Used Bale Shredder for sale (1,471)

Condition: used, machine/vehicle number: 13385, Rotor diameter: 370 mm Rotor width: 1400 mm Rotor knives: 80 Dodpfjxfwvwjx Aduowc Stator knives: 1 row Feed opening approx. 1419 x 1900 mm Drive motor: 45 kW

Condition: excellent (used), functionality: fully functional, Catalogue number 7673 TECHNICAL DATA - top feed hopper inlet: 800x1050mm - outlet for shredded wood: Ø 150mm - rotor working width: 800mm - main motor: 18.5kW - number of knives: 19 pcs - knife dimension: 30x30mm - screen: 24mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1600x1800mm - weight: approx. 1800kg ADVANTAGES – German manufacture – autoreverse – pressure drawer – very good condition – used shredder Net price: 57,900 PLN Net price: 13,620 EUR (depending on a rate of 4.25 EUR) Dwodpfxswrrhde Aduoc (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Dwjdpfx Aou Thabsduoc Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E Dsdpfxexfrvfo Adujwc 2 x 110 kW with outlet conveyor and magnet

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,500 kg, empty load weight: 1,227 kg, total length: 1,500 mm, construction width: 1,130 mm, opening width: 1,860 mm, Cellulose/bale clamp Dodpfxou D S Tio Aduewc Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Description: Rotation range 360° Opening range 560-1860 Arm height 900mm Arm length 1150mm

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,480 h, functionality: fully functional, Shredder – REINBOLD RMZ 500 year of manufacture 2008 machine compliant with CE standards Dwodpfoxg Hrwox Aduec operating hours: 1480 2 motors of 11 kW (15 hp) each maximum throughput 850 kg/hour top feed opening 1220×1020 mm bottom discharge opening 562×462 mm knife diameter 235 mm user manual + CE certificate + electrical diagram operation tested before disassembly (video available upon request via Whatsapp) transport dimensions 1500x1300x2100h mm weight 1500 kg

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - loading hopper inlet 280x300mm - outlet for shredded wood fi 310mm - working width of the rotor 340mm - main engine 22kW - number of knives 6pcs - dimensions length/width/height 1300x1150x1680mm - weight 720kg ADVANTAGES - very good condition - used chipper Dwodpeignt Usfx Adusc Net price: PLN 19,900 Net price: EUR 4,680 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Dsdpfsu Tha Iox Adujwc Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet fully overhauled new couling unit READY FOR DISPATCH Dedpfxexfrunj Aduswc

Condition: excellent (used), CATALOGUE NUMBER 6955 TECHNICAL DATA - loading hopper inlet length x width 1070x710mm - outlet for shredded wood fi 200mm - working width of the rotor 700mm - main engine 18.5kW - pump engine 1.5kW - number of knives 21pcs - knife dimensions 35x35mm - sieve 50mm - pressure drawer - electric auto reverse - dimensions length/width/height 1700x1300x1640mm - weight 1780kg ADVANTAGES - German production - auto reverse - pressure drawer - very good condition - used chipper Net price: PLN 67900 Net price: EUR 15950 Net price calculated according to the exchange rate 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change) Djdpfjlnkb Nex Aduswc

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Dodpfxou Tg I Ds Aduewc Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: refurbished (used), operating hours: 8,000 h, FULLY OVERHAULED-----READY TO WORK, HAMMEL 750 E Dedjxfrr Hjpfx Adujwc - Power 2 x 110 kW electric - with long discharge conveyor The following work has been done: - 2 pieces hydraulic motors were overhauled - 2 pieces hydraulic pumps were overhauled - new cooler fan installed - neu rubber belt for the conveyor installed - new drive drum for the conveyor installed - Service done with oil change The machine can be seen in working condition on our site at D-59329 Wadersloh.

Condition: excellent (used), CATALOGUE NUMBER 6631 TECHNICAL DATA - loading hopper inlet 285x305mm - engine 7.35kW - number of knives 3pcs + 2 counter knives - knife dimensions 300x75mm - sieve (2 types) 10mm, 8mm - diameter of the exhaust port 100mm - dimensions length/width/height 1070x900x1980mm - weight 613kg Dedjibau Tjpfx Aduswc ADVANTAGES - Swedish production - additional sieve - very good condition - used chipper Net price: PLN 22900 Net price: EUR 5380 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Dwsdpfxou Thx Re Aduoc Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 2006, SHREDDER TYRANNOSAURUS 9904 IN IN GOOD CONDITION FOR SALE. THE BIGGEST SINGLE-SHAFT-WASTE-SHREDDER OF THE WORLD. WEIGHT APPROX. 70 TONS. Technical Data: REXROTH-hydraulics power pack: 525 kW two hydraulic motors are installed at both ends of the rotor Rotor Diameter 1 000 mm Rotor Length 3 200 mm Rotor Knives 139 pieces, turnable fur multiple use Counter nnife cassettes 4 pieces, working separately Counter knives 24 pieces, turnable fur multiple use Screen 4 segments, opening separately when foreign pieces coming in the machine Hydraulic pusher Dodpfx Adoxfrraeujwc Dimensions of the machine: - Length 6 550 mm - Width 6 800 mm - Height 3 610 mm Total weight approx. 70 tons This advertisement is showing photos of the machine as it is and example picture for illustration purpose. The machine is dismantled on stock. More information could be send on request.

Condition: excellent (used), Catalog number 7259 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 530mm - shaft diameter 550mm - knife length 530mm - number of knives 2pcs - sieve dimensions 50x50mm - 2 toothed pulling shafts from the bottom - lower shaft motor 2.2kW - toothed pulling shaft from the top - upper shaft motor 2.2kW - belt feeder 0.55kW - feed belt length 3000mm - feed belt width 410mm - main motor 45kW - auto reverse - reverse gear - machine dimensions L/W/H 2900x1600x1600mm - feeder dimensions L/W/H 3070x720x670mm - weight about 3500kg ADVANTAGES - German production - auto reverse (adjustable) - reverse gear - used chipper, very good condition Dwedpfx Asrit Nleduoc Net price: PLN 85,900 Net price: EUR 20,200 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: reconditioned (used), Year of construction: 1997, operating hours: 6,429 h, JENZ AZ 50 Dwedpfx Adexfrq Njuoc The machine is partially refurbished and offered at an attractive price. The engine and rotor are running perfectly. Videos can be provided upon request. Full documentation is available. The following work has already been carried out: - Panels overhauled and newly painted - Minor welding work - Water cooler replaced The following work still needs to be completed: - Remaining welding work - Welding the exhaust line - New bearings for the plate conveyor - Painting of machine chassis - Complete assembly - Checking the radio remote control

Condition: excellent (used), CATALOG NUMBER 7611 Technical data: - inlet dimensions 460x180mm - outlet diameter 300mm - shaft width 550mm - shaft diameter 350mm - number of knives 10pcs - knives set in 2 rows - auto reverse - knife setting device - sieve diameter 30mm - caterpillar from above and below - pulling shaft from below - feed caterpillar length 4400mm - main engine 37kW - upper feed motor 1.5kW - lower feed motor 2.2kW - dimensions length/width/height 6100x1150x1000mm - weight about 3500kg ADVANTAGES - German production - auto reverse - caterpillar with top and bottom Dedpfxjv Ublfj Aduswc - knife setting device - very good condition - used chipper Net price: PLN 98,900 Net price: EUR 23,250 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet Dedpfjxfrplox Aduowc fully overhauled new couling unit READY FOR DISPATCH

Condition: excellent (used), CATALOGUE NUMBER 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for shredded wood fi 160mm - working width of the rotor 590mm - main engine 18.5kW - pump engine 0.75kW - number of knives 14pcs - knife dimensions 30x30mm - sieve 10x12mm - pressure drawer - electric auto reverse - dimensions l/w/h 1900x1200x1530mm - weight 990kg ADVANTAGES - auto reverse - German production - unpainted - like WEIMA WL4 - pressure drawer Dsdpep R I Nlsfx Aduewc - very good condition - used chipper Net price: PLN 48,900 Net price: PLN 11,510 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: ready for operation (used), Year of construction: 2008, - Shredder EUREC S 20.00 D - year of manufacture 2008 - low hours Djdexfrpfspfx Aduewc - good working condition - with wireless remote control and spare parts

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E - 2 x 110 kW Dwedpfxjxfrn Uj Adujc - with outlet conveyor and magnet - with new belts for outlet conveyor and magnet

Condition: refurbished (used), operating hours: 8,000 h, FULLY OVERHAULED-----READY TO WORK ONLY 6500 HOURS HAMMEL 750 E - Power 2 x 110 kW electric - with long discharge conveyor The following work has been done: - 2 pieces hydraulic motors were overhauled - 2 pieces hydraulic pumps were overhauled - new cooler fan installed Dwodpsxfrn Isfx Adusc - neu rubber belt for the conveyor installed - new drive drum for the conveyor installed - Service done with oil change The machine can be seen in working condition on our site at D-59329 Wadersloh.

Condition: ready for operation (used), Year of construction: 2011, LINDNER JUPITER 1800 - 200 kW with frequency inverter - ready to work Dwodpfx Adjxfrrgouec - with electrical cabinets

Condition: repair required (used), - Shredder Lindner Komet 1750 - one motor with 160 kW Dwsdpfx Ajxfrp Eodusc - Without electrical cabinet and hydraulics. - With all manuals. Electric and hydraulic diagrams.