machine dimensions LxWxH: m
weight: kg
For woodworking!!!
pneumatic conveyor guide
height adjustment via hand wheel
EMERGENCY STOP switch
mechanical thickness indicator
grinding wheel adjustment
Roller conveyors (infeed and outlet)
on Sale as is! more
only 1100 h operating hours
ideal for sanding of solid wood
Working width of 1300mm
2 sanding unit
digital display of the clearance height
machine. Thickness adjustment
Pneumatic sanding pad
9kg7acdyd
more
dimensions machine LxWxH 4,5x2,3x2,6 m
Dimensions Pump LxWxH 2,55x1,55x2,0 m
Engine LxWxH 2,1x0,8x1,0 m
Max. working width 900 mm
Narf70zv
grinding belt dimensions 930x1900 mm
Dish washer slide. Standard 1220 mm
table opening 0 - 75 mm
1. Aggregate W 11 kW
2. Aggregate RD 7,5 kW
Frequency controlled feed Motor 2,2 kW
1. Aggregate Speed 8 - 22 m/sec
2. Aggregate Speed 10 - 22 m/sec
Frequency controlled feed rate 1 - 10 m/min
Pump Paper filter system 0.8 bar 200 l/min
Separator pump and filter pu... more
Type: WIN630
used machine
working width: 630 mm
9goa8vigq
combi unit
contact roller steel
sanding pad
motor power: 7,5kW
Year of construction: 1997
location: Warehouse / 82281 Herrnzell more
Long belt Jacob T 95 with lighting and band blowing
Electric table hub
Drive motor 4 kW
R/L barrel
Lighting
Big band rollers diameter 290 mm
Large model T 95 on both sides bend approx. 550mm, thus also long parts editable
Table size 2780 x 950 mm
Workpiece passage height approx. 340 mm
Schnellwechselschleifschuh
Band blowing with compressed air
9byix0gqa
Band size 7800 x 150 mm
Suction connection 120 and 140 mm
Newly varnished table slats
After partially painted because was busy... more
Wide-belt sander
Manufacturer Bütfering
Type FBS 1100
Ma. No. 418
Built in 1969
Output approx. 15 kW
Grinding width 1100 mm
Blade length 1.900 mm
Weight approx. 2 t
With some sanding sheets
890iqfux8
Item location: 59457 Werl
The machine can be visited like.
A truck loading is available.
We reserve the right to a sale.
There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dime... more
only 550 h operating hours:
Working width of 1350mm
Lacquer sanding package
Belt length: 1900 mm
Mz3kh
Belt width: 1370 mm max
Combi unit type C
profiled steel contact roller
3-pole switchable drive motor, speeds: 4,5 / 9/18 m/s
no electric brake device
Band blow-off device, controlled work piece
Sanding shoe storage
Operating terminal, with the possibility to memorise the program
maximum workpiece thickness: 150 mm
Electr. controlled limb pressure bar 25 mm segment width
Roller t... more
Effective working width (with max. Wide sanding belts) 1150 mm
grinding belt length 2200 mm
Abrasive belt dimensions for the max. width 1180 mm
Side of the grinding belt infeed (standard) left
Workpiece thickness 0,5-150 mm
Variable working height from floor 750-900 mm
Sanding belt Diameter 200 mm
Sanding belt tensioning System
Electronic oscillation
Suction openings
safety devices
Eccentric mechanism for compensating the different grinding belt thicknesses
9cn9xqgi3
Rubberised roller, oil and ... more
Wide belt sander (1.350 mm)
SMA-REF-5932
Mrfep
Type: wide belt sanders
Manufacturer: TMG
Model: FBA 1350
Year: unknown
Working range: Sanding width: 1.350 mm
Features:
Bottom: 1 sanding head
Top: 2 feeders
Condition:
ready for action
under power
Location: Austria
Availability: on demand more
Sales order, from 1 man carpentry operation
very good condition:
Dypitj3oe
4, 0kW engine performance
Electr. Table height adjustment
Edition size: 2200x800mm lighting
including many belts
from location Austria
more
Long belt sander
Manufacturer Bütfering
Type unknown
Built in 1969
Ma. No. 113
Speed 228 RPM.
Power 4 kW
8hjznevpw
Table size about 2,450 mm x 800 mm
Space requirement approx.:
3,600 x 1600 x 1400 mm
With Exhaustor892, 50
Item location: 59457 Werl
The machine can be visited like to see power and tried out.
A truck loading is available.
We reserve the right to a sale.
There is the way learned to examine suburb for sale articles. Specific questions should be clarifi... more
Double-sided disc grinding machine by HoPa (made in Germany)
This double-sided Disc Grinder is specifically designed for the construction of the model. Heavy rigid machine for all machinable metal materials can be used.
Power 400V / 3, 6kW with automatic motor brake
Direction of rotation either left - right reversible, thus optimal use of abrasives
Speed 750 RPM
2 x 800 mm diameter
02yisryx2
Both tables are swivel 45 degrees down and 30 degrees upward
Angle reading Vernier, locking e... more
Bandschleiffer This can be very large metal handle parts! vertical metal belt grinding machine for large metal parts for metal parts up to: Height = 3500 mm length X = mm including Absaugturm etc.
B3fu9
more
Single-sided plate grinding machine SM40T by BMT (Swiss manufacturer) with built-in dust removal system
Engine power 380V / 1, 5kW
Direction of rotation either left - right reversible, thus optimal use of abrasives
Speed 1400 RPM
Disc diameter 400 mm
grated iron table can be flipped to 45 degrees downward and upward
Angle stop at three movable table edges
Angle stop rotating
Round grinding device
Table size 550 x 220 mm
Grinding wheel with new Velcro surface mounted, as well as thr... more
Type: KCSB 1100
used machine
working width: 1100 mm
combi unit
contact roller 80° shore
Ljvp7
Year of construction: 1985
location: Warehouse / 82281 Herrnzell more
Belt size: 350 x 2800 mm Belt speed: 4 - 28 m / s Working area: 350 x 800 mm Power :: 9.8 kW Power consumption: 10.2 Ampere Ex-protected machine with wet grinding device for grinding, deburring and polishing and
Plwgzi02
more
Very well maintained machine.
Working width: 900 mm
Yqm3wg
Working height: 4.0-150 mm.
Sanding belt width 950 mm.
2 grinding units with the 18.5 KW motors.
Electrical thickness adjustment.
Digital ads.
Continuous feed.
Brush for the conveyor belt
Attached Elektroschaltschrank.Sehr good condition
Brush tool interface.
Mink - zigzag - system, nylon
more
Single-sided plate grinding machine Frommia with turning plate
Engine power 380V / 2 .2kW rotation either left - right reversible, this optimal abrasive use
Speed 1420 RPM
Disc diameter 500 mm
grated table can be down to 45 degrees and 30 degrees swivel upwards
Angle stop in Tischnut moved
Table size 800 x 250 mm
Working height 880 mm
Turning plate, equipped with 2 wheels, this can be changed very quickly between two grain sizes (four screws, rotate plate and screw, finished)
Jue... more
Type: F
Used Machine
table size: 2600mm x 800mm
ElectricTable stroke
clockwise and anticlockwise rotation
Zawkxcjkj
motor power: 3 kW
Year of construction: 1990
location: Warehouse / 82281 Herrnzell more
Grinding width 1100 mm
8aril2bre
Grinding height 150 mm
Two rubber steel aggregates
Main engine 18,5 kW
Feed engine 0.45 kW
Two rolls at the entrance and exit more
Work table dimensions: 2.530 x 810 mm
Working table height: 550 mm
Work table transverse hub: 690 mm
Sanding shoe dimensions: 150 x 270 mm
Belt speed: 17 m/s
Engine power: 3 kW / 400 V / P 2
Table height: 0.37 kW
Drive roller: Ø 225 mm
Sanding belt size: 7,000 x 150 mm
Suction connector: 2 x Ø 160 mm
Dimensions: 3,750 x 1,250 x 1.730 mm
Weight: 520 kg
Bq77e3ww
more
Wide belt sander:
Yr3zdpmb
Built in 1995
Power requirements 87
Machine weight (kg) 4500
Space 3.85 x 1.88 x 2.2
Manual control mode
Manufacturer: Weber type: OFZ-E2/3N-1350
With 2 wet grinding stations, 2 wire brush stops, 1 Scotsh-Brite brush
Performance: 87 KW/400V/160A
Band-width 1350 mm, passage height 100 mm minimum length 150 mm, width 10 mm, thickness 0.8 mm suction of grinding motor 18 kW engine was overhauled Inc operating and wiring instructions
more
Type: T85
Used Machine
table size: 2700mm x 800mm
ElectricTable stroke
clockwise and anticlockwise rotation
7flsvesg9
motor power: 4 kW
Year of construction: 1988
location: Warehouse / 82281 Herrnzell more
Wide belt sander SAFO DCST-63
- machine in stock
- after technical review
- very good condition
- year of production 2010
TECHNICAL PARAMETERS :
Mtw02
- grinding width of 630 mm
- grinding height 100 mm
- kombi kombi
- pneumatic roll of the shaft
- pneumatic clamp of the shoe
- pneumatic oscillation
- electrically adjustable height
- two types of feedrate
- main engine 5.5 kW
- feed motor 0.3 kW
- height display
- shaft of hardness 85 shor
- diameter 160 mm
Machine dimensions:... more
Wide belt sander Heesemann KSM 1 1300 mm
Wide belt sander Heesemann
- Year of construction: 1989
- Type: KSM 1
- Grinding width: 1300 mm
- Power rating: 48 kW
- Weight: 4300 kg
- The height of grinding: max 140 mm
3sf07wslt
- Units: transverse, longitudinal (with cylinder calibration), brushed
- Sanding belt length 2620 mm
- Surface min.: 1850 mm x 2470 mm
- Vacuum table: yes more
from training workshops, very good condition:
Power: 2 .2kW
Left / right rotation
Table size: approx. 2400x770mm
Electric table hub
Belt width: 150 mm
7tm3gjigs
more
Wide belt sander SAC
Type: RT1 1100
Second-hand machine
Working width: 1100 mm
Combi unit
8qpixa2io
How to contact with roller 80 ° shore
Usage-driven air - sanding pad
Sanding belt dimensions: 2200 mm x 1130 mm
Sanding belt 2 speeds
Feed: 2 levels
Power consumption: approx. 13kW
Year of construction: 1995
Location: Camp / 82281 Herrnzell
more
Wide belt sander RWT Rojek BS950
- machine in stock
- after technical review
- very good condition
- year of production 2001
TECHNICAL PARAMETERS:
- Working width 950 mm
- minimum working height of 3 mm
- maximum working height 160 mm
- shaft diameter 180 mm
7lxacwuzr
- length of abrasive tape 1900 mm
- abrasive belt speed of 18 m / s
- Feed rate 4.5 / 9 m / min
- main engine 11 kW
- electric height adjustment
- diameter of 120 mm
- two types of shoe work
- blow to tape
- shaft 85 sh... more
Wide belt sander Houfek Bulldog SPB 1010 RC
- machine in stock
- after technical review
- very good condition
7lw7m3cfi
TECHNICAL PARAMETERS:
- rubber shaft
- kombi kombi
- the first pneumatic cylinder
- Working width 103 cm
- electrically adjustable height
Oscillation
11 and 10 kW motors
- two types of feedrate
- 2 x 150 mm connector diameter
- pneumatic centralization of the belt
- element thickness gauge
Total power 23.3 kW
Machine dimensions:
- length 220 cm
- width 150 cm
- heig... more
excellent condition table height adjustment: motorized table size: 2800x1250mm sanding pad: 300 and 450mm long sanding unit: switchable belt length: 7800mm width: 150mm Motor power: 5.5kW fan motor: 1.1kW speed: 1500 rev / min line speed: 22m / sec Pneumatic grinding unit, upper incorporated abrasive pad on eccentric, height adjustable rotating Bandausblasvorrichtung pneumatic belt tension turntable for workpieces in the machine table
Xr0lwemzh
more
Wide belt sander OTT 2 CONTRA
- machine in stock
Imrtcgbd
- a reputable German company OTT
TECHNICAL PARAMETERS :
- grinding width 1150 mm
- three aggregates
- rubber shaft speed 7/13/20 m / s
- 5/7/13 m / s shoe
- pneumatic oscillation
- electric height adjustment
2 x 11 kW motors
- cleaning brush at the exit
Machine dimensions:
- length 280 cm
- width 200 cm
- height of 250 cm
- weight ~ 3000 kg more
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance.
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course occur anyway during the purchase process differences of opinion. Machineseeker and Thorsten Muschler GmbH is not liable for violations of the active Maschinensucher or Machineseeker buyer or seller.
Try our Machineseeker app now! Machineseeker app for iPhone and Android.
+44 (0) 20 806 810 84
+49 (0) 201 857 86 10
+48 (0) 223 076 958
