Used Atlas 65 for sale (474)

Condition: ready for operation (used), Year of construction: 2007, 37KW 12.5 bars Iedpfxovr S H Ue Afistn

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, Year of construction: 1991, first registration: 01/1991, Equipment: cable winch, crane, Vehicle location: Bovenden, demountable, emergency stop, grab control, foldable, hydraulic 2-point support, radio remote control, 2x hydraulic extensions, cable winch. Iodpfx Afexdbxasietn Body: Demountable rear crane ATLAS 60.1-6,5/2 (A2) with 2 hydraulic extensions, winch, and grab control. Crane with radio remote control: 2.6 m 2.55 t, 6.4 m 0.9 t, 9.4 m 0.38 t. Approx. €3,000.00 was invested in 2023 for servicing and radio system on the crane! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – = Further Information = Year of manufacture: 2014 Intended use: Construction Itedexcyb Repfx Afijn Contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Itjdpfow U A Hhsx Afien Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: used, Year of construction: 2011, operating hours: 8,100 h, functionality: fully functional, overall weight: 2,532 kg, fuel type: diesel, color: grey, type of output current: three-phase, nominal power (apparent): 150 kVA, total length: 3,500 mm, total width: 1,200 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo 6-Zylinder, type of cooling: air, Manufacturer: Atlas Copco Type: QAS 150 Iodpfx Aewz U T Ijfistn Condition: Very good Engine: Volvo Diesel Power: 150 kVA RPM: 1500 rpm Frequency: 50 Hz Voltage: 230 / 400 V Operating hours: 8,063 h Year of manufacture: 2011 Incl. batteries Incl. diesel tank integrated in the base frame Weight: 2,532 kg The video is from the dealer where the generator was purchased. The photos are our own.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors Itedpfx Afewa Iz Aeien TYPE GA 55 Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, Portable compressor ATLAS COPCO XRHS366, machine with aftercooler, fully serviced Technical specifications: Capacity: 22.2 m3/min; Working pressure: 20 Bar; Year of manufacture: 2013; Engine: DEUTZ 242 kW Itjdpfx Afoxcncveien Hours: 6290 h The compressor is fully operational, ready for work, comes with warranty. Net price: PLN 242,000 Gross price: PLN 297,660 Machine imported in excellent condition. Video links below.

Year of construction: 2020, condition: new, machine/vehicle number: 311345882, Atlas Copco Secoroc DTH drill pipe 102 114mm unused Itjdpfxemwittj Afisn 4x 102mm / L= 5000mm 4x 114mm / L= 6000mm 3x shank adapters 114mm 1x drill bit 140mm Additional information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument Iedow Thykopfx Afijtn XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures - Documentation capability via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SF22+, overall weight: 687 kg, power: 22 kW (29.91 HP), volume flow: 144 m³/h, operating pressure: 8 bar, Atlas Copco compressor SF22+ dryer CD45+ set Oil-free compressed air compressor Pressure: 8 bar Capacity: 2.4 m³/min 22 kW Weight: 687 kg Year of manufacture: 2024 Ijdpfx Afexby H Deietn Unused compressor and dryer set All employees speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (subject to extra charges) (Changes and errors in technical data, information, and pricing as well as prior sale reserved)

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: API793297, overall weight: 1,431 kg, power: 37 kW (50.31 HP), pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, type plate available, BRAND NEW UNUSED Itjdpfxjxbtk No Afion Here we have a rare opportunity to purchase an 100% oil free air cooled variable speed drive twin stage rotary air compressor. Still on the manufacturers pallet from the factory in Belgium Energy efficient VSD machine

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, Year of construction: 2000, first registration: 01/2000, Equipment: central locking, crane, Vehicle location: Bovenden, emergency stop, grab control, 2-point hydraulic outriggers, radio remote control Isdpexbfxlofx Afiotn Superstructure: Atlas AK 90.1 HDS A15 loading crane with radio control Crane has been little used! Load diagram: 6,5m-970kg! Can be extended to 8.0m-780kg for an extra charge. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 2001, operating hours: 70,000 h, overall weight: 5,000 kg, power: 250 kW (339.91 HP), pressure (max.): 10 bar, type of cooling: water, Well-functioning oil-free compressor (also suitable for Spareparts Airend) Iedpfx Afexbdrdjiotn

Condition: good (used), Year of construction: 2000, functionality: fully functional, Pressure: 7.5 bar. Power: 136 kW. Rotational speed: 1488 r/min. Equipped with ATLAS COPCO ER S-4 Energy recovery unit (2012) Iedoxbctmspfx Afijtn

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface Iedpeihfrrsfx Afietn - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Atlas Copco ROTO Synthetic Fluid FOODGRADE 20 liter container Also available in 5 liter containers From stock sale We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement. Ijdovkf A Hopfx Afijtn

Year of construction: 2017, condition: used, Air dryer Weight 128 kg Compressed air pressure 13 max Ambient temperature max 46°C Itodow Da Enspfx Afion

Condition: excellent (used), functionality: fully functional, power: 48.6 kW (66.08 HP), overall weight: 1,400 kg, Year of construction: 2017, operating hours: 1,896 h, ATLAS COPCO COMPRESSOR XATS138 7.00m3 2017 Mobile compressor ATLAS COPCO XATS 138 Iedpexanyijfx Afijtn with aftercooler and WSD80 (water separator) Complete service performed – all filters and fluids replaced. Also equipped with a brand new battery. Technical specifications: Capacity: 5.00–7.00 m3/min; Working pressure: 7–10.3 bar; Year of manufacture: 2017; KUBOTA engine Operating hours: 1896 Compressor fully operational.

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Itsdpfx Ajxbdppefion

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation - Lighting and operating license according to StVZO Itjdpfx Afsud H Tnsien

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Iodpfx Aowrm T Iofijtn

Condition: excellent (used), Year of construction: 2020, operating hours: 41,403 h, functionality: fully functional, Premium screw compressor Atlas Copco GA90VSD+. 90 kW with 13 bar and 18.30 m3/min. Frequency controlled. Year of manufacture 2020 with approximately 41,403 hours. Iedpfx Asw Rlfrsfijtn

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 382 kW (519.37 HP), Description: Screw compressor ZR315VSD Characteristics: Capacity 8.60 bar Power 382 kW Voltage 400 V or 500 V Itjdpfxsvyq Rne Afien Running hours at last maintenance: 7270

Condition: like new (used), Year of construction: 2023, operating hours: 900 h, functionality: fully functional, machine/vehicle number: API929281, overall weight: 876 kg, total length: 1,400 mm, total width: 1,400 mm, total height: 2,300 mm, space requirement length: 3,000 mm, space requirement width: 2,200 mm, space requirement height: 3,500 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 11.3 m³/h, operating pressure: 7 bar, pressure (max.): 13 bar, As-new Atlas Copco compressor GA55 VSD+ Location: Wipro Pari GmbH Am Gewerbepark 4 94121 Salzweg Tel.: +49 160 958 206 70 Itsdpfx Asw U N N Ajfijn

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 24 months, input voltage: 400 V, The dryers in the BD 360+ to 1260+ series are heat-regenerating adsorption dryers that remove moisture from the compressed air via an adsorption process. All dryers in this series are equipped with an innovative Smart Cycle control algorithm as standard. This results in significant energy savings at partial load without the need to add an expensive option. All components are mounted on a common base frame, fully wired and ready for installation, with the vessel and pipework generously sized to minimize pressure drop in the dryer. The dryer can introduce dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured including the following optional extras: - Pressure dew point sensor - Tank insulation - Fan filter New goods with 24 months warranty from date of delivery. Iedpet It N Ssfx Afijtn Optionally also available with installation and commissioning, ex warehouse Wettenberg.