Used Avantra 30 for sale (24,331)

Condition: used, mileage: 130,000 km, power: 96 kW (130.52 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl floor covering in the loading/passenger compartment, 240 A generator, LED loading compartment light, smoker's package, sliding door in loading/passenger compartment on the left, start/stop system, fleece battery 80 Ah (AGM, 2 batteries) Other equipment: Driver's side airbag, traction control (ASR), audio system: radio with USB and Bluetooth hands-free system, indicator light integrated in the exterior mirror, on-board computer, entry lights, electronic brake force distribution (EBD), electronic. Traction control, driver assistance system: hill start assist, driver assistance system: crosswind assist, lockable glove compartment, rear wing doors without glazing (opening angle 180 degrees), interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, high loading space partition behind driver and front passenger, without window with through-loading option below, steering column (steering wheel) adjustable in height/length, truck registration, model update, engine 2.0 liter - 96 kW TDCi KAT, parking pilot system, parking pilot system front and rear, wheelbase 3300 mm, spare wheel in driving tires, low emissions according to Euro 6d-TEMP emission standard, leather gearshift/selector lever handle, windshield wipers with interval switching, adjustable, headlights H4, sliding door loading/passenger compartment on the right, mud flaps front and rear, visibility package 2, seat package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, seat package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, bumper partially painted, style color package, daytime running lights LED, trend, tinted glazing, paneling in the loading/FG area: half-high, lashing rails on the side of the loading area, lashing eyes (8), heat-insulating glazing slightly tinted Bjdozicbgopfx Adrjdd Cooling system: Special equipment: Transcool Multitemperature system With 3-chamber -30C, +22C, +4C Auxiliary cooling 220V Payload: 700 KG Vehicle is in good condition!

Condition: used, mileage: 224,000 km, power: 96 kW (130.52 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl flooring in load/passenger compartment, 240 A alternator, LED cargo area lighting, smoker's package, sliding door on the left side of the load/passenger compartment, start-stop system, AGM battery 80 Ah (2 batteries) Additional equipment: Driver's airbag, traction control system (ASR), audio system: radio with USB and Bluetooth hands-free system, integrated indicator in exterior mirrors, on-board computer, entry lights, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, lockable glove compartment, rear wing doors without glazing (180-degree opening angle), interior pollen filter, body type: high-roof panel van, body variant: medium-height roof, high load compartment partition behind driver and passenger, without window but with lower through-loading option, steering column (steering wheel) adjustable for height and reach, truck registration, model update, engine 2.0 L - 96 kW TDCi CAT, parking assistance system, front and rear parking sensors, wheelbase 3300 mm, spare wheel with road tires, low emissions according to Euro 6d-TEMP standard, gear selector/shift knob in leather, windshield wipers with interval control, adjustable, H4 headlights, sliding door right side of load/passenger compartment, mud flaps front and rear, Visibility Package 2, Seat Package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, Seat Package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, partly painted bumpers, Style color package, LED daytime running lights, Trend, tinted glazing, half-height trim in load/passenger compartment, side lashing rails in load compartment, lashing points (8), slightly tinted heat protection glazing Cooling system: Special equipment: For pharmaceutical transport (PHARMATRANSPORT) Transcool Multi-temperature system Bdsdpfx Aszib Tbsdrsd With 3 compartments: -30°C, +22°C, +4°C Standby cooling 220V Payload: 700 kg Vehicle is in good condition! This is a take-away price without TÜV (technical inspection).

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,356 h, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,254 mm, travel distance Y-axis: 1,263 mm, CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details. - Total Hits: 24,439,006- Total Working Time: 11,309 hours- Actual Punching Time: 4,708 hours- Control System: CNC with dedicated console and Logitech keyboard interface- Multitool Setup: Station 2, Code 1 (6MT01)- Oil Temperature: 22 °C- Power Supply: 50 Hz- Bed Type: Brush table to prevent sheet scratching Bedpfxey Sar Dj Adrsdd

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 1. BARGSTEDT TBP16/DG/30/22/S Portal Loading System Vacuum portal for raw sheet loading (fixed edge on the right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Pallet return + light curtain protection 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Bjdpfxezh Uzio Adredd Empty pallet supply for loading • Capacity approx. 12 pallets • Stacking height max. 1,800 mm

Condition: ready for operation (used), KNOLL TS40-21/30 586 Centrifugal pump, 200318477, serial number: 210926, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bdjdpfx Aszh Sc Dsdred

Condition: used, Year of construction: 2022, Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: - Automatic valve opening/closing - Centralized fill-level adjustment (±50 mm) - Maintenance-free lifting cylinders - Automated lubrication system - Integrated washing/CIP system - Remote teleservice via Ethernet Safety: CE compliant, transparent guards with microswitches Bdodpexqz D Aofx Adrjd Includes: Format parts for 600 & 1000 ml bottles; adjustable star wheels (+/- Ø55-95mm)  

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Bjdpfjyvvn Nsx Adrjdd Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 100 - 1.800 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm Bdodpfx Adeyvvmxjrod throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, pressure 30 t stroke 170 mm distance spindle /table max. 700 mm Front light range 600 mm Lateral light range 195 mm weight of the machine ca. 200 kg dimensions 670 x 970 x 1900 mm Bdedpfoy Nnywox Adrjd Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor. Bdodpfx Ajzh I Agedrsd

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Bdodpfx Adefh Tmmered Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 15,000 rpm, input 15Kw, Hurco Winmax 5 Control, Spindle taper BT40, Bsdpfxjzh Hvxs Adredd 30 ATC, Coolant, Low volt light, Swarf Conveyor.

Condition: used, machine/vehicle number: 007905, Max. panel width: 1200 mm Bodpoy Nkrpefx Adrodd Max. panel length: 2500 mm Length of conveyor: 13800 mm

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Bdsdpfx Aezh D S Rsdrjd Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) Bsdpfxszh Dp Ao Adrjdd We are happy to answer further questions by phone.

Condition: used, maximum load weight: 32,820 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,730 mm, Year of construction: 2024, Equipment: ABS, SCHWARTE-JANSKY stainless steel V2A slurry tanker semi-trailer, 30,000 liters First registration 03/2024 Unladen weight only 6,180 kg BÖRGER rotary lobe pump, output max. 6,000 liters/min., with interchangeable housing shells, design without gearbox Automatic pump shut-off, filling level of the tank can be easily adjusted by the driver Flushing line DN150, with 3 outlets (in front of each baffle and in front of the front floor) Bdodpfx Asy S Npxedrod 2x baffle plates Manhole cover DN500 Suction funnel 8" at the top rear Hose trays, stainless steel, approx. 6,000 mm long on the left Swivel outlet at the rear in 6" with Perrot coupling Emptying device for the product hose All valves pneumatically operated, including monitoring function Valve control with WIRELESS REMOTE CONTROL Complete piping system made of V2A stainless steel SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE 3rd axle: Steerable trailing axle WABCO trailer EBS with RSS stability program Tires 6x 385/65 R 22.5 Saddle height approx. 1,150 to 1,250 mm Crank-operated full-load saddle supports Stainless steel storage box on the left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING; with us, it is also immediately available with a full-service rental.

Condition: used, axle configuration: 3 axles, first registration: 07/2018, loading space length: 7,550 mm, loading space width: 2,280 mm, loading space height: 1,500 mm, total length: 9,000 mm, total width: 2,500 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Tare weight: 5520 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Air suspension, ABS, EBS, Body construction year: 2018, Body material: Aluminum, Number of sides: 1 side, Tipper drive: PTO, Drum volume: 25, Drum volume in: m3, Axle type: BPW = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread left: 11 mm; Tire tread right: 14 mm Axle 2: Tire tread left: 12 mm; Tire tread right: 14 mm Axle 3: Tire tread left: 4 mm; Tire tread right: 12 mm Weights Tare weight: 5,520 kg Payload: 33,480 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition Overall condition: average Bedpfx Ajzhtnzjdrjdd Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €296 per month (default, 60 months); Inquire for more information and terms = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • Good price • Sound business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Inquire directly about our European warranty package.

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable Bdodpfx Ajx Url Ujdrsd - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact Bodpsxtakmefx Adrjdd - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, total length: 900 mm, total width: 800 mm, total height: 1,900 mm, laser hours: 2 h, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, laser source manufacturer: Raycus, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm Bjdpeqfcvisfx Adrodd - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, total length: 900 mm, total width: 1,550 mm, total height: 1,900 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Bodpfx Ajunh H Ssdredd Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), machine spirit level, block spirit level, frame spirit level, spirit level, precision spirit level, frame spirit level Bodsu H R A Ispfx Adredd -Machine spirit level: frame spirit level -Frame size: 150 x 30 mm -Reading: 0.3 mm/m -Dimensions box: 195/195/H55 mm -Weight: 1.7 kg

Condition: ready for operation (used), For sale here is a main spindle from a Fooke Endura milling machine; it is in working condition. Bdjdpfxezhh Ipj Adred

Condition: defective spare-parts repository (used), Year of construction: 2017, operating hours: 26,000 h, functionality: not functional, overall weight: 609 kg, total length: 1,287 mm, total width: 799 mm, total height: 1,296 mm, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 262,800 m³/h, operating pressure: 10 bar, noise level: 72 dB, type of cooling: air, Equipment: documentation/manual, The frequency inverter is defective, but otherwise the unit was fully functional until the end. Regularly maintained. Bdedpfxjzinwae Adred Available for sale; offers are welcome.

Condition: used, functionality: fully functional, overall weight: 600 kg, – Relatively good condition – Manufactured in Austria TECHNICAL SPECIFICATIONS: Bdedpfx Adozinu Eersd – Hopper dimensions: 120 cm x 100 cm – Power: 2 x 11 kW – Four axles – Axle length: 400 mm – Axle diameter: 300 mm – Screen: Ø 30 mm – Auto-reverse – Dimensions (l/w/h): 140 / 130 / 200 cm – Weight: 600 kg