Used Atlas 1504 for sale (457)

Condition: like new (used), power: 242 kW (329.03 HP), fuel type: diesel, overall weight: 24,300 kg, Equipment: Rearview camera / GPS compass Total drilling depth: 252,155 m Borehole navigation system: HNS without base station Hydraulic drifter COP 3060 CR / COPROD 76 (90-105 mm): Impact power: 30 kW / Impact frequency: 50 Hz / Torque: max. 2,450 Nm. Godpfx Agjxqpv Hjbsil Atlas Copco compressor C146-07: Delivery rate: 233 l/s (13.4 m³/min) Pressure: 12.0 bar Water mist system: with 400 L tank Stabilization: Rear hydraulic cylinders Hammer hours: 2,641 h Dust extraction unit DCT: Hydraulically driven Drill feed: Aluminum with chain feed and double hose reel Progressive RCS drilling system including collaring automation: Anti-jamming automation, automatic flushing air monitoring Engine CAT C9.3 Tier 4 final: 242 kW Feed: Automatic positioning / Automatic addition and retrieval of drill rods Rod changer magazine RHS: Automatic, 8 rods, each 4.5 m

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 12 months, input voltage: 400 V, The dryers of the BD 360+ to 1260+ series are heat-regenerated adsorption dryers that remove moisture from compressed air through an adsorption process. All dryers in this series are equipped as standard with an innovative Smart Cycle control algorithm, which leads to significant energy savings during partial load operation without the need to add an expensive option. All components are mounted on a common base frame, fully wired and ready for installation, with generously sized vessels and piping to minimize pressure drop within the dryer. The dryer can deliver dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured, including the following special equipment: - Pressure dew point sensor - Vessel insulation - Blower filter Giedpfxot It N Ss Agbel Brand new with 12-month warranty from date of delivery. Optional installation and commissioning at a very competitive price is available from stock in Wettenberg.

Year of construction: 1999, condition: used, Air dryer Gsdpfxjxqpg Es Agbeil

Condition: excellent (used), Year of construction: 2016, Construction compressor Manufacturer: Atlas Copco Model: XAVS 186 Year of manufacture: 2016 Operating hours: approx. 657 h Godpfx Aswubzregbsil - Delivery pressure: max. 14 bar - Flow rate: max. 11.4 m³/h - Power: 104 kW - Engine: John Deere 4045HAC05 - Aftercooler - Water separator - Weight: approx. 2.45 t

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz Gisdpfx Agsulayxsbel For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle high pressure compressor Gisdjf Hly Sepfx Agbol Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM Compressor can be inspected at any time.

Condition: used, Year of construction: 2018, operating hours: 3,450 h, functionality: fully functional, overall weight: 23,000 kg, For sale here is a Plug & Play Nitrogen Generation Plant (Nitrogen Generator) Brand: AtlasCopco / AirCo Type: PSAL58SN Year: 2018 Serial No.: 2018-21968 Weight: - Temperature range min./max.: +3°C / +45°C Max. pressure: 300 bar Operating voltage: 400 V Installed in a 40" insulated container with supply/exhaust air, winter/summer mode Activated carbon stage Type AK300 Pre-/Post-filter Type AF267UHU Nordpol Cut System Type 100PlusPan 2 x high-pressure compressors, each 15 kW 2 x nitrogen tanks, capacity 500 L / 1,000 liters each Absorption dryer Type A-DRY-105 2 x Filter Type AF85H 6 x 300 bar nitrogen bundles Collection only – disassembly and transport by the buyer or by arrangement If interested or for questions, feel free to send me a message. Additional photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. Gijdpfx Asxvtl Negbsl Net export price For further questions please call Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can handle all customs and registration matters for an additional charge. We can deliver the vehicles to the port for an extra fee.

Condition: new, Year of construction: 2024, functionality: fully functional, Atlas Copco claw vacuum pump DZS400VSD+ (NEW) from 2024. Oil-free, air-cooled, frequency-controlled. Giedpfsxp N Hiex Agbol

Year of construction: 2008, condition: used, Air Blower Giedpfoxqpgxjx Agbsl

Condition: good (used), Year of construction: 2005, Screw compressor Manufacturer: Atlas Copco Type: GA 110 Year of construction: 2005 Operating hours: approx. 54,110 h Power: 115 kw Gsdpjvi Ha Defx Agbjil Pressure max. 7.5 bar

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Gsdeulaxzepfx Agbeil Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: used, Year of construction: 2004, Technical details: feed pressure: 9,75 bar liter capacity: 10,1 l total power requirement: 5,5 kW volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. Gjdpfou Szluox Agbeil *

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Gjdpfx Aexpww Ajgbeil Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: A11 702998, Equipment: type plate available, Compressor unit with pressure vessel, air dryer, and additional accessories Gedexviiwepfx Agbjil

Condition: used, Year of construction: 2006, operating hours: 6,100 h, Equipment: all wheel drive, Ref. No.: B-14 * Wheeled Excavator * Atlas 1505 M / 150W * Year of manufacture: 2006 * Approx. 6,100 operating hours * Blade support * Adjustable boom * Full hydraulic system * Tires in good condition * Buckets available at additional cost * Weight: 18,000 kg * Central lubrication point Trade-in possible Financing from 3.99% Errors and prior sale reserved! The information in this advertisement is non-binding and does not constitute guaranteed properties. The seller accepts no liability for typing or data transmission errors. Listed features require separate verification. All details in the advertisements are non-binding! Delivery throughout Germany available upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment! Giodpfx Agsxvf Trobel

Condition: new, Compressor screw Gijdpfxovi Hbhs Agbol Manufacturer: Atlas Copco Suitable for the following models: GA90, GA110, GA132, GA160, GA180VSD, GA200, GA250 Lightweight Price per piece

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Gedpfx Agexu I A Toboil

Condition: excellent (used), Year of construction: 2016, Mobile compressor ATLAS COPCO XAVS186 ST4 with aftercooler (air dryer), fully serviced! Technical specifications: Capacity: 11.50 m3/min; Giodexu Ibvjpfx Agbol Operating pressure: 14 Bar; Year of manufacture: 2016; Engine: JOHN DEERE; Hours: 2,494 h; The compressor is fully functional, ready for work, with warranty. Net price: PLN 125,500 Gross price: PLN 154,365 The machine is in perfect condition. Below is a link to a video showing the machine in operation.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: A11 702998, Equipment: type plate available, Compressor unit with pressure vessel, air dryer, and additional accessories Godoxvidnspfx Agboil

Condition: used, Year of construction: 2006, operating hours: 6,035 h, Equipment: all wheel drive, Ref-No.: B-13 * Wheeled excavator * Atlas 1305 M * Year of manufacture: 2006 * Approx. 6,035 operating hours * Blade support * Adjustable boom * Full hydraulics * Tyres in good condition * Buckets available at extra cost * Weight: 16,000 kg * SMP quick coupler * Central lubrication point Trade-in possible Financing from 3.99% Errors and prior sale excepted! The details provided in this advertisement are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability for typing or data transmission errors. Listed equipment features must be checked individually. All information in the advertisements is non-binding! Delivery throughout Germany available on request. Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!! Gsdpfx Agsxvf T Ejbsil

Condition: good (used), Year of construction: 1998, Screw compressor Manufacturer: Atlas Copco Godpjvi Ht Defx Agbsil Type: ZR 55 Year of construction: 1998 Power: 53 kW Pressure max. 7.5 bar

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, ATLAS COPCO GX7FF screw compressor with air dryer, machine after service Technical data: Capacity: 940 L/min; Gsdpfsxu H T Rox Agbeil Motor power: 7.5 kW; Pressure: 9.8 bar; Operating hours: 6176 h Year: 2006 Service provided Price: PLN 12,500 net PLN 15,375 gross Below is a link to a video showing the machine in operation.

Condition: used, Year of construction: 2006, operating hours: 5,900 h, Equipment: all wheel drive, Ref-No.: B-15 * Wheeled excavator * Atlas 1305 M * Year of manufacture: 2006 * Approx. 6,035 operating hours * Blade support * Adjustable boom * Full hydraulics * Good tires * Buckets available at extra cost * Weight: 16,000 kg * SMP quick coupler * Central lubrication point Trade-in possible Financing from 3.99% Errors and prior sale excepted! The information in this advertisement is non-binding and does not constitute guaranteed properties. The seller assumes no liability for typographical or data transmission errors. The listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany on request Gjdpfsxvf S Ujx Agbsil Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m., Friday from 9:00 a.m. to 2:00 p.m., and by appointment!

Condition: good (used), Year of construction: 1995, Screw compressor Manufacturer: Atlas Copco Type: XRHS 385 Year of manufacture: 1995 Operating hours: approx. 12,865 h Delivery pressure: 20 bar Gjdpfxsvi Hpls Agbsil Output: 224 kW Engine: OM441LA Weight: 5.8 tons

Condition: used, Year of construction: 2006, operating hours: 5,780 h, Equipment: all wheel drive, Ref. No.: B-16 * Wheeled excavator * Atlas 1605 M * Year of manufacture: 2006 * Approx. 5,780 operating hours * Blade support * Adjustable boom * Full hydraulic system * Tyres in good condition * Buckets available at extra cost * Weight: 18,000 kg * SMP quick coupler * Central lubrication point Trade-in possible Financing from 3.99% Errors and prior sale excepted! The details in this advertisement are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability for typos and data transmission errors. Listed equipment details are to be checked separately. All information in the advertisements is non-binding! Delivery throughout the entire country on request. Gijdpfexvf Tlox Agbel Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!