Used Beam for sale (4,515)

Condition: used, Year of construction: 2002, tank capacity: 8,640 l, GENERAL Features: Ventilation/inlet and outlet, crane lugs Design: vertical Year of manufacture: 2002 Remarks: Agitator shaft cut off; welded bolts on the outside of the tank surface (see photos); 1 pipe inside; cylindrical manway approx. 340 x 440 mm Speed: 14 / 30 rpm Internal diameter: 1,980 mm Total height: 4,200 mm Power: 1.2 / 2.2 kW Agitator: beam agitator Support design: height-adjustable feet Location: Bremen Rating plate: Volume: 8,640 liters Product-contact material: stainless steel V2A 1.4301 (AISI 304) Hsdpfx Asxqbkijh Nong Condition: used Cylindrical height: 2,500 mm Last application: lubricant production TANK Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder, in top head (DN 500) Note: slight residues, outlet pipe cut off Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: stainless steel AGITATOR 1 Voltage: 400 V Agitator mounting: centrally in the top head

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Control (CADmatic 4.1 - Professional) Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 Hnedpfx Aod Nt N Ujh Njg OPTIONAL: No. 1 Printer for labels Optimizing Software Schnitt Profi(t) Practive

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, Hnsdpfxjcbq Nwe Ah Nsg circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: used, machine/vehicle number: 007486, Max. panel width: 2100 mm Max. panel length: 4300 mm Hnedet Sn Azspfx Ah Njg Main saw blade projection: 135 mm

Condition: new, Product description: I-Beam Type Hanger Conveyors Conveyor Systems are one of the most important parts of the lines used in automatic coating plants. Our conveyor systems, which carries the parts to be painted in meters per day and kilometers per year, play an important role. Heavy parts to be coated are carried by webb conveyors which perform for long years with their long lasting bearings and steel cast chains. It has a wide carrying capacity range starting from 120 kg to 2 tons. • Operating principle of this type of conveyors is based on transferring suspended materials by chains and trolleys moving on a NPI profile by the help of a drive unit. • WEBB type conveyor chains are made of nodular cast iron or forged steel and subjected to heat treatment afterwards. Hnedpfxody Ewle Ah Nog • Special roller bearings used on trolleys are capable of operating at 200 °C. Greasers placed on trolley bodies provide lubrication for the system. • The drive system can be built based on either the caterpillar system or the gearwheel system, with safety switches and moving trolleys. • Conveyor speed can be easily adjusted by use of a frequency controller. • Chain tensioning system consists of skids and springs. Rollers and support wheels are used for band turns.

Condition: used, tank capacity: 6,510 l, GENERAL INFORMATION Design: suspended Remarks: Several connections were modified by the previous operator (not listed in TÜV documents); vessel mounted on 3 feet made of Fe (not on 4 as shown in the drawings); heating coil in cylinder located only in the lower cylinder area; insulation jacket has sheet metal cut-outs and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/Cooling: available Insulation: available Power: 5.5 kW Max. allowable operating temperature: 165 °C Max. allowable operating pressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: blade agitator Support type: feet Location: Bremen Technical documentation: drawing, TÜV certificates Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 litres Double jacket volume: 34.0 litres Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Last application: ethanol VESSEL Max. allowable operating temperature: 165 °C Number of legs: 3 HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Hodpfsxqbaqex Ah Nong Insulation material: Armaflex Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in upper head (DN 600) Outlet: flange DN65 Note: light residues AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 V Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator position: centrally located in upper head Upper head wall thickness: 8.0 mm

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Hodoimr Icspfx Ah Njng Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes Hnsdpfxjiiiuys Ah Nsg

Condition: used, Year of construction: 2007, tank capacity: 29,000 l, GENERAL INFORMATION Design: vertical Year of manufacture: 2007 Notes: Manhole diameter top head: approx. 700 mm; Manhole diameter shell: approx. 500 mm; Speed: 40 rpm External diameter: 3,200 mm Internal diameter: 2,980 mm Total height: 6,800 mm Heating/Cooling: available Power: 75 kW Max. pressure: 0.6 bar Agitator type: beam agitator Support type: legs Location: outdoor storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 29,000 liters Double jacket volume: 4,100.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Hnjdpfjxqat Njx Ah Nsg Cylindrical height: 3,368 mm Last application: adhesive production VESSEL Max. permissible operating temperature: 100 °C Specific medium weight: 1.3 (to/m³) Number of legs: 4 pieces HEATING/COOLING JACKET Bottom heating/cooling: double jacket EQUIPMENT Manhole / dome: in the shell, in the top head Outlet: DN 125 mm AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 Volt Bottom bearing: TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 9 mm Agitator positioning: central, in top head Top head wall thickness: 7 mm

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Hnodeh Imvhepfx Ah Nsg Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Hedpfx Ahowuz Dys Neng Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Design: upright Outer diameter: 890 mm Hnjdpfexqaqnox Ah Nsg Inner diameter: 650 mm Total height: 2,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Top head: removable / hinged top cover Agitator: beam agitator Support type: feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Capacity: 550 litres Double jacket capacity: 67.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended use: pharmaceuticals TANK Max. permissible operating temperature: 135 °C Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Baffle: Agitator positioning: centrally mounted in the top cover Agitator details: agitator data not readable

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Hnsdpfx Aheu A R D Ds Njg Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 7 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) _____ Max. blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 - Kw 18 Adjustable speed of the saw carriage (m/min) 0 - 160 No. 3 Front supporting tables with Air blowing system Total power (Kw) 35

Condition: used, tank capacity: 19,600 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Presumably 3 cooling coils around the cylinder; heating connections have been cut off; a former manhole in the lower cylinder area was welded shut by the previous owner; the tank feet were cut off during dismantling and are now loose (some minor dents; see photos) Outer diameter: 2,900 mm Inner diameter: 2,700 mm Total height: 5,000 mm Heating/cooling: available Insulation: available Hnsdpexqantefx Ah Nog Max. overpressure: 3.0 bar Agitator: beam agitator Mounting type: height-adjustable feet Location: Bremen Nameplate: Vacuum: 0.9 bar Volume: 19,600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,900 mm Last previous use: dairy VESSEL Number of feet: 4 pcs HEATING/COOLING JACKET Base tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top (DN 500) Outlet: available Note: pressure marks on the insulation jacket, outlet end cut off Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Stelzer Bottom bearing: Agitator arrangement: eccentric in the top Agitator equipment: agitator data not legible; motor/gear unit shows signs of corrosion

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Hnodpfx Aofg Ewzoh Neg Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: used, tank capacity: 5,530 l, GENERAL Features: Spray head, crane lugs Design: vertical Remarks: Double jacket likely with trickle ring – suitable for non-pressurized temperature control only; the welding of the double jacket in the upper area has partially come loose; outlet diameter 65 mm (tapering to approx. 50 mm towards the vessel); minor dents inside the tank; heating connections cut off Speed: 15.5 / 31 rpm External diameter: 1,660 mm Internal diameter: 1,550 mm Overall height: 4,350 mm Heating/cooling: available Power: 0.8 / 1.6 kW Max. overpressure: 3.2 bar Agitator: blade agitator Base type: height-adjustable feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,530 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: dairy TANK Max. permissible operating temperature: 145 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manway / dome: on the top cover (Ø 450 mm) Outlet: present Note: outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel Hodpsxqamcsfx Ah Njng AGITATOR 1 Supply voltage: 380 Volt Bottom bearing: Agitator arrangement: eccentric, on the top cover

Condition: used, tank capacity: 2,420 l, GENERAL Equipment: Lifting lugs Design: suspended Remarks: Manhole DN 350/450 (manhole cover incomplete); support ring, Fe; flanges partially Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 3,400 mm Heating/Cooling: available Power: 2.2 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: top head removable / hinged Agitator seal: Mechanical seal with thermosiphon vessel Agitator type: Paddle agitator Support type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Jacket volume: 100.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,180 mm Last application: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in the top head Outlet: available MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Hnjdpfx Ahjxqaycs Njg Agitator manufacturer: Ekato Voltage: 400 Volt Power breaker: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator arrangement: centered in the top head Agitator equipment: Paddle & propeller agitator elements mounted on the shaft; speed previously controlled by external frequency converter (no longer available); various technical documents for the agitator available Top head wall thickness: 7 mm

Condition: used, tank capacity: 3,690 l, GENERAL INFORMATION Design: suspension-mounted Remarks: Support ring made of steel; manway cover incomplete; on one vessel, the heating connections are mostly cut off and supplied loose; one vessel is approximately 100 mm shorter in overall height due to different motor/gearbox assemblies Speed: 42 - 211 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,750 mm Hnedpfx Asxqax Ejh Njg Heating/Cooling: available Power: 3 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: blade agitator Support design: ring mounting Location: Bremen Technical documentation: drawing, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 litres Double jacket volume: 145.0 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemistry VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating underpressure: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator positioning: centred on the top head Agitator features: Minor variations in agitator design (Interprop blade agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel an additional stabilising propeller is mounted on the shaft); speed range adjustable via external speed controller (no longer available) (for one of the agitators this speed range is 25 - 126 rpm); partial technical documentation on agitators available Top head wall thickness: 7.9 mm

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: lifting lugs Design: suspended Remarks: Sight glasses in manway covers missing; support ring made of Fe; some flanges made of Fe Speed: 30–184 rpm Internal diameter: 1,600 mm Hnjdexqaxxjpfx Ah Nsg Explosion proof: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Power: 6.8 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: beam agitator Base design: ring Location: Bremen Technical documentation: drawings, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Capacity: 3,586 liters Double jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: pharmaceutical chemicals VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: 130 mm MATERIAL DETAILS Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 Volt Current interrupter: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: centrally in top head Agitator equipment: Technical documentation for agitator available; Interprop beam agitator and inclined blade agitator installed on shaft; speed adjustable by handwheel Top wall thickness: 9.1 mm

Condition: used, tank capacity: 3,860 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Notes: Support ring, Fe; manhole cover incomplete (see photos) Rotation speed: 61 rpm External diameter: 2,090 mm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Insulation: available Power: 4 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand/base type: Ring Location: Bremen Technical documentation: Drawing, various documents Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 litres Double jacket volume: 136.0 litres Cylinder wall thickness: 6 mm Product contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Hnodpfxexqaxlj Ah Nog Insulation jacket: riveted Insulation jacket material: aluminium EQUIPMENT Manway / Dome: in upper head (DN 600) Outlet: available Note: Dents in insulation jacket, manway cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Agitator arrangement: centrally positioned in upper head Agitator equipment: Gearbox housing slightly damaged in one area (see photos) Upper head wall thickness: 8.14 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: crane lugs Design: suspended Notes: 4 support brackets made from V2A; manhole cover fastening bolts incomplete; 1 former connection on the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator: beam agitator Agitator mounting: agitator flange Support type: brackets Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last previous use: chemicals Hnedpfxoxqaw Is Ah Nsg VESSEL Max. permissible operating temperature: 190 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) Discharge: flange DN50 Note: slight adhesions, motor/gearbox missing MATERIAL QUALITY Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 2 Agitator arrangement: lateral on cylinder AGITATOR 1 Agitator manufacturer: Ekato Baffle: TECHNICAL DATA / DIMENSIONS Base wall thickness: 4.6 mm Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 5,000 l, GENERAL INFORMATION Equipment: Ball valve Design: Suspended Remarks: Top cover made from V2A (1.4301); 4 support feet made of steel; minor material wear inside the vessel Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: present Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Removable / hinged top cover Agitator type: Beam agitator Stand type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: Used Cylindrical height: 1,580 mm Last application: Chemical industry Hnsdpoxqawuofx Ah Nog HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: On the top cover (Ø 450) Outlet: DN40 DIN 11851 Note: Light residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR 1 Agitator manufacturer: Fluid TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator arrangement: Centered in top cover Top cover wall thickness: 4.5 mm

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Lifting lugs Design: Suspended Remarks: Lugs made of steel; the insulation jacket has partially detached in the area of the lower base (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Insulation: available Power: 2 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 6.0 bar Hjdpjxqah Hjfx Ah Neng Max. excess pressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support design: Feet Location: Bremen Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 liters Double jacket volume: 166.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C Number of legs: 4 pieces HEATING/COOLING JACKET Bottom tempering: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: galvanized steel EQUIPMENT Manhole/dome: in top head (DN 500) Outlet: 140 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator mounting: central in the top head Agitator equipment: Provisions for flow breakers inside the vessel (flat plates for flow breakers not present; see photos)

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Venting, spray head, crane lugs Design: Upright Outer diameter: 3,880 mm Inner diameter: 3,700 mm Total height: 9,200 mm Insulation: available Agitator: Beam agitator Base type: Skirted base Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous application: Food TANK Bottoms: Conical bottom EQUIPMENT Manhole / dome: in the shell AGITATOR 1 Hsdox Dmcqepfx Ah Nsng Bottom bearing: Agitator arrangement: eccentric on top head

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues Hodpjx Dmbaofx Ah Neng MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head