Used Banding for sale (3,605)

Condition: new, Catalogue No.: HZ014 – Pre-milling – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Fsdpfsza Emhox Abgjph Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Fedpfx Abswka H Segsph Location: Röllbach

Condition: good (used), Year of construction: 1979, Wheel diameter 600 mm Cutting height 395 mm cutting width 585 mm Motor output 2,2 kW Table dimensions 910 mm machine weight ab. 300 kg Fjdozawi Iopfx Abgeph

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Piła Kaltenbach Kaltenbach KBR 371 NA/ABG rocznik 2004 sterowna numerycznie CNC Sterownie: Siemens Piła w pełni automatyczna z podajnikiem materiału dwustanowiskowym. Fpsdpfx Aowqr Ubobgeh Podajnik materiału z magazynem w pełni automatycznym. W pełni sprawna w bardzo dobrej kondycji -serwisowana.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and Fedpfeyvh Nxjx Abgeph piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) NO CE mark, NO CE declaration of conformity

Condition: good (used), For sale is a used AS bandsaw with a cutting width of 435 mm. The saw is in good condition and has been refurbished and inspected by our qualified personnel. Fpjdpfx Aozar Ulebgoh Technical specifications: - Cutting width 345 mm - Cutting height 165 mm - Table size 445 x 350 mm - Dust extraction port Ø 100 mm - Motor power 0.7 kW / 1 hp - Year of manufacture 2016 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! For further information, please call 06244-20299. Related terms: Bandsaw, saws, saw, band Reference: R-P03CW

Condition: like new (used), For sale is a used Record Power bandsaw with a cutting width of 292 mm. Fpodpfszar R Tjx Abgoh The bandsaw is in like-new condition and was used for testing purposes in our workshop. Technical specifications: - Cutting width 292 mm - Cutting height 254 mm - Table size 480x400 mm - Dust extraction port Ø 100 mm - Motor power 1.1 kW / 1.5 HP - Year of manufacture 2025 - Includes fine cutting adjustment - Includes feed mechanism The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Bandsaw, saws, saw, band Reference: R-A0117

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Cutting programs are easy to change Cutting programs can also be divided into groups Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) all parameters can be displayed and changed on their own parameter page or on the main page the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Infeed via proportional valve and hydraulic motor or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Suitable for any trolley size and make Fsdpfjiwaxnex Abgsph For a viewing appointment or further details please contact us by phone.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, operating hours: 429 h, power: 5 kW (6.80 HP), control type: CNC control, total height: 1,570 mm, total length: 1,755 mm, total width: 2,475 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, KASTO TWIN A2 fully automatic bandsaw machine year of manufacture 2011 sawing hours 429 max. round material 260 mm max. 260 x 260 mm min. round material 10 mm shortest remaining piece in single-piece operation 15 mm shortest remaining piece in automatic operation 100 mm max. length of single movement 750 mm max. length of multiple movements 20,000 mm sawing speed, continuously adjustable sawing pressure, continuously adjustable clamping pressure, continuously adjustable Fodezb Dhmspfx Abgjph carbide guides chip conveyor roller conveyor, 4 meters 4x bandsaw blade (3x new) documentation machine is powered on for inspection

Condition: new, Year of construction: 2026, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Fsdpfxsi D Dgwo Abgeph Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: AC, total height: 1,620 mm, total length: 830 mm, total width: 900 mm, overall weight: 110 kg, saw blade diameter: 275 mm, cutting range round steel at 90°: 80 mm, saw drive: 1,500 W, Exhibition machine, like new Fpjdpexrz Ikofx Abgoh Year of manufacture: 2022 - Suitable for steel - Two cutting speeds - Reduction gear, low-noise operation in oil bath - Automatic membrane coolant pump with standard coolant filter - Movable safety guard ensures optimum safety during cutting - Control handle with safety switch - Electrical system in low voltage (24 volts), equipped with emergency stop button, main switch, speed selection switch, and overload protection - Machine head rotatable 45° to both sides - Quick-release vice tiltable 45° to both sides - Quick-release vice with double clamping device ensures precise, burr-free cuts - Quality Made in Europe

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Fpodpfxoxy Tm Ij Abgsh

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Fpsdpfxew D Aybj Abgsh

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Fpedpfow D Aw Hex Abgoh Location: Nattheim

Condition: excellent (used), Welding table for band saw blades up to 400mm width Foded Aruxopfx Abgeph

Condition: used, Twin cutting band saw Raimann B110 duo Roll diameter 1100 mm Roll width 100 mm Fedpfx Abedfc Shegoph Feed rate of 0-40m / min

Year of construction: 2004, condition: used, High - band saw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roll diameter 1250 mm Roll width 150 mm Blade speed: 28-50 m/s Connected load: ca. 45kW Feed rollers 2 x 4 Height 200 mm Cutting height lower edge pressure Guide 400 mm and higher Cutting width 250 mm left of the blade and 250 mm right of the saw blade Fodpsdfcryefx Abgjph with medium cutting device complete technical documentation Follow original photos

Year of construction: 2021, condition: new, Wravor WRC 1050 max.cutting length 6,5m We are also happy to configure a new log band saw according to your wishes. Fodpfxogyw R Se Abgjph

Condition: used, Year of construction: 1989, functionality: fully functional, Kasto HBA 360 AU bandsaw incl. roller conveyor Cutting range: 360 mm Saw blade dimensions: 5334 x 32 mm Length: 2310 mm Width: 2600 mm Height: 1700 mm Fjdpfeyxxfiox Abgsph Weight: 2600 kg We are available for further questions.

Condition: used, Year of construction: 2013, functionality: fully functional, HTZ 1200 SP EXTREME 15 HORIZONTAL LOG BAND SAW for big logs Fedpfx Abjx Adlgogeph • production year 2013 • max. log diameter: 1,5 m • 45 kW main motor with frequency converter • automatic, hydraulic blade tensioning • automatic pre-cutter • automatic board guiding device • max. length of logs 12 m • 8 pcs hydraulic clamp + 1 pc support • 1 pc lifting clamp for taper control • 3 pcs log turning device with left-right positioning • set of longitudinal rollers (3 pcs motorised, 1 pc simple) • automatic control • automatic, lifting belt conveyor for boards • dust extraction device • low working hours

Condition: new, power: 37 kW (50.31 HP), cutting width (max.): 1,200 mm, total height: 3,300 mm, overall weight: 15,000 kg, blade width: 160 mm, saw blade length: 7,750 mm, The PLUS are Mebor’s most advanced horizontal sawmills, with the latest innovations. PLUS band saws bring more production and speed, as well as versatility. The HTZ 1200 PLUS is performing with unmatched productivity in the price range. It is relied on by sawmills on all continents, from soft wood sawmills to quality oriented hardwood sawmills. Key features: • Fast return speed & servo controlled blade positioning, • Fast automatic control preventing operator delays, • High speed hydraulic log manoeuvring functions, • Precision made machine with top quality components. Mebor System® is our own system of horizontal band saws, which sets us apart from our competitors. With a Mebor band saw you will increase your productivity and yield, as well as decrease labour costs. Wood is unpredictable and for this reason Mebor band saws have a strong and robust construction. It guarantees reliability of functioning and minimises maintenance costs. Band saws adapted for your needs – for small and big sawmills.Every Mebor band saw is custom made ; therefore we supply each customer an optimal band saw for his needs. We will advise which model is most suitable for your needs and requirements. We will also adjust the configuration of the band saw; for example the distances between clamps according to the lengths of logs, equipment etc. Automatic board removing (Mebor System® ) We were the first to introduce the board removing system, which saves your time. After the band saw cuts a board, the board pusher pushes it off the band saw bed during the return of the band saw head. Simple and automatic, with no manual work. Fpsdpfx Abericwqegeh Automatic functioning - Mebor System®. It leads the operator during cutting. It provides important information, which helps him choose the optimal cutting for best output. Manual control is also available for less demanding users. Full log manoeuvring equipment is available for fast and effortless work. Precision of cutting is ensured by the solid construction and wide blades. All Mebor band saws are using wide blades (80-210 mm wide). The fact is that wide blades provide higher sawing speed, as well as better sawing precision. The high quality of your products will increase the satisfaction of your customers.

Condition: new, power: 90 kW (122.37 HP), cutting width (max.): 1,100 mm, total height: 4,700 mm, overall weight: 19,000 kg, saw blade length: 10,450 mm, The VTZ PLUS is MEBOR’s exceptionally FAST vertical band sawmill system, designed for high capacity as well as quality-oriented sawing. Its SMART design combines speed, energy efficiency and high recovery of wood. Fodpfxorlm N Uo Abgjph

Condition: new, power: 22 kW (29.91 HP), cutting width (max.): 1,000 mm, total height: 2,210 mm, overall weight: 7,000 kg, saw blade length: 7,200 mm, The HTZ 1100 PRO is a fast, versatile band saw. Suitable for either production or quality oriented sawmills, who are looking at lowering their operation costs, while increasing quality of sawn wood and production. Fjdpfx Asrllansbgjph

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 200 h, cutting height (max.): 300 mm, cutting width (max.): 350 mm, Equipment: CE marking, IMET BS 300 Plus SHI Semi-Automatic Bandsaw For sale: IMET BS 300 Plus SHI semi-automatic bandsaw in excellent working condition. Purchased in Estonia in July 2023. Lightly used. Excellent technical condition. All functions operate correctly. Regularly maintained. Ready for immediate use. Can be inspected and tested on site. The machine has been used in a steel fabrication workshop and has been properly maintained throughout its service life. The reason for sale is the purchase of a larger bandsaw. Cutting capacity at 90°: Round material: up to Ø300 mm Square material: up to 300 × 300 mm Rectangular material: up to 350 × 220 mm Price: €6,500 + VAT Optional roller conveyors available: 8 m infeed roller conveyor 4 m outfeed roller conveyor Fpjdpfx Ajzbyniebgoh Price including roller conveyors: €8,000 + VAT Location: Estonia For further information, photos, or to arrange a viewing, please contact us.

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Fsdpfezafppox Abgeph Total length 4130 mm Feed speed 11 m/min. Weight 1250 kg