Used Beam Saw for sale (11,059)

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: crane lugs Design: suspended Notes: 4 support brackets made from V2A; manhole cover fastening bolts incomplete; 1 former connection on the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator: beam agitator Agitator mounting: agitator flange Support type: brackets Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last previous use: chemicals VESSEL Max. permissible operating temperature: 190 °C Dsdpfxsxqaw Is Ab Tocr HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) Discharge: flange DN50 Note: slight adhesions, motor/gearbox missing MATERIAL QUALITY Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 2 Agitator arrangement: lateral on cylinder AGITATOR 1 Agitator manufacturer: Ekato Baffle: TECHNICAL DATA / DIMENSIONS Base wall thickness: 4.6 mm Agitator arrangement: eccentric in top head

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Dcedpex Dmavsfx Ab Tsr Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm Dedjvwczyspfx Ab Tocr - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 2020, functionality: fully functional, cutting height (max.): 150 mm, saw blade diameter: 425 mm, cutting width (max.): 600 mm, chain width: 600 mm, type of input current: three-phase, input voltage: 400 V, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW Dcedpfxsx Dkyys Ab Tjr - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: used, Year of construction: 2022, Optimization cross-cut saw Weinig type OptiCut 260 for automatically cutting wood according to defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects. Technical specifications: tba saw blade ø: 500 mm input length: 400 - 6300 mm input thickness: 12 – 80 mm Dcsdpfxsx Ditfj Ab Tjr feed: max. 250 m/min cutting height: 260 mm bars: about 1 second saw motor: 7,5 kW marking station: 5.000 mm exit belt: 7,5 m Control: OptiCom Pro Construction year: 2022

Condition: used, tank capacity: 5,000 l, GENERAL INFORMATION Equipment: Ball valve Design: Suspended Remarks: Top cover made from V2A (1.4301); 4 support feet made of steel; minor material wear inside the vessel Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: present Max. permissible operating overpressure: 16.0 bar Dsdpfx Aboxqawuo Tocr Max. overpressure: 3.2 bar Top cover: Removable / hinged top cover Agitator type: Beam agitator Stand type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: Used Cylindrical height: 1,580 mm Last application: Chemical industry HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: On the top cover (Ø 450) Outlet: DN40 DIN 11851 Note: Light residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR 1 Agitator manufacturer: Fluid TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator arrangement: Centered in top cover Top cover wall thickness: 4.5 mm

Condition: new, CATALOGUE NUMBER RE022 Djdpfjd Sg Hxex Ab Tocr – new machine, in stock – DTR + CE documentation – cutting width at the guide 1300mm – main engine 6kW TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - cutting length on the carriage 3000mm - main spindle speed 3500/4500rpm - spindle diameter 30mm - main blade diameter 300-400mm - max. scoring diameter 125mm - scoring engine power 0.75kW - scoring speed 8500rpm - spindle diameter 20mm - cutting width at the guide (standard 1050mm, option 1300mm) 1300mm - sawing width using bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90°/45° 90/60mm - cutting height for 350mm 90°/45° 5-115 / 3.5-80mm - cutting height for 400mm 90°/45° 25-140 / 15.5-95mm - diameter of the exhaust port 80mm, 125mm - dimensions length/width/height 3300/3460/1500mm - weight 750kg Optional equipment: - angle ruler - with aluminum strip - additional support table - additional start/stop in the formatting table - electronic cutting width reader on the longitudinal ruler - electronic cutting width reader on the auxiliary table - formatting table 3200mm, 3900mm, 2500mm Net price: PLN 41,550 Net price: EUR 9,890 Net price calculated according to the exchange rate of PLN 4.20/EUR (with larger exchange rate fluctuations, the price may change) The prices given are net prices. Net price given for international transactions, customers from the EU with an EU tax identification number.

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Lifting lugs Design: Suspended Remarks: Lugs made of steel; the insulation jacket has partially detached in the area of the lower base (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Insulation: available Power: 2 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 6.0 bar Max. excess pressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support design: Feet Location: Bremen Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 liters Double jacket volume: 166.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Pharmaceutical chemistry Dedjxqah Hspfx Ab Tscr VESSEL Max. permitted operating temperature: 200 °C Number of legs: 4 pieces HEATING/COOLING JACKET Bottom tempering: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: galvanized steel EQUIPMENT Manhole/dome: in top head (DN 500) Outlet: 140 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator mounting: central in the top head Agitator equipment: Provisions for flow breakers inside the vessel (flat plates for flow breakers not present; see photos)

Condition: excellent (used), CATALOG NUMBER 7050 TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm - Angle-adjustable table Djdpsmrrl Ujfx Ab Tscr - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm - Extraction port diameter: 90 mm - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Venting, spray head, crane lugs Design: Upright Outer diameter: 3,880 mm Inner diameter: 3,700 mm Total height: 9,200 mm Insulation: available Agitator: Beam agitator Base type: Skirted base Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous application: Food Dcodpfxox Dmcqs Ab Ter TANK Bottoms: Conical bottom EQUIPMENT Manhole / dome: in the shell AGITATOR 1 Bottom bearing: Agitator arrangement: eccentric on top head

Condition: excellent (used), CATALOG NUMBER 6909 TECHNICAL DATA - Bandwheel diameter: 800 mm - Band width: 20 mm - Maximum cutting height: 400 mm - Main motor: 4 kW Feed: - Metal, geared, driven roller - Feed roller height: 130 mm - 8 feed speed options: 2.5; 5; 7.5; 9; 12.5; 15; 18; 25 m/min - Motor: 0.4 kW - Table dimensions (L/W): 810x980 mm - Cast iron table, angle adjustable - Guide with 14 metal slide rollers - Throat (band to frame): 780 mm - Brake - Extraction port diameter: 100 mm - Overall dimensions (L/W/H): 1500x1070x2410 mm - Weight: 560 kg – Resaw for lamella production – Equipped with material feed – Brake – Used machine, very good condition Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change) Dodjkyrzpopfx Ab Tecr

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Dcodpox Dmbaefx Ab Tjr Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head

Condition: excellent (used), CATALOG NUMBER 7051 TECHNICAL SPECIFICATIONS - Wheel diameter: 630 mm - Table dimensions: 890x710 mm Dsdpfsmrrm Djx Ab Tjcr - Table adjustable in angle - Motor: 3 kW - Max cutting height: 240 mm - Throat (band to frame): 570 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1250x800x2300 mm - Weight: 681 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 7,900 PLN Net price: 1,880 EUR depending on the rate 4.2 EUR (Prices subject to change in case of significant fluctuations)

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm Dsdpfxsxpvk Ij Ab Tecr - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm - table dimension: 115x625mm - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7044 Dodpfxomih Sfj Ab Tscr TECHNICAL SPECIFICATIONS - Circular saw blade diameter: 250 mm - Blade bore diameter: 30 mm - Number of saw blades: 2 pcs - Minimum cutting width: 30 mm - Maximum cutting width: 150 mm - Maximum cutting height: 35 mm - Minimum workpiece length: 620 mm - 4 upper slip rollers - Upper rollers serve as material hold-down - Bottom feed chain - At the outlet: 1 upper and 1 lower metal slip roller - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 4 kW - Extraction port diameter: 130 mm - Infeed table dimensions (L/W): 1550x350 mm - Total discharge tray dimensions (L/W/H): 3150x700x870 mm - Overall machine dimensions (L/W/H): 2150x950x2050 mm - Total weight: 350 kg – Very good condition, – Used saw Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW Dsdpjurkgpsfx Ab Tecr - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit - Spindle diameter: 30 mm - Spindle locking - With sliding table - Cutting length on sliding table: 2800 mm - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm - Table dimensions with extension: 1230 mm - Table dimensions with extension: 2070 mm - Saw blade guard - Dimensions (L/W/H): 2940 x 3400 x 1420 mm - Weight: 1100 kg Dodpfxowgdh So Ab Tscr ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate changes, the price may change)

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Scope of delivery: Dcjdpfsvwlfbsx Ab Tjr LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available Dcedpfxexhdm Io Ab Ter – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7603 TECHNICAL SPECIFICATIONS - automatic sharpening speed - tooth counter - suitable for wide band - grinding wheel size: 240 mm Djdov Sb Uzopfx Ab Tecr - motor power: 0.12 kW, 0.75 kW, 400 V - dimensions (L/W/H): 3600x1600x1500 mm - weight: 140 kg ADVANTAGES – made in Poland – with tooth counter – for wide band – unpainted – used sharpening machine – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track Dcedpov Ed Uwsfx Ab Ter - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7213 TECHNICAL DATA - Max cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Max blade diameter: 300 mm - Blade bore diameter: 80 mm - Min element length: 630 mm - Max element width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal hold-down rollers - Pawls - Saw shaft - Smooth hold-down roller - Pawls - Smooth hold-down roller From below: - 2 metal feed rollers, toothed - Pawls - Track - Saw shaft - Track - Infinitely variable feed speed adjustment via inverter - Main motors: 2 x 55 kW - Feed motor: 4 kW - Hydraulic lifting of the upper body - Hydraulic saw shaft adjustment - Pump motor: 0.37 kW - Central lubrication - Extraction port diameter: 1 x 300 mm, 1 x 380 mm - Dimensions (L x W x H): 3200 x 2350 x 2000 mm Dcedeqy H Eujpfx Ab Tor - Weight: approx. 5500 kg ADVANTAGES – Italian made – Twin-shaft – Used multi-blade saw, in very good condition Net price: 238,900 PLN Net price: 56,880 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm Dcedpfx Abjkyr H Ae Tsr - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Multiple-shaft circular saw (gang saw) by FOD BYDGOSZCZ* DPPA III 50E 620/120 Catalogue Number: 7407 Dcjdpfx Aourkdzsb Ter TECHNICAL SPECIFICATIONS: - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of the shaft with saw blades: 620 mm - Maximum saw blade diameter: 450 mm - Saw blade bore diameter: 90 mm Upper side: - Kickback pawls - 2 toothed driven rollers Lower side: - Kickback pawls - 2 smooth driven rollers - Saw blade shaft - Smooth driven roller - 2 feed speed options - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2370x1400x1800 mm - Weight: approx. 3000 kg – Polish production – Used machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (based on an exchange rate of 4.2 EUR) (Prices may change depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer for the manufacturer. All trademarks and names are used purely for informational purposes to identify the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business association with the manufacturer.

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Shaft width: 400mm - Shaft diameter: 80mm - Maximum blade diameter: 400mm - Blade bore diameter: 80mm - Maximum cutting height: 140mm - Table width with clearance: 730mm - Table length: 2130mm From the top: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth - Saw shaft - Smooth pressure shaft, 4 pcs From the bottom: - Smooth slip shaft - Pawls - Track Infeed table + guide rail: - Roller width: 460mm - Feeder dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Feed rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Centralized lubrication - Electric body raising/lowering: 0.55kW - Electric adjustment of saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm - Overall dimensions of multirip saw (L/W/H): 2520x1870x2000mm + control panel - Total weight: approx. 2500kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw, very good condition Dcedpfxjqzhiqs Ab Ter Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)