Used Aweba Sale for sale (24,417)

Year of construction: 2009, condition: ready for operation (used), Coating line manufactured in 2009. This CEFLA EASY 2000 D features an infeed conveyor table with photocells, a dust removal brushing machine, and a spray booth with two automatic spray arms equipped with six spray guns each. It also includes a three-chamber drying oven and an air heat recovery unit. If you are looking to get high-quality coating capabilities, consider the CEFLA EASY 2000 D machine we have for sale. Contact us for further details. • Line components: • Infeed conveyor table with photocells • Dust removal brushing machine • Spray booth with two automatic spray arms (six spray guns per arm) • Steel belt conveyor for excess paint collection Pedpozhnfzofx Aahjpu • Automatic transfer conveyor to the drying oven • Three-chamber drying oven • Outfeed conveyor from the oven Additional equipment • Air heat recovery unit (recuperator) • Exhaust stack for volatile substances • Dust extraction system for the infeed table

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 12,000 rpm, travel distance X-axis: 505 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: OKUMA, controller model: OSP-U100L, number of slots in tool magazine: 44, number of axes: 6, This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 2000 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details. • Y-axis: yes • Through-spindle coolant (water) • Lower turret: no live tooling • Simultaneous machining: not available • Auto door • Robot interface: ready Additional equipment • SMW chucks: 10" and 8" to be supplied Ppjdpszhnb Ajfx Aahsu • Note: chucks currently installed on the machine are not included Technical Specification Counter Spindle Yes Driven Tools No Taper Size HSK 63 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser Ppedpfxsyfv Tvo Aaheu • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 31i B5, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis CHIRON DZ15W MAGNUM HS was manufactured in 2015. It features an X-travel of 730 mm, Y-travel of 400 mm, and Z-travel of 425 mm. The machine is equipped with a robust table surface measuring 1,060 mm x 430 mm. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ15W MAGNUM HS vertical machining centre we have for sale. Contact us for further details. • Quantity: 4 units available • Spindle drive: 14/15 kW • Max. torque: 95 Nm • Table surface: 1.060 mm x 430 mm Technical Specification Psdpfxezhm Emj Aahopu Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2024, operating hours: 235 h, controller manufacturer: FANUC, This PALMARY PCB-4520-3 centerless grinding machine was manufactured in 2024. It features a workpiece diameter capacity of Ø8–60 mm and a maximum workpiece length of 150 mm. The machine includes an automatic unloading attachment and adjustable speed for enhanced efficiency. If you are looking to get high-quality grinding capabilities, consider the PALMARY PCB-4520-3 machine we have for sale. Contact us for further details. Standard Features • Maximum Grinding Diameter: Ø60 mm • Regulating Wheel Speed: 30 rpm • Grinding Wheel Speed: 1,200 rpm (max. 45 m/s) • Grinding Processes: Infeed Grinding and Throughfeed Grinding • Integrated Dressers: 2 • FANUC CNC Control System • Adjustment Cart and Flange • Grinding Wheel and Flange • Standard Stopping Type Grinding Table • Stopping Type Blade • Diamond Dresser (2 pcs/set) • Main Axis Lubricating Device • Pilot Lamp Optional Equipment • Paper Filter (80 L/min with 260 L Tank) • Magnetic Coolant Separator (80 L/min) • Grinding Wheel Inverter (15 HP) • Fully Enclosed Splash Guard • Jib Crane for Grinding Wheel Change (PCB-45) • Vibration Meter for Manual Grinding Wheel Balancing (KINIK KGB-2010) Pjdpfxszhmuno Aahepu • Throughfeed Table for Small Diameters (Ø8–38 mm) • Throughfeed Table for Large Diameters (Ø35–60 mm) • Automatic Unloading Attachment (Throughfeed Grinding) • Adjustable Speed • Workpiece Diameter Capacity: Ø8–60 mm • Maximum Workpiece Length: 150 mm • Additional Infeed Blade Set (t = 6 mm, 13 mm, 20 mm) • Additional Throughfeed Blade Set (t = 6 mm, 13 mm, 20 mm) • Spare Flange for Adjustment Cart and Adjustment Wheel Additional Information • Machine has no CE Certificate

Condition: ready for operation (used), Year of construction: 2004, number of axes: 6, Welding robot manufactured in 2004. This ABB IRB 2400L Welding Cell features a robust design with a positioner model ABB IRB 500R and includes Fronius TPS 4000 welding equipment. It comes equipped with essential safety features such as a light curtain and safety fencing. If you are looking to get high-quality welding capabilities, consider the ABB IRB 2400L Welding Cell we have for sale. Contact us for further details. Ppedpfx Ajzhmryjaheu - Industrial Robot Model: ABB IRB 2400L- Positioner Model: ABB IRB 500R- Welding Equipment: Fronius TPS 4000- Supply Voltage: 3x400V/PE/N- Cable Cross-section: 5 x 16 mm²- Fuse Protection: 63 A delayed- Compressed Air Requirements: 6 bar, G1/2"- Robot Control Cabinet: Included- Machine Sequence Control Cabinet: Included- Robot Base Height: 800 mm- Safety Equipment: Light curtain, safety fencing, glare protection partition wall, service door (monitored by ABB), rear access protection (mechanical, h=1100mm)- Maintenance Units: Torch cleaning system, TCP Calibration unit- Control Stations: Main start panel, Pre-Reset button- Footprint Dimensions: Approx. 8025 mm (length) x 5500 mm (width)- machine hours: 68.107h

Year of construction: 2011, condition: ready for operation (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 BF 150 LCD with smartTNC, Mousepad, and DXF-Converter, overall weight: 45,000 kg, spindle motor power: 28,000 W, spindle speed (max.): 4,000 rpm, table length: 9,950 mm, table width: 1,150 mm, number of axes: 5, This 5-axis KIHEUNG RIGITRAX X 8000 was manufactured in 2011. It features an impressive X-axis travel of 8000 mm, Y-axis travel of 1350 mm, and Z-axis travel of 2000 mm. The machine is equipped with a powerful 28 kW spindle motor and a 40-fold tool changer for efficient operations. If you are looking to get high-quality milling capabilities, consider the KIHEUNG RIGITRAX X 8000 bed type milling machine we have for sale. Contact us for further details. Ppedpezhmn Ujfx Aahsu - Main Computer: MC 422 C with Software option 1 & 2- Table Length: 9950 mm- Table Width: 1150 mm- T-Slots Surface: 9 x 22 / 10 x 22 nr. x mm- T-Slots Distance: 125 mm- T-Slots Front Surface: 2 x 22 mm- Max. Table Load: 3500 kg/qm- Feed Rate (all 3 axes): 10000 mm/min- Rapid Traverse (X, Y, Z axes): 16000 mm/min- Feed Power X-Axis: 70 Nm- Feed Power Y-Axis: 27 Nm- Feed Power Z-Axis: 50 Nm- Spindle Taper: ISO 50, DIN 69871- Spindle Speed Range (2 Steps):- 1st Step: 0 - 1000 U/min- 2nd Step: 1001 - 4000 U/min- Main Spindle Motor Power (100% / 60%): 28 / 38 kW (SIEMENS Main Spindle Motor)- Axis Drives: AC-Drives SIEMENS- Coolant Tank Volume: 500 l (without through-spindle cooling) / 1500 l (with through-spindle cooling - 2 pumps)- Linear Measuring System: HEIDENHAIN scales with DA 300 compressed air system- Spindle Gearbox: ZF reduction gear, 2-speed (1-1000 / 1001-4000 rpm), cooled- Milling Head: Universal Automatic Milling Head A 4 Plus, "HURON" system, cooled, bi-rotational 2.5° x 2.5°, programmable and automatic positioning in 2.5° of the 45° and 90° planes (5-axis simultaneous / indexing preparation)- Tool Changer: 40-fold vertical/horizontal chain-type system, driven via servomotor, HEIDENHAIN encoder monitoring- Through-Spindle Coolant (CTS / IKZ): 16 bar high-performance cooling system with paper filter (DEUBLIN rotary union, 16 bar for spindle, 8 bar for 6 coolant nozzles at spindle nose)- Coolant Tanks: 2 tanks (1200 l clean tank and 500 l pre-tank) with paper band filter system (500 mm paper width, 10 micron filtration fineness)- Chip Conveyor: Wide hinged belt conveyor X 8000 rear-side, elevated discharge- Measuring Preparations: Prepared for TS 220 workpiece touch probe and TT 140 tool touch probe- Additional Features: Hydraulic counter-weight balance in Z-axis, spindle orientation for rigid tapping, PLC prepared for 4th axis, automatic taper blow-out unit (A2 + A4 head), automatic central lubrication, electronic portable handwheel HEIDENHAIN HR-410, Ethernet interface, automatic Power-Off- Machine Enclosure: Partial machine enclosure with 2 front doors for X 4000 or 4 front doors for X 6000 - X 8000- Paint Finish: Light grey RAL 7035, Carmine red RAL 3002

Condition: like new (used), functionality: fully functional, Year of construction: 2026, container length: 10 ft, For sale: Like-new 10-foot containers 🇩🇪🚨 These containers have barely been used and are in excellent technical and visual condition, almost as good as new. Condition & Features: ✅ Wind- and waterproof ✅ Robust steel construction ✅ Smooth-running double doors with original locking system ✅ High security with heavy-duty door rods ✅ Floor is dry, clean, and highly load-bearing Technical specifications: External dimensions: 2,991 x 2,438 x 2,591 mm (L x W x H) Internal dimensions: approx. 2,831 x 2,352 x 2,390 mm (L x W x H) Volume: approx. 15.9 m³ Tare weight: approx. 1,200 - 1,330 kg We also offer 8-foot containers! Feel free to contact us! Possible uses: Storage container for tools, machinery, or materials Construction sites, businesses, or private use Gardens, courtyards, clubs, or workshops Also ideal as a base for conversions (workshops, storage, tiny house projects) Ppodewu Unljpfx Aahju 🚚 Delivery available by arrangement! If you're interested, just get in touch – I reply quickly and reliably. 👍

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Pjdpfx Aszab Ibjahspu Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: ready for operation (used), Year of construction: 2017, clamping force: 800 kN, Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details. • Tie bar distance (H × V): 420 × 420 mm • Platen size (H × V): 595 × 595 mm • Mould height (min–max): 180–515 mm Pedpfx Asyn E E Teahspu • Max opening stroke: 515 mm • Max daylight: 515 mm + mould height (depending on configuration) • Injection unit options: • Screw diameters: 18 / 25 / 30 / 35 mm • Shot volume: 22–116 cm³ (depending on screw) • Max injection pressure: up to 3000 bar (depending on screw diameter) • Max injection speed: 300 mm/s • Machine category: Fully electric (no hydraulics for main movements)

Condition: used, functionality: fully functional, Year of construction: 2000, For sale: CIDAN HSM-F electric guillotine shear with an automatic back gauge. The machine was manufactured in Sweden and is in full working order and good technical condition. It has undergone a complete service, has been recently repainted, and is ready for operation. The machine is connected and can be inspected and tested at our warehouse. Technical specifications: Manufacturer: CIDAN Model: HSM-F Year of manufacture: 2000 Made in: Sweden Working length: 3050 mm Maximum cutting thickness: 2.5 mm Automatic back gauge: 750 mm Manual back gauge adjustment Sheet metal discharge system under the machine Adjustable extension of the front table for cutting longer sheets. Application: Ideal for sheet metal processing companies, sheet metal workers, ventilation manufacturers, roof and facade manufacturers, and other metalworking workshops where precise and reliable sheet metal cutting is required. Ppodpfx Aaszhk U Sjhju If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2024, Yokogawa WT5000-HG-F Precision Power Analyzer Manufacturer: Yokogawa Test & Measurement Corporation Type: WT5000-HG-F Model: WT5000 Machine Type: Precision Power Analyzer Date of Manufacture: 11/14/2024 For sale is a used Yokogawa WT5000-HG-F Precision Power Analyzer. This high-precision measuring system is suitable for demanding power, voltage, current, and energy analysis in research, development, test laboratories, power electronics, drive technology, and quality assurance. The modular design allows for the flexible use of various measuring elements and offers the highest measurement accuracy for modern testing tasks. Technical Data Model: WT5000 Version: HG-F Date of Manufacture: 11/14/2024 Measuring Modules: 7 slots Configuration: 760903 Current Sensor Elements (as shown in the pictures) Max. Voltage: 1000 V AC Sensor Power Supply: ±15 V DC Mains Connection: 100–120 V / 200–240 V AC Mains Frequency: 50 / 60 Hz Power Consumption: max. 650 VA Podpjzhl D Ijfx Aahepu Interfaces Ethernet (LAN) USB 3.0 USB Front Port GP-IB / IEEE-488 Video Out (XVGA) External Clock BNC Connectors Analog Pulse Inputs Features Large Color Touch Display Front-Side Control Panel Modular Design with Pluggable Measuring Elements 760903 Current Sensor Elements Multi-Channel Power Measurement Data Storage Function USB and Network Communication Rack Mounting Possible Power Cable Accessories as Shown in the Pictures Application Areas Precision Power Measurement Energy Analysis Active, Reactive, and Apparent Power Measurement Power Electronics Electric Motor and Inverter Testing Inverter Testing Battery and Accumulator Tests Automotive Test Laboratory Research and Development Quality Assurance Condition Used Optical condition as shown in the pictures. Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer 760903 Current Sensor Elements (as shown in the pictures) Power Cable Mounting Material / Accessories as Shown in the Pictures Scope of delivery includes only the items shown in the pictures. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 1999, total height: 1,917 mm, total width: 1,200 mm, product length (max.): 9,295 mm, Edgebander manufactured in 1999. This HOMAG Optimat KL 78/A20/S2 features a panel formatting milling cutter, bevel and rounding milling cutter, groove saw, and edge draw blade. It accommodates workpieces with a thickness range of 8 to 60 mm and has a working height of 950 mm. If you are looking to get high-quality edging capabilities, consider the HOMAG Optimat KL 78/A20/S2 machine we have for sale. Contact us for further details. Pedpfx Aezhlnmsahepu - Equipment: Panel formatting milling cutter, bevel and rounding milling cutter, groove saw, edge draw blade- Additional Equipment: Bühnen PU melting unit (with dedicated blue control box and temperature controllers)- Work Piece Length: min. 120 mm- Work Piece Width: min. 120 mm- Work Piece Thickness: min. 8 - max. 60 mm- Working Height: 950 mm- Machine Dimensions (from floor plan): Length 9295 mm, Total Height 1917 mm (approx. 2275 mm with open hood / noise enclosure open), Working line width approx. 1200 mm- Space Requirements: Length 9.6 m, Width min. 2.5 m, Height 2.3 m (flaps open)- Voltage: 400 V- Frequency: 50 Hz- Current: 55 A- Recommended Fuse: 63 A- Control Voltage: 24 V- Total Extraction Capacity: approx. 6010 m³/h- Air Speed: 28 m/sec- Compressed Air Consumption: approx. 816 NL/min- Pressure Drop: 200 mm WS- Electrical Connected Load: 32 kW- Extraction Connections: 3x Diameter 120 mm, 2x Diameter 60 mm

Condition: used, Line 6 Complete Can Filling LIne Jorgensen fully automated full can cleaner Domino 620i laser marking system with camera unit Graham Labelling System automated labelling line Accusort AL5010 4 head barcode reader Del Packaging IVCL/99/189 flat capping machine Dylog DYXIM D pass through X Ray machine Involvo PTF 28 PW fully automated case packing machine Thermo Scientific VERSA BOX 0 checkweigher Jorgensen fully automated depalletizing system Isoma Elevator L6 can elevator 2016 Ppsdey Uygyspfx Aahou Isoma De-elevator L6 can de-elevator 2016 Isoma Can Rinser L6 fully automated can rinsing system with invertor, Accusort, Coperion K Tron bulk material vacuum loader 2015 Sweco QC485156+C quick-change separator Aylesbury Automation 630/65 fully automated scoop dropping machine Automated can filling system Ishida DACS-W-030-SB-PB-1 chekweigher 2002 Angelus Model 50 PR DF can seamer Jorgensen Engineering twin head can gas chamber Angelus Model B3 P can seamer Please note, this lot 30466-400 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-401 to 30466-419 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: used, 410 Can Manufacturing Line Can size 99mm dia Capacity 230 cans/minute capacity Ppjdoy Uycbjpfx Aahsu Unbranded 3000Kg capacity empty pallet lifter. Slitting machine with Accu-sort barcode reader Stacking materials transfer system Can assembly welder Laquer curing tunnel 6 position can water pressure tester Can leak test system Can spin flanger with 50kg capacity hoist, associated controls and conveyors Please note, this lot 30466-434 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-435 to 30466 -442 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling Ppedpfxjzhlf Ss Aaheu • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport Psdpezhlgcofx Aahspu • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: ready for operation (used), Year of construction: 2004, total height: 2,600 mm, total width: 6,800 mm, product length (max.): 40,000 mm, Double sided edgebander manufactured in 2004. This HOMAG KBZ KFR20 / KFR526 complete production line features a turning station and a Bargstedt stacker. It is designed for formatting, milling, seaming, grooving, and edging panels in a single work process, specifically for storage and partition wall elements. If you are looking to get high-quality edging capabilities, consider the HOMAG KBZ KFR20 / KFR526 machine we have for sale. Contact us for further details. Psdpfx Aozhlapoahopu - Machine Type: Complete production line with turning station and Bargstedt stacker- Components:* M.01: OPTIMAT TBR100/30/12 (HOMAG)* M.02: PROF. KFR20/16/A3/15 (HOMAG)* M.03: OPTIMAT TDR310/30/12 (HOMAG)* M.04: OPTIMAT KFR526/10/A3/35 (HOMAG)* M.05: TFR560/S/R/24/21/3 (BARGSTEDT)* M.06: PROF. TSP410/ER/35/12/S (BARGSTEDT)- Length: 40m- Width: 6.8m- Height: 2.6m (with hoods/flaps open)- Function: Panels are formatted, milled, seamed, grooved, and edged in a single work process; specially configured for the production of storage and partition wall elements- Workpiece Length: min. 250 mm - max. 3,200 mm- Workpiece Width: min. 250 mm - max. 1,350 mm- Workpiece Thickness: min. 15 mm - max. 57 mm

Condition: ready for operation (used), Year of construction: 1999, total width: 8,500 mm, total height: 2,500 mm, product length (max.): 26,000 mm, Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Phase / Wiring: 3 ~ + N- Current (Amperage): 80 A- Control Voltage: 24 V- Included Equipment: Equipped with lifting tables and Liftomat- Loading Capacity: 3 stockyards with 25 panels each- Maximum Panel Dimension: 2,100 x 4,100 mm- Capacity: Up to 6 panels can be cut simultaneously- Discharging Table: Automatically height-adjustable clearing table- Special Features: Cut layout optimization for maximum material utilization and low waste Ppodpfx Aezhk Tujahju

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,500 kN, screw diameter: 45 mm, injection weight: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 358 cm³ • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450 °C • Max pressure: 190 bar • Max flow (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t Ppjdpfx Ajyyyn Uoaheu • Availability: Mid 2026 Additional equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm • Y-stroke: 1200 mm • Z-stroke: 2000 mm • Weight: 300 kg

Condition: ready for operation (used), Year of construction: 2003, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Travel force (moving plate): opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm • Min. mold height: 380 mm • Max. daylight: 1300 mm • Size of mold platens (H x V): 1060 x 1095 mm • Distance between tie bars (H x V): 710 x 710 mm • Ejector stroke: 250 mm Pedpfx Aeyyxmveahopu • Ejector force (forward/backward): 95 / 49 kN • Max. mold weight: 4950 kg Additional equipment • Handling system: Wittmann Robot System (2013) with the following robot travel (X/Y/Z): 420 / 1200 / 2000 mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm Psdpfx Aajyyyr Tohjpu • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Wittmann Robot System W650 (2001) • Hub Stroke X 1500; Y 2600; Z 3500 • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 280 Press’ colour production system. Item for sale: 1 x Xerox Versant 280 Press with the following equipment: Includes E300 controller Includes A-CF03 paper deck Includes A-FN13 booklet finisher Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 557,431 pages Colour: approx. 430,279 pages Black: approx. 127,152 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). Ppsdpfx Aaoyludmoheu The device has been tested for functionality A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. • Total hours: 64274 h; Operating hours: 43196 h • Counter spindle: 17 kW; max speed 5000 rpm; max bar diameter 45 (65) mm • CNC controlled axes: • X1: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z1: stroke 678 mm; rapid 30 m/min; acceleration 5 m/s2 • Y1: stroke 80 (+50/-30) mm; rapid 30 m/min; acceleration 5 m/s2 • X2: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z2: stroke 640 mm; rapid 30 m/min; acceleration 5 m/s2 • W2: stroke 690 mm; rapid 30 m/min; acceleration 5 m/s2 • Turrets: 2; 12 driven positions per turret; Tool system VDI 30; Max driven tool speed 4000 rpm • Coolant system: tank approx. 650 l; pump capacity per turret 20 l/min; pressure 7 bar • Power supply: 91 kVA • Base machine configuration and functions: • Drive for slide 1 and 2 (all 12 positions) • C-axis for main and counter spindle • Y-axis for slide 1 • Counterspindle collet cleaning with coolant • Mechanical preparation for oil mist filter • Electrical and software interface for bar loader • Angular synchronism between main and counter spindle • Automatic machine shut down • 2 additional on/off outputs (4 M-functions) • Rigid tapping • Piece and time counter • Software for polygonal turning (slide 1 and 2) • Constant cutting speed • Helical interpolation (slide 1) • Spindle speed control • Quadruple warning light • Cooling device for electrical cabinet • Control options: • Tool wear monitoring system (FANUC monitor) • Sister tool selection system (FANUC monitor) Additional equipment • IEMCA MASTER 865 MP 43 L bar feeder • Swarf (chip) conveyor, belt type • Workpiece unloading device including belt • Main spindle collet chuck MPF 65/140 (no axial feed), max Ø 65 mm • Manual collet changer SACO MPT65/140 and MPF65/140 • Counter spindle chuck SMW 175-BBD, incl. adapter • 1 set of soft jaws for SMW 175-BBD • Differential clamping pressure for counter spindle (two selectable pressures) • External flushing of jaws/collets with coolant on main and counter spindle • Various new spare parts available Technical Specification Ppodpozhkl Defx Aahju Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2015, operating hours: 42,222 h, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. Control system: CNC 310 isTotal hours: 61295 hOperating hours: 42222 hMain spindle power 20/25 kWCounter spindle power 17 kWMax. main spindle speed: 5000 rpmMax. counter spindle speed: 5000 rpmMax. main spindle bar diameter: 65 mmMax. counter spindle bar diameter: 45 (65) mmCNC CONTROLLED AXESStroke X1 165 mmRapid speed X1 30 m/minAcceleration X1 5 m/s2Stroke Z1 678 mmRapid speed Z1 30 m/minAcceleration Z1 5 m/s2Stroke Y1 80 (+50/-30) mmRapid speed Y1 30 m/minAcceleration Y1 5 m/s2Stroke X2 165 mmRapid speed X2 30 m/minAcceleration X2 5 m/s2Stroke Z2 640 mmRapid speed Z2 30 m/minAcceleration Z2 5 m/s2Stroke W2 690 mmRapid speed W2 30 m/minAcceleration W2 5 m/s2Number of turrets 2Number of rotating tools each station 12 all driven positionsTool system VDI 30Max driven tool speed 4.000 rpmApprox. coolant tank capacity 650 lCoolant pump acity (per each turret) 20 l/minPump pressure 7 barPower supply 91 kVALxWxH of the machine 4.500x1.990x2.300 mmApprox. machine weight 9.500 kgIEMCA MASTER 865 MP 43 L (4m) bar feederBase machine configuration:- Drive for slide 1 and 2 (all 12 pos.)- C-axis for main and counter spindle- Y-axis for slide 1- Swarf conveyor belt type- Counterspindle collet cleaning with coolant- Workpiece unloading including belt- Mechanical preparation for oil mist filter- Electrical and software interface for bar loader- Angular synchronism between main and counter spindle- Automatic machine shut down- 2 additional on/off outputs (4 M-functions)- Rigid tapping- Piece and time counter- Software for polygonal turning for slide 1 and 2- Constant cutting speed- Helical interpolation for slide 1- Spindle speed control- Quadruple warning light- Cooling device for electrical cabinetAdded options:I-V50011 Collet chuck Type "MPF 65/140" without axial feed for main spindle max. diameter: mping elements and other equipment:I-V50025 Manual collet changer type "SACO MPT65/140 and MPF65/140"I-V50092 Differential pressure for counterspindle, possibility of setting two different clamping pressures.I-V50083 1 set of soft jaws for chuck type "SMW 175-BBD"I-V50080 Chuck type "SMW 175-BBD" For counter spindle, including adapter for adapting the spindleI-V60050 Tool holder for drilling tools with internal cooling and cylindrical shank Ø 32mm,with clamping shank according to DIN 69880 (VDI 30) - 4pcsI-V60010 Radial tool holder for external machining type C1 with clamping shank according to DIN 69880 (VDI 30) - 5pcsControl system options:I-V12060 Tool wear monitoring system Monitor for CNC FANUCI-V12070 Sister tool selection system for Tool Monitor for CNC FANUCHydraulic and filtration equipment:I-V40045 External flushing of jaws/collets with coolant on main spindle and counter spindleSpecial optionsSK001 Special clamping device with mandrel for counter spindle product HAINBUCH AXFIX 811 including 2 colletsVarious new spare parts are included. Technical Specification Counter Spindle Yes Driven Tools Yes Ppodpfx Aaszhklwohju