Used Aufteilen Sawing Plate for sale (17,481)

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conische buiging met geharde rollen met gemotoriseerde backroll Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm Rbsdpoxzvp Uofx Ahzet

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie. Number of rolls: 4 Roll capacity cold: 3100 x 20 mm Roll dia upside: 370 mm Redpfox Enfxjx Ahzsbt Pre-bending: Yes

Condition: new, Year of construction: 2025, neu 2025 090120 prompt, Zwischenverkauf v Türkei 7100 € 137.03 € 1 1 1050 mm 3 mm 90 mm 6 m/min Rbsdpfx Ajwira Ijhzst 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m². Redpetq I Rqefx Ahzsbt

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm Rbjdpsycxgmsfx Ahzot - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, – Saw blade 400 mm – Double mitre – 2 pneumatic clamps Rsdpfx Aegg N Drjhzjbt – Misting lubrication system – Blow gun – Protective cover – Documentation – 400V

Condition: used, functionality: fully functional, – robust construction TECHNICAL SPECIFICATIONS: – max. cutting width: 3050 mm – min. cutting width: 450 mm – max. cutting height: 125 mm – saw blade diameter – three cutting units – each cutting unit adjustable independently: 500 mm – motor power: 3 x 4 kW – feed motor power: 1.5 kW – two feed speeds – material hold-down – loading magazine for boards – transport dimensions (L/W/H): 620 / 200 / 120 cm – weight: ~ 800 kg Rjdpfx Ajw Nau Sjhzjbt

Condition: excellent (used), Year of construction: 2021, For sale: Struers laboratory cut-off machine, model Discotom-100 FT 3x380-480V, year of manufacture 2021. The saw is in perfect condition, having operated for approximately 20 hours in our facility. Included in the set: a coolant tank with complete control equipment. Greater versatility and performance in one cut-off machine. Device description Discotom highlights: Rbjdpfsyfxfhjx Ahzot • OptiFeed – intelligent feed control • AxioWash* – automatic cleaning system • ExciCut – designed for cutting extremely hard materials • MultiCut – serial cutting (enabling multiple sample preparation) • Method database • Cutting disc database The Discotom-10 and Discotom-100 are versatile benchtop cut-off machines, designed to economically expand your cutting capabilities and improve sample preparation processes. With a spacious and ergonomic design, both models offer exceptional flexibility for a wide range of clamping and cutting options for different sample types. This allows for efficient operation with less effort and minimal material deformation. Fast and precise State-of-the-art cutting technologies, such as intelligent speed adjustment, ensure exact and rapid cuts. Simply select the hardness of the material, and the machine automatically sets the optimal speed. Outstanding versatility If the disc becomes clogged with removed material, the user can select the automatic Direct Cutting mode with constant feed speed or the Impact Cutting mode. ExciCut manual mode is dedicated for separating harder and larger samples. The optional X-table automatic table unlocks the MultiCut function, allowing samples of identical or varying thickness to be cut precisely at specific positions. Time-saving operation The multifunctional rotary knob enables fast and easy setting of cutting parameters. Automatic speed setting not only saves time but also allows for using the same disc for various materials, eliminating the need for frequent disc changes. Swift switching between manual and automatic modes is supported by the motorized cutting arm lock, and a color display with icons provides a comprehensive overview of all essential information.

Condition: excellent (used), Pinheiro track-fed multi rip saw Rsdpfjycvy Rjx Ahzsbt

Condition: excellent (used), functionality: fully functional, Double-shaft multiblade saw TOS SVITAVY PWR 422 450/250mm Redpoycvf Tefx Ahzobt Track width: 450mm Shaft width: 450mm Shaft diameter: 60mm Bushing diameter: 80mm Maximum cutting height: 20–250mm Saw blade diameter min/max: 250–450mm Maximum width of incoming material: 860mm Minimum length of incoming material: 900mm Saw motor power: 2x110kW Feed speed adjustable via frequency inverter: 4–40 m/min

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, R0.11.75 class si 400ep Blade Off 57.00.42 Angle guide with 3 LCD screens for positioning the stops 57.04.43 Automatic adjustment with 2 axes for the scoring unit group 57.04.21 Chassis for angular processing with CompeX device Rbodeyfxaljpfx Ahzot 57.03.53 Panel support table extension with roller conveyor on the parallel guide side

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: - Min. workpiece length: 400 mm - Max. length: 6000 mm - Max. workpiece width: 200 mm - Max. workpiece thickness: 200 mm - Roller motor power: 0.75 kW - Chain motor power: 1.1 kW - Feed rate adjustable via geared motor - Roller speed: 19 - 118 m/min - Belt speed: 10 - 60 m/min - 8 guiding belts - 17 steel feed rollers - Roller diameter: 80 mm - Roller height from base: 900 mm Rjdpfjxfgpgjx Ahzsbt - Pneumatic pressing - Dimensions (L/W/H): 565 / 175 / 120 cm - Weight: ~ 1500 kg

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0101-1030, cutting width (max.): 390 mm, cutting height (max.): 107 mm, saw blade diameter: 315 mm, table length: 805 mm, total length: 1,350 mm, total width: 760 mm, total height: 1,110 mm, overall weight: 258 kg, rotational speed (max.): 2,780 rpm, input voltage: 380 V, There are also roller conveyors included at the front and rear, each with a length of 2,350 mm, as shown in the pictures. The infeed unit is a Maggi STEFF 2048. Maggi Power Feeder STEFF2048 Professional power feed with fixed speeds. Safety device for safe and efficient material feed on various types of traditional woodworking machines. - Increases safety: The operator does not have to place hands near the tool - Improves finish quality thanks to a constant and even feed rate - Feed rate can easily be selected to suit specific working requirements - Easily adjustable to accommodate different workpiece sizes MODEL TECHNICAL SPECIFICATIONS Rbedjyfw Smopfx Ahzot Main features: 8 fixed speeds (2-4-5.5-6.5-11-13-16.5-33 m/min) 4 wheels (diameter/thickness 120x60 mm) Motor power: 1 HP / 0.75 kW - 1,400/2,800 rpm Housing made of cast aluminum, machined on high-precision machining centers Steel device cover Environmentally friendly, rust-resistant powder coating Manufactured according to EC standards TECHNICAL DATA SHEET Number of forward/reverse speeds: 8 Fixed speeds: 2 - 4 - 5.5 - 6.5 - 11 - 13 - 16.5 - 33 m/min Number of wheels: 4 Wheel diameter and thickness: 120 x 60 mm Motor: 1 HP / 0.75 kW rpm 1400 / 2800 Wheel suspension: 20 mm Distance between wheels: 133 mm - 143 mm - 145 mm Distance between first and last wheel: 421 mm Overall dimensions and net weight of the feeder unit: 615 x 220 - 490 mm - 35 kg Package dimensions and gross weight (feeder unit): 670 x 570 x 330 mm – 37 kg

Condition: good (used), Code: 0655 Brand: STRIEBIG - SWITZERLAND Model: STANDARD III 6220 - CE Standard Manual vertical panel saw for cutting wood panels, plywood, furniture, composite materials, plasterboard, sandwich panels, plastics, aluminium and various materials - CE Standard Technical characteristics: Machine frame with 40 welded cross beams and therefore very rigid Support on 17 rollers and three brake pedals for sliding panels Extremely stable motor column Compact vibration-free saw unit Integrated strip stop for repetitive cuts Sturdy pressure pad for material clamping and perfect suction on the front side Easy rotation of blade unit Support for small panels Reference stops Technical data: Cutting dimensions mm 5300 x 2200 Horizontal height cutting mm 2100 Cutting depth mm 80 Blade diameter mm 300 F 30 Blade speed 4750 rpm Motor power Kw 5,5 ( Hp 7,5) Installed power Kw 7 Suction inlet diameter mm 125 Rbjdsyctpvjpfx Ahzjt Overall dimensions of assembled machine mm 6665 x 3015 x 1810 h Weight kg 840 Overall dimensions for transport : Frame mm 6500 x 1300 x 2550 h - Weight kg 420 - Beam mm 3050 x 870 x 720 h - Weight kg 420

Condition: used, saw blade diameter 450 mm capacity 90 degrees: round 130 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 210 x 170 mm Rsdpfx Aoyfwxaohzobt capacity 45 degrees: square 145 x 170 mm turning speeds 2900 U/min total power requirement 2,3 kW weight of the machine ca. 600 Kg dimensions 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue!!

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Rodpfoyfwn Uox Ahzobt Shipping available on request. Forklift available for loading.

Condition: used, Double sawing saw Hüllhorst Type DH for bilateral, precise length cutting of timbers and boards. The machine enables rational operation through two opposing saw heads and precise length positioning. The machine is also equipped with dado/dovetail cutters for milling grooves for strapping bands in packaging cant logs = cant haws with groove. working width: 1.700 mm Rbjdpfx Ahoycqigozst Saw blade Ø: 350 mm cutting length: 1.200 mm

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Thank you for your inquiry regarding a KASTO bandsaw SSB 260 VA Fully hydraulic, heavy-duty, high-performance bandsaw in robust construction, with a horizontally parallel traveling saw blade, designed for cutting profiles, tubes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy). Suitable for use with bimetal and carbide saw bands. The saw unit is manufactured as a solid component from polymer concrete, providing maximum running smoothness and extended blade life. Guidance of the saw unit via a vertical and one round-column guide (double-column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned carbide saw band guides. Rbodpfoxwzr Hox Ahzjt Material clamping is performed using two hydraulic vices. The machine controls offer simple operation. Cutting length is entered via handwheel with 0.1 mm resolution. Piece count is set via a counter; upon reaching the set quantity, the machine automatically stops. Material feed is via a feed cylinder, ensuring maximum cut-to-length accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA Specifications Maximum cut size: 260 x 260 mm (Ø 260 mm) Technical Data – Bandsaws KASTO Automatic Bandsaw Machine type: SSB 260 VA Guide system: 2-column guided Year of manufacture: 1999 Cutting capacity: 260 x 260 mm Main drive power: 4 kW Auxiliary drive power: 6.5 kW Cutting speed: 15-125 m/min Saw feed hydraulics: Infinitely adjustable Saw band dimensions: 4115 x 41 x 1.1 mm Feed stroke: 600 mm Max. multi-stroke feed: 5400 mm Material support height: 850 mm Machine dimensions (L x W): 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories - Chip conveyor - Coolant system - Multiple feed - Side guide rollers - Machine roller track - Adjustable side guide rollers - Prepared for bundle clamping - Multiple feed counter - Clamping force reduction - Hydraulic hold-down device - Vibrating table - Machine lamp

Condition: excellent (used), Year of construction: 2018, Technical Data: Rbedpeyfu Hbefx Ahzjt This FICEP system allows steel profiles to be drilled and sawn to length in a single operation. Rolled profiles such as I-beams, T-beams, U-channels, angle steel, hollow sections, and flat steel can be processed. Sawing capacity: 650 mm Profile dimensions: 450 x 300 mm Working area: 15,000 mm Max. workpiece length (output): 8,000 mm CNC control: FICEP Mitrol CNC with PEGASO software and DSTV data interface Saw blade: 6700 x 41 x 1.3 mm Double miter saw: 45° / 60° X-axis travel: 300 mm Number of drilling spindles: 3 pcs. Max. drilling diameter: 50 mm Tool changer: 6-position Milling and marking The seller assumes no liability for errors in writing or data transmission. The machine conforms to age-related condition in appearance, technology, and wear; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1990, functionality: fully functional, saw blade diameter: 1,600 mm, Sharpening machine for metal HSS saw blades Rodpjyfumzsfx Ahzobt

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 424.05.131.13, cutting length (max.): 3,200 mm, cutting width (max.): 800 mm, cutting height (max.): 104 mm, saw blade diameter: 315 mm, overall weight: 740 kg, rotational speed (max.): 4,000 rpm, input voltage: 400 V, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, saw blade guard, Further technical data Panel saw with blade tilting 90°–45° Cutting width 800 mm with full table length Minimum transport width 1000 mm Sliding table, cutting length 3200 mm, anodized Outrigger table 1500 mm Rbedpsyfuk Hsfx Ahzjt Outrigger table crosscut fence 3200 mm Working height in mm: 890 Extraction connection diameter in mm for circular saw/blade guard (overhead guard): 120/80

Year of construction: 2022, operating hours: 1,160 h, condition: excellent (used), functionality: fully functional, Unique custom paint finish TECHNICAL DATA Working Area Worktable: 4,200 × 2,000 mm Extension table: 4,200 × 1,000 mm Table height: 735 mm Load capacity of worktable: 2,000 kg Axes 5-axis CNC swivel head saw X-axis: 4,250 mm (0–54,000 mm/min) Y-axis: 3,200 mm (0–54,000 mm/min) Z-axis: 600 mm (0–12,600 mm/min) C-axis: 540° (+/-270°), max. 9,000°/min B-axis: +8° to -90°, max. 9,000°/min Saw Unit Saw motor: 18.5 kW with 120 Nm torque, 4,500 rpm Blade diameter: min. Ø 350 mm, max. Ø 625 mm Cutting depth: max. 200 mm (90°), max. 130 mm (45°) Flange diameter: Ø 213.3 mm Drive shaft: Ø 50 mm H7 Water pressure: 4 bar Drives / Guides Brushless servo drives Rack and pinion and Bosch Rexroth linear/slideway guides Fully automatic central lubrication Traversing speed (rapid traverse) up to 54 m/min Control CNC control OSAl OPEN M Integrated PC with Windows 7 Control of up to 8 axes in interpolation Interface for *.dxf files Remote maintenance with internet connection Electronic pressure control and automatic tool wear compensation CAM Software DDX “SMART SAW” (German) Laser Electronic red laser for saw cut positioning Mounted on the saw blade housing For straight cutting operations Electrical Cabinet / Control Panel 21.5" TFT monitor Keyboard and joysticks CMS Active user interface Control panel mounted on the right side of the machine Redpfx Ahsyft S Njzebt Machine Data Connected load: approx. 25 kW at 400 V ±5 %, 50 Hz Noise level: approx. 75 dBA Weight: approx. 8,000 kg Machine dimensions: approx. 8,380 × 5,270 × 3,600 mm (W × D × H) Safety Complete CE safety configuration Safety doors, covers and protective grilles Built according to EU Machinery Directive DESCRIPTION 5-axis CNC swivel head saw CMS Brembana Sprint 36 OF – Industrial quality for natural stone & ceramics For sale is a 5-axis CNC swivel head saw CMS Brembana Sprint 36 OF from a professional production facility. The machine is designed for the precise processing of natural stone, engineered stone, ceramics, porcelain stoneware, and glass. Thanks to the powerful 18.5 kW saw unit, the full-fledged 5-axis tilting head, and CNC control OSAl OPEN M, this system is ideal for miter cuts, bevel cuts, contours, multiple cuts, and complex workpieces for high-end interior finishing. The robust welded steel construction, premium Bosch Rexroth guides, and automatic central lubrication ensure high precision, repeatability, and long service life in continuous industrial operation. Suitable for: – Natural stone – Engineered stone – Ceramics / porcelain stoneware – Glass Highlights: – 5-axis CNC swivel head saw with large working area – Worktable 4,200 × 2,000 mm plus extension table – CNC control OSAl OPEN M with DDX “SMART SAW” – High positioning speeds up to 54 m/min – Industrial-grade robust construction – Custom paint finish according to client specification – CE-compliant safety equipment – Inspection by arrangement possible Condition: Used, very well maintained, technically flawless, in operation. Reason for sale: Strategic realignment of the company. Price: €139,000 net Location: North Rhine-Westphalia, Germany. Note: Sale as seen. Dismantling and transportation by the buyer.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,200 mm, cutting height (max.): 110 mm, saw blade diameter: 315 mm, table length: 3,200 mm, total length: 3,300 mm, total width: 1,500 mm, total height: 1,500 mm, height adjustment type: electric, overall weight: 800 kg, input voltage: 400 V, Equipment: motor brake, Ex-demonstration panel saw in perfect condition. Electrically adjustable saw blade height (up/down). Manual adjustment of saw blade angle. Scorer saw powered by a separate motor. TECHNICAL SPECIFICATIONS: - Maximum cutting length: approx. 3200 mm - Maximum cutting height (90°): approx. 100–110 mm - Maximum cutting height (45°): approx. 70–80 mm - Main blade diameter: 300–315 mm - Scoring blade diameter: 120 mm - Main blade rotational speed: 4000–6000 rpm - Scoring blade rotational speed: approx. 8000 rpm - Main motor power: approx. 5.5 kW Rjdpfxeyft Aue Ahzsbt - Scoring unit motor: 1.1 kW - Power supply: 400 V / 50 Hz Machine dimensions: - Length: 3300 mm - Width: 1500 mm - Height: 1500 mm - Weight: 800 kg Where can you view our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE You can test the machine on site Financing available via lease or installments WE ORGANISE TRANSPORT jbsmaszyny.pl Tel: 664 335 465 Tel: 530 632 386

Year of construction: 2019, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, travel distance Y-axis: 269 mm, machine/vehicle number: 1111127689, Equipment: sliding door, Hello, the machine is in perfect condition. For more information, please contact me by email. Cutting Capacity (Max): Magnutom 400: ø151 mm / 5.9" 151 x 403 mm / 5.9 x 15.9" 92 x 550 mm / 3.6 x 21.7" PHYSICAL SPECIFICATIONS: Cutting Motor: Continuous Power (S1): 11 kW / 14.7 HP Intermittent Power (S3): 16 kW / 21.5 HP Cut-off Wheels for Magnutom 400: Diameter x Thickness x Bore: 432 x 3.0 x 32 mm / 17 x 0.12 x 1.26" Rotational Speed (at rated load): 1000–1950 rpm Cut-off Wheels for Magnutom 500: Diameter x Thickness x Bore: 508 x 3.5 x 32 mm / 20 x 0.13 x 1.26" Rotational Speed (at rated load): 1000–1850 rpm Positioning & Feed: Cut-off Wheel Positioning Range: Y = 385 mm / 15.16", Z = 235 mm / 9.25" Max. Sample Height Under the Cut-off Wheel: No limitation Max. Positioning Speed: Y = 70 mm/s / 2.75"/s, Z = 50 mm/s / 1.97"/s Feed Speed Range: 0.1 – 10 mm/s / 0.002 – 0.2"/s (adjustable in steps of 0.1 mm/s / 0.002"/s) Cutting Force: 0–1400 N / 10–315 lbf Cutting Table: Fixed Table (Magnutom-400/-500): W x D 827 x 781 mm / 32.56 x 30.75" Optional X-Table: W x D (max): 942 x 781 mm / 37.10 x 30.75" W x D (min): 673 x 781 mm / 26.50 x 30.75" Travel Range (X-axis): 269 mm / 10.6" T-slots, Bi-directional: 12 mm / 0.48" Dimensions and Weight: Width: 1758 mm / 5' 9" Depth: 1463 mm / 4' 9" Height: 1882 mm / 6' 2" Weight: 2400 kg / 5291 lbs Cutting Chamber: Width: 1000 mm / 3' 3" Depth: 1206 mm / 3' 11" Height: 918 mm / 3' 0" Rbjdpfxsyfrucj Ahzst Ambient Conditions: Operating Temperature: 5 – 40 °C / 41 – 104 °F Humidity: 0 – 95% RH, non-condensing

Condition: used, Year of construction: 1995, Serial number: 25060334 Operating voltage: 400 V Frequency: 50 Hz Total power: approx. 3.7 kW Cutting size: Diameter of round workpieces: 250 mm Width x height of rectangular workpieces: 300 x 250 mm Permissible load capacity: Machine weight: 1500 kg Roller conveyor: 1000 kg/m Minimum length of remnant material: 50 mm Minimum workpiece width for detection of missing workpieces: 30 mm Saw blade dimensions: 32 x 0.95 x 3505 mm Speed: 20–80 m/min Hydraulic saw blade control with tension adjustment Rbodsyfpavjpfx Ahzjt Includes documentation, additional saw blades, and various spare parts