Used Bale Wrapper for sale (785)

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Bwedpsx Ta R Nofx Abbeh Illustration similar

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Bjdpfxox Ta Nxe Abbswh Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Condition: reconditioned (used), bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 380 kg, Press in perfect condition after overhaul, unused. Serviced exclusively by the manufacturer. Perfect condition. Fully automatic operation. Adjustable bale length: 600–1200 mm. Bale weight approx. 380 kg. Bwjdpfxsx S Sbdo Abbjh

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of production: 1994 Maximum capacity: 25,000 kg/h Bale outlet dimensions: 77 cm x 52 cm Bwedpfxet Ucqfs Abboh The baler is operational - it worked until the production line was extinguished. Recently there was a problem with automatic binding.

Year of construction: 2022, condition: ready for operation (used), A pallet wrapper with shrink hood OK-Pack is available. Pallet dimensions X/Y/Z: 1200mm/800mm/2000mm, max. pallet weight: 1500kg, machine dimensions X/Y/Z: approx. 2700mm/1800mm/2600mm, control system: Siemens PLC S7-1200/214C-KP300. Documentation available. An on-site inspection is possible. Bjdpfsx Srpnjx Abbjwh

Condition: excellent (used), functionality: fully functional, filling opening width: 1,600 mm, filling opening length: 2,200 mm, bale width: 400 mm, bale height: 400 mm, total width: 3,345 mm, total height: 3,160 mm, total length: 7,440 mm, input voltage: 380 V, overall weight: 28,000 kg, power: 55 kW (74.78 HP), Equipment: documentation/manual, Baler 400 x 400 mm. Very good condition. Well maintained. Bodpfsxcazwox Abbowh

Condition: used, Year of construction: 2016, Compressed air | Krone Comprima 150 CV XC Year of manufacture: 2016 Approx. 27,500 bales pressed All chains replaced in 2023 Wrapping table Control unit Complete knife set Bedpfxox R N R Hs Abbjwh Roller hold-down Air brake | Internal No.: 11349362

Condition: good (used), functionality: fully functional, For sale is a Siat brand pallet wrapper / stretch film machine. Bwedpfx Aew Eu Iasbbeh The unit was fully functional when it was dismantled and stored for transport. After reassembly and connection, it is immediately ready for operation. Turntable diameter: 150 cm Drive-on ramp Rail-guided film carriage Transport and loading can be organized across Europe for an additional charge, if desired. All prices are plus VAT. Inspection by appointment is possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your operation? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II with hopper, year of manufacture 1979 Technical Data: Manufacturer: Paal Model: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Bwsdpex Irvaofx Abbsh Channel cross-section: 700 x 1000 mm Feed opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale dimensions: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials processed: Paper, Cardboard, Film Remarks: The machine is in fully functional condition. It was inspected and tested at our site in 28816 Stuhr. Video footage is available on our website or YouTube channel. Inspection, including powered operation, is possible at any time by appointment. Upon request, we can also carry out tests using your material for a handling fee. If you have questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer information. We accept no liability for the information provided or for possible errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Year of construction: 2023, condition: new, functionality: fully functional, Stretch wrapper type MP-206 Compact, semi-automatic stretch wrapper with modern PLC control incl. color soft-touch display and film pre-stretching. EU Declaration of Conformity.mechanical engineering in accordance with the current Machinery Directive 2006/42/EC (valid since 29.12.2009) Details and technical data Machine dimensions - Length 2,500 mm - Width 1,500 mm - Turntable diameter 1,500 mm - Turntable height 70 mm - Machine weight 600 kg - Column height 2,580 mm - Max. Pallet height 2,400 mm - Max. Pallet weight 2,000 kg - Voltage 230V, 1Ph+N+PE, 50Hz, 16A Technical equipment - Electronically controlled soft start of the turntable - Uncomplicated, quick change of the stretch film roll - Adjustment of the film pre-tension by exchanging gear sets (150%, 200%, 300%) - Photocell for automatic height detection - Turntable speed infinitely variable between 0-15 rpm - Intuitive control via color soft-touch display Control panel with Bsdpfsuufh Hsx Abbjwh 1) Colored soft touch display 2) Winding start button 3) Emergency stop switch 4) Main switch Setting options on the display - Adjustable number of foot windings - Adjustable number of main windings - Adjustable number of head windings - Special function for attaching cover foils

Condition: used, Year of construction: 2008, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Bedpfx Ajx H Thzobbjwh Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process.

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 2,800 kg, Cellulose/Bale Clamp Load centre: 750 ISO class: ISO class 3 = 2,500 - 4,999 kg Bodpfxex Rabvo Abbewh Condition: Ready for use and fully functional Technical condition: good Description: Year 2011 ISO 3A (51 cm) Capacity 2,800 kg Sideshift Opening range 625-2,380 mm Width 1,450 mm Clamps 1,500 mm ID OS1802

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2012 Bwsdpfx Aex H R U Sjbboh Pressing force: 40 t

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,000 kg, Bale clamp Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Bwedpfx Aex N Dp Usbbjh Technical condition: good Description: Year 2018 ISO 2A (41 cm) Sideshift valve Capacity 2,000 kg Opening range 540-1,800 mm Width 1,020 mm Clamps 770 mm ID OS1751

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,000 kg, Bale clamp Load centre: 500 Bodpfxsx N Dp Is Abbewh ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully operational Technical condition: Good Description: Year 2018 ISO 2A (41 cm) Sideshift valve Capacity 2,000 kg Opening range 540-1,800 mm Width 1,020 mm Clamps 770 mm ID OS1750

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,400 kg, empty load weight: 390 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Bsdsx Efg Ropfx Abbjwh Mast Type: None Technical Condition: Very good Description: Model 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1675 mm, arm height 440 mm, arm length 1,000 mm, arm smooth on the outside, inside fitted with round bar, arm tips bevelled, load capacity 1,400 kg at 500 mm load center, front dimension 158 mm, center of gravity at 289 mm, weight approx. 390 kg, includes pressure gauge, ISO - Class 2 A connection.

Condition: ready for operation (used), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Loading aperture (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 Plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860, brand new, ex-display, year 2020, price: €13,000 Bale binding: 4-fold wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling aperture (mm): 1200 x 565 Cycle time (seconds): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Filling opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bwjdpfxera Rbge Abbjh Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Suitable materials: foil, cardboard Idle cycle time: 25 s

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Palletizer and wrapper in a Comi machine for sale. The machine is currently operating flawlessly in a potato packing facility. It will be available from July 2026. Bwsdpfxsx Nh Tqe Abboh

Condition: used, Year of construction: 2015, load capacity: 2,500 kg, Bale clamp Bwedpeu D Ra Iofx Abbsh Load center: 800 ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Description: 3 more bale clamps in stock (8860, 8859, 8858)

Condition: excellent (used), Ilapak inverted flow wrapper. In lovely condition direct from UK vegetable pack house. Bedpox Ddm Hjfx Abbowh

Condition: good (used), Ulma Atlanta flow wrapper from vegetable factory. Bwodpfxsx Awxyj Abbsh

Condition: excellent (used), Year of construction: 2021, operating hours: 80 h, functionality: fully functional, Almost as new carton collator wrapper. Bought for a project to wrap large pizza cartons in stacks, currently set for packs of five or six. Only used for a few weeks due to contract change. Bodpfxjx Alcgo Abbswh

Condition: used, Year of construction: 2013, operating hours: 80,000 h, functionality: fully functional, machine/vehicle number: 65/2013, type of input current: AC, input voltage: 400 V, overall weight: 2,000 kg, total length: 3,200 mm, total height: 2,500 mm, total width: 3,200 mm, Horizontal foil wrapping machine Bwedpfewayuhjx Abbeh pallets - 2060mm long x 900mm width x 992mm height efficiency - 33 pallets / hour

Condition: used, Year of construction: 2012, operating hours: 31,000 h, functionality: fully functional, pressing force: 90 t, filling opening width: 940 mm, filling opening length: 1,600 mm, bale width: 1,000 mm, bale height: 800 mm, total width: 5,800 mm, total height: 5,680 mm, total length: 9,050 mm, overall weight: 16,500 kg, power: 53 kW (72.06 HP), volume flow: 190 m³/h, tank capacity: 1,500 l, Equipment: documentation/manual, The baler has been in operation since 2012 and has been primarily used for compressing paper materials, which make up approximately 85% of the total volume processed. The remaining materials include film/nylon and a small percentage of plastics. The machine has undergone regular maintenance and remains fully functional to this day. It continues to serve as our main baler in daily operations. Operating Schedule: 5 days per week, 8 hours per day Throughput: Approximately 50 tons per day In 2023, we replaced the carriage plate wheels and bearings. The pump for the pressing channel is new. The machine operates under excellent pressure conditions; we consistently achieve container loads of 25 tons of compacted cartons. The tying system is fully functional and performs reliably using a 4-wire configuration. The main cylinder piston was recently replaced with a new one, installed by local technicians. Bwedpfxex H Rmbe Abboh Minor modifications have been made to the tying system and the spring system that prevents material expansion back into the carriage plate area. These changes are The channel is in good operational condition. Recently, the old floor was removed due to wear, and we applied a filler compound (similar to concrete) to smooth out irregularities and prepare the base for a new floor installation. This work ensures proper alignment and durability moving forward. The conveyor is in working order, with visible signs of wear on the side panels. These are cosmetic and clearly visible in the photos included in this report

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment Bwodpfx Ash Dy Rfebboh