Used Barrels for sale (240)

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Pedpfex Sqi Hsx Ahvopp Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Version: CC/W33 -d = Inside: 200 Ppodpfx Ahjb A Imusvep -D = Outside: 310 -B = Width: 82 -No sales by weight/remaining stock

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 240 mm Ppjdsb A Ipmepfx Ahvep -Width: 80 mm -Inner diameter: 110 mm -Weight 17 kg

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Bearing type: Spherical roller bearing Pjdob A Ip Djpfx Ahvspp -Bore: Ø 160 mm -Outer diameter: 340 mm -Width: 114 mm -Weight: 50 kg -No sales by weight

Condition: used, Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm Pjdolw Az Uopfx Ahvspp -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

Condition: used, moving point, moving center point, moving Morse taper, moving -Center point: 60 mm -barrel tip: shaft-mounted -Recording: MK6 -Number: 1x tips available -Price: per piece Pjdpfx Ahsc S D Hzevjpp -Weight: 16 kg

Condition: good (used), revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted Pedpfsrp Ilaex Ahvjpp -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings, thrust bearings, linear ball bearings Pedpfx Asfgyf Ishvopp -Linear ball bearings -Inner diameter: 30 mm -Outer diameter: 47 mm -Length: 68 mm -Price: per piece -Quantity: 117 pieces -Weight: 0.3 kg/piece

Condition: used, live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc. Poded R Smzspfx Ahvspp

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings Ppsdpfx Aheb A Imwevep -Version: cc/w33 -d= Inside: 220 -D = Outside: 340 -B = Width: 90 -Weight: 30 kg

Condition: used, Barrel rack, barrel support, barrel pallet, barrel trolley, barrel tipper -Keg rack: keg pallet for 200 liter kegs -Recording: can be transported with a forklift, see photos -Number: 2x frame available -Price per piece -Dimension: 1300/800/H275 mm Ppsdpfx Aolyvc Ujhvsp -Weight: 25 kg/pc.

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings Ppedpfx Ahjb A Ipzovsp -Outer diameter: 210 mm -Width: 53 mm -Inner diameter: 140 mm -Weight 6.3 kg

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings Ppodpfx Ahjb A Ip Asvsp -Outer diameter: 310 mm -Width: 82 mm -Inner diameter: 200 mm -Weight 22.8 kg

Condition: used, oil hand pump, oil pump, fuel hand pump, hand lever pump, hand pump, oil drum pump, oil drum pump Psdpfxet Rbh Uj Ahvopp -Manufacturer: ABG pumps, hand pump for oil and fuel -Barrel screw connection: M 64 x 4. -Dimensions: 270/60/H290mm -Weight: 1.1 kg

Condition: good (used), moving point, moving center point, moving Morse taper, moving -barrel tip: shaft-mounted Podpfxod R Smne Ahvopp -Recording: MK5 -Dimensions: Ø 70/240 mm -Weight: 3 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Ppodsd R Smuspfx Ahvjp -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/220 mm -Weight: 2.8 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Pjdpfec S D H Aex Ahvepp -Center point: 40 mm -barrel tip: shaft-mounted -Recording: MK5 -Number: 2x tips available -Price: per piece -Weight: 4.7 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Podpfx Ahsc S D H Hevjpp -Center point: 50-85 mm -barrel tip: shaft-mounted -Recording: MK5 -Weight: 5.4 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Ppjdsd R Smxopfx Ahvep -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/242 mm -Weight: 3.9 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Pjdoc Nir Iepfx Ahvopp -Center point: 75/250 mm -barrel tip: shaft-mounted -Recording: MK7 -Weight: 34 kg

Condition: good (used), Year of construction: 2006, 2-component silicone system Swivel arm length: 2200 mm Width: 1180 mm Pjdpfxeycv Sgs Ahvspp Depth: 1000 mm Height: 2450 mm with swivel arm removed Weight with barrel: approx. 450 kg Condition: good, second-hand

Condition: used, Year of construction: 2024, functionality: fully functional, total height: 2,675 mm, table height: 900 mm, total width: 1,075 mm, total length: 1,525 mm, pressing force: 100 t, table width: 700 mm, table length: 500 mm, overall weight: 2,540 kg, reverse speed: 60 mm/s, distance between side stands: 800 mm, stroke length: 250 mm, Equipment: safety light barrier, RIGID FRAME HYDRAULIC PRESSES We have engineered the motorized rigid frame hydraulic presses of the R/NC series in six different capacities ranging from 80 to 500 tons. Specially designed for stamping, die-cutting, and drawing operations. The latest generation R series hydraulic presses have evolved into highly versatile machines, including the capability to integrate seamlessly into automatic production lines. They operate at a hydraulic pressure below 320 BAR to ensure maximum durability of the entire hydraulic system. The R/NC series drawing and stamping presses feature an electro-welded frame made exclusively from S355JR steel, stabilized and precision-machined after welding for perfect parallelism and accuracy. The frame design and strength are optimized using finite element analysis software, ensuring our high standards of precision and quality are always maintained. Both the upper and lower tables are made from precision-machined C45E steel and feature DIN-650 T-slots. The upper table maintains perfect parallelism by means of four lateral cylindrical guides with maintenance-free, anti-friction bimetallic bushings. The double-acting cylinder features a lapped barrel, a chrome-plated piston, and maintenance-free wear guides. Podpfx Ahowlgkmovjpp The hydraulic unit is motorized, offering two speeds with automatic disengagement of the rapid speed, and includes a cylinder decompression valve. Standard features include a SIEMENS SIMATIC S7 1200 safety PLC and a 4” MTP-400 touchscreen positioned above the electric foot pedal control. This setup allows for programming of semi-automatic and automatic operating modes, power, stroke, and dwell time of the upper cylinder. Up to 99 recipes can be stored, with full parameter settings for each recipe. The electrical control panel includes a selector switch for manual/automatic operation, and a key switch for maintenance tasks. All electric and hydraulic controls are redundant and self-monitored, with an additional safety block and safety self-monitoring features. The machine includes verification and certification of correct operation, as well as the safety distance of the light curtains. Safety features include type 4 PLe photoelectric light curtains at the front working area, two fixed side guards, and a rear access guard equipped with a magnetic disconnect sensor, polycarbonate windows, and LED interior lighting. Installation of a hydraulic cushion or ejector is supported. Compliant with all essential CE safety and health requirements. Supplied with an instruction manual. Technical Specifications: - Force: 100 t - Motor power: 13 kW - Working speed: 3–9 mm/s - Approach speed: 40 mm/s - Return speed: 60 mm/s - Maximum pressure: 319 bar (up to 320 bar) - Ram stroke: 250 mm - Guide diameter: 50 mm - Lower table: 700×500 mm - Upper table: 600×450 mm - Max. vertical opening: 500 mm - Front opening: 800 mm - Working height: 900 mm - Overall front width: 1,525 mm - Overall length: 1,075 mm - Overall height: 2,675 mm - Weight: 2,540 kg

Condition: like new (used), functionality: fully functional, pressing force: 400 t, table width: 2,000 mm, table length: 1,000 mm, operating speed: 106 mm/s, reverse speed: 125 mm/s, stroke length: 750 mm, pressing speed: 12 mm/s, Equipment: safety light barrier, HYDRAULIC C-FRAME PRESS FOR RAILWAY RAIL STRAIGHTENING We are offering a new/replica version of this press. The press will be placed on sale by the customer in the second or third quarter of 2026 due to the project's extension. The CF-400E/NC hydraulic press belongs to the CF/NC series and was specifically designed for railway rail straightening. Ppedpjwkv A Nsfx Ahvop Equipped with an upper and lower table made of machined C45E steel with DIN 650 grooves. It uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements according to CE regulations. TECHNICAL DATA Press force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Push plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The gooseneck structure is electro-welded and made entirely of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • The upper table ensures perfect alignment with four 80 mm diameter lateral cylindrical guides equipped with maintenance-free bimetallic bushings. CYLINDERS AND HYDRAULIC GROUP • Single-acting main cylinder with jacketed barrel, chrome-plated piston, and maintenance-free, wear-resistant guides. • Two lateral double-acting cylinders with chrome-plated pistons and wear-resistant guides, enabling fast start-up and return speeds. • Includes two independent hydraulic safety blocks. • Motorized hydraulic group with pre-fill valve for forward and reverse flow. Constant power, variable flow pump. • Equipped with a directional control valve, a pressure relief valve, a decompression valve, and an air-oil cooling system. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 CONFORT, located in the control cabinet. It allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. It has a memory capacity of 300 recipes, with each recipe capable of programming all previous values. • Electrical and hydraulic maneuvers are redundant and self-controlled. It includes an additional safety block and self-checking devices for maneuvers and safety. It includes verification and certification of correct operation and the safety distance for photocells. • Operation is via a low-voltage electric pedal. • For safety, lasers and work area protection with Category IV photoelectric barriers are integrated.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,790 mm, total width: 1,950 mm, total length: 1,240 mm, throat depth: 375 mm, pressing force: 100 t, overall weight: 3,820 kg, reverse speed: 230 mm/s, ram plate width: 650 mm, ram plate length: 450 mm, working height: 850 mm, stroke length: 450 mm, pressure: 290 bar, Equipment: documentation/manual, safety light barrier, Model CF-100/VR + frequency converter, inverter system. We have designed the CF/VR series C-frame motorized hydraulic presses in a range of three different capacities, from 80 to 150 tonnes. Specifically engineered for medium to high volume production processes such as stamping, die-cutting, and deep drawing. The new generation of CF/VR hydraulic presses offers versatile applications, making it possible to integrate these machines into automated production lines. They operate at hydraulic pressures below 290 BAR to ensure increased longevity of the entire hydraulic system. STRUCTURE AND TABLES: The CF/VR series hydraulic C-frame presses feature an electro-welded frame made exclusively of S355JR steel, stabilized and machined after welding to ensure perfect parallelism and high precision. The structure is designed and calculated using finite element analysis (FEA) software, guaranteeing our high standards for precision and quality at all times. Each press is equipped with upper and lower tables made of machined C45E steel, featuring DIN 650 T-slots. The upper table maintains perfect parallelism via four 50 mm diameter lateral cylindrical guides with maintenance-free, anti-friction, bimetallic bushings. CYLINDER AND HYDRAULIC UNIT: The main cylinder is single-acting, with a lapped barrel, chrome-plated piston rod, and maintenance-free wear guides. For rapid approach and return movements, two double-acting lateral cylinders are fitted, also with lapped barrels, chrome-plated rods, and maintenance-free wear guides, enabling fast approach and return speeds. The motorized hydraulic unit includes a prefill valve for approach and return, and a fixed displacement pump for constant-speed operations. The assembly also features a check valve, pressure relief valve, cylinder decompression valve, and air-oil cooling system. ELECTRICAL INSTALLATION AND SAFETY: Standard equipment includes a SIEMENS SIMATRIC S7 1200 series PLC and a 7'' tilting touch screen panel (MPT-700 model), enabling programming of press force, cylinder stroke, and speeds, with storage for up to 300 programs. All electric and hydraulic controls are redundant and self-monitoring. An additional safety block and self-checking devices are installed for operational safety. Includes verification and certification of proper functionality and correct safety distances for photocell protection. Activation is via a low-voltage electric foot pedal. Ppedpowpg Uaefx Ahvep To guarantee safety, the presses feature type 4 PLe safety light curtains at the working area front, two fixed lateral safety guards with polycarbonate windows, and internal LED work lighting. Supplied with operator's manual. Fully complies with all essential health and safety requirements according to CE standards.

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor Ppedpeu Idvwefx Ahvep - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *