Used Bellow for sale (185)

Condition: used, mileage: 504,703 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania R 500 A4x2NA CR20 H VIN: 9258442 Chassis / Attachments: * Wheelbase: 3,750 mm * Leaf / air suspension (2 bellows) * Tyres: Front 385/65 R22.5, Rear 315/80 R22.5 * Remaining tread: Front: approx. 95% // Rear: approx. 40% * 1 x aluminium tank 700 L * 1 x AdBlue tank * 1 x Winkler hydraulic tank 170 L Cab: * CR 20 H * 1 bed * Refrigerator * Automatic climate control * Auxiliary heater * Stationary air conditioning * Scania Infotainment Premium * Aux, USB, BT * Kesla lamp bar with 6 spotlights * Skylights / LED * DAB * Scania AEB = Emergency Brake Assist * Scania ACC = Adaptive Cruise Control * LDW = Lane Departure Warning * AICC = Adaptive Cruise Control (speed-dependent) Engine / Transmission: * 12,742 cc // 500 HP / 368 kW // EURO 6c * Scania retarder * Opticruise / automatic with 2 pedals * Differential lock * PTO Weights: * Gross weight: 18,000 kg * Unladen weight: 8,142 kg * Payload: 9,858 kg Bsdpoyk N Rlsfx Aa Ejld Other: * German vehicle * HU SP / new safety inspection possible --- New technical inspections / safety checks or weight reductions/increases available upon request. We are happy to assist you in obtaining export/transfer license plates. Vehicle transfers within Germany are also possible. Contact us! --- We speak the following languages: German, English, and Russian! --- No liability for printing or typographical errors. Subject to changes, prior sale, and errors! --- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the distribution of new and used commercial vehicles. On 11,000 m², we offer a wide variety of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is our top priority, we offer an excellent all-around service package, providing a competent contact person to assist you during the purchase or sale of your vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist with loading of your purchased vehicles. Arrangement of special transports We are happy to assist in arranging special transports. Temporary/Export license plates We are happy to assist in obtaining export or temporary license plates. Customs formalities We are happy to assist with customs procedures.

Condition: used, Austeras Ecoslim trailer, 2 axles, year 2021, ADR for all classes, serviced, with new air bellows, shock absorbers, and brakes. Bledoyk Dcpepfx Aa Eod

Condition: new, empty load weight: 501 kg, maximum load weight: 1,299 kg, overall weight: 1,800 kg, loading space length: 3,500 mm, loading space width: 1,800 mm, loading space height: 100 mm, loading space volume: 0.6 m³, color: silver, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - Availability: IMMEDIATELY! - TÜV: 2 years from first registration - Floor: Multiplex floor with anti-slip surface - Gross vehicle weight: 1,800 kg - Unladen weight: 501 kg - Payload: 1,299 kg - Loading area dimensions: 350 x 180 x 10 cm (L x W) - Drive-on angle approx. 4 ?. - Tires: 195/50 RC 13C - Brake: yes - Support wheel: yes - Incl. vehicle documents (letter) - 100 km/h approval: Included! AA118/3518, top model, car transporter with one axle line, equipped with fully electronic air suspension system. For the regular user looking for the best possible quality. Mounting of the suspension system completely under the vehicle. Equipped with an 18 bar quality compressor with air dryer, electronic control and height control. 12V 70Ah vehicle battery. Particularly simple button operation. Only works with a fully connected 13-pin plug! Depending on choice with 18mm multiplex floor or 19mm aluminum floor profiles. Optionally with an additional remote control and/or with an additional air tank (5 liters). Standard equipment: - thermally galvanized chassis - very stable welded steel frame - rear sloping rear - very stable V-drawbar - plastic mudguards - wheel suspension, independent air suspension - incl. 100km/h approval - loading area can be lowered to the road surface or the ground by means of air suspension, drive-on angle approx. 4 ?. - Electronic air suspension - 2 air bellows - 2 adjustable shock absorbers - emergency valves, for external filling of the air suspension - 195/50 RC 13C tires - polyamide air hoses - stainless steel couplings - custom-made wiring harness - function only with fully occupied 13-pin socket - mounting suspension system completely under the loading area - 2 sensors for height control - electronic control in the drawbar - compressor 12V 18-bar - Made in Germany - integrated 12V, vehicle battery, 70Ah - plug for external battery charger - ASCU control system - 15mm multiplex floor panel, made of birch wood, with anti-slip coating and full-surface - lashing points, left, right and front - folding license plate holder with LED lighting, - support wheel, automatic - large-dimensioned safety lighting - integrated rear fog light - reversing light - 13-pin plug - registration papers: COC papers Accessories / optional extras available: - all-aluminum floor - tarpaulin AA3518, 330x180x180/193cm (LxWxH) desired color 4x zigzag lock from - box body AA3518, 25mm isol. panels met alum. Roll-up door - Fixed front wall / high front grille - 2. Compressor with additional air tank - Wireless remote control for air suspension system - External battery charger - Battery charger integrated in the vehicle with 230V connection - Spare wheel 13 inch - Aluminum alloy rims - Spring rod Autostop / wheel stopper to prevent driving too far - Mobile emergency compressor - Storage box for accessories - Winch hand 820 kg braked - Winch hand 1200 kg braked - Winch hand 1450 kg braked - Weather protection cover for winch New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist for over 30 years. Bsdpfxou Hrxws Aa Eeld

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 65 rpm, quill stroke: 100 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,200 mm, table width: 390 mm, table length: 840 mm, workpiece weight (max.): 200 kg, distance table to spindle center: 470 mm, Equipment: documentation/manual, Table surface (angle table): 390 x 840 mm Max. workpiece weight: 200 kg Travel X: 420 mm Travel Y: 220 mm Travel Z: 380 mm Quill travel Z1: 100mm Speed range: 65 - 2600 rpm Gear levels: 12 Bledpfx Aasu Nytzs Eed Drive power: 2.2 kW Tool cone: SK 40 (DIN 2080) Weight approx.: 1200 kg Including extensive standard accessories, including: Work area paneling with doors at the front 3-axis digital display Pneumatic tool clamp for vertical spindle with SK-40 (DIN 2080) Double-monitored spindle protection 3 conventional handwheels Complete electric. Equipment for three-phase current 400 V, 50 Hz Ball screws for X, Y and Z axes Vertical milling head Fixed angle table 9840 x 390 mm clamping surface Swivel device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guideways Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pcs.) of bearing elements

Condition: used, maximum load weight: 23,065 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 08/2008, next inspection (TÜV): 02/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, According to our "General and Stated Terms and Conditions," we can offer you, without any guarantee or warranty and subject to prior sale, errors, and misprints, the following vehicle on a non-binding basis until a contract is concluded: Schmitz City Deep-Freezer Trailer ( Vehicle 230 ) First registration: 30.08.2008 Type: SKO 20/ LZG-13.4 FP 80/45 Perm. GVW: 32,000 kg Unladen weight: 8,935 kg Payload: 23,065 kg Overall length: 13,550 mm Overall width: 2,600 mm Overall height: 4,000 mm Internal length: 13,400 mm Internal width: 2,500 mm Internal height: 2,400 mm Body type: Ferroplast 2 x lashing rails on each wall, one above the other Tail lift: BÄR, 3,000 kg, upright at the rear Refrigeration unit: Carrier Maxima 1300 5,279 operating hours Diesel Temperature recorder 2 x 12-ton twin-speed landing gears Spare wheel holder Air suspension bellows replaced in 10/2025 Air suspension with raise & lower function Various impact damages 2 x LED work lights at rear sides + 2 x LED reversing lights Tyres: 425/65R22.5 front approx. 40%, rear approx. 60/40 TÜV until 02/, SP. Steerable axle Plastic toolbox Water tank Bedpex Iyizefx Aa Esld Price: €5,250.00 (net) All information provided without any guarantee or warranty. Our "General and Stated Terms and Conditions" apply. Place of jurisdiction for claims up to €50,000.00 is the District Court of Ludwigslust; for higher values, the Regional Court of Schwerin. Subject to errors, misprints, and prior sale.

Condition: used, mileage: 555,500 km, power: 294 kW (399.73 HP), first registration: 05/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, German vehicle One owner Bsdor Iv Dbspfx Aa Ejld Net export with deposit Special equipment: 2 auxiliary power take-offs NAS/10 without flange on top and with flange on bottom, car phone antenna, trailer data display, electrically adjustable and heated exterior mirrors and wide-angle mirrors, wide-angle mirror with electric maneuvering aid, 225 Ah battery, electrically adjustable and heated curb-side mirror (right), digital axle load indicator for air-suspended axles, pressure sensor for air suspension bellows, ETA automatic circuit breaker, cab with air suspension, comfort driver’s seat: air-suspended, heated, ventilated, with lumbar support, flame preheater system, 12-speed transmission - type: ZF 12 AS, Tipmatic, fuel tank: combination aluminium tank – 580 l diesel + 60 l urea solution (AdBlue), wind deflector to reduce dust turbulence, 2-cylinder air compressor, 720 cc, heated air dryer, Eberspächer D4S auxiliary air heater, emergency battery disconnect switch, retarder, stationary air-conditioning unit, 12V and 24V cab power outlets, fleet management control module, extended door for cab, additional high-beam/fog lights with cornering light function Further features: Axle configuration: 4x2, ambient lighting, start-assist/front mirror, 24V / 7-pin trailer socket, ABS trailer socket, traction control (ASR), audio system: MAN Media Truck Advanced 12V with navigation system pre-installation, MAN-Tronic on-board computer, rear axle differential lock, MAN Brakematic electronic braking system, EURO 6 engine, cab with Nordic insulation, cab type: XLX, suspension: leaf / air, electric window lifts, remote central locking, tinted windscreen, 28 V 80 A alternator, manual sunroof, body/superstructure: tractor unit, EVB brake lever, automatic climate control, heated fuel filter, multifunction steering wheel, raised air intake, engine: 12.4 l – 294 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side-mounted spare wheel carrier, fifth wheel: Jost JSK 37 C, disc brakes rear axle, disc brakes front axle, tinted rear side windows, comfort quality seat covers/upholstery, sunblind for windscreen, sunblind for side window driver's door, spray-suppression, rear axle stabilizer, front axle stabilizer, externally accessible storage box, tinted door windows, viscous fan, central locking, permissible gross weight 18.00 t

Condition: used, mileage: 520,884 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania R 500 A4x2NA CR20 H VIN: 9258309 Chassis / Attachments: * Wheelbase: 3,750 mm * Leaf / Air suspension (2-bellows) * Tyres: Front 385/65 R22.5, Rear 315/80 R22.5 * Remaining tread: Front approx. 80% / Rear approx. 90% * 1 x aluminium fuel tank, 700 L * 1 x AdBlue tank * 1 x Winkler hydraulic tank, 170 L Cab: * CR 20 H * 1 x bunk bed * Refrigerator * Automatic climate control * Auxiliary heater * Standalone air conditioning * Scania Infotainment Premium * Aux, USB, Bluetooth * Kesla light bar with 6 spotlights * Skylights / LED * DAB radio * Scania AEB = Emergency braking assistant * Scania ACC = Adaptive cruise control * LDW = Lane departure warning * AICC = Speed-dependent adaptive distance control Engine / Transmission: * 12,742 cc / 500 HP / 368 kW / EURO 6c * Scania retarder * Opticruise / automatic with 2-pedal operation * Differential lock * PTO Weights: * Gross vehicle weight: 18,000 kg Bedpfjykfpkjx Aa Esld * Unladen weight: 8,142 kg * Payload: 9,858 kg Miscellaneous: * German vehicle * TÜV/SP / new SP possible ---- New main inspections / safety checks or modifications to GVW (gross vehicle weight) are available on request. We are also happy to help you obtain export/temporary registration plates, and delivery of your purchased vehicles within Germany is possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typing or printing errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the distribution of new and used commercial vehicles. On an area of 11,000 m², we offer a wide variety of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is our top priority, so we offer our customers an outstanding all-round service package and provide them with a dedicated contact person who will support them throughout the purchase or sale process. See for yourself! Our service for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Day plates / export plates We are happy to assist you in obtaining export/temporary registration plates. Handling of customs formalities We are happy to assist you with customs clearance.

Condition: used, maximum load weight: 29,280 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 13,260 mm, loading space width: 2,480 mm, loading space height: 2,945 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, SCHWARZMÜLLER 3-axle SANH Mega Curtainsider with one-piece tail lift for forklift transport First registration 10/2024, in as-new condition Mileage only 7,937 km (trade fair/exhibition trailer) Permissible gross weight (technical): 39,000 kg Unladen weight: 9,720 kg Internal length: 13,600 mm Internal width: 2,480 mm Internal height: front 2,895 mm, rear 2,945 mm, height adjustable Coupling height: 960 to 1,050 mm Chassis with frame reinforcements for increased point load: 20 tons over 5 m Perforated outer frame 22 pairs of recessed lashing rings, 4 t 10 pairs of recessed lashing rings, 5 t Anti-slip screen-printed floor, 27 mm + additional 12 mm cross-laid birch plywood, forklift axle load capacity 7,200 kg, rear bolted steel durbar plate wear sheet 5/7 mm Bodpfxjxcrq Do Aa Esld Reinforced aluminium front wall, 2,550 mm high, interior front wall protection in 9 mm screen-printed board Tarpaulin bar at front corner posts with ratchet tensioner, curtain openable and tensionable from the front Rear portal extendable, 490 mm per side 3 pairs of reinforced centre posts, 5 rows of slat pockets 4 rows of aluminium slats, 100 mm EDSCHA sliding roof with steel scissors, can be moved both forwards and backwards Hydraulic lift roof, hand operated on both sides, roof lift height 400 mm Sliding curtain, Code XL INFLATABLE AIR HOSE SYSTEM in trailer roof DHOLLANDIA tail lift, load capacity 9,000 kg Full-height steel platform, 2,950 mm Platform drivable up to 14,000 kg! Remote control operation Hydraulic rear support SAF axles, disc brakes IntradiscPlus Integral Axle spacing: 1,310 + 1,410 mm 1st axle: lift axle 3rd axle: trailing steering axle Tyres: 6 x 435/50 R 19.5 Goodyear WABCO trailer EBS with RSS anti-skid system Spring-actuated parking brake on 2 axles Air suspension with lift and lower function, extra-long air bellows with total lift of 250 mm Axle load indicator via CAN bus Tire pressure monitoring Full LED lighting 2 x stainless steel toolboxes on left, 1,000 x 500 x 500 mm RENTING is the new BUYING – immediately available with us as a full-service rental!

Condition: good (used), mileage: 888,270 km, power: 335 kW (455.47 HP), first registration: 07/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, fog lights, fridge, parking heater, power mirror, soot filter, - Bluetooth - Power brake booster - EPS (Electronic Power Steering) - Low noise - Tipping hydraulics - Particulate filter - Radio/CD player - Rain sensor - Sunroof - Side door - Auxiliary heater - Toolbox Front axle: Steered; Suspension: Leaf springs Rear axle: Suspension: Air suspension Unladen weight: 7,538 kg Payload: 10,462 kg Gross vehicle weight: 18,000 kg APK (Technical inspection): Valid until 08/2026 Technical condition: Good Visual condition: Good Blsdpsykb Rdefx Aa Ejd Vehicle number: 148 Mercedes Benz Actros 1846 StreamSpace / Tipping hydraulics / Eu6 VIN: WDB96340310270985 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater Distance assist system Lane keeping assist Emission standard EURO 6 Tipping hydraulics Special equipment: Driver airbag, CB radio, 2 air horns on cab roof, Cab width: 2.50 m, Suspension: front axle 7.5 t, 2-leaf, Tinted windscreen, Upper rear wall storage, 12.7 cm info display with additional indicators, Integral rear, Folding table in door panel, Automatic climate control, Cool box/refrigerator, Air intake behind cab, Mounting plate / 40 mm fifth wheel plate, Reinforced engine brake, PTO MB 131-2c, Frame lowering without bellows residual pressure control, Fleet management system interface, Drawers under door panel, Circuit breaker, Cab seats: Comfort driver's air suspension seat, Exterior sun visor, Steel rims 11.75x22.5 (front axle), 12V socket in passenger footwell, 24V / 25 A socket in passenger footwell, Pre-equipment / switch for lift axle on semi-trailer/trailer, Additional heat insulation, Transmission oil cooler Further equipment: Emission standard EURO 6, Axle configuration: 4x2, Front axle load 7.5 t, Actros 4, Trailer socket 24V / 15-pin, Work lights, Audio system: Radio with USB port, Exhaust to right outside, Electrically adjustable and heated exterior mirrors, Rear axle differential lock, Steel air tank, Medium compressed air unit, Assistance system: Attention Assist (fatigue detection sensor), Assistance system: Brake Assist (Active Brake Assist), Assistance system: Lane Keeping Assist, Cab: L StreamSpace, Cab: steel-sprung, Comfort, Suspension: Leaf / Air, Front spring mount aluminum, Electric windows, Alternator 100 A, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle ring gear 440, Body/chassis: Tractor unit, Lower comfort bed, Central locking system, Communication interface, 3-part mudguards, Radiator grille, Regulated steering pump, 2-stage air compressor, Engine 10.7 L - 335 kW R6 diesel (OM 470), Engine compartment encapsulation, Ramp mirror, Residual heat utilization, Disc brakes front and rear axles, Seat cover/upholstery: Fabric, Cab seats: Passenger functional seat, Cab seats: Folding driver's seatback, Voltage converter 24V/12V 10 A, Front spray protection, Front axle stabilizer, Left external storage compartment, Cab socket 24V, Tachograph / EC control device, Door extension for cab, Aerodynamically designed underbody fairing, Front underrun protection, Toll system pre-equipment, Drop center front axle, Regulated water pump, Perm. total weight 18.00 t, Additional heater (water) All details without guarantee! Al Shogran GmbH An der Glashütte 15 ...

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse Blsdjyi Amwspfx Aa Ejd 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Bedjyiw T Espfx Aa Eold Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Bsdpjxf Sn Iofx Aa Eold Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension Disc brakes 430 mm “off-road version” SAF-Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally mounted to chassis longitudinal member 3rd axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, lift-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70%, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" - bolted into an 8 mm thick plate Landing gear Mechanical landing legs, 2 speeds, 2x20t support load, with swing foot for air suspension Brake system According to ECE regulations, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, aluminium air tank system Bsdpfx Asyiw T Sja Ejld Electrical system According to StVZO guidelines with 2 five-chamber Aspöck type lights, 24V system with 2x7 and 1x15 pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly laid in plastic pipes Tipping body / Dump body “smooth construction” Fully welded inside Aluminium dump body, side walls with 30 mm thick plank profiles (2-3 mm) welded 600 mm wide, floor 6 mm thick, high wear-resistant alloy (5383H34/HB 110) with 45-degree bevel to side wall, front wall 4 mm reinforced, inclined design, rear wall designed as a universal door, straight design with 2 wing doors in 2/3–1/3 configuration and a grain chute, ALU round profile welded laterally and below to seal door gap on rear doors, rear doors partly clad with smooth aluminium. Universal door operated automatic-pneumatic, lockable with separate lever, aluminium rear brace pivotable, two hold-downs with rubber buffer on the dump body fixed to the frame at the front wall. Hydraulic system Tipping cylinder with "rotule" suspension (light) Hydraulic cylinder mounted on front wall with a working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and loose 1" half, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap over the full vehicle width attached to underrun guard, no spare wheel holder, aluminium, foldable side underrun protection right side, large toolbox type 860, approx. 3 m aluminium ladder, 3 central aluminium swing bows raised approx. 150 mm, additionally a centrally mounted bow holder for positioning up to 2 bows to widen the loading width, roll tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality with roll tarp system, continuous rubber cord at the rear closure of the tarp with two tension hooks to be fixed on the rear swing bow, catwalk on the frame in chassis colour with access left and right, tarpaulin closure to the side with quick-release fastener, rear tarp closure with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium, 2 "Clear-Pass" spray flaps on mudguard according to EU standard, aluminium grain hopper fixed to the side of the frame with plan bag, holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Offer and images subject to change.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes Blsdeyitxqspfx Aa Esd X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat. Bodpjup Aiksfx Aa Eold

Condition: new, We offer all types of spare parts for your conventional or CNC Karstens/GP cylindrical grinding machine, including components for your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed control systems—new and used—as well as reversing blocks for the Z axis on an exchange basis. Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Blsdsraibvepfx Aa Eod

Condition: used, mileage: 143,560 km, power: 335 kW (455.47 HP), first registration: 03/2021, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, total width: 2,500 mm, total height: 3,600 mm, loading space length: 6,100 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Suspension: leaf-air Wheelbase: 4,800 mm Axles: lift-steer axle DUOMATIC Navigation system Rear-view camera Lane assist Including Palfinger rear crane preparation BK009-01A Special equipment: 2-line trailer brake, connections on the left 220 Ah battery Standard and DuoMatic brake connections Interactive multimedia cockpit 2 air horns on cab roof Electrical pre-installation in cab 24V / 100 A Cab: movable entry Cab: steel-sprung, comfort Remote online query function Speed limiter system 12-speed gearbox - Type: G 230-12 Rear axle crown wheel 300 Cabin filter for construction vehicles Comfort telephony (Bluetooth) with inductive charging cradle 3-piece fender with spray protection Fuel tank: 290 l steel left side Cool box / refrigerator Enhanced engine brake Trailing axle 8 t, steerable, liftable PTO MB 123-10c Wheelbase variant 4850 mm Chassis lowering without residual pressure control of air bellows Chassis overhang 1300 mm Rain sensor Retarder Reinforced rear cross member Additional remote-control key (2) Seat cover/upholstery: passenger seat velour Seat cover/upholstery: driver’s seat Dinamica fabric Cab seats: air-suspended driver’s seat, climate-controlled Cab seats: fold-down driver’s seat backrest Exterior sun visor Sun protection roller blind, side window driver’s door Additional stabilizer, rear/trailing axle Steel rims 11.75x22.5 (front axle) Additional 24V socket in front passenger footwell Pre-installation for 4 surround cameras (display in onboard monitor) Pre-installation for rotating beacon Gearbox oil cooler Further equipment: Emission standard EURO 6 Axle configuration: 8x2/4 Front axle load 7.5 t Heated starting/front mirror 24V / 15-pin trailer socket Arocs 5, exhaust to right side Two-piece exhaust system Exhaust pipe bend above 2nd axle Batteries arranged one above the other Compressed air connection in cabin Steel compressed air tank Condensate monitoring air unit Medium air system Automatic driving light activation (light sensor) Cab: Hydraulic tilting device Cab: M ClassicSpace, 2.30 m, 170 mm tunnel Suspension: leaf/air Front springs 7.5 t, 3-leaf Electric window lifters tinted windshield Vehicle without rear wall window Generator 100 A Urea tank (AdBlue): 25 l Manual roof hatch (steel) Body/chassis: chassis, comfort locking system Non-regulated power steering pump Multifunction steering wheel Power steering oil cooling Bljdpfow Umkdsx Aa Ejd 2-cylinder air compressor Heated air dryer Engine 10.7 l - 335 kW in-line 6 diesel (OM 470) Engine variant OM 470 Intended use: local transport Ramp mirror Residual heat utilization Disc brakes with partial protection Disc brakes front and rear axles Remote-control keys (2) LED side marker lights (flashing) Servotwin power steering Passenger comfort seat in cab Front spray guards Front axle stabilizer Steel rims 9.00x22.5 12V socket in front passenger footwell Front steel bumper corners Tachograph / EC control device Automatic daytime running lights Truck Data Center 7 (fleet management system) Fixed rear underride guard Front underride guard Pre-installation for toll recording Pre-installation Truck Data Center (fleet management system) Dropped front axle Regulated water pump Permissible gross weight 32.00 t We are also happy to assist you with financing/leasing through our partners. All information is provided without guarantee. Errors and

Condition: new, Year of construction: 2026, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or Blodpoh Su Ipofx Aa Ejd horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: new, Year of construction: 2026, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head Bledpfeh R S Tcsx Aa Eed - dividing head - counterholder - etc.

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. Blodpfjh Sptnex Aa Eed A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder Bedpfx Aajh I Nqws Ejld - etc.

Condition: used, Vacuum lifting device, vacuum lifter RIVATEC UNIGRIPPER Custom-made as a handling device for an industrial robot Year of manufacture: approx. 2008 Load capacity: approx. 50 kg - 7 suction pads Ø 32 mm (design allows for 12) - 16 suction pads Ø 42 mm (design allows for 20) - 5 suction pads Ø 60 mm (design allows for 6) - a few suction cups missing, see photos (bellows suction pads) - swiveling base body for suction surface at 90° angle or flat 180° - base body pneumatically swiveling - Very elaborate and precise construction with linear guides - Flange plate for suspension or attachment to the robot - Equipped with many Festo components Bodpewywipofx Aa Eeld Required space (L x W x H): 620 x 300 x 300 mm Net weight: 28 kg Good condition 2 units available, price indicated per unit

Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), first registration: 11/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ? Retarder Air suspension rear, 4 air bellows ? Aero Globetrotter XL safety cab FH Bjdpsyhx U Sjfx Aa Ejld ? Wheelbase 3,700 mm ? Emissions according to Euro 6 with SCR, particulate filter and EGR ? Euro 6 emission class EM-EU6 ? I-Torque: efficiency-optimized cruise control with torque management, incl. IRoll & brake cruise control ? Aero/spoiler package ? Roof spoiler. The exact configuration is calculated automatically depending on chassis height, cab, tires, etc. (Please note the planned body height!). ? Side underrun protection, foldable and removable ? Driver Comfort Package Selected ? Static LED cornering lights ? Roof window and emergency exit, manually operable (tinted glass) ? Rain sensor (sensor-controlled wipers) ? Steering wheel adjustment for height and tilt, with additional steering column adjustment ? Living package FH, two beds ? Upper bunk 700x1900 mm, foldable and height adjustable, with safety net ? Lower bunk, foldable, 2000x815/740/660 mm (center, upper, lower) with safety net ? Cab auxiliary heater, 2 kW ? Refrigerator with freezer compartment 33 L ? Interior lighting with dimmer and red night light ? Info and Media Package High ? EBS, Electronic Braking System, Medium Package ? Rear air suspension ? 365 L aluminum tank right, D-shape, 710 mm high ? 610 L aluminum tank left, D-shape, 710 mm high, 1530 mm long ? Marker lights at the rear and on the side (with indicator function) ? Rear connection for trailer/semitrailer, 2x7-pin ? Trailer/semitrailer connection according to EU standard ? Lift function for trailer axles ? LED rear lights ? Brake lights with emergency brake flash function ? I-Shift drive modes: Standard, Performance, and Economy ? I-See with map-based topography and traffic data (high resolution) ? Instrument cluster High with digital, fully dynamic driver information display, 4 selectable views, with traffic sign recognition (in conjunction with lane departure warning). Size: 12 inch with chrome trim ? Digital tachograph, generation 4 ? Speed limiter 90 km/h ? Adaptive cruise control (ACC) with collision warning and emergency braking ? Lane keeping assistant ? Side collision avoidance and turn assist (both sides) ? Radio reception: AM/FM and DAB/DAB+ (analog & digital) ? Reversing monitor/camera ? Side sun visor, driver's side ? Internal sun blind, manual roller ? With writing board for the steering wheel ? Assistance and emergency call service with voice channel ? Comfort driver's seat, air-suspended, heated, seatbelt integrated ? Comfort foam mattress for lower bunk, firm ? Premium mattress topper (30 mm) ? Curtains for windshield and windows ? I-Park Cool (integrated parking air conditioning with automatic temperature control) ? Control console (luxury) at bunk (interior lights, auxiliary heater/AC, roof hatch, door lock, alarm clock, window lifter, and radio) ? Storage compartments above bunk, capacity: 245 ? Two flexible reading lamps ? Tinted windows ? Reinforced cab insulation ? Vehicle overall height max. 4.0 m ? Cab paint Arctic White, DB9147 ? Bumper with spoiler ? Lockable front panel via central locking ? Camera monitor system (CMS) with close-range camera on co-driver side ? Front mirror ? LED main headlights ? Automatic switching between daytime running lights and low beam via light sensor ? Headlamp cleaning system ? Automatic headlight leveling ? LED daytime running lights, 'V-light' ? LED front fog lights ? Jericho horn / air horn (single, front mounted) ? Roof antenna and CB radio preparation

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Blodpfxsu Thpne Aa Eod Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: ready for operation (used), Year of construction: 1998, number of axes: 3, This 3-axis Hartford Omikron VMC-1020 A was manufactured in 1998. It's a vertical machining center that recently had its X-axis bearings replaced. If you are looking to get high-quality milling capabilities, consider the Hartford Omikron VMC-1020 A machine we have for tact us for more information. Machine Benefits Technical Machine Benefits • The x-axis bearings were recently replaced. • The front and rear carriage bellows on the y-axis are missing. Blodpfx Aaox D Nuco Eed • The machine needs to be repainted internally. Extra Information The machine does not have a chip conveyor.