Band sander machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph Cwu7mlti 4-Station moulding sander with (3) lineal belt profile sanding heads and (1) brush head, 5" wide feed track. -- Infeed: 5" feed chain with rubber inserts. -- 1st Station - 3" wide triangular profile sanding belt; Pneumatic belt tensioning; Vertical/Horizontal adjustment; 15° plus/minus rotation. -- 2nd Station - 7" wide by 108" long horizontal sanding belt; Pneumatic belt tensioning; Vertical/Horizontal adjustment, 5 HP motor. -- 3rd Stat... more
6
Homag Panel Sizing & Edgebanding Machine, KF 26/07/A3/25 Make : Homag Model : KF 26/07/A3/25 Serial# : 0-200-03-0005 Year of Mfg. : 2002 Condition : Used, very good conditions Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in in the US till now! Full Tech. Details and Documentation available upon request DESCRIPTION Fixed side on left, movable side on right. Double-Sided mac... more
6

Edge banding machine OTT Atlantic V 6-F

Hohenstein-Bernloch, GermanyGermany dealership location
6691 km
2000
used
6 mm workpiece width - max. 42 mm length 5300 mm Bhyacm7 more
6
Setting machine for CV band saw blades up to 130mm -hand and motor drive Bcm7weurph -Demonstration in our company and instruction -with warranty more
5
Condition: Unused Qsvrk8pqt Cutting height 160mm Cutting width 310mm Roll diameter 320mm Table size 380x380 mm Motor 220V. MARCELS MASCHINEN CH more
1

Crushing and sizing machine for Bandsäg ALBER ASE

Röthenbach an der Pegnitz, GermanyGermany
6759 km
2010
as good as new (ex-display)
ALBER crushing and sizing machine type ASE for band saw blades Dmjlj02 more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Etkvyqo HOMAG BAZ 20 FLAT TABLE MACHINE (W/EDGEBANDING): -- Specification:Working size "X" Axis is 220.5" (5,600 mm), "Y" axis is 62.9" (1,600 mm), "Z" axis stroke is 200 mm (7.8"), "Z" axis working cap. 120 mm (4.7"); minimum internal radius 30 mm; precisely applies ABS & PVC with max. edge thickness 40 mm & 65 mm without edging. -- Edgebanding Unit:Edgebanding is automatically applied to square or irregularly shaped parts as the CNC manufacturing head... more
4
MACHINE DATA Single-Sided Edge banding Machine, Make : Homag Model : KAL of Mfg. : 2004 Condition : Very good Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in the US till now! Full Tech. Details and Documentation available upon request DESCRIPTION left-handed, single-sided edge-banding machine. All stations are m... more
11
-To glue er thickness of 10 mm -Workpiece thickness of 42 mm Hmyi0bxdy -Roller blades -Hot melt glue tank -Saw capping -Bündigfräs unit -Rundungsfräs unit RADIUS scraper -Buffing unit See data sheet! more
8
PTG - swaging machine for band and gang saws -good condition Ptqr7e -Machine can be viewed and demonstrated in our company. more


band sande...
daily

New machines via email!

Stay updated!
5
Condition: Unused. Cutting height 370 mm Cutting widht 680 mm Ypyb3w Roll diameter 700 mm Table size 690x750 mm Motor 380V. MARCELS MASCHINEN CH more
1

Vertical Bandsaws STARTRITE 20 RWF 20" / 508mm Bandsaw and Brazing machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 45829 Table size 21" x 21" / 533mm x 533mm Input 415/3/50 1.1 kw Speeds 15 - 90 m/min Bcie8sbhox Throat 20" / 508mm Daylight 10" / 254mm Fitted with Bandsaw Brazer Length 4' 4" / 1320mm Width 2' / 609mm Height 6' 2" / 1879mm Nett weight approx. 300 kgs more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Etbes3n HOMAG BAZ 20 FLAT TABLE MACHINE (W/EDGEBANDING): -- Specification:Working size "X" Axis is 220.5" (5,600 mm), "Y" axis is 55"" (1,400 mm), "Z" axis stroke is 200 mm (7.8"), "Z" axis working cap. 120 mm (4.7"); minimum internal radius 30 mm; precisely applies ABS & PVC with max. edge thickness 40 mm & 65 mm without edging. -- Edgebanding Unit:Edgebanding is automatically applied to square or irregularly shaped parts as the CNC manufacturing head r... more
4
Useful width: 1300 mm Panel thickness: 3 - 80 mm 1 x crossbelt, belt sizes 6200 x 150 mm, belt speed 12 and 24 m/s, motor 13/17 kW 1 x wide belt with segmented pad as well as roller with excentric adjustment for small calibration work, belt sizes 2620 x 1350 mm, belt speeds 3,5 / 10 and 20 m/s, motor 4,5 /12 /17 kW, 2 directional 1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 10 and 20 m/s, motor 13/17 kW 1 x brush, diameter 150 mm, fibres, motor 1,5 kW 1 x brush, diame... more
8
Banding unit cartridge; Printer dock; Flush milling top down with each 1, 1kw motor, Massivanleimer up to 20 mm. Location: 54634 Bitburg comes to camp Bcvbfl20z3 more
3

Edge banding machine OTT Tornado Top

Hohenstein-Bernloch, GermanyGermany dealership location
6691 km
2013
used
12 mm E7xlsrzoe weight 3100 kg length 6180 mm more
5
Condition: Unused. Cutting height 160 mm Cutting width 310 mm Roll diameter 320 mm Qsvqx3eir Table size 380x380 mm Motor 380V. MARCELS MASCHINEN CH more
10
Sharpening machine for band saw blades. Bcv3lac2nc Leaf width up to 120 mm. pitch up to 45 mm. Linear feed. Extraction. Idler brackets adjustable in height. Magnet Guide. Very little work. more
6
Technical data: Arbeitsbr. : min: approx. 60 mm Edge thickness max: approx. 9 mm Strip thickness max: approx. 0.4 mm bars dimensions max.f.Kappen: ca. 9 x 45 mm Strip height min: / max: ca. 14 / 55 mm workpiece recusal max: approx. 30 mm Fq0oulb Workpiece thickness min: / max: 10/50 mm part length min: approx. 150 mm Mains voltage: 3 x 380 v run speed: ca. 10 m / min Frequency: 50 Hz. Facilities: -heated infeed fence -Gluing unit -Trimming unit -Flush trimming unit -Fine trimm... more
5
Side grinding machine EMS-L feed from left - for band saw blades -own drive with geared motor Control panel with on / off for feed, on / off for grinding wheels and automatic -included band saw carrier with magnetic guide roller -70 to 360 mm band saw width -tooth pitch 20 to 100mm -rad & tang angle 0-7° -2 pot grinding wheels 80 x 40 x 20 mm -connected load: 1,2 kW -Weight : 390 kg ----- with Warranty Machine can be demonstrated on site under power -including gri... more
6

edge banding machine HEBROCK AKV 2001 DK

Rietberg, GermanyGermany dealership location
6468 km
1993
used
"machine edge banding machine manufacturer Hebrock type AKV 2001 DK part Id-no. 2234804 year of construction 1993 ... more
9
Type: Euromatic r & d Second-hand machine Workpiece height: 10-60 mm Bcv3cvb73g Workpiece length of min 150 mm Edge thickness 0.2-15 mm Feed 12-16m / min Aggregates: -Fügefräsen -Glue specifying glue roll -Knife -Flush caps -Flush milling -Profile milling -Form milling -Profile scraper -Flat scraper -Buffing wheel -Machine length: 8500 mm -Weight: 3500kg Frequency converters of feed broken more
3
Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992 Q8zibtq7r more
8
Very well maintained cutting band saw with automatic media cutting device hydraulic. Roll diameter 1,100 mm. feed work type C. For cutting means cutting and rind cut. Separation of squared timbers, planks and rinds. Continuous feed up to 100 m / min. cutting height 320 mm Bcvzye29mm Electric blade tension. Motor 18.5 KW. Sheet width 120 mm. more
5

Wide Band Grinding Machine Ernst EM5NL1400

Köln, GermanyGermany dealership location
6416 km
2003
used
diameter: mm workpiece length: mm work piece width:1400 mm total power requirement:37 kW weight of the machine ca.:4,5 t dimensions of the machine ca.:2,93 x 3,24 x 1,78 m 3fyx0aj9f The Ernst Deburring Machine Type Ernst EM5NL1400 is designed for grinding and deburring of metal sheets in the wet grinding process. more
14

Edge banding machine HEBROCK EURO 2000 inkl. Zubehör

Im Letten 2, 73433 Aalen, DeutschlandGermany
6718 km
1999
good (used)
Edge banding machine HEBROCK EURO 2000 Used, year of constr. 1999 very good condition, fully functional for plastic borders, veneers, and massive gluing manner: border hot melt EVA- or PA-basis border thickness: roll material 0,5 – 3 mm , massive until 8mm working piece width: min 90 mm working piece thickness: min 10mm, max. 45 mm working piece length min 260 mm border material height: max. 50 mm border material length: min 330 mm feeding approx.. 11 m / min temperatu... more
6

edge banding machine HEBROCK AKV 2002 DK

Rietberg, GermanyGermany dealership location
6468 km
1997
used
"machine edge banding machine manufacturer Hebrock Cfkslv7u type AKV 2002 DK part Id-no. 2238101 year of construction 1997 ... more
6
Single sided egde banding machine Brand: IMA Type: Advantage 320 Year: 2012 Anti-stick solvent application Pre-milling unit 2 motors á 4 kW Empty space for pre-heating of the workpiece edge Gluing unit with glue application 0,8 l (hotmelt or PU-glue) Main pressure roller and 5 post-pressure rollers End trimming unit pneumatical swivable to 0° or 8° with 2 motors Contour trimming unit SKF-L with motor quick change device For milling of strip overhangs on frontal and rear workpiece profiles to... more
6
Top 2000 Built in 2006 Glue tank cleaned, overhauled and installed 2 new feed belts Glue up to 2 mm Combined milling unit RADIUS/chamfer/flush front frame excerpt lateral ones. fixed table extensions Dust nozzle 100 mm The machine has been cleaned, adjusted and test driven. 9nki7ea7r ready to use. more
6
Useful width: 1300 mm Panel thickness: 3 - 80 mm 1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 0,5 - 20 m/s, motor 22 kW Bbqtk0hxca 1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 0,5 - 20 m/s, motor 22 kW 1 x brush, diameter 150 mm, fibres, motor 1,5 kW 1 x EA dust cleaning machine, roller transport, high speed air cleaning with ionisation removing electrostatic dust Operational side at the right feed speed 8 - 40 m/min Fixed working height 880... more
1

EDGE BANDER machine BIMATIC B250 IR-SPI

MARIANO COMENSE, ItalyItaly
6817 km
ready for operation (used)
AUTOMATIC EDGE BANDING MACHINE Type BIMATIC B250 IR-SPI composition : - glue pot Bcvu9sb83m - end-trimming unit - edge-trimming unit - bevel-trimming unit volt. 380/50 more
8
Side grinding machine EMS-L feed from left - for band saw blades -own drive with geared motor Control panel with on / off for feed, on / off for grinding wheels and automatic -included band saw carrier with magnetic guide roller -70 to 360 mm band saw width -tooth pitch 20 to 100mm -rad & tang angle 0-7° -2 pot grinding wheels 80 x 40 x 20 mm -connected load: 1 kW -Weight : 390 kg Bcva8qqznf ----- with Warranty Machine can be demonstrated on site under power -in... more
6

edge banding machine OTT EUROMATIC-FÜ

Rietberg, GermanyGermany dealership location
6468 km
1997
good (used)
"machine edge banding machine manufacturer Ott type EUROMATIC-FÜ part Id-no. 2246860 year of construction 1997 ... more
6
Single sided edge banding machine Make: Homag Type: KL 79/A20/S2-20MM Year: 2000 Technical data: Coil or as strip, up to 20 mm edge thickness, in lenghtwise and crosswise feed. Control NC21 - Feed stepless controllable 18 - 24 m/min - Working height 950 mm - Working width min.: - 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length) - Workpiece overhang 30 mm - Workpiece thickness 12 - 60 mm - Edge material strip max. 0,4 - 20 mm - Edge cr... more
6
Sehr guter Zustand, sehr saubere Maschine Very good condition, very clean machine. - Producer Venjakob - Type HGS-Duo - Year of construction 1994 - Working width 1.300 mm - Working height ~ 900 mm + - 20 mm Hdqfycd - Operating side, left - Single gun drive system - Exhaust air 7.000 m³/h - Steel belt transport system 10 Bänder, Breite 15 mm, ES, Teilung 140 mm - Feed speed adjustable 2 - 7,5 m/min - Gun control EPS-F2 - Number of installed spraying guns 4 Stk. - Vol... more
6
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: max 60 mm Feedspeed 11-14 m/min Workpiece transport by chain, automatic lubrication Equipment: Programmable fence Application of liquid avoiding the glue sticking on the panel surface Pre-milling with 2 shapers, each 2,2 kW Hot melt unit, Quickmelt type Pressure zone, programmable End trims, 2 motors 0,35 kW Top/bottom rough trimming, 2 x 0,55 kW, lateral tracing r... more
1
Nfte7 Vitap Quartz - Year of construction: 2008 more
10
Setting machine for wood band saw blades 5 to 45mm C2we20vv Technical specifications ----- band saw blades width from 5 to 45mm thickness up to 1mm tooth pitch 3 to 24mm working speed 200 teeth / min connected load 0,18 kWWeight with stand 70 kg ----- With warranty Machine can be demonstrated - live in our company more
6

edge banding machine HOLZHER 1487 V

Rietberg, GermanyGermany dealership location
6468 km
2002
used
"machine edge banding machine manufacturer Holzher type 1487 V part Id-no. 2179277 year of construction 2002 ... more
6
Single sided Edgebanding machine Make: IMA Type: Novimat /K/G=80/737/R=3 Year: 1999 Technical data: Infeeding fence with horizontal axis and pneumatic infeed control Stopp Top pressure belt, motorical height adjustment, wide V-belt Premilling unit with 2 motors, each 3,0 KW, 200 Hz, 12000 U/min. Horizontal adjustable by motor IR heating zone 300 mm Gluing unit with horizontal axis control Gluing application for 50 mm heigth 4-fold roller pressure zone 2 coil edges magazine With IMA Quickme... more
13

Edge banding machine HEBROCK EURO 2000 - sehr guter Zustand! -

Im Letten 2, 73433 Aalen, DeutschlandGermany
6718 km
2000
excellent (used)
Edge banding machine HEBROCK EURO 2000 Used, year of constr. 2000 very good condition, fully functional for plastic borders, veneers, and massive Jf9g2nhn gluing manner: border hot melt EVA- or PA-basis border thickness: roll material 0,5 – 3 mm , massive until 8mm working piece width: min 90 mm working piece thickness: min 10mm, max. 45 mm working piece length min 260 mm border material height: max. 50 mm border material length: min 330 mm feeding approx.. 11 m / min ... more
6
Double sided squaring and edge banding machine positioning left and right towards center Edges up to 3 mm thickness First pass machine Panel feed by rolling chain Top pressure by driven V-belts Width adjustment over linear slideways left and right Feed speed 10 to 40 m/min Muft7o Panel outstand 40 mm. Workpiece thickness 3 to 60 mm. Working height: 950 mm. Working width, double sided min. 230, max. 1000 mm. Coil edges 0,3 to 3 mm., coil-diameter 830 mm. Equipment left and right: 3 Infeed roll... more
3
- Saw unit Ju0bqu - Milling unit - Scraping unit - Brushing unit more
3

Band saw machine BEHRINGER HBP 650 A

Moos, GermanyGermany dealership location
6696 km
1981
good (used)
In the sales order - indestructible hydraulic high-speed band sawing machine Double column - heavy duty Brand: BEHRINGER Model: HBP 650 A Year of construction: 1981 Hlmket3qi Cutting capacity round / square 650 mm Band saw blade dimensions 8800 x 50 x 1.6 mm Cutting speed infinitely variable 18 - 90 m / min still in use more
6

edge banding machine IMA HKA

More Ima Hka
Rietberg, GermanyGermany dealership location
6468 km
2001
used
"machine edge banding machine manufacturer IMA type HKA part Id-no. 2238979 year of construction 2001 ... more
6
Single sided edge banding machine Brand: Homag Type: KR77 A20 S2 Year: 1998 Right hand machine - Feed stepless adjustable 18 - 24 m/min. - Working height 950 mm - Working width min.: 55 mm at workpiece thickness 22 mm 100 mm at workpiece thickness 60 mm (depending on the workpiece length) - Workpiece overhang 30 mm - Workpiece thickness 12 - 60 mm - Edge material strip max. 0,4 - 20 mm - Edge cross sectional areat strip max. 900 mm2 - Edge material coil 0,3 - 3 mm - Edge cross ectional area m... more
6
Cutting areas: -Round, diameter: 280mm -square Wxh: 280 x 280mm -smallest diameter to saegender: 10mm -minimum cut length: 6mm -shortest remaining length in the single cut: 15 mm -shortest rest of piece in the automatic operation: 80 mm -Feed length: 590 mm 97rhlsts2 -Multiple feed: 9999 mm Max material weight: 400 kg / m Cutting speed: adjustable 17 - 90 m/min Infinitely adjustable cutting feed Material tension: hydraulic, infinitely adjustable clamping pressure: 20-60 bar B... more
6
Bcszrsj2bs 1st pass machine Fixed side at the left Working width: 1500 mm. Workpiece feed by chains Sound enclosures Equipment: Squaring part: 1+1 Shaper 4,5 kW 1+1 Jump shaper 4,5 kW 1+1 Jump shaper 4,5 kW Edging part: 1+1 Edge-magazine HL 10 for twin coil with 600 mm diameter, guilotine for edges 0,4 till 1,5 mm thickness 1+1 glueing part type QE34 1+1 4-fold pressure zone for softforming or straight edges 1+1 Free space for end trims 1+1 rough trimming unit, motors 0,6 kW 1+1 fine trimming... more
15
Very compact calibration and fine grinding machine, wide belt sander Weber KLE 2000 A video of the current machine can be sent on request. Suitable ideal sanding machine for interior design companies, also for intermediate lacquer sanding Cross belt 9,2 kW with Elektronikschleifschuh 32 mm and Ellen Ribbon lamb Laengsschleifaggregat as a combined unit 11 kW, frequency controlled by 2-20 m/s, with calibration function (grooved steel contact roller) and pressure bar 32 mm Belt feed contin... more
2
Bcm833nm2j Cutting unit: 392, Self-control, UV resistant belts, Premelter: HHS Promelt, Gluing unit: HHS XP-08, Gluing channels: 8x, Mechanical speed max: 160 m/min, Working width: 820 mm, Working length: 3.300 mm, Infeed height: 650 - 950 mm more


band sande...
daily

New machines via email!

Stay updated!

to

to

Edit search
BAND SANDER MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close