Used Assembly Accessories for sale (25,324)

Condition: good (used), 100.000L steel tank. Fire / drinking water underground or above-ground Dimensions 16.9 x 3.10m wall thickness: 5mm weight 8mm approx. 12t, weight 5mm approx. 9t. The tanks are sandblasted by us, equipped and then painted internally and externally with a corrosion-resistant epoxy resin coating. As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch. For an additional fee, we install a float valve and a manhole chimney We can weld additional accessories, e.g. a platform. We have tanks with and without beds. Steel beds for PLN 1800€ net. The tanks have a tightness certificate and a declaration of conformity. Giodpodbllzefx Ag Rou We offer delivery to the customer.

Year of construction: 2021, condition: used, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Gjdpozc N H Djfx Ag Roiu Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) Gjdpfx Ajzc N Axeg Rsiu 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: new, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) Giodpfxovu Hfde Ag Rsu 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Driving device with flanged rollers RU-DKFA and RU-4SSP 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- (technical data according to manufacturer - no guarantee!)

Condition: good (used), Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Gsdpfx Agjzcqxne Roiu Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Condition: excellent (used), Assembly frame with rubber support Manufacturer: EDER + MÜLLER Height adjustable: 800 - 950 mm Work surface size: 1800 - 2800 mm diagonal Weight: 60 kg Godpfx Ajzcqqqsg Reiu Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. Gsdpfxewv Tqbo Ag Rsiu - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Year of construction: 2012, condition: used, Used equipment Year of manufacture: 2012 Giedpsx H U Nysfx Ag Rou Device for easy assembly of drawers Availability: short-term Location: Flörsheim

Condition: new, Work and Assembly Table New Machine Year of Manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made from selected, solid red beechwood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise keys: - Front vise made of solid cast iron/steel construction - Rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Top thickness: 120 / 60 mm Giodpfxjkwhwzj Ag Reu Usable lift: 300 mm ErgoPlan height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg An attached cover on the rear side serves as protection against shearing and as a pinching guard. The lifting unit is concealed in the left lifting column and thus protected from dirt and damage. Load capacity up to 400 kg Maximum overall height: 1,080 mm 2 ErgoPlan bench hooks, consisting of aluminum round bench hooks with ball locking mechanism, 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing bolt, adjustable up to 200 mm workpiece thickness, 360° swivelling Availability: short-term Location: Flörsheim

Condition: new, Work and assembly table Worktop made of solid sheet metal equipped with high-quality workbench (can be removed using screws) Easy back-friendly work thanks to height adjustment using a foot pedal Perfectly aligned using the 4 adjustable feet, very easily using an Allen key Continuous height adjustment and 3 fixed working heights Giedpevymfhjfx Ag Rsu Optimal handling thanks to 4 swivel castors with parking brake Regional quality From conviction - 5 year guarantee Load capacity 300 kg Height 400 - 1010 mm Worktop length 1485 mm Worktop 1700 x 790 mm Useful stroke 610 mm Weight 140 kg Front pliers 520 x 70/190 mm (size/span) Side pliers 460x140/145 mm (size/span) Availability: short term Storage location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 22,000 kg, empty load weight: 3,165 kg, construction width: 6,000 mm, Accessories Load center: 750 Mast type: None Condition: Ready for use and fully functional Gedpfxeu Dz R Ds Ag Rjiu Technical condition: Very good Description: 2x forks: 250 x 80 x 2 400 mm

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 3,300 kg, empty load weight: 795 kg, Accessories Load center: 600 Mast type: None Gedpfou Dzrhox Ag Rjiu Condition: Ready for use and fully functional Technical condition: Very good Description: In addition to this Luck model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this LASTSTABILISATOR , The Load Stabiliser P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2006, empty load weight: 2,090 kg, construction width: 1,500 mm, Accessories Mast type: None Giodpfx Agsu Dzm Eo Rou Condition: Ready for use and fully functional Technical condition: very good Description: Cross-section: approx. 800 mm - 2 400 mm

Condition: used, functionality: fully functional, load capacity: 10,000 kg, empty load weight: 1,250 kg, Accessories Gjdpou Dzbvofx Ag Rsiu Load center: 600 Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 2800 mm Diameter: 270 mm

Condition: used, functionality: fully functional, load capacity: 12,000 kg, Accessories Mast type: None Condition: Ready for use and fully functional Gijdju Dzg Eopfx Ag Rsu Technical condition: Very good Description: Length: 1450 mm Diameter: 250 mm

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 3,500 kg, fork length: 1,400 mm, empty load weight: 980 kg, total length: 6,000 mm, Accessories Load center: 700 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Giodpfou Dy I Ijx Ag Rsu Condition: Ready for use and fully functional Technical condition: Very good Description: Length 6000 mm, 2 forks 150 x 60 x 1400 mm

Condition: used, functionality: fully functional, Year of construction: 2001, empty load weight: 500 kg, total length: 5,090 mm, fork length: 1,600 mm, load capacity: 3,300 kg, Accessories Load center: 700 Fork width: 100 mm Fork thickness: 50 mm Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 4,990 mm; Fork: 100 x 50 x 1600, 2 folding forks; 2 forks with open/close function Length: 4,990 mm; Fork: 100 x 50 x 1600, 2 folding forks; 2 forks with open/close function Giedpfx Agjwkk Ade Rsu

Condition: good (used), functionality: fully functional, Internal article number: 26047 Universal milling machine Thiel Duplex 158 + Accessories (Various tool holders, including various MK4 holders (reduction from basic holder to MK4 available)) + 2-axis digital display Heidenhain Gedpjzb I Nzsfx Ag Roiu + Operating manual + Coolant pump Speed: 90 - 1800 RPM Travel: X 400 / Y 200 / Z 400 mm Feed rate: 10 - 160 mm/min Rapid traverse: 900 mm/min Power: 1.6 kW / 380 V L x W x H: 150 x 150 x 175 cm Weight: 1300 kg The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which covers an area of over 500 m².

Condition: new, Spare parts Giedpfeyyhcajx Ag Reu we have many spare parts in stock hydraulic cylinders and many mechanical spare parts spare parts and accessories Glue application with comb Contactless PUR glue application

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke Gsdezbvm Ijpfx Ag Reiu - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A output 15 kw operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Gisdpfx Aezbvmhsg Reu Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Giodpfx Agewric Eo Rsu

Condition: used, This listing is for QIAGEN QIAxcel Advanced DNA Analyzer plus Accessories. The unit is in full working condition and ready for immediate use. Godpfx Aoxzgy Deg Rjiu This automated capillary electrophoresis system replaces traditional gel electrophoresis for fast, high-resolution DNA and RNA analysis of up to 96 samples • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: ready for operation (used), Production line for cell stacks for 48 V hybrid vehicle batteries Aumann production line for cell stacks for 48 V batteries of the 2nd generation – manufactured in 2023, little used. Assembly – testing – installation of cell stacks into housings for hybrid vehicles. Manufactured in 2023 and little used. Some units are assembled, others are in their original delivery condition. Maximum Battery Size Size: 363 × 175 × 140 mm Maximum Capacity Standard/Performance – 8 Ah / 17.5 Ah The system consists of 7 units that are linked together. 2 images are provided for each system/unit – a separate handout is available for each. Please provide us with your offer price! Technical data can be found in the handout. Any warranty claims are excluded. Godpfx Agjzavwdo Roiu We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 747895.1, overall weight: 174 kg, For robot use. Pressing force: 55 kN Total stroke: 98 mm Power stroke: 7 mm The Tox Pressotechnik TZ 05.747895 is a hydropneumatic clinching pliers developed for precise and reliable joints in sheet metal processing. Giedpfx Agjvb Icds Rou With its innovative technology, it enables the efficient joining of metal parts without additional materials such as welding rod or adhesives. The pliers offer high force transmission and ensure consistent results, even with complex geometries. Thanks to its ergonomic design and user-friendly handling, it is ideal for use in series production as well as in single-part production. The robust design ensures durability and ease of maintenance, while the compact size allows flexible integration into existing production lines.