Screw compressor

Atlas Copco, Kaeser, Boge, Compair GA5-250, BSD72-SK26

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Redpfxoqabiae Acdocb Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: good (used), Year of construction: 2007, table length: 800 mm, table width: 800 mm, Equipment: CE marking, documentation/manual, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control system: Fanuc 18 imb + Mapps 2 Year of manufacture: 2007 TECHNICAL DATA: Travel ranges: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse rate (X/Y/Z): 50 m/min. Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Number of tool positions: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (L x W x H): 9,200 x 4,900 x 3,920 m Rodsv Nhylspfx Acdjcb Equipment features: Internal coolant system (ICS): bar Chip conveyor High-pressure pumps

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm Rcedecblc Sopfx Acdjb face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: used, Refrigerant compressors system Bitzer -Type: 4EC-4.2Y-40S (x3), 4EC-6.2Y-40S (x3) -Volume: 22.7 m3/h (x6) -Cooling capacity for R404A: 90.5 kW at -5°C/40°C, 73.8 kW at -10°C/40°C, 42.4 kW at -25°C/40°C -Dimensions: 1900 x 800 x 1800 mm -Items in magazine: 1 -Reference number: Z116 Redpfew Raz Isx Acdjcb -Condition: Used in very good condition, ready to work

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Rcedpfx Acsu Rptyedob Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] Rcedpfx Acouha Umsdeb - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

Year of construction: 2014, condition: good (used), For sale is a Nilfisk compact safety industrial vacuum cleaner type CTS40 M Z22 400 C 4 kW 9 A 50 Hz 114 kg Ex-proof The vacuum cleaner is in good condition and ready for immediate use Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website Rcodpfx Acshu Sf Hodeb

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm Rcedowglnyopfx Acdob tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: used, Year of construction: 2006, operating hours: 14,754 h, Equipment: all wheel drive, Atlas Terex 1905 Year of construction: 2006 Engine power: 114 KW Rcodpfx Acotplq Iedob hammer piping, air conditioning, quick coupler

Condition: like new (used), GA (W) VSDs (Variable Speed Drive) are single-stage, oil-injected, electric motor-driven, stationary screw compressors. The cooling system is equipped with an air cooler and an oil cooler. GA VSD are air-cooled compressors; cooling air is provided by a fan. Main features: - Maximum air inlet temperature: 40°C. - Maximum cooling water outlet temperature: 50°C - Temperature of the air leaving the outlet valve approx.: 30°C Rjdpfewxwxzox Acdjcb - Approximate oil capacity: 17.9 L