Used Barrel Press for sale (12,662)

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Gedjrq D Nispfx Agfsua The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 2017, functionality: fully functional, Eccentric press for sheet metal processing with tools. Godpsytykzefx Agfoua

Year of construction: 2004, condition: used, functionality: limited functionality, Machine for automatic pressing of tube-plate evaporators. Gusdoyt Sqgspfx Agfea

Condition: used, NICO DUIN frame press Gujdeytc Snspfx Agfsa

Condition: used, functionality: fully functional, Flexographic Printing Press FlexiCOLOR 1700/1400 (2 colors), Cooper System – Year 2013 – EXCELLENT condition, preserved Price: 6,000 EUR Location: Ostrava, Czech Republic Year of manufacture: 2013 Condition: Used (briefly in operation), decommissioned long-term – wrapped in anti-corrosion film and stored in a crate Description For sale: FlexiCOLOR 1700/1400 (2-color) flexographic printing machine designed for sheet material printing, ideal for plywood and cardboard. The machine was used only for a short period, then decommissioned, preserved, wrapped in anti-corrosive film, and stored in a shipping crate – suitable for safe transport and storage. The machine is equipped with a Cooper system (quick cliché change and precise registration) and stepless speed adjustment via frequency inverter. It uses water-based inks (ink pan + two-roller system, easy draining and cleaning). Main Advantages - Barely used, then preserved (anti-corrosion foil + crate) - 2 colors, suitable for standard marking/printing of plywood and boards Gsdpfsyghzhjx Agfeua - Cooper system – fast cliché change, stable print registration - Frequency inverter – smooth speed control - Water-based inks – easy operation and maintenance Option for irregular shape printing (independent feeder adjustment / guiding chains) Technical Specifications Model: FlexiCOLOR 1700/1400 Number of colors: 2 Printable media width: 1700 mm Printing cylinder width: 1400 mm Cylinder circumference: 905 mm Max. speed: up to 1800 pcs/h Motor power: 0.75 kW Dimensions (L × W × H): 3700 × 1850 × 1100 mm Weight: 540 kg Application: printing on thick sheets, up to approx. 30 mm thick Delivery / Inspection The machine is available in Ostrava. Delivery includes protective packaging (anti-corrosion film) and crate.

Condition: good (used), Baling press, Schleicher, 16 S – used - : Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg Gsdpfx Agsyzcwhsfoua 380V, 3-phase, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Operating manual not available.

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Godpfx Asyzcvwogfeua Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Location: Husum Operating manual available

Condition: used, Year of construction: 2008, machine/vehicle number: 10322T, functionality: fully functional, pressing force: 120 t, stroke length: 355 mm, table width: 1,560 mm, table length: 3,100 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,080 mm, overall weight: 9,000 kg, Equipment: documentation/manual, We offer this used Interwood HOP veneer press, year of construction 2008. Location: Maryport, Cumbria, UK Gedpey Ah T Rjfx Agfjua 18000GBP (with VAT) 15000GBP exVAT Open to offers 20m cable and distribution box included in price. Type: HOP Serial number: 10322T Year of manufacture: 2008 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm maximum daylight 2200 mm clamping force 300T Gusdpfxerl Irke Agfea table size 2600*1800mm max day light 2200mm clamping force 300T

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. Gujdpjyytuhefx Agfsa - Press beam OK - Block laser OK - Illumination (auto) OK - Line laser Not OK I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: excellent (used), Year of construction: 2001, pressure 100 t Gusdpfx Asucgqwjgfsa table length 2000 mm table width 1580 mm voltage 400 V max. table loading capacity 10.000 / 20.000 kg total power requirement 18 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t d lower table 22t

Condition: used, Year of construction: 2018, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, pressing force: 125 t, table length: 3,200 mm, overall weight: 7,700 kg, We offer the following machine: used Bernardo AKPL 3200X125 press brake, year of manufacture: 2018. Model: AKPL 3200X125 Serial number: W1560277 Nominal pressing force: 1250 kN Working length: 3200 mm Net weight: 7700 kg Voltage/frequency: 400/50 V/Hz Connected load: 8.0 kW Gujdpfey Agmcsx Agfja Current at full load: 12 A Date of manufacture: 2018.07 If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2015, Format: 330 x 482 mm Gsdpfx Aey Aghaogfoua Equipment: The machine is sold with all accessories.

Condition: ready for operation (used), functionality: fully functional, Eccentric press 40 tons Manufacturer: ASILIAN Press Capacity: 40 tons Stroke length: 100 mm Speed: 120 strokes per minute Gsdpfx Agoy Agbgsfoua Motor power: 5,5 kW Table size: 500 x 350 mm Ram: adjustable It is used for metal stamping, blanking, etc

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquette Press! Top condition! Like new! Available immediately! Private sale (no VAT can be declared)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation and offers high energy efficiency as well as a compact design for easy integration into existing plants. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput rate: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil capacity: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm Briquette length is adjustable and can be regulated via the feed auger's speed. Depending on the feed material rate into the pressing chamber, the briquette length will vary. The control is managed by a time relay in the control cabinet, which determines the running time of the feed auger's motor. The machine has seen little use and is in very well-maintained condition. Sale due to underutilization. Trial run on-site possible. Loading on-site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if needed. The integrated hydraulic system is equipped with automatic oil preheating and oil-cooling function. This ensures an optimal temperature range of the hydraulic oil, even at low ambient temperatures or during continuous operation. This allows reliable 24/7 continuous operation of the machine. The price is set fairly considering the condition and very low operating hours. Inspections can be arranged at short notice by appointment. If interested, I look forward to your message. Gedpfsy Af T Iex Agfeua

Condition: new, Year of construction: 2026, control type: CNC control, KBA - Combined CNC-controlled press brake / guillotine shear Super-compact machine with a very small footprint. Maximum cutting length: 3,020 mm or 2,020 mm Rated cutting capacity: 6 mm steel sheet / ST 40 Cutting angle: 1°30″ Backgauge for the shear station – adjustment range: 750 mm Table height: 750 mm Godpey Afxqofx Agfoua Maximum bending length between side frames: 3,550 mm or 2,505 mm Maximum pressing force: 1,000 kN Working height for bending: only 1,230 mm Stroke range (bending station): 175 mm Maximum installation height (bending station): 350 mm Backgauge adjustment range (bending station): 750 mm Dimensions including operator’s pendant: 4.25 or 3.25 m x 1.82 m x H 2.8 m Required floor space: 3.85 or 2.85 x 1.82 m Drive power: 10 kW Weight: 9,000 kg or 7,500 kg Equipment: - CNC control with touchscreen and 10” colour display, graphical user interface, and automatic bending angle calculation - 1 set of press brake tools (bending punch + four-way reversible die) - Sheet metal supports for the press brake station - 90° angle stop for the guillotine shear with 1 m length - Bending station working area safeguarding via light barriers, rear area safeguarded by lateral safety guards and light barriers Optional: - Front bending area guarding by PILZ® camera monitoring - Rotatable angle stop

Condition: excellent (used), Year of construction: 1996, operating hours: 40,000 h, functionality: fully functional, color channels: 5, In production Gujdpfx Ajhtncujgfsa Well maintained machine Stripping unit

Condition: new, Year of construction: 2026, OSTERBERGER HTAP.Servo Brand new 3-axis CNC press brake equipped with CYBELEC CNC control system CybTouch8, featuring automatic bend angle calculation, bend sequence computation, and full-color graphical display. Maximum pressing force: 630 kN Maximum bending length: 2,000 mm / 2,500 mm / 3,200 mm Distance between side frames: 1,580 mm / 2,080 mm / 2,700 mm Throat depth in side frames: 250 mm Ram stroke: 100 mm Maximum installation height: 320 mm Ram travel speeds: - Down: 50/6 mm/sec - Up: 60 mm/sec Table width: 160 mm Oil tank capacity: 120 liters Approximate dimensions: 2.6 / 3.1 / 3.6 m x 1.5 m x height 2.4 m Motor power: 5.5 kW Weight approx.: 4.8 / 5.5 / 6 t Two-axis precision back gauge - Adjustment range: 500 mm - R-axis: 90 mm Back gauge fingers glide on double linear guides Equipment: - Die block - Gooseneck bending punch - Quick-change upper tool system - 2 support arms on linear guides - Bending area lighting Gusdsy Afanspfx Agfsa

Condition: used, color: other, Dimensions (LxBxH): 520 x 150 x 320 cm Year of construction: 1995 Capacity: 200T Table size LxW: 3500x820mm Overall dimensions LxWxH: 5200x1500x3200mm Equipped with: hydraulically adjustable cylinders and table. Online auction of metalworking machines and welding equipment (including SAFAN, DARLEY, SCHIESS, WMW/NILES, ABUS (hall) cranes, VDF, EWM, LINCOLN, FERREX, OP plants and ESAB welding columns, various welding roller stands and welding manipulators PEMA, ADK etc.) from the recent bankruptcy of Bronswerk Heat Transfer BV, the renowned manufacturer of heat exchangers for the oil and gas industry, among others, in Nijkerk, the Netherlands. Gusdpjy Acncsfx Agfsa The online auction opens Thursday 26 March and closes Tuesday 21 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 16 April Pickup days are on: - Wednesday 6 May - Thursday 7 May - Friday 8 May Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 1969, condition: used, Power: 1 kW (2 HP) Dimensions (LxBxH): 260 x 107 x 251 cm Serial number: 682134 Year of construction: 1969 Blade length: 2600mm Strokes per min (no load): 25 - 50 Pressure capacity: 45 tons Stroke length: 50mm Unloading: 175mm Upper blade adjustable: 60mm Engine power: 3 HP Overall dimensions (LxWxH): 2600x1072x2515mm Equipped with documentation Online auction of metalworking machines and welding equipment (including SAFAN, DARLEY, SCHIESS, WMW/NILES, ABUS (hall) cranes, VDF, EWM, LINCOLN, FERREX, OP plants and ESAB welding columns, various welding roller stands and welding manipulators PEMA, ADK etc.) from the recent bankruptcy of Bronswerk Heat Transfer BV, the renowned manufacturer of heat exchangers for the oil and gas industry, among others, in Nijkerk, the Netherlands. The online auction opens Thursday 26 March and closes Tuesday 21 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 16 April Pickup days are on: - Wednesday 6 May - Thursday 7 May - Friday 8 May Guodpfx Agjy Abt Dofsa Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm Guedpfefv Avvjx Agfja weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting Guodpjfv Av Sefx Agfoa • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Gusdpfx Ajfv Awaegfoa Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: new, pressure 26,0 kN Godsfv Avropfx Agfjua stroke 60 mm throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 34,0 kN stroke 40 mm throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum Gsdpfx Aefv Avyogfsua pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.