Used Batch Reactor for sale (1,227)

Condition: used, tank capacity: 10,875 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; In some areas, the flanges of the top head were welded on the inside with a stainless steel sheet by the previous operator (in some of these sheets, an opening has been cut – see photos); Manhole diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Rbjdpfexqa Nwox Ahzet Max. overpressure: 6.0 bar RW Sealing: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Standing form: Ring Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Double-jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Double-jacket material: V2A 1.4301 (AISI 304) Product-contact surface material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 2,200 mm Previous application: Adhesives industry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in top head Outlet: present Note: minor residues, manhole cover missing Outlet: 100 mm MATERIAL SPECIFICATION Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Agitator arrangement: central in top head Top head wall thickness: 14 mm

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manhole diameter approx. 480 mm; total height including agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/cooling: available Power: 5 / 15 kW Max. permitted operating temperature: 220 °C Max. permitted operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: frame blade agitator Base shape: ring Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Rbjdpfx Ahjxqavdszot Double-jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contacting material: V2A 1.4541 (AISI 321) Condition: used Last application: chemical industry VESSEL Max. permitted operating temperature: 200 °C HEATING / COOLING JACKET Max. permitted operating vacuum: 1.0 bar (negative pressure) Bottom temperature control: half-pipe coil EQUIPMENT Manhole / access hatch: in top head Note: motor missing, manhole cover plated Outlet: 105 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Flange material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm AGITATOR 1 Agitator positioning: centered in top head Agitator equipment: agitator element: frame blade agitator; agitator motor missing but available from manufacturer; various agitator documentation available Top head wall thickness: 14 mm

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal tank with signs of corrosion (see photos); overall height incl. agitator gearbox (approx. 3400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Overall height: 4,950 mm Heating/Cooling: present Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable / hinged top head Agitator: Beam agitator Support type: Ring Location: Bremen Technical documents: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Rodpfx Ahoxqau Tezsbt Volume double jacket: 313.0 liters Cylinder wall thickness: 8 mm Product-contacting material: Stainless steel V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Previous use: Chemicals TANK Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable negative operating pressure: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top head Notes: Motor missing, manway cover missing Outlet: 100 mm MATERIAL SPECIFICATION Temperature control system material: Stainless steel V4A 1.4571 (AISI316) Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator equipment: Agitator type: Frame blade agitator; agitator motor missing but available from manufacturer; various agitator documentation available Top head wall thickness: 14 mm

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Redpfjinigmex Ahzobt Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Mod. TFU200/L/30/12/S

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Rbjdskt Uuaspfx Ahzjt Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Rjdji Hn Srepfx Ahzsbt Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Rjdpfx Aholtmnlozjbt Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Rsdpfx Aheifnzdjzsbt In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 48 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)

Condition: used, Applicable material: Concrete POLYGONMACH PMC150 150m3 mobile concrete batching plant is a mobile concrete batching plant used to produce large quantities of concrete in large construction projects. These power plants are portable and rebuildable, can work with a wide range of materials and can be used for many construction projects due to their mobility. The following steps are recommended to use the POLYGONMACH 150m3 mobile concrete batching plant effectively: 1. Correct positioning: The switchboard should be installed at the easiest access point possible. It must be securely located and engineers must ensure primary resources are in place. 2. Personnel: Plant operators must be experienced and trained to ensure the best results in construction projects. Employees should be trained regularly and use appropriate protective equipment to work inside the plant. 3. Maintenance: Regular maintenance ensures longer life and efficient operation of the plant. This can reduce disruptions and prevent irregularities in mobile switchboard operations. 4. Production: In addition to their productivity, 150m3 mobile concrete batching plants have technologies that enable the production of high quality concrete. Therefore, it is important to use the right concrete mix to ensure efficient production every time. 5. Storage: The produced concrete should be stored correctly and well protected until the time of use. Ideal storage conditions will ensure safe handling and trouble-free use of concrete. Mobility: mobile Rbodox D A Icopfx Ahzet Capacity: 150 m³/h

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Rbodpfxohg Niqe Ahzot Enamelled tank

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Tank diameter: 2250mm Redehg Nk Depfx Ahzsbt heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 5000 L Type: Standing on three feet Rodpfjhg Nlpsx Ahzobt Tank diameter: 2100mm heatable/coolable double jacket

Condition: good (used), A used Batch Roaster for Almonds 2015 from J Borrell - gas fired - control unit including flues Rbsdpfxjx Nf Nvs Ahzot Ready to ship worldwide Export Documentation and Shipping options available Please request pictures and videos via Whats App

Condition: used, tank capacity: 3,690 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Manhole cover incomplete (among others, the sight glass is missing, see photos); support ring made of Fe Speed: 6 - 32 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 4,350 mm Heating/cooling: available Power: 11 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Base: Ring Location: Bremen Technical documentation: Drawing, various documents, inspection certificate Jacketed cylinder temperature control: Half-pipe coil Rating plate: Vacuum: 1.0 bar Volume: 3,690 liters Jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Wetted material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil Rsdpfxjxqayio Ahzsbt EQUIPMENT Manhole/dome: in the top cover (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: centered in top cover Agitator equipment: Agitator drive was previously controlled by an external speed controller (no longer present); various technical documents for the agitator available Top cover wall thickness: 7.9 mm

Condition: used, tank capacity: 2,420 l, GENERAL Equipment: Lifting lugs Design: suspended Remarks: Manhole DN 350/450 (manhole cover incomplete); support ring, Fe; flanges partially Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 3,400 mm Heating/Cooling: available Power: 2.2 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: top head removable / hinged Agitator seal: Mechanical seal with thermosiphon vessel Agitator type: Paddle agitator Support type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Jacket volume: 100.0 liters Cylinder wall thickness: 6 mm Rbodpexqaycefx Ahzot Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,180 mm Last application: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in the top head Outlet: available MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt Power breaker: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator arrangement: centered in the top head Agitator equipment: Paddle & propeller agitator elements mounted on the shaft; speed previously controlled by external frequency converter (no longer available); various technical documents for the agitator available Top head wall thickness: 7 mm

Condition: used, tank capacity: 3,690 l, GENERAL INFORMATION Design: suspension-mounted Remarks: Support ring made of steel; manway cover incomplete; on one vessel, the heating connections are mostly cut off and supplied loose; one vessel is approximately 100 mm shorter in overall height due to different motor/gearbox assemblies Speed: 42 - 211 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,750 mm Heating/Cooling: available Power: 3 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: blade agitator Support design: ring mounting Location: Bremen Technical documentation: drawing, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 litres Rbjdpfxoxqax Ee Ahzot Double jacket volume: 145.0 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemistry VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating underpressure: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator positioning: centred on the top head Agitator features: Minor variations in agitator design (Interprop blade agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel an additional stabilising propeller is mounted on the shaft); speed range adjustable via external speed controller (no longer available) (for one of the agitators this speed range is 25 - 126 rpm); partial technical documentation on agitators available Top head wall thickness: 7.9 mm

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: lifting lugs Design: suspended Remarks: Sight glasses in manway covers missing; support ring made of Fe; some flanges made of Fe Speed: 30–184 rpm Internal diameter: 1,600 mm Explosion proof: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Power: 6.8 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: beam agitator Base design: ring Location: Bremen Technical documentation: drawings, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Capacity: 3,586 liters Double jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: pharmaceutical chemicals VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: 130 mm MATERIAL DETAILS Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 Volt Rodpfx Aoxqaxxehzsbt Current interrupter: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: centrally in top head Agitator equipment: Technical documentation for agitator available; Interprop beam agitator and inclined blade agitator installed on shaft; speed adjustable by handwheel Top wall thickness: 9.1 mm

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: Lifting lugs Design: Suspended Remarks: Further technical documentation available; Sight glass on manhole cover is missing; Support ring made of mild steel; Flanges partly made of mild steel Speed: 6 - 40 rpm Internal diameter: 1,600 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be checked) Total height: 4,250 mm Heating/cooling: Available Power: 3.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Seal type: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Base type: Ring base Location: Bremen Technical documentation: Drawing, acceptance certificate Jacket heating/cooling: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 liters Double-jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: Stainless steel V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 1,377 mm Last application: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base heating/cooling: Half-pipe coil EQUIPMENT Manhole / Dome: On top head (DN 500) MATERIAL SPECIFICATION Jacket system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volts Rbjdpfx Ahsxqaxrjzet TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: Centered on top head Agitator equipment: Drive adjustable via handwheel Top head wall thickness: 9.1 mm

Condition: used, tank capacity: 890 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: 4 mounting feet, Fe; outlet with flanged fitting Speed: 6.7 - 41 rpm Outer diameter: 1,200 mm Inner diameter: 1,100 mm EX-protected: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 2,700 mm Heating/Cooling: available Power: 1.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Rbsdpjxqaiwefx Ahzet Support design: Mounting feet Location: Bremen Technical documentation: Drawing, various documents, inspection certificate Cylinder temperature control: Jacketed Nameplate: Vacuum: 1.0 bar Volume: 890 liters Jacket volume: 145.0 liters Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Last application: Chemical VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom plate temperature control: Double jacket EQUIPMENT Manhole / Dome: Top head (DN 400) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 220/380 volts TECHNICAL DATA / DIMENSIONS Bottom plate wall thickness: 10 mm Agitator arrangement: Centrally on top head Agitator features: Drive steplessly adjustable via handwheel Top head wall thickness: 8 mm

Condition: used, tank capacity: 8,550 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Feet made of Fe; Flanges partially made of Fe Speed: 8.5 - 51 rpm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 5,200 mm Heating/Cooling: present Power: 15 kW Max. allowable operating temperature: 200°C Max. allowable operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates Cylinder temperature control: Half-pipe coil Nameplate: Rbedpfx Ahexqah Tozjt Vacuum: 1.0 bar Volume: 8,550 liters Double jacket volume: 160.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,200 mm Last application: Pharmaceutical chemistry VESSEL Max. allowable operating temperature: 200°C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: In top head (DN 500) Outlet: Flange DN150 MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 380 Volt Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom plate wall thickness: 8 mm Agitator arrangement: Centered in the top head Agitator equipment: Drive was controlled by an external speed controller by the previous owner (no longer present) Top head wall thickness: 10 mm

Year of construction: 2015, condition: excellent (used), 3 cement silos 100T with filters, installation in a mobile system Rbodpox I D S Hsfx Ahzot

Condition: refurbished (used), Year of construction: 2015, BOHLE Vagumator® VMA 300 V batch granulator This intensive mixer-granulator is designed for the production of wet granulate with subsequent vacuum drying in batch sizes of 40–130 kg. In 2010, a HYFRA VWK 70/1-S cold water treatment unit was retrofitted for the vacuum condenser, with a cooling capacity of 6.6 kW at 32°C. In 2015, the entire machine and process control system was replaced. Rbodsxvzbljpfx Ahzst In 2015, two Single Advanced N1-90-18-80 temperature control units were installed, each with a heating capacity of 18 kW and a cooling capacity of 80 kW for water up to a maximum temperature of 90°C. Manufacturer: L.B. Bohle

Condition: used, machine/vehicle number: 007486, Max. panel width: 2100 mm Max. panel length: 4300 mm Rsdpot Sn Azjfx Ahzobt Main saw blade projection: 135 mm

Condition: used, machine/vehicle number: 008301, Position 1: edge bander batch 1 IMA - SIRIO-NOVIMAT/I/R75/1000/R3 Position 2: Panel Stacking and Offloading IMA - SIRIO-NOVIMAT/I/R75/1000/R3 Rbjdpfsx A Tmmex Ahzjt

Condition: new, Year of construction: 2025, HIGH RANGE TECHNOLOGY AT THE LOWEST PRICE IN THE MATKETPLACE, DON'T MISS THE CHANCE. CUSTOMER SATISFACTION IS OUR MAIN TARGET CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. GENERAL TECHNICAL SPECIFICATIONS Plant type: Mobile concrete plant with Bunker Feeding and Horizontal shaft mixer Plant Capacity : 120m³ / hour compressed fresh concrete Mixer Capacity : 3000 Liter (3m³ Compressed Concrete) Mixer Type : Double Shaft Mixer Total Motor Power : 180 kw Standard Value. It may vary depending on the equipment. Voltage / frequency : 380V / 50Hz Standard Value Electronical equipment : Siemens Other equipment & accessories : Italy / Germany Automatic lubrication system (ILC : ITALIAN) ALL IN ONE (with software package), printer, uninterruptible power supply and SCADA software package, all control and monitoring processes, all kinds of reporting, failure notifications, etc. This process is done on the computer screen and with animation support. FOR MORE INFORMATION PLEASE CONTACT US NOW Whatsapp / Viber Rbodpfew Sv Ndox Ahzjt