Used Basic Baking for sale (2,159)

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Gjdoudk Agopfx Agboil

Condition: like new (used), Miwe Econo from 2019, 60x40 trays with self-cleaning system, steam function, and condenser on top. Gedpfx Asxywu Njgbsil

Condition: used, Lorch - MIG-MAG Inverter, MicorMIG 400 BasicPlus - Water-cooled suitcase system with controls in removable full-protection wire feed case, intermediate hose package 1m MicorMIG 400 BasicPlus - Water-cooled suitcase system Contactless data transfer The digital interface enables easy access to and management of your power source using Lorch NFC cards. Card management supports user permission control, allows reading and writing of jobs, and offers upgrade capabilities. Crater fill at weld end The switchable end crater filling ensures that the welding current does not end abruptly but is intentionally reduced. This allows the weld pool to cool and automatically fills the end crater with material at lower energy input. Arc dynamics control With arc dynamics regulation, you can select your preferred arc characteristics. Depending on the control panel, a range of dynamic levels from "soft" to "hard" are available. Gjdpfex Tg Dvex Agbsil Infinitely adjustable welding inverter Unlike transformer systems, the Lorch MicorMIG allows the current-voltage ratio to be continuously adjusted to meet the required welding parameters. Versatility The Lorch MicorMIG operates with both Argon-CO₂ mixed gas and 100% CO₂, making it suitable for international use. Powermaster The Lorch Powermaster torch allows you to set all key parameters, such as work points and arc dynamics, directly from the handle. EN 1090 certified With the Lorch MicorMIG, synergetic control and automatic settings make it possible to weld in conformity with EN 1090. When combined with the Lorch EN 1090 advantage package and parameter settings via NFC cards, you are prepared for all welding applications. BasicPlus control concept: - “3-step and weld” operating concept - Stepless welding current adjustment - Volt-ampere display - Switchable end crater fill (adjustable via submenu) - 7-level arc dynamics control - With automatic setup (synergy function) - Welding program selection in the wire feed compartment - 2-/4-step, spot, or interval welding selection - Fully upgradable Technical data: - MIG MAG welding range: 30–400 A - Stepless inverter - Weldable wires: 0.6 mm – 1.6 mm - Duty cycle at 100%: 300 Amps - Duty cycle at 30%: 370 Amps - Duty cycle at max current: 45% - Mains voltage: 3~400 V - Dimensions (mm): 880 x 490 x 955 - Weight: 61 kg

Condition: new, Year of construction: 2026, Gannomat hinge boring and hardware insertion machines are hardware manufacturer independent and designed for the precise drilling and insertion of hardware. Robustness, durability and ease of use distinguish our universal hinge drill machines. Short introduction: • Independence from hardware distributors and manufacturers • Precision drilling unit with steel gears and steel clutch • Universal application: hinges, row of holes as well as line drilling, connectors and fittings, handle and through holes, holes for drawer slides, ... Godedx Axuspfx Agbsil • Massive and stable tilt stops • Distance from the front stop to drilling spindles up to 300 mm (Basica Variabel)

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Gsdpfx Aetz Dkyjgbeil

Condition: as good as new (ex-display), Year of construction: 2023, Manual miter band saw for Miters left up to 45° and right up to 30° cutting range Ø 230 mm or 230 x 230 mm drive power 1,1 /1,5 kW saw band 2.720x27x0,9 mm band speed 40/80 m/min connection 400V Gsdokhbg Ujpfx Agbsil incl. - Ergonomic operation - Monitoring of saw band tension - Quick vice adjustment - Coolant device with chip collection tray

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Godpsx Twdyefx Agboil

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 Gedewp S Sqjpfx Agbjil FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Giedpfohbdg Uox Agbel Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The Roturn 400 C is a high-performance CNC Slant Bed Lathe designed for precision and efficiency in the category of 2-axis CNC Lathes. This machine exemplifies the robust capabilities typical of the ROTURN C series, featuring advanced Siemens 828 D Basic control technology, which ensures compatibility with current standards. It is equipped with a powerful 15 kW main spindle motor, an 8-station tool turret for rapid tool changes, and a hydraulic 3-jaw chuck with a through-hole. The inclined bed design promotes rigidity and ease of chip removal, while precise linear guides enhance stability under high loads. A hydraulically operated tailstock with 85 mm stroke, automatic central lubrication, and a high-performance coolant system are among the included standard equipment. Buyers can expect a versatile machine that meets complex manufacturing demands. To explore the capabilities of the Roturn 400 C further, request a quote today for this CNC Slant Bed Lathe, and experience the advantages of investing in a quality tool from KNUTH. Gjdpfxsu E Hyte Agbsil

Condition: good (used), Pneumatic press, pneumatic punch press, multi-function punch press, punch press, universal punch press, punching machine, hydraulic press, basic press, punching press -Manufacturer: Schüco, base press with base -Item No.: 280 226 with base 299 504 -Stroke: 20 mm -Pressing force: 32 kN -Operating pressure: 7 bar -Operation: via foot switch Gjdpfxox Tdmnj Agbsil -Receiver: Groove 16/28 mm, see photo technical drawing -Dimensions: 400/400/H930 mm -Weight: 91 kg

Condition: excellent (used), Product Information "POLY-PTX 800 satin finishing machine" From the inventor of the longitudinal sander. Our multifunctional longitudinal sander with 1750 watts of power, speed control, ergonomic design and versatility - including up to 150 mm working width. High torque and power reserves guarantee professional, continuous use and greater profitability. Features: Infinitely variable speed control from 1000 to 3800 min-1 with a tachogenerator to ensure constant speed even under load. Grinds from coarse to fine. Balanced, simple manual guidance without support rollers. This allows free movement (oscillation effect). Guarantees shadow-free, seamless, highly decorative surfaces in satin, matte and industrial finishes. It satin polishes to a mirror shine and refines the surfaces of stainless steel, steel, non-ferrous metals such as brass, bronze, copper, aluminum, as well as wood. Finest sanding on large surfaces, without shadows or edges. Removes welds, deep scratches, rust, dirt, layers of paint and oxides. Goes from coarse grinding to mirror shine on stainless steel and non-ferrous metals in just three steps. It's also ideal as a round tube grinder using a sanding belt roll. Grinds and polishes open and closed pipe structures. For pipe processing, the "hole system" allows safe and fast bonding of fleece and felt tapes to closed pipe structures. It does not require complex tape bonding. Huge range of grinding tools , which offers a solution for every task. With rubberized handle for optimal handling! Set contents: 1 POLY-PTX® 800 basic unit 1 robust, impact-resistant plastic carrying case Godpfx Agsu Su Tzjbjil 1 QUICK-LOCK cable 4 m 1 POLY-PTX® mounting screw 1 fleece disc 100 mm wide Machine type: Satin finishing machine Cable/battery: Cable Suitable tools: Brushes, bushings, polishing rings, wheels Plug type/power connection: EU (C+F) 220-240 V ~ 50-60 Hz Power consumption: 1750 watts Max tool size: Diameter 115 x width 100 mm Tool holder: 19mm spline shaft WEEE Reg. No.: DE 51395731 Speed in min-1: 1000 - 3800

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Giodpfjx Twdtex Agbjl

Condition: good (used), Year of construction: 2008, max. workpiece diameter 300 mm ca. 6 mm hob turning speeds 90-900 U/min Size of table plate Ø 300 mm table turning speeds 135 U/min Torque max. 445 Nm voltage 400 V total connected load ca. 50 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 3,5x2x3,0 m Gleason-PFAUTER GP 300 CNC gear hobbing machine for gear cutting on shaft-shaped and wheel-shaped workpieces with all rollable profiles and shapes occurring regularly around the circumference of cylindrical workpieces. In the basic version for wet milling with cooling lubricants or as an option for dry milling. SIEMENS SINUMERIK 840 D motion control system with 5 axes and 1 spindle (basic configuration) as well as electronic gearbox (EG) and integrated safety functions. Gijdpfxjx Ti A Is Agbsl * 19" flat control panel OP 012 with - integrated PC system PCU 50 with Windows XP operating system Smallest/largest distance between cutter and workpiece axis - 30/230 mm Largest axial slide travel - standard version 250 mm Max. cutter dimensions - diameter 140 mm + length 220 mm Swivel range of the milling head +/- 45° Maximum cutter travel 200 mm Cutter arbor taper HSK-B80 (Hollow shaft taper according to DIN 69063)

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Godpfxsw Ebn He Agboil Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Giodpfow Si T Aox Agbol Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm Giodpfsx S E Nusx Agbel

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Gedpfxexmt Eqe Agbeil

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · Travel distance X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm Gsdpfex Twccex Agbjil The basic frame structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, making it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the secret to permanent precision and stability. The layout of the machine allows the operator an optimal workflow while requiring minimal floor space. The resulting frame provides a balanced and secure base for the machining unit with outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on prismatically ground guides via recirculating ball carriages. The machining unit, in turn, is mounted to the mobile carrier using prismatic, ground rails and recirculating ball carriages. Description of aggregates and accessories (basic configuration) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill mount: M10 with 11 mm fitting Grooving saw unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Includes: 4 tool holders (right), without collets R8L Tool changer Automatic tool changing system for 8 tools. Moves along with the rear aggregate carrier for quick tool access. · Number of tool slots: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total tool weight: 22 kg · Adapter for 1 angle gearbox · Travels in X direction Horizontal milling unit (position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collet 3–20 mm (ER 32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / 50 mm bore) · Motor power: 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Worktable The worktable is designed to provide the operator with maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of the workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · The retractable reference stops are CNC-controlled · Pendulum operation standard (2 working fields) --- other clamping systems optional --- Axis movement The drive system for X, Y, and Z axes uses ground recirculating ball screws of the highest precision class. The recirculating ball drive...

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds Giodpfx Asx S Etmogbjl - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Gedsw Ea Rgspfx Agboil Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Year of construction: 2013, condition: refurbished (used), functionality: fully functional, This is an SCC 61 combi steamer from the premium manufacturer Rational, electric version. This combi steamer is equipped with a hanging rack for 6 shelves. The unit has been fully overhauled in our in-house workshop and is in full working order. It is offered with a 6-month warranty on all electrical parts. The base stand pictured is not included in the offer, but can be purchased optionally. An invoice with VAT shown separately will be provided. Service: We are happy to assist in arranging a certified Rational service partner. Are you looking for a specific Rational device type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation/removal costs - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional—or your money back - Flexible shipping or collection options - Competent advice—before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Electrical safety check according to DGUV V3 This combi steamer provides space for 6 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), as well as the size of the food, loading quantity, and product-specific requirements. Technical data: - Dimensions (W x D x H): approx. 847 x 776 x 782 mm - Power supply: V: 400 / kW: 11.0 / Hz: 50/60 - Capacity: 6x 1/1 GN - Weight: approx. 103 kg - Serial number: E61SH13042345756 - Year of manufacture: 2013 Gijdpfx Agex S Epnebel Condition: used, fully functional Further information: - With careControl - self-cleaning system - In combi-steamer mode, three operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) - Core temperature probe - Handshower with automatic retract - 8.5" color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free fat separator - Automatic start time preselection - 7 cleaning levels for unattended cleaning—including overnight - Steam injection adjustable in 3 levels—from 30°C to 260°C - 5 programmable proofing stages - USB interface - Seamless, basin-shaped hygienic cooking chamber with rounded corners - Halogen cooking chamber lighting Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to changes and errors. If you have any questions, require advice, or would like to view the equipment locally, you can reach us by phone during our business hours: Monday–Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is carried out exclusively under our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2019, TESA HITE magna : • Electronics completely protected against the ingress of liquids or dust (IP65). • Fixed desk, numerical display 0.001 / 0.005 / 0.01 mm or 0.0001 / 0.0002 / 0.001 in. • High reliability and easy operation when determining external, internal dimensions, depth, height, spacing. • Measurement of diameters, parallelism deviations, perpendicularity deviations. • Patented TESA magnetic measuring system guaranteeing optimal operation in the most difficult workshop conditions. • Zeroing at any location. TESA HITE : Gsdpewcrhfefx Agbjil • Built-in air cushion for sliding. • Measurement of parallelism and perpendicularity deviations. • Patented TESA optoelectronic system. Guarantee of high precision thanks to a durable glass ruler. Application : 1 standard measuring tip, 1 ball measuring tip, hardened steel d. 5 mm, 1 basic device for measurement continuity, 1 6V battery, 1 transformer 100V/250V – 50/60Hz, EU and US power cord. Basic technical data Range (mm) 715 Application expansion (mm) 0-715 Scale (mm) 0.01/0.005/0.001 Accuracy (mm) 0.0001/0.001/0.01 Repeatability

Condition: as good as new (ex-display), Year of construction: 2024, The machine is on display. Optimill F 300 HSC Premium CNC milling machine, direct from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and exceptional service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with recirculating rollers on all axes for high load capacities • High-torque servo drives directly connected to the ball screws on all three axes • Precision-ground, pre-tensioned high-performance ball screws for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm with inline spindle • Massive, highly precise milling table with five T-slots—large dimensions and precision-ground • Portable electronic handwheel with enabling button and emergency-stop key significantly simplifies program setup • Tool changer with arm gripper, 30 tool positions • Coolant system with chip flushing and cleaning gun • 20-bar internal spindle coolant • Belt-type chip conveyor ensures efficient swarf removal • Chip trolley • Oil separator • LED machine light in the working area • SIEMENS extended warranty package and free online/on-site service (OSS Plus) • 1 year Basic maintenance contract included for Germany/Austria/Switzerland • Control System: • 15.6" color display • 16:9 format • Complete Package: • Safety Integrated • Residual material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Additional Siemens OSS PLUS packages: • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 • Technical Features: • Inline spindle • Taper SK 40 / DIN 69871 Gedpsw Ea Ifjfx Agboil • Spindle speed 15,000 rpm • Dimensions & Weight: • Length: approx. 2,856 mm • Width/Depth: approx. 2,300 mm • Height: approx. 2,850 mm • Weight: approx. 6,500 kg • Rapid Traverse Speeds: • X-axis: 36 m/min • Y-axis: 36 m/min • Z-axis: 32 m/min • Electrical Data: • Connection voltage: 400 V • Line frequency: 50 Hz • Power connection: Total connected load 30 kVA • Milling Table (horizontal): • Length: 1,200 mm • Width: 600 mm • T-slot size: 18 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Max. load capacity: 800 kg • Accuracy: • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm • Travel Path: • X-axis (auto): 1,000 mm • Y-axis (auto): 620 mm • Z-axis (auto): 630 mm • Vertical Spindle: • Spindle taper: SK 40 DIN 69871 • Speed range: 15,000 rpm • Main drive motor (S1 continuous): 20 kW • Main drive motor (S6-30% cyclical): 52.4 kW • Motor torque (S1 continuous): 96 Nm • Motor torque (S6-30% cyclical): 250 Nm • Feed Force: • X-axis: 6.68 kN • Y-axis: 6.68 kN • Z-axis: 12.01 kN • Feed Motor Torque (S1 continuous): • X-axis: 20 Nm • Y-axis: 20 Nm • Z-axis: 36 Nm • Tool Changer: • Double arm gripper • Tool positions: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool change time (tool-to-tool): 2.5 sec.

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in showroom condition. Optimill F 200 HSC Premium CNC milling machine direct from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-free machine base Gedpew Ea Avofx Agboil · Linear guideway with roller circulation for high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Massive, precise milling table with five large, precision-ground T-slots · The portable electronic handwheel with enabling button and emergency stop rotary switch significantly simplifies program setup · Coolant system with chip flushing and cleaning gun · Through-spindle coolant supply with 20 bar pressure · Belt-type chip conveyor ensures efficient chip removal · Chip collection trolley · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger for optimal temperature control and prevention of dust ingress · Machine light in the work area · Additional SIEMENS material defect warranty package and free online/on-site OSS Plus service · 1-year Basic maintenance contract included in Germany/Austria/Switzerland Milling spindle: Inline spindle Machine specifications Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Torque drive motor S1: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque drive motor S6-30%: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant system Power of coolant pumps, 3 pcs: 1 kW Flow rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump power: 530 W Milling accuracy Repeat accuracy: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool to tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse X-, Y-, Z-axis: 48 m/min Motor torque X-/ Y- / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed forces X-/ Y- / Z-axis: 5.34 kN / 5.34 kN / 6.68 kN Speed range Spindle speed*: 12,000 rpm Pneumatics Air pressure: 6 – 8 bar Air consumption per hour: 6 – 8 kg/m³ Milling table Spindle – table distance: 100 – 650 mm Table size (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg