Used Band Filter for sale (11,388)

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Gedpezwa Rbofx Ak Ujug Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, controller manufacturer: Heidenhain iTCN 530, workpiece weight (max.): 1,000 kg, table width: 620 mm, table length: 1,350 mm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, tool length: 220 mm, tool diameter: 150 mm, tool weight: 7 g, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Guodoxlrnbspfx Ak Ujg Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Gsdpsh Rit Eefx Ak Uoug Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Year of construction: 1964, condition: used, -WKG 429- We are offering a grinding machine from Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm Grinding wheel Ø: Shrink-fit arbor 475/254 Grinding wheel Ø: Plain arbor 457/357 Weight: 8t Grinding method: Segment grinding Segment grinding heads: 2 pcs Accessories: Dressing device Gjdpfsg Nt Dbsx Ak Uoug Water tank with paper band filter Marposs control

Condition: excellent (used), Year of construction: 1979, Still in very good condition, this bandsaw is made by the renowned manufacturer Hema. Gsdpezz Apnofx Ak Uoug Roll diameter: 800 mm.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, power: 7.3 kW (9.93 HP), input voltage: 400 V, roller diameter: 700 mm, total height: 2,270 mm, total width: 800 mm, overall weight: 500 kg, table height: 900 mm, Equipment: motor brake, robust band saw BSM 700, manufacturer FAMA, year of manufacture 1983, 7.3 kW motor, foot brake, band length 5,150 mm. Godpfjzizu Sox Ak Ueug

Condition: excellent (used), Year of construction: 2016, operating hours: 13,100 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 620, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 3-axis machining center Manufacturer: Spinner Type: VC-450 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 13,100 h Serial number: BV XXXX Technical parameters: ----- • Travel ranges X-Y-Z: 450 x 400 x 400 mm • Work table 770 x 410 mm • Max. workpiece weight: 200 kg • Spindle: 15,000 rpm • Tool magazine: 24 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, ..paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • Chip conveyor • Machine weight: approx. 3.5 t Gujdpozytzfefx Ak Usg • Dimensions: 2,400 x 1,700 x 2,500 mm Accessories: ----- • Documentation

Condition: ready for operation (used), functionality: fully functional, Manufacturer: Cosen Model: NC4038H Gsdpfx Aksz Ap A Dj Uoug Horizontal Dual-Column Band Saw Rectangular Capacity (Height): 401.32 mm Rectangular Capacity (Width): 381 mm

Condition: good (used), Year of construction: 2016, Vertical machining center Machine type: MTCut MVY150H Control: Heidenhain iTNC 530 Year: 2016 Spindle running time: 7.140 h Power on time: 21.774 h new spindle SPECIFICATIONS Travel X-Axis: 1.500 mm Y-Axis: 700 mm Z-Axis: 810 mm Rapid motion: (X/Y/Z): 68 m/min. Max. revolution: 18.000 rpm Torque: 162 Nm Spindle power: 34 kW Tool: HSK 63 Tool capacity: 40 Godpfx Ajzizc Njk Usug Table size: 1.500 x 800 mm Equipment Chip conveyor Air blow Electronical handwheel Chip rinsing pistol Internal cooling: 40 bar paper band filter Caliper: TS460

Condition: like new (used), Year of construction: 2023, operating hours: 9,000 h, functionality: fully functional, Lease return Used for one year 9,000 spindle hours CNC control: CELOS with Siemens 840D sl Operate 21.5" ERGOline control panel with multi-touch screen Motor spindle speedMASTER HSK-A63 20–20,000 rpm, 35 / 25 kW, 130 / 86 Nm (40 / 100% duty cycle) Tool changer: Chain magazine with 60 tool pockets and double gripper Machine weight per machine approx. 9,850 kg Technical Data Working Area Travel (X / Y / Z): 600 / 500 / 500 mm NC rotary swivel table, table size: 600 x 500 mm Swivel range B-axis: -5° to +110° C-axis: 360° continuous Table load: up to 400 kg Spindle and Drive Motor spindle speedMASTER HSK-A63 Speed range: 20–20,000 rpm Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle) Torque: 130 Nm (40% duty cycle), 86 Nm (100% duty cycle) Tool Magazine Chain magazine with 60 tool positions Double gripper for automatic tool change Tool holder: HSK-A63 Cooling and Chip Removal Internal coolant supply through spindle with paper band filter Pressure range approx. 20–80 bar, frequency-controlled Coolant tank approx. 980 l Bed cleaning and extended work area flushing Double cartridge filter, fine filtration 50 µm / 25 µm Coolant temperature control unit, heating and cooling output approx. 4 kW each Scraper-type chip conveyor Coolant spray gun Oil / emulsion mist separator Rotating safety window in operator door Measuring and Monitoring Systems Infrared workpiece probe Renishaw Laser tool measurement system for automatic length and diameter measurement, retractable below table level, incl. calibration tool Software option 3D quickSET for verification and compensation of 5-axis kinematics Sensor package (2022 machine) with i4.0 sensors incl. spindle growth and coolant flow sensors Automation and Options 4-color signal tower Pneumatic actuation for zero-point clamping system EROWA UPC with rotary coupling and two active pneumatic circuits DMG MORI PROFIBUS interface with side loading door for robot connection, dual-channel safety circuits Safety glass in operator door, polycarbonate side windows, automation preparation Electronic handwheel Preparation for DMG MORI NETservice IoTconnector Service Agent and Messenger for remote maintenance and condition monitoring Equipment and Accessories Package DMU 60 eVo basic machines as described Chip conveyors and internal coolant systems on all machines Gusdsx Dq Idepfx Ak Usg Complete CELOS / Siemens 840D sl controls with ERGOline operating panels Workpiece and tool probes (Renishaw / BLUM) on all machines Preparation for zero-point clamping system EROWA UPC on all machines Documentation available in German and English Condition and Inspection All three machines are in very good condition, from a modern manufacturing environment with a high maintenance standard To the best of our knowledge, there are no significant defects or functional limitations A powered, in-operation inspection is possible by appointment

Condition: used, mileage: 14,000 km, power: 140 kW (190.35 HP), color: silver, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Gujdozui Epjpfx Ak Ujg A4M All-wheel drive 4x4 with Torque-on-Demand, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CL1 Steering wheel adjustable in inclination and height, D03 High roof, D50 Full bulkhead, E07 Hill-start assist, E1B Storage compartment for smartphones incl. wireless charging, E1D Digital radio (DAB), E1U USB socket 5 V, E43 Trailer socket 13-pin, E4S Smartphone Integration Package, E7B Navigation preparation, E7M MBUX Multimediasystem, ED1 Fleece battery 12 V 70 Ah, ES0 Jump start assistance Contact, F1K Coat hooks in the driver's cabin, F2W Winter package, F64 Exterior mirrors electrically foldable, F68 Exterior mirrors heated and electrically adjustable, FF5 Storage compartment above the windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the dashboard, FKA VAN, FM3 RAIN WIPER SYSTEM, FU5 Exterior mirrors without indicators, G031 GEARBOX DESIGN 031, G43 9G-TRONIC, H15 Seat heating for front passenger, H16 Seat heating for driver, H1I Wide-angle nozzles in the instrument panel, H21 Heat-reflecting glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IL6 Metallic paint, IR4 Wheelbase 3665 mm, IT4 3.5-tonne vehicle, J10 Speedometer km/h, J55 Seat belt warning system for front passenger seat, J58 Seat belt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB4 Active Lane Keeping Assist, JB6 Park Package with 360° camera, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JI7 Start-up distance, maintenance interval 60,000 km, JK5 Instrument cluster with color display, JS2 Intelligent Speed Assist, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L21 Rear fog light below, L22 Tail lights in partial LED technology, L44 Indicator lights on the front side, L65 Ceiling light(s) in LD/FG area with door contact, L94 Omission of parking lights, LA2 Driving light assistant, LB1 Lateral marker lights, LB5 3rd brake light, LC2 LED light strip in the cargo area, LE1 Adaptive brake light, LG7 LED High Performance headlights, M60 Generator 14 V / 250 A, MI9 Omission of Eco start-stop function, MP6 Engine design Euro VI, MR0 Emission class E (for heavy-duty vehicles), MS1 Cruise control, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, P4F Rating country package Euro-NCAP, Q11 Longitudinal member reinforcement, QA8 Tow hitch for increased trailer load 2.8 t/3.0 t, QA9 Cross member with integrated step, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axle, wireless, RZ2 Wheel manufacturer Magnetto Wheels, S22 Armrest for driver's seat, S23 Front passenger seat, dual-seater, S87 Driver's seat box, low, SA5 Airbag driver, SA6 Airbag front passenger, SB3 Suspension seat comfort version, driver's seat, SK2 Seat occupancy recognition driver's seat, T16 Sliding door right, T75 Grab handles for entry driver and front passenger, T77 Grab handle entry cargo area sliding door on bulkhead, T86 Entry handle on rear corner pillar right, V42 Lashing rails side wall on partition strap, V43 Wooden floor, V52 Wheel arches loadable, V94 Cable duct on side wall, V95 Cable duct on rear portal, VA3 Interior panelling cargo area up to roof height, washable, VF7 Fabric Maturin black W

Condition: used, mileage: 3,000 km, power: 140 kW (190.35 HP), color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request you to schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Gusdpoy T Dz Sofx Ak Ueg A4M All-wheel drive 4x4 with torque-on-demand, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CA3 Active Steering Assist, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, D03 High roof, D50 Continuous partition, E07 Hill start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E30 Battery main switch, single-pole, E3J Pre-installation for switch panel, E43 Trailer socket 13-pole, E4A Antenna interface for radio, navigation and mobile phone, E4S Smartphone integration package, E7B DIGITAL EXTRA: PRE-INSTALLATION FOR NAVIGATION, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, ED5 Parameterizable special module, EK1 Connection strip for electrical connection, ES0 Jump start assist, ET4 Active Distance Assist DISTRONIC, EW6 DIGITAL EXTRA: REMOTE SERVICES PLUS, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2W Winter package, F64 Exterior mirrors, electrically foldable, F68 Exterior mirrors, heated and electrically adjustable, FF5 Storage compartment above windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under cockpit, FM3 WET WIPER SYSTEM, FU5 Exterior mirrors without indicator, FY7 Multi-button remote control, G031 TRANSMISSION VERSION 031, G43 9G-TRONIC, GA7 TRANSMISSION AUTOMATIC TRANSFER TORQUE 700NM, H15 Seat heating for front passenger, H16 Seat heating for driver, H1B Tachograph operation at the front under the headliner, H21 Heat-insulating glass with band filter in the windshield, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, IR4 Wheelbase 3665 mm, IT4 3.5 tonner, J10 Speedometer km/h, J55 Seatbelt warning system for front passenger seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB6 Parking package with 360° camera, JD6 Intelligent tachograph EU, JF1 Rain sensor, JF7 Start-off information assistant, JH3 Communication module (LTE) for digital services, JI7 Starting mileage maintenance interval 60,000 km, JK5 Instrument cluster with color display, JK8 Driver camera, JM2 Extended automatic restart on highways, JM3 Route-based speed adjustment, JM4 Active Speed Limit Assist, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, K31 Noise regulation according to ECE R51-03, K51 Protection against misfueling, KB7 Main tank 93 liters, KL5 Fuel filter with water separator, L13 Fog lights with cornering lights, L21 Rear fog light at the bottom, L22 Tail lights in partial LED technology, L44 FRONT SIDE TURN SIGNAL LIGHTS, L65 Ceiling light(s) LD/FG compartment with door contact, L94 Deletion of parking light, LA2 Driving light assistant, LB1 Lateral marker lights, LB5 3rd brake light, LC2 LED light strip in the cargo compartment, LE1 Adaptive brake light, LG7 LED High Performance headlights, MI9 Deletion of Eco Start-Stop function, MP6 Engine version Euro VI, MR0 Exhaust stage E (for heavy-duty vehicles), MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, P2L Cargo compartment package 2, P47 Mud flaps front, P48 Mud flaps rear, P4F Rating Country Set Euro-NCAP, Q10 Crossmember for trailer coupling, Q11 Longitudinal member reinforcement, RG8 Tires 225/75 R16 C, RM7 Summer tires, RS3 Steel whee

Condition: repair required (used), Year of construction: 2003, operating hours: 24,700 h, functionality: limited functionality, Year of manufacture: 2003 NC rotary table: C-axis, Ø800x620 Swiveling milling head: B-axis, 0-90° Travel: X 1080 Y 710 Z 710 Control system: iTNC530 Internal cooling pressure: 40 bar Internal air blow External cooling Spindle speed: max. 12000 rpm Tool holder: SK40 Tool magazine: 32 positions Measuring probe: Infrared, Heidenhain Electric handwheel: Heidenhain Rotating viewing window: Rotoclear Chip conveyor Godpfxjy Tadvj Ak Uoug Oil mist extraction Coolant system with paper band filter Chip flushing gun Work area light Clamping fixture (next to the rotary table) for longer workpieces The clamping mechanism of the milling head is leaking/defective on this machine.

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Godjzfqf Sspfx Ak Usug Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 SPM – workshop overhauled Mechanically / geometrically and electrically completely overhauled in 2007 Mechanically and geometrically partially overhauled in 2025 and fully functional Wear parts replaced Guodpjwz Hf Nsfx Ak Uog Geometry overhauled according to JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis RSF digital readout - Dressing dimension compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to take your used JUNG grinding machine in part exchange.

Condition: used, Year of construction: 2001, functionality: unexamined, grinding length: 800 mm, grinding width: 600 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, grinding spindle motor power: 20,000 W, Used surface grinding machine and profile grinding machine, year of manufacture 2001, partially overhauled in 2019, ELB-SCHLIFF model PERFEKT-FUTURE BD 8 -F- Schleicher-Unicon CNC Godpjywk Aksfx Ak Usug Electro-magnetic clamping plate 500 x 300 x 4 mm, new pole pitch in 2019 Coolant system featuring combination of permanent magnet and paper band filter Adjustable coolant supply nozzle Grinding wheel flange

Condition: excellent (used), Year of construction: 2012, Equipment: chip conveyor, Spinner U5-1520 5-axis machining center Control system: Heidenhain 620 Year of manufacture: 2012 Table dimensions: 2-part – fixed 920x540 mm / rotary round table 650x500 mm (with enlarging ring) Travel in X-axis: 1,520 mm Travel in Y-axis: 520 mm Travel in Z-axis: 420 mm Spindle mount: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Net weight approx.: 10,000 kg Accessories: Gusdsztv Ihopfx Ak Usg Internal cooling system with paper band filter Chip conveyor Handwheel

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and Godpfx Akjzhma De Usug D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Gujdpfx Akjy Thxzs Uog Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, ESTRELLA DN 1000 GLASS-LINED PRESSURE NUTSCHE FILTER High-quality pharmaceutical/chemical pressure nutsche filter manufactured by Estrella AG, Switzerland. Manufacturer: Estrella AG, Ettingen, Switzerland Year: 1994 Type: Pressure Nutsche Filter / Pressure Filter Diameter: DN 1000 Filter area: approx. 0.75 m² Material: Steel, highly acid-resistant, glass-lined Glass lining quality: ESTRELLA 2000 Godsu U Afuspfx Ak Ujug The unit is equipped with a heavy-duty hydraulic lifting and tilting system for opening the vessel. The hydraulic system is manually operated and integrated into the robust steel frame. Main equipment: - DN 1000 pressure nutsche filter - Approx. 0.75 m² filtration area - Acid-resistant, glass-lined steel construction - ESTRELLA 2000 glass lining - Large, hydraulically lifted and tiltable top cover - Manual hydraulic pump - DN 1000 x 370 top cover - DN 1000 x 550 center section - DN 1000 x 370 bottom section - Filter / perforated plate - 2 x DN 100 connections with sight-glass fittings - 3 x DN 50 connections on top cover - DN 50 bottom connection - Additional fittings and pressure gauge - Heavy-duty steel support frame According to the original manufacturer documentation, the ESTRELLA 2000 glass lining was high-voltage tested for porosity in accordance with DIN ISO 2746. The glass-lined surfaces are visually in very good condition. The blue enamel lining shows a clean and well-preserved appearance. The machine originates from pharmaceutical production. Original Estrella documentation, drawings, and historical manufacturing documents are partially available. Further technical documentation is currently being located and will be supplied if available. The original purchase price in 1994 was CHF 59,218 net, excluding transport and taxes. Inspection of the unit is possible at our warehouse in Switzerland by appointment. CYCRON GmbH Switzerland

Condition: used, mileage: 71,700 km, power: 125 kW (169.95 HP), color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Gusdpfoz Anf Djx Ak Usg A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CB7 Stabilization Level I, CL1 Steering wheel adjustable in inclination and height, CT1 Vibration damper, CW2 Deletion of vehicle lowering, D03 High roof, D50 Continuous bulkhead, E07 Hill start assist, E1D Digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E43 Trailer socket 13-pin, E46 Socket in the cab, E7M MBUX Multimedia System, ED4 Fleece battery 12 V 92 Ah, EE5 Ultracap locking for automatic transmission, ES0 Jump start contact, ES5 Charging package instrument panel, F1K Coat hooks in the cab, F2W Winter package, F64 Exterior mirrors electrically foldable, F68 Exterior mirrors heated and electrically adjustable, FF5 Storage compartment above windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under cockpit, FKA VAN, FM3 WET WIPER SYSTEM, FU5 Exterior mirrors without turn signal, G43 9G-TRONIC, H15 Seat heating for front passenger, H16 Seat heating for driver, H21 Heat-insulating glass with band filter in the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IL5 Left-hand drive, IR6 Wheelbase 4325 mm, Overhang 1615 mm, IT4 3.5-ton vehicle, J10 Speedometer km/h, J55 Seatbelt warning system for front passenger seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JI7 Start-up distance, maintenance interval 60,000 km, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L44 Direction indicator lamps on the front side, L65 Ceiling light(s) LD-/FG-compartment with door contact, L71 Load compartment lighting via motion detector, L94 Deletion of parking lights, LA2 Driving light assistant, LB1 Side marker lights, LB5 3rd brake light, LC2 LED light band in the load compartment, LE1 Adaptive brake light, LG7 LED High Performance headlights, LX5 Europe, M60 Generator 14 V / 250 A, M72 Vehicle compatible with HVO, MJ8 ECO Start-Stop function, MS1 TEMPOMAT, MT5 EMISSIONS CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, P2L Load compartment package 2, Q11 Longitudinal member reinforcement, Q67 Towing eye rear, RY2 Tire pressure monitoring on front and rear axle, wireless, RZ2 Wheels from Magnetto Wheels, S02 Driver's seat, S23 Front passenger seat, two-seater, SA5 Airbag driver, SA6 Airbag front passenger, SK2 Seat occupancy recognition driver's seat, T16 Sliding door right, T75 Grab handles for entry of driver and front passenger, T77 Grab handle for entry of load compartment sliding door on bulkhead, T85 Entry handle on rear corner pillar left, T86 Entry handle on rear corner pillar right, V3L Floor mats all-weather, V42 Lashing rails on side wall at railing, V43 Wooden floor, V52 Wheel arches can be loaded, V94 Cable duct on side wall, V95 Cable duct on rear portal, VA2 Interior paneling of load compartment up to roof height (wood), VC4 Lashing rails on side wall on roof frame, VF7 Fabric Maturin black, VV2 Cargo securing rail system, W54 Rear doors, double-wing, opening to side

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: API629410, Technical characteristics: Core Specifications Attribute Value Motor Power: 55 kW (75 hp) Maximum Working Pressure: 7.5 bar Free Air Delivery (FAD): approx. 174.4 l/s (approx. 369 CFM) Cooling Type: Air-cooled Noise Level: approx. 67 dB(A) Guedpoyam Nqefx Ak Uog Drive Type: Gear-driven Integrated Dryer: Yes (Full Feature “FF” version) Electrical Supply: 400V / 50Hz Regulation System: Full load / no load with Elektronikon® controller Dimensions (L×W×H): approx. 1656 × 1100 × 1968 mm Weight: approx. 1100 kg Design & Features: - Sound-attenuating enclosure: Steel canopy with flame-retardant insulation for quiet operation. - Elektronikon® Controller: 3.5” color display with programmable pressure bands, remote monitoring, and auto-restart capability. - Zero-loss condensate drain: Integrated into the dryer for efficient moisture removal without wasting compressed air. - Integrated moisture separator: Labyrinth-style, built into the aftercooler for enhanced air quality. - IP55-rated motor: Dust and water-resistant, suitable for industrial environments. Reliability & Maintenance: - Synthetic oil: Rated for 8,000-hour change intervals. - Spin-on oil filter: With integrated bypass valve for easy servicing. - ASME-approved air/oil separator: For long service life and minimal oil carryover. Machine status: WORKING

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 820 mm, total width: 1,010 mm, total height: 2,030 mm, For sale is a bandsaw from C.E. Reich. Type: Industrie 500 Year of manufacture: 2018 Saw band dimensions: 3800 mm x 16 mm Band speed: 30 m/sec. The Reich Industrie 500 bandsaw is a bandsaw with a fixed, welded table, portion stop, material pusher, and sliding table, suitable for cutting food products such as meat, bones, sausage, cheese, or fish. The food products can be processed fresh or frozen. Gsdpfx Aoz Aibtsk Ujug

Condition: excellent (used), Year of construction: 2012, Data: Ibarmia gantry-type machining center (3 axes) XYZ travel: 3050 x 600 x 900 mm Spindle speed: 12,000 rpm Tool magazine: 60 positions, HSK 63 High-pressure coolant: 60 bar Gjdpfx Akoywz H Hj Usug Tool measurement: Renishaw Touch probe: Renishaw Coolant system / band filter Chip conveyor

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 8398, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 2,500 mm, actuation type: mechanical, total height: 2,200 mm, total length: 3,800 mm, total width: 2,000 mm, Equipment: CE marking, documentation/manual, Löser external cylindrical grinding machine for grinding the outer circumference of pipes 1.3. Technical data Dimensions: Width approx. 3.8 m | Height approx. 2.2 m | Depth approx. 2.0 m Power supply Electrical connection: 3 x 400 V AC | 50 Hz Total power: 15 kW Fuse: 32 A Pneumatic connection Main supply: 6 bar | approx. 5 m3/h Supply for air nozzles: 6 bar | approx. 30 m3/h Workpieces that can be processed Pipes made of steel or stainless steel with the following dimensions: Length: from 10 mm to 100 mm Diameter: from 50 mm to 1000 mm Grinding station type L Number of grinding stations: 1 Grinding mode: Wet machining Grinding technology: Grinding with a grinding belt and contact wheel | Grinding with a grinding wheel Cutting speed: continuously adjustable | max. 30 m/s Power: 7.5 kW per station Current consumption: maximum 14 amps per station Dimensions of grinding belt: Width 150 mm | Length 2,500 mm Dimensions of contact wheel: Width 150 mm | Diameter 400 mm Dimensions of grinding wheel: Width 150 mm | Diameter 400 mm Belt tension: Pneumatic | manually adjustable Station positioning: Manual Workpiece transport Workpiece support: V-groove | Angle 120° Height adjustment of V-groove: Manual Gedpfxjzvn Urj Ak Usug Feed devices: 1 Positioning of feed device: Manual Feed speed: approx. 1 m/min to 10 m/min; depending on the workpiece diameter Coolant management The machine is prepared for wet machining. A Stevens paper band filter, type PF 120, machine no. 322177, is included in the scope of supply.