Used At 125 Mini for sale (14,857)

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Type: Speedlock P90 (Silverline) Included in delivery are: 01x pallet rack traverse, used material color: sendz. galvanized Type of truss: 125|17 I - profile: 125 x 50 mm agraffe: 5 HK (hooks) clear width: 3.000 mm max. load per truss pair 2.400 kg, with evenly distributed load The bay loads are only valid in connection with prop P90/20. In addition, depending on the bay load and the suspension heights, the load capacity of the hook block must also be checked. must be checked. 02x safety pins, used Execution: compl. galvanized To secure the side members Bjdpfji E Tb Iox Ab Tjdk against unintentional lifting out

Condition: good (used), functionality: fully functional, load capacity: 125 kg, Hebelift lift2move 125 2 units available, each with 2 batteries Bjdpfxexyzwbj Ab Tsdk

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm Bjdpjxw Rdfofx Ab Tedk - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: new, functionality: fully functional, Universal centre lathe ŠKODA SRM 125 - 4000 after modernization of the mechanical part of the machine. The electrical part is equipped with Siemens CNC control: SIEMENS SINUMERIK 828D with SINAMICS drives. Technical data: Maximum swing over bed: 1,250 mm Maximum swing over carriage: 900 mm Maximum distance between centres: 4,000 mm Maximum workpiece weight: 14,000 kg Maximum torque: 34,000 Nm Minimum turning diameter: 200 mm Bed height: 620 mm Bed width: 1,100 mm Spindle nose: No. 10 Number of speed ranges (infinitely variable in each range): 3 Spindle speed range: 1.4 – 350 rpm Main spindle drive motor: 39 kW, fixed gear ratio 1:3 Maximum workpiece diameter in jaws: 1,030 mm Spindle centre taper: 80 mm – 1:10 Centre height above bed: 630 mm Carriage: Feed rate (Z and X axes): 2,000 mm/min Rapid traverse (Z axis): 6,000 mm/min Bedpfxexyxdxj Ab Tjdk Rapid traverse (X axis): 3,000 mm/min Traverse motor (Z axis): Siemens 1FK7 101, 27 Nm, with planetary gearbox Traverse motor (X axis): Siemens 1FK7 060, 6 Nm, with planetary gearbox Maximum tool section: 70 × 70 mm Maximum tool section for turret head: 50 × 50 mm Tailstock: Quill stroke: 200 mm Tailstock centre taper: 80 mm, 1:10 Tailstock feed rate: 2,000 mm/min

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: A98908136P322180001, overall weight: 130 kg, total length: 800 mm, total width: 440 mm, total height: 620 mm, volume flow: 124 m³/h, final pressure: 16 bar, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 6 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,450 rpm, delivery head: 7,000 mm, The heating pump TP 125-80/4... is brand new from the factory. The pump is still in its original packaging. The appropriate documentation is included with the pump. Bdjdpoxywmfofx Ab Tjk

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -0,7 MM Bsdpfx Ashwztwjb Tsdk DEVICE WEIGHT 125 KG.

Condition: good (used), We offer here 4 transport rollers for sale. Included in delivery are: 04x fixed castors, used Manufacturer: Wicke Material color castor: cream white material color frame: sendz. galvanized Technical data: Bdsdpfxehunuis Ab Tjk Total height: approx. 150 mm Rollers Ø: approx. 125 mm roll width: approx. 40 mm Roll material: polyamide plate dim.: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,745 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance.

Condition: used, power: 20 kW (27.19 HP), fuel tank capacity: 40 l, lifting height: 3,210 mm, Year of construction: 2019, operating hours: 2,380 h, Year of manufacture: 2019 Empty weight: 3.200 kg Dimensions (LxBxH): 429 x 165 x 243 cm Engine type: Perkins Perkins 403D-15 Track width: 30 cm Digging depth: 3.119 m Bdjdpfjup Hcbex Ab Tok

Condition: used, Year of construction: 2009, operating hours: 2,050 h, Drive: Track Serial number: 235xxxx Please contact ATS Norway for more information Bodpfx Abexw Nk Rs Tedk Please provide reference number upon request: 21796 Specifications: Model year: 2009 Hours: approx. 2050 Weight: 1650 kg Power: 11.8 kW Undercarriage (see photos) Rubber tracks Grading bucket S30 quick coupler Track width: approx. 24 cm Machine width: approx. 125 cm Adjustable tracks Blade Cabin Extra hoses included Description:Kubota U17 mini excavator from 2009, specially built for helicopter transport. Tools for disassembly and reassembly are included.The machine has adjustable tracks, 125 cm at the widest.Cabin included.Can be delivered on short notice. Hours: 2050 Own weight: 1650 Length: 125 Kw: 11.8 Model: U17-3a Beltegraver m/ pusseskuffe. Spesialbygd for flytting med hellikopter.

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Bdedpfxektm N De Ab Tek

Condition: like new (used), functionality: fully functional, power: 18 kW (24.47 HP), fuel type: diesel, overall weight: 3,600 kg, Year of construction: 2022, operating hours: 234 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, SANY SY35U MINI EXCAVATOR Year of construction: 2022 Operating hours: 234 Engine: Yanmar 3TNV88F Power: 18KW/25PS Own weight: 3855 KG Transport dimensions (LxWxH): 4915mm x 1720mm x 2515mm Rubber tracks 300mm to 90% good 3. hydr. control circuits Dozer blade Rotating beacon Reversing camera Refueling pump AM-FM radio Bdsdpou Nadtjfx Ab Tok Sun blinds on front and side windows Floor mat Suspension seat cup holder LED headlights Including mechanical quick coupler MS03

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: ZGDS-125, working width: 1,250 mm, bending angle (max.): 165 °, sheet thickness steel (max.): 7 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 130 kg, total length: 1,600 mm, total height: 1,100 mm, warranty duration: 24 months, product length (max.): 1,250 mm, stroke length: 100 mm, The segmented sheet metal bending machine, also popularly known as a segmenter, is used to make complex profiles and bends impossible to make with a classic roofing bender. The segmented design of the beams gives a wide range of possibilities for bending even the most advanced flashings. We offer segment bending machines in three working lengths. Our segmented sheet metal benders are created with roofers in mind, used for standing seam flashings, as well as for bending KARO tiles. In the ZGDS series of segmented sheet metal bending machines, all three rows of stones, i.e. the pressure bar, bending bar, as well as the fixed bar, are removable and adjustable. SEGMENTED SHEET METAL BENDING MACHINE Ju9fautx MODEL ZGDS-1125 WORKING LENGTH 1250MM ALL THREE ROWS OF REMOVABLE ADJUSTABLE STONES MAXIMUM THICKNESS OF BENT STEEL SHEET -0.7 MM Bjdpfx Abjrnmv Dj Tedk WEIGHT OF THE MACHINE 125 KG.

Condition: good (used), Current stock: approx. 350 pcs. Included in delivery: 01x fixed castor, used material color castor: black Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 37.5 mm Bdodpfx Abshmuyao Tek Roll material: solid rubber Material rim: polypropylene plate dim.: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,803 kg

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Payload at full radius 125KG / 0.125to payload Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Bdodpfxoty Swtj Ab Tsk Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: used, Year of construction: 2015, operating hours: 1,300 h, Drive: Track Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21795 Specifications: Model year: 2015 Hours: approx. 1300 Weight: 1700 kg Power: 11.8 kW Undercarriage (see photos) Rubber tracks Grading bucket Digging bucket Trenching bucket Bucket with opening bottom Ripper Grab S30 quick coupler Track width: approx. 24 cm Bdodpfx Aexw Nkwob Tek Machine width: approx. 125 cm Adjustable tracks Blade Cabin Description:Kubota U17 mini excavator specially built for transport by helicopter. Tools for disassembly and reassembly are included.The excavator comes with 4 buckets, ripper, and grab. A hydraulic hammer can be included at an additional cost.It has adjustable tracks, 125 cm at the widest.Can be delivered on short notice.See video. Hours: 1300 Own weight: 1700 Kw: 11.8 Model: U17-3a Beltegraver m/ 4 skuffer, ripper og klo SE VIDEO

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Bdjdpfxsmr Hpce Ab Tjk Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Bdsdpfxju Ebt Uo Ab Tok Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -0,7 MM DEVICE WEIGHT 125 KG. Bdodpfxjhy El Se Ab Tsk

Condition: good (used), Current stock: approx. 140 pcs. Included in delivery: 01x swivel castor, used Manufacturer: Wicke Type: L03 Material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 40 mm Tire material: PA6 plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,837 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. Bdodpjhmuytofx Ab Tjk General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Bjdpfjty Swyex Ab Tedk Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Bdodju Ebufopfx Ab Tok Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2024, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM Bedpfjiwdi Dsx Ab Tsdk ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -0,7 MM DEVICE WEIGHT 125 KG.

Condition: good (used), Current stock: approx. 965 pcs. Included in delivery: 01x swivel castor, used Manufacturer: Kama Material color castor: red Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 34 mm Bearing: needle bearing Roller material: rubber plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 55 mm (center - center hole) Weight / pcs: approx. 0,970 kg General information about the article: This item is offered for pickup only. A transport desired beyond that Bodpfehmuyzjx Ab Tsdk or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Bedpfx Aoi E S Eyeb Tjdk Type: Speedlock P90 (Silverline) Included in delivery are: 01x pallet rack traverse, used Material color: orange Type of truss: 125|17 I - profile: 125 x 50 mm agraffe: 5 HK (hooks) clear width: 3.000 mm max. load per truss pair 2.400 kg, with evenly distributed load The shelf loads only apply in conjunction with prop P90/20. In addition, the load-bearing capacity of the hook plate must also be checked as a function of the bay load and the suspension heights. 02x safety pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Bjdpfxsi E Tbvs Ab Tjdk Type: Speedlock P90 (Silverline) Included in delivery are: 01x pallet rack traverse, used material color: sendz. galvanized Type of truss: 125|14 I - profile: 125 x 50 mm agraffe: 5 HK (hooks) clear width: 3.000 mm max. load per truss pair 2.100 kg, with evenly distributed load The bay loads are only valid in connection with prop P90/20. In addition, depending on the bay load and the suspension heights, the load capacity of the hook block must also be checked. must be checked. 02x safety pins, used Execution: compl. galvanized To secure the side members against unintentional lifting out