Used Atlas 65 for sale (466)

Condition: new, Year of construction: 2022, Equipment: PACE control, ECO mode, HardHat hood made of PE, Xc2003 control system Minimum temperature: -10 °C Dimensions base frame: 4844 x 1807 x 1892 mm (L x W x H) Unload speed: 1500 rpm Rated speed at full load: 1960 rpm Ambient temperature: 45 °C Motor power: 104 kW Flow rate (FAD): 10.9-9.7 m³/min Operating pressure range: 5-14 bar Compressor control flexible pressure and flow control: PACE Engine make / model: John Deere / 4045HI551 Compressed air treatment consisting of: Compressed air aftercooler, water separator and PD filter. Emission level: Stage V Number of cylinders: 4 Kedpfx Afeii U R Dsionc

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Knsdpfjv Rmmmsx Afisc

Condition: new, feed pressure 11 bar intake capacity 480 cm³ Knsdpevkizgefx Afisc volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Knsdpfxoxc Uv Ae Afisc

Condition: new, Year of construction: 2025, Atlas Copco compressor (we are official dealers) new year 2025 with warranty. possibility of combining dryer (available). list price euro 49551 mod ga 37 vod with inverter main features: bar max 10 power 3kw/45hp flow rate liters/min 6900 Kodpfx Aswaz D Refisnc

Condition: excellent (used), functionality: fully functional, We currently have over 15 Atlas Copco GA90 units in stock in various configurations. Frequency-controlled. With integrated dryer. Ksdsxctxispfx Afienc

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Knsdpfoxf Iinsx Afijc

Condition: excellent (used), Year of construction: 2020, Vacuum pump / Vacuum system Airflow: 280 m3/h Motor: 7.5 kW Vacuum tank: 500 L Kjdpfxexcb Ixo Afionc

Condition: new, feed pressure 10 bar Effective free air delivery 252 L/min Receiver capacity 90 l / bar Number of cylinders 1 Stk. motor 400Volt / 1,5KW V / KW turning speeds 777 U/min weight of the machine ca. 70 kg. Kodevkiztepfx Afijnc range L-W-H 0,97 x 0,5 x 0,9 mm

Condition: used, Year of construction: 1999, operating hours: 4,061 h, * · · · ??Liebe Interessenten, ??gerne können Sie uns über WhatsApp kontaktieren: ???.Für Anfragen außerhalb von Deutschland nutzen Sie bitte die internationale Rufnummer: · ? 6569??.Wir freuen uns auf Ihre Nachricht * Atlas 80 * Radlader * Bj. 1999 * 4061 Betriebsstunden * Deutz Motor * BF4L 1011 F * 51,5 KW * Straßen und Arbeitsbeleuchtung * Palettengabel * hydr. SW * 3. Steuerkreis * Reifen 405/70R20 ca. 99% * Rundumlicht Kodsxfdb Hopfx Afijnc * Ersatzteilbuch * Betriebsanleitung * Fahrzeugbrief * Fahrzeugschein * Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp 00496569

Condition: new, Year of construction: 2024, new atlas copco compressor (we are atlas copco dealers), super discounted price. worldwide warranty main features: max bar 10 air flow liters/min 1800 Knsdpfx Aevq N H Aefisc power 15kw/20hp possible to combine atlas dryer on request list price euro 12300

Condition: excellent (used), Year of construction: 2014, operating hours: 25,283 h, functionality: fully functional, Screw compressor Atlas Copco GA90FF. 90 kW with 8.25 bar and 16.48 m3/min. Integrated dryer. Kjdpfjxctmyjx Afijnc

Condition: used, first registration: 03/2012, color: grey-black, Year of construction: 2012, gearing type: other, TITLE: ATLAS PNEUMATIC HOOK-AND-LOOP TRAILER REF: 25R02 YEAR: 03/2012 AXLES: 2 WHEELBASE: 4800 MAXIMUM LENGTH: 9.16 m ITALIAN / FOREIGN: Italy Knedpfxjwq Ey Ro Afioc LOAD CAPACITY 16400 kg - TRAILER: 20000 kg fully loaded TYPE OF EQUIPMENT: hook-and-loop EXTERIOR: ATLAS ADR: yes BODYWORKABILITY FROM: 5.00 m + 0.20 m A: 7.00 m + 0.20 m SUSPENSION: pneumatic BRAKES: disc TYRES: 265/70 R19.5 ACCESSORIES -  4 new brake discs - new brake pads REFURBISHED: yes REFURBISHED: yes TYRES: 30% front, 50% rear PRICE: €17,500.00 + VAT Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialized in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Year of construction: 1995, condition: used, machine/vehicle number: AII 318838, SECOND-HAND SCREW COMPRESSOR ATLAS COPCO GA37 KW 7,5 13 BAR - CE RULES - SN AII 318838 - Year 1995 Knodpfsr Ilrlox Afioc

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 - Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg Kedpfx Ajwrcq Njfijnc

Condition: used, Year of construction: 2016, operating hours: 30,370 h, functionality: limited functionality, machine/vehicle number: API261282, overall weight: 279 kg, power: 15 kW (20.39 HP), volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, The time and date function is defective, which is why we are selling it. Otherwise, the compressor works perfectly. Ksdpfsxdw Tyox Afisnc

Condition: new, Year of construction: 2025, SILENT SCREW COMPRESSOR WITH INTEGRATED DRYER AND 200 LT TANK. LIST PRICE EURO 9940 Knsdowaz I Nopfx Afijc 15 MONTH WARRANTY MAIN FEATURES: BAR MAX 10 POWER 5KW-7.5 HP FLOW LITERS/MIN 888

Condition: excellent (used), Year of construction: 2018, operating hours: 27,910 h, functionality: fully functional, Inspected oil-free screw compressor Atlas Copco ZR160VSDFF. 160 kW. Year of manufacture: 2018. Only 27,910 hours. Full service history. Integrated drum dryer. Frequency controlled. Knjdpfx Aexbh Ddofijc

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: Knjdpfx Afsxbd Raoijc - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Ksdpfx Afeulayxoienc Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Year of construction: 2019, condition: ready for operation (used), Two identical Atlas Copco compressors including dryer and tank are available. 1) 2x compressor Atlas Copco LT3-15CV FF270 400/3/50 CE, year of manufacture: 2019, max. operating pressure: 15bar, air volume flow: 4l/s, motor power: 1.98kW, motor speed: 1500rpm, weight: approx. 200kg. 2) 2x refrigerant dryers Atlas Copco FX 1 (A0), year of manufacture: 2019, max. operating pressure: 16bar, refrigerant: R134a, max. refrigerant pressure: 17bar/10bar, refrigerant charge: 150g, temperature min./max.: 0°C/55°C, weight: approx. 19kg. 3) 2x air receivers. Documentation available. An on-site inspection is possible. Kodpjxddatefx Afijnc

Condition: new, Year of construction: 2025, atlas copco compressor (we are official dealers) with warranty. new and ready for delivery. super silent. possibility of combining external dryer (available). Kedpfxsv Drq Ro Afionc main features: max bar 10 power 11kw / 15 hp air flow liters / min 1500 list price euro 10517

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, Premium screw compressor Atlas Copco GA90+. 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. Ksdpfx Afouqanaoienc With heat recovery, new compressor oil and new oil filters.

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Kjdpfxsulaxzo Afionc Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Kodexdc Uvepfx Afienc