Used Bale for sale (394)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Valmet RoboCoiler for automatic de-wiring of bales. There are 2 units. Each unit consist of a turntable, metal detection, cutting and spooling unit. CHARACTERISTICS Kodpfozy Nlasx Albjnc ▪ Max. 140 balen/hr ▪ Bale length: 700 – 1000mm ▪ Bale width: 580 – 900mm ▪ Bale height: 350 – 650mm ▪ Bale weight: max. 333kg ▪ Wire diameter: 1.8 – 3.0mm ▪ Strength: 500 – 1250 N/mm2

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Knodpeznm H Djfx Albjc

Condition: good (used), Year of construction: 2008, operating hours: 40,781 h, functionality: fully functional, pressing force: 56 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, type of input current: three-phase, input voltage: 400 V, overall weight: 16,000 kg, power: 22 kW (29.91 HP), input frequency: 50 Hz, Horizontal full automatc press, with conveyor Knedpfjz Tftfox Albec

Condition: ready for operation (used), Bramidan 4-0F Engine: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 cm Bale weight: 200-250 kg Pressure: 18 tons Weight: 1580 This machine is used to reduce the volume of waste materials such as film, paper, etc. Price: 4800 EUR Aventek MK 2500 baler This is an industrial baler for compressing waste materials such as: Kjdpfx Aov Ai Uqjlbsnc film cardboard/paper plastics Pressing force: 25 tons Bale weight: 400 kg, depending on the material Bale dimensions: approx. 1200 × 800 × 800 mm Cycle time: approx. 50 s Power supply: 400 V Engine power: approx. 5.5 kW Year: 2013 Price: 6500 EUR ORWAK 9020 baler: - 2.2 kW engine - 380V - 20 tons pressure - bale dimension 1100x700x800 - bale weight: depends on the raw material, 200-300 kg Price: 5500 EUR

Condition: ready for operation (used), The DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of volume of residual materials (suitable for recycling) in industry and crafts: Cardboard boxes Foam PET bottles Insulation mats and other compressible materials. Horizontal baler, waste press DIXI 60 SLD with ejector Technical specifications: Pressing force: 60 tons, Unit pressure: 6.81 kg/cm², Power supply: 400V / 7.5kW Bale dimensions: 800x1100x1200 mm, Number of ties: 3 Bale weight: approx. 370-410 kg, Tying: manual Loading aperture: 990 x 1110 mm, Machine weight: 5420 kg Average pressing cycle: 47 seconds Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Infeed opening (width x height): 1040 x 1110 mm Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size (width x height x length): 1120 x 1120 x 1200 mm Bale weight: Depending on the material, approx. 500–600 kg Bale tying: 3-fold, manual Machine dimensions: Length: 4200 mm (+cage 1600 mm) Width: 1830 mm Height: 2620 mm Machine weight: approx. 8000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used Kodsra A E Uopfx Albonc Price: 14,000 EUR

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 113889, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg Knsdpfxewnpx Ej Albsc External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales/hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation location: indoors / outdoors under cover Serial number: 113889 Year of construction: 2012 We point out the respective original documentation, which can be obtained directly from the manufacturer.

Condition: ready for operation (used), Crushing force: approx. 700 kN (approx. 70 tons) Engine power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Weight of one bale: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Knodpfx Alera Dddjbsc Design features large loading opening for cardboard option for automatic feeding (e.g., with a conveyor) manual wire tying (4 wires) pallet lock and hydraulic door for bale removal Advantages of this press large bales – fewer transports high crushing force designed for continuous operation Available model years: 2017-2020

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Ksdpfoz Aaggox Albjnc Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 1,400 kg, Bale clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 2A (41 cm) Capacity 1400 kg Opening range 565-1900 mm Width 1050 mm Clamps 770 mm ID OS2112 Kodpfx Aloz Nt Uisbonc

Condition: used, Year of construction: 2018, Bale press and performance data Kjdpfxjzxzw Ej Albjnc Pressing force: 480 kN Specific pressing force: 58 N/cm² Drive power (motor): 11 kW Voltage/frequency: 400 V / 50 Hz (three-phase) Cycle time in idle mode: 35 seconds Theoretical throughput in idle mode: 32.81 m³/h [1] Bale and loading dimensions Maximum bale weight: up to 420–430 kg (depending on material and density) Bale dimensions (L x W x H): 1200 x 1100 x 750 mm Feed opening (W x L): 1020 x 900 mm (ideal for large boxes) Binding method: manual, with 4-fold wire wrapping Net weight of the machine: 5900 kg (5.9 tons)

Condition: good (used), Bramidan MC16 baler for waste paper Machine in perfect condition, like new. Purchased from storage; practically unused. Ideal for baling paper, waste paper, PET, plastic film, clothing, general waste, etc. Description: – Compact design, requiring minimal workspace – Bale weight: 250 kg – Large top-loading opening for waste – Two-chamber system Kedsz S Unijpfx Albsnc – Intuitive control panel – Automatic piston return after the compression cycle – Maintenance-free hydraulic system – Easy bale removal thanks to an integrated ejection system – Bale-tying system Power supply: 380V, 50 Hz Pressing force: 16t Max. bale dimensions: 1100 x 800 x 700 mm External dimensions: 2540 x 1210 x 2570 mm Power: 4 kW Weight: 1220 kg Made in Denmark.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 112010, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works, and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation site: indoor / covered outdoor Serial number: 112010 Year of manufacture: 2011 Kedpfx Alewnpyvsbonc We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: used, functionality: fully functional, Year of construction: 2014, total length: 1,500 mm, load capacity: 2,500 kg, empty load weight: 1,227 kg, construction width: 1,130 mm, opening width: 1,860 mm, Cellulose/Bale clamp Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Technical condition: very good Description: Rotation range 360°. Opening range 560-1860 mm. Arm height 900 mm. Arm length 1150 mm. Kjdpjz Svv Iofx Albsnc

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Knodpfxoy D Dr Sj Alboc Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment Kjdpfexdnn Iex Albjnc The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, functionality: fully functional, Channel baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer Paal Type Konti 325 G Year of manufacture 2013 Operating hours 12,110 Pressing force 100 t Drive power 2 x 55 kW Feed opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Tying 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Knodpfx Aljz A T N Eoboc Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS, PAPER PRESS, FOIL PRESS, BALING PRESS Immediately ready for use, good condition Used & good / see photos Model: HSM 500.1 VL Machine No. 6135.244.P Serial No. 220109689 Pressing force 50 tons V 400; Hz 50 kW 7.5 Amps 15.5 Pressing power 6 tons Year of manufacture 2001 More presses in our other offers Item used and good / roughly cleaned (Plug it in and you're ready to go) Dimensions: On request!! Additional photos show further possible uses. All items shown in the photos are also available from us. Price quoted net per piece upon collection from warehouse 47441 Moers Current stock: 1 piece Inspection is expressly offered. More equipment in stock see photos or inquire by phone General: We are offering articles from various acquisitions, which we describe as well as possible and provide informative photos. No further information can be provided about the item. Knjdslc Du Nspfx Albsc We offer the possibility of inspection on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone appointment. If required, the item can be taken away immediately. Due to time constraints, we can only answer questions about this item if you provide us with a telephone number in your inquiry. Unless explicitly stated, this offer is for USED GOODS. Any packaging may be damaged. Items have been visually inspected and are technically in order as far as possible. All offers are ex warehouse 47441 Moers. If you would like shipping, please contact us to discuss packaging and shipping costs. If you are interested, please do not hesitate to call us. All dimensions are approximate. Errors and omissions in the description are expressly reserved.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Kodpoz H I E Aefx Albenc Oil filter changed Vertical tying system overhauled and made operational. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: used, Year of construction: 2012, functionality: fully functional, Strautmann baling press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of manufacture: 2012 Pressing force 60 t Total connection power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Binding: 4-way vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Kodpfxjz A T U Uj Albenc Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. Kedpfx Aleyim Ayjbjnc * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: good (used), Year of construction: 2011, operating hours: 23,130 h, functionality: fully functional, Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: 23,130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. Knodpsz I Ra Esfx Albec The sale is made with advance payment, ex works, without warranty.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material Kedpoygud Aofx Albsnc The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter Kjdsyyy Dpjpfx Albonc - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: good (used), Year of construction: 2000, pressing force: 80 t, bale width: 1,100 mm, bale height: 720 mm, noise level: 85 dB, oil tank capacity: 900 l, empty load weight: 24,000 kg, operating pressure: 250 bar, For sale: a Bollegraaf 80A baling press from the year 2000, including a feed conveyor. The machine is in working condition and is still in use. The machine can be inspected by appointment. The machine is equipped with a pre-compression flap, cross-tying with horizontal wires, and is powered by a 45 kW main pump. The feed conveyor has a working width of 1500 mm. Knjdpfxez Sza Ee Albjc

Condition: used, functionality: fully functional, load capacity: 7,000 kg, Bale clamp Knjdpfxjzz Ea As Albjc ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 4A (61 cm) Capacity 7000 kg Opening range 675-3320 mm Width 2250 mm Clamps 1800 mm ID OS2092