Used Atlas 1504 for sale (466)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control Kledpfjxbd Rasx Ah Nol - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), Year of construction: 2012, operating hours: 35,741 h, functionality: fully functional, Screw compressor Atlas Copco GA15VSDFF. Integrated dryer and inverter. 15 kW, 13 bar, 2.91 m3/min. Kljdpfsx Igzksx Ah Nel

Condition: ready for operation (used), Atlas Copco PF4000-C-PN-HW control system. 8433 7148 05 SN D 276 108, used, minor signs of wear, 100% functional, scope of delivery as per photos Kledpfxerv Nz Ao Ah Nsl

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software Klodpfx Ahehabk Ds Nel -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system Kjdpfx Ahjb A Sgko Nsll -Dimensions: 660/260/H700 mm -Weight: 18 kg

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. Kjdpfx Asx Hqmneh Nell 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: used, Atlas Copco type RIL-10 balancer/spring balancer for guiding pneumatic hand tools or similar. The spring balancer relieves the operator of the weight of the tool. Min / Max: 1.8 / 4.5 KG Kljdpfx Aowuug Ujh Njl

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm Ksdpfob A Huisx Ah Nell

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Kjdpfxjvx Nmfs Ah Njll Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Forklift is provided.

Condition: used, color: other, Atlas 60.1, 2x Extendable, 2x Extra function Kjdjx Nddljpfx Ah Nell = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 2010, operating hours: 40,084 h, functionality: fully functional, Used screw compressor Atlas Copco GA26FF. 26 kW with 10 bar and 4.16 m3/min. Integrated dryer. New compressor stage installed. Kodpfxsx Eg T Se Ah Nsll

Condition: good (used), Year of construction: 1995, Screw compressor Manufacturer: Atlas Copco Type: XRHS 385 Year of manufacture: 1995 Ksdpfx Ahovi Hplj Noll Operating hours: approx. 12,865 h Delivery pressure: 20 bar Output: 224 kW Engine: OM441LA Weight: 5.8 tons

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Klsdpfjx Ih D Tsx Ah Nsl

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – Klodpfxjx Ig Nho Ah Nel = Further Information = Year of manufacture: 2014 Intended use: Construction Contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2017, ATLAS COPCO XAHS237+ portable compressor with aftercooler, fully serviced Technical data: Capacity: 14.20 m3/min; Working pressure: 12 Bar; Year of manufacture: 2017; Engine: MERCEDES MTU; Operating hours: 4910 h; Kledpfx Aox Iffhoh Nsl Compressor is fully operational, ready to work, with warranty Net price: 175,500 PLN Gross price: 215,865 PLN Machine imported in excellent condition

Condition: new, Year of construction: 2023, functionality: fully functional, pressure (max.): 12.75 bar, ATLAS COPCO AIR COMPRESSOR Klsdpfxsw S Nuts Ah Nel NEW, NOT USED

Condition: ready for operation (used), Year of construction: 2003, operating hours: 56,214 h, functionality: fully functional, overall weight: 830 kg, Equipment: CE marking, For sale: compressor after complete overhaul and service, 100% oil-free, fully functional, used in a pharmaceutical facility. Inspection and replacement of oil and filters were carried out in October 2025. We provide a 3-month start-up warranty within Poland. For more details, please contact us by phone or email. Kedsx Ib Ncspfx Ah Nell

Condition: used, Year of construction: 2022, operating hours: 2,654 h, functionality: fully functional, machine/vehicle number: ITJ618556, overall weight: 403 kg, operating pressure: 9 bar, pressure (max.): 9.75 bar, We are offering a compressor with accessories for sale. It is in excellent visual condition and has 2,654 operating hours. Klsdpextpmdofx Ah Njl

Condition: good (used), Year of construction: 2012, 2 Atlas Copco ZS75+ VSD compressors 86.5 kW Oil-free Ksdpsx A In Eofx Ah Njll Year: 2012 Price: €12,500 each

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKE000052, total length: 1,070 mm, total width: 1,200 mm, total height: 1,960 mm, cooling capacity: 27.82 kW (37.82 HP), The TCX4-90A series from Atlas Copco is a compact all-in-one chiller with an air-cooled condenser with integrated hydro module. The TCX28A chiller is specially designed for cooling water (or a mixture of water and glycol) for a wide range of industrial processes. Klodpetq Twnjfx Ah Nel Atlas Copco chiller TCX 28 A (indoor installation / +5°C) with integrated tank and 3 bar pump group Cooling capacity: 27.8 kW (37.2 kW) Absorbed power: 9.35 kW (9.33 kW) Water connection 2" Dimensions: 1067x1200x1960 mm lxwxh Used machine from year of construction 2022, very good condition, fully functional, without warranty

Condition: excellent (used), Year of construction: 2008, operating hours: 54,551 h, functionality: fully functional, Used oil-free compressor Atlas Copco ZR160VSD, 160 kW with inverter. 10.4 bar, 25.90 m³/min. Year of manufacture: 2008. Kodpfox A E Eujx Ah Noll

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Kjdpfx Ahorp D Uxj Nell Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), volume flow: 1.56 m³/h, noise level: 65 dB, Equipment: documentation/manual, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Klsdpsrn S Hpjfx Ah Nel Last service: September 20, 2002.3. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: new, Compressor screw Manufacturer: Atlas Copco Suitable for the following models: GA90, GA110, GA132, GA160, GA180VSD, GA200, GA250 Lightweight Kljdsvi Hbhopfx Ah Nsl Price per piece

Condition: excellent (used), Year of construction: 2017, Oil-free compressor ATLAS COPCO ZT90VSDFF, machine with inverter and air dryer. Technical specifications: Kljdpfx Aoxu Hkveh Nel Capacity: 13.02 m³/min; Motor power: 101 kW; Pressure: 10.2 bar; Operating hours: 15,849 h Year: 2017 We provide service. Price: PLN 87,500 net PLN 107,625 gross Below is a link to a video showing the machine in operation.