Used Avantra 30 for sale (24,581)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, cutting force: 12.5 t, sheet thickness steel (max.): 6 mm, overall weight: 2,000 kg, Equipment: CE marking, emergency stop, finger protection, foot remote control, Hydraulic notching machine Manufacturer: Boschert, Type: K30 – 120, Punching press: Trumpf Year of manufacture: 2001 Technical data Width x Depth x Height: 1.5 x 1.6 x 1.4 m Weight: 2,000 kg Table dimensions: 1600 x 1000 mm Lasdpfx Aezcm Ncokcjc Station 1: Notching Angle range: 30 - 120 degrees (infinitely adjustable) Cutting length: 200 mm Cutting capacity: 6 mm in ST 40 steel 4 mm in stainless steel Station 2: Punching (Trumpf tool system) Punching force: 12.5 t Punching diameter: 105 mm max. Overhang: 300 mm All information is subject to change without notice. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65R22,5², tire condition: 100 %, Customized transport solution Configure according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, cannot be uncoupled while loaded, when uncoupled, the vehicle must be tilted backwards. 2 support wedges with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to deflect stones With anti-spray flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering & start assist, activated 3 times by the brakes (start assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of ABS! With lifting and lowering valve Vehicle stability system Automatic tilting lowering + shut-off valve Wheels + Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw collar, fixed part, NW 48 mm. Laedpfx Aksi Ri H Iscec Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front panel 5 mm thick, with external side panels made of 30 mm hollow section profiles, cleanly welded, with upper profile designed to prevent spillage. Inside with access ladder on the front panel. Shovel and broom holder on the outside of the front panel. Greenline - conical and aerodynamic tipper body design Membrane - rear wall Rear wall as a swing gate with double-hinge hinge, mounted externally with a double hook lock. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with access ladder, connection plate for air/electricity and brake with plenty of space for the best possible operation. Roller cover on one side for stowing on the right, with central locking on the left Operating instructions For transporting salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust. The stated total weight is technically possible; depending on the load, the total weight may not be reached while observing the permissible axle/support and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 32,400 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 1,295 mm, total length: 12,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, saddle, container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Front locking mechanism on the tipper ram mounting bracket with lateral locking Tapered locking wedges, rear locking mechanism on a continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking crossmember, 2-fold for locking 1 x 30 ft or 1 x 40 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt lock. Optimal saddle load when transporting 30 ft and 40 ft containers. 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders with anti-spray flaps according to EC Hydraulics 100 low-pressure cylinder, max. 150 bar, with HDK screw connection, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive, included. Lasdpoi Riv Eefx Akcec Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total weight Air suspension Braking system 170 2-line compressed air braking system Color-coded line routing for easy service. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be prepared accordingly Wheels and tires 385/65 R22.5, manufacturer at the manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Year of construction: 1973, condition: used, bore capacity in steel (diameter) 32 mm arm length 410 - 1000 mm workpiece height max. 765 mm coolant ja boring spindle diameter 38 mm diameter of quill 70 mm spindle stroke 225 mm boring spindle MK 4 mm/min spindle turning speed - stepless 70 - 2000 U/min feed range - spindle 0,04 - 0,32 mm/U column diameter 225 mm bore radius max./min max. 1130 mm table surface area 630 x 1320 mm height adjustment 500 mm Laodpfx Aegmu A Sskcjc base plate 1500 x 1000 mm T-slots 4 Stück T-slot - distance 18 mm total power requirement 2,2 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m shift of supports: 590 mm without turntable and tools

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 14151, overall weight: 3,485 kg, working width: 3,100 mm, sheet thickness (max.): 2 mm, We are offering this used Göteneds K25-30 A 1200 bending machine, manufactured in 1996. Model: K25-30 A 1200 Lsdpfxezdzxgj Akcjac Working area: 3100mm x 2.0 mm Manufacturing number: 14151 Year of manufacture: 12/96 Weight: 3485 kg The machine received a new gearbox and a new display some time ago. The machine is in good used condition and has some minor inaccuracies due to its age. However, it is perfectly adequate for many applications. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2022, operating hours: 2 h, PROD. ATLASCOPCO TYPE GA30VSD S/N API470017 YEAR 2022 POWER (kW) 30 CAPACITY (m3/min) 6.6 DISCHARGE PRESSURE (bar) 10.5 HOURS (RUNNING/TOTAL) 2 FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air Lodpfx Akozdzr Tscoac

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 700 mm, total width: 600 mm, total height: 1,220 mm, DGUV certified until: 07/2027, Equipment: CE marking, documentation/manual, Loading oven, Eloma Backmaster EB 30 T, double station TOP convection oven, countertop model for 3 baking sheets with exhaust hood on top stainless steel construction only available from us, DGUV V3 certified 2 x 230V connection Dimensions: 600 x 700 x 1220 mm, W x D x H Used equipment with warranty + spare parts service Quality from a specialist company & service partner! Benefit from over 35 years of experience! Options: Baking sheets Water filter Base frame Maintenance contract Delivery service Spare parts box for increased safety Service package Training & commissioning Laedpfx Asxxgmrskcsc We have many more ovens in stock!

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Low-bed trailer by STEMA, model SySTEMA ST 27-30-18.2, equipped with tarpaulin and Premium frame, 150 cm (185 cm internal height), gross vehicle weight: 2,700 kg, with overrun brake, 100 km/h Lodpfsytzubox Akcjac Subject to errors and prior sale.

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Low loader by STEMA, model SySTEMA ST 27-30-18.2, with Premium tarpaulin and frame 150 cm (185 cm interior height), GVWR: 2,700 kg, overrun brake, approved for 100 km/h Ledpfoyqdqgox Akcoac Subject to errors and prior sale.

Condition: used, mileage: 81,436 km, power: 206 kW (280.08 HP), first registration: 06/1987, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 3 axles, color: brown, gearing type: mechanical, total width: 2,500 mm, total height: 3,690 mm, Equipment: crane, Subject to errors and prior sale! Internal number: 1380. F003582 ---- EQUIPMENT * ex-Austrian Army * 6 seats (two individual seats in the front, 4 seats on the bench in the back) * 6 cylinder diesel engine * Dead weight 20.55 tonnes * GVW 22 tonnes * 2x4-speed gearbox with converter - drive on all wheels * Ringfeder trailer hitch - max. trailer load 16 tonnes * For further equipment and condition, see pictures... and much more Lodpfxjrbwmbo Akcjac ---- The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a deposit! Do you have any questions? We are happy to advise you!

Condition: used, maximum load weight: 1,037 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 05/2022, loading space length: 3,070 mm, loading space width: 1,830 mm, loading space height: 600 mm, total width: 1,900 mm, total height: 600 mm, A10 GW26G000366 Vehicle transport trailer by STEMA, model Carrier XL 15-30-18.1, Ljdjym Ifgjpfx Akceac Registration no.: L-AH 142, chassis no.: WSEHARF41NG000366, GVW: 1,500 kg, high-loader, with overrun brake, 100 km/h, 2 loading ramps behind the license plate, new tires Errors and prior sale excepted.

Condition: used, maximum load weight: 33,820 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,315 mm, Year of construction: 2025, Equipment: ABS, GRANALU Full-Aluminum 3-Axle Tipper Box, 30 cbm First registration: March 2025 Mileage: only 54,008 km Internal dimensions (L x W x H): 8,000 x 2,340 x 1,600 mm Loading height: only 3,315 mm Gross vehicle weight (technical): 39,000 kg Unladen weight: 5,180 kg Lasdpfxjyzlr Uo Akcsc JOST axles with large disc brakes, 430 mm 1st axle is a lift axle with off-road starting aid WABCO trailer EBS with RSS stability control WABCO TPMS tire pressure monitoring system Aluminum air tank Lighting: full LED ALU LEG heavy-duty drop-down support legs HYVA tipping cylinder, type Alpha, suitable for high and low pressure Body floor is continuous 8 mm high-wear-resistant HERKAL aluminum Side walls made of 6 mm high-wear-resistant ALU profiles with insulating air chambers, tapering to 3 mm towards the top rail. Additionally, 4 mm tapered wear plates at the rear, approx. 2,000 x 700 mm, also made from HERKAL aluminum Slanted front wall made of 5 mm aluminum Top-hinged, swinging tailgate with double-joint bearings and two tension locks at the bottom, complete with all-round rubber sealing Roof roll tarp with central locking RENTING is the new BUYING—immediately available from us as a full-service rental option.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Lajdpoy Dgrnjfx Akcoc Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: excellent (used), functionality: limited functionality, Year of construction: 2003, ITALTECNICA Hydraulic Guillotine Shear Year of manufacture: 2003 CE. Lasdpfx Akjw T Tcqocsc Usable cutting length: 3050 mm Maximum cutting thickness: 6 mm Programmable controller ESA TRIA 250 Adjustable cutting angle Motorized back gauge with pneumatic sheet support. Weight: 8,000 kg Motor power: 7.5 kW Safety guards included.

Condition: new, Year of construction: 2025, OMCN P30/SA hydraulic press with a 2-speed hand pump, 30 tons. OMCN P30/SA hydraulic press with manual operation via a two-speed hand pump and a robust base frame that provides maximum stability and minimal footprint. Thanks to the perforated frame, the support base is height-adjustable in 9 different positions, allowing the press to be adapted for working with parts of various sizes. The winch allows for convenient and quick lifting of the worktable. + faster approach + precision Essential in workshops and in the industrial sector, perfect for pressing metal objects, for example, during the assembly of mechanical components, the fitting of bearings or pulleys onto shafts. Made in Italy and CE certified, this press is manufactured with robust materials that guarantee reliability over time and is capable of generating a force of 30,000 kg. Footprint: 2180 x 1300 x 600 mm Ledpfsklyvtox Akcjac Weight: 280 kg Pressure: 30 tons Distance between uprights: 695 mm Piston stroke: 190 mm Piston diameter: 60 mm

Condition: new, Gamba & Fiorito Gamfior MKA 30-L spindle, hole spacing of the mounting holes: 82x82 mm, drive shaft diameter: 18/10 mm (external), 5 mm (internal), unused, in new condition, 100% functional. Lsdpfsi D H T Iex Akcsac

Condition: ready for operation (used), Demag DCS-Pro 1 80 1/1 H3 VS30-30 chain hoist / crane SN: 94828902 - load capacity: 80 kg / control cable length: 2.00 m - chain length: 1.40 m, used, in good condition, fully functional, delivery as per photos. Lasdpfx Akex Eq Hlscjc

Condition: ready for operation (used), Bosch SM 20 / 30 - SM 20/30 GTC Pulse Inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Laodpfsi D Uc Rox Akcec

Condition: ready for operation (used), Bosch SM 20/30 LN servo module 310606, used, only briefly used for testing purposes, 100% functional, scope of delivery as shown in the photos. Lasdji D Udgepfx Akcec

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Laodpfxex Eu Uyj Akcoc

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lasdoul In Repfx Akcoc

Condition: ready for operation (used), Baumüller BUG2-60-30-B-003, integrated rectifier unit, serial number: 993305921. Professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Lsdpfsi D T Hmsx Akcsac

Condition: ready for operation (used), Baumüller BUS20-60/135-30-001, refurbished and tested in accordance with professional standards, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Serial number: 91314741. Ljdpsi D T Hujfx Akcsac

Condition: ready for operation (used), Bosch MP 30 control panel, used, with normal signs of wear, 100% functional. Lsdpfx Aei D Uagekcjac

Condition: ready for operation (used), Bosch SM 20 / 30 GTC - SM 20/30 GTC pulse inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lodpfx Aei D Udcokcoac