Used Asphalt Technology for sale (23,809)

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, New PCB cleaning machine from AAT. CE certified for European market use, manufactured in the US. All machines come with 12 months warranty! Ppodsvzrhqepfx Ahzol CHEMISTRY TYPE: Water OR Semi-Aqueous Cleaning Chemistries SYSTEM CAPABILITIES: 12” Conveyor Belt Includes 12” On load/Off load Progressive Energy Dynamic Spray Bars (PED) High Speed Cleaning (0.5 to 3.0 FPM) Coherent Jet Spray Bars Reach Under Low-Profile Components Air Knife Isolation for Low Chemistry Consumption HEPA Dry Air Filtration Integrated DI Closed Loop System “GREEN” Zero Discharge to Drain (except during maintenance) Low Power Consumption Automatic Chemical Management System Integrated Internal LED Lighting Color Touch Screen Interface Tool Specifications: Footprint: 8’ 0” X 3’ 8” X 4’ 2” (2.44m x 1.15m x 1.28m) Electrical: 480V, 50/60Hz, 100AMPs, 3 Phase Weight: 2500 lb (1134 kg) Quiet Operation:

Condition: new, Year of construction: 2025, warranty duration: 12 months, New Stencil cleaning machine from AAT. CE certified for European market use, manufactured in the US. All machines come with 12 months warranty! X30TM & X40TM Series Stencil / Misprint / PCB Cleaner CHEMISTRY TYPE: X30TM and X40TM models are available for flammable and combustible solvents/chemistries as well as aqueous based chemistries. SYSTEM CAPABILITIES: Stencil / Misprint / PCB Defluxing All In One System The X-Series system is designed around counter-rotating blind hole high energy spray bars. The added pressure allows the system to successfully clean fine pitch stencils, low stand-off components, misprinted throughhole, blind assemblies, and the ability to remove uncured glues and adhesives, yet gentle enough to use on frameless and foil stencils. Independent Wash and Rinse Holding Tanks The system features two independent holding tanks, which allow for lower water use. Final DI water rinse (if selected) displaces spent rinse water in the rinse tank throughout the rinse operation. This provides for higher tank cleanliness, and component cleanliness. Large Process Chamber Dimensions X-30TM Series Process Reservoir: 30” x 30” x 3” (76.2 cm x 76.2 cm x 7.62 cm) X-40TM Series Process Reservoir: 40” x 40” x 3” (101.6 cm x 101.6 cm x 7.62 cm) Conforms with NFPA 70, NFPA 79, IES, NEMA 1, NFPA 13, OSHA Tool Specifications: X30ATM Footprint: 48.5” W X 44” D X (59” to 90”) H (123.19 cm x 111.76 cm x (149.86 cm to 228.6 cm) X40ATM Footprint: 58.5” W X 44” D X (59” to 90”) H (148.59 cm x 111.76 cm x (149.86 cm to 228.6 cm) Electrical: 220V, 60Hz, 20AMPs, 3 Phase X30ATM Weight: 500 lb (227 kg) X40ATM Weight: 700 lb (318 kg) Psdjvzrklopfx Ahzepl Ask for additional information to find the best configuration for Your needs!

Condition: used, Year of construction: 2018, Operational unit! Pedswctqbopfx Ahzepl Ask for additional information!

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 8,865 mm, total height: 3,500 mm, total width: 8,322 mm, overall weight: 11,700 kg, power: 52 kW (70.70 HP), MF-4530 is a full-automatic intelligent box making machine with double stations, good for high-speed large-sized mass production of various box types, such as mobile phone boxes, jewelry boxes, cosmetic boxes, watch boxes, etc. The range of making boxes is larger, which can better meet the needs of the modern packaging market. The appearance of the whole machine has been newly designed, which is safer and more beautiful. This machine adopts servo control system and image positioning system to realize automatic completion of paper feeding, gluing, gray board feeding, four corner pasting, positioning, box holding, edge wrapping, ear folding and folding forming. Driven by well-known brand servos for feeder, gluing and conveyor belts, it can be continuously variable, high precise, easy to adjust, and saves time; For the corner sticking part, different lengths of tapes can be pasted in stages as needed; The positioning part adopts the image positioning system and the robot grabbing parts, largely improve the positioning accuracy and efficiency, the error range Ppedpjwb Sd Refx Ahzol can reach ±0.1mm, and the positioning and debugging speed is faster; The forming machine adopts THK linear guide rail and virtual electronic drive, which is more stable, wear-resistant and more precise. It is smooth, and the size range of folding depth and folding ear length is also larger.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 6,850 mm, total height: 3,500 mm, total width: 4,600 mm, overall weight: 7,100 kg, power: 35 kW (47.59 HP), MF-6040A is a full-automatic intelligent box making machine with double stations, good for high-speed large-sized mass production of various box types, such as mobile phone boxes, jewelry boxes, cosmetic boxes, watch boxes, etc. The range of making boxes is larger, which can better meet the needs of the modern packaging market. The appearance of the whole machine has been newly designed, which is safer and more beautiful. This machine adopts servo control system and image positioning system to realize automatic completion of paper feeding, gluing, gray board feeding, four Ppsdpfjwb Sf Isx Ahzsl corner pasting, positioning, box holding, edge wrapping, ear folding and folding forming. Driven by well-known brand servos for feeder, gluing and conveyor belts, it can be continuously variable, high precise, easy to adjust, and saves time; For the corner sticking part, different length of tapes can be pasted in stages as needed; The positioning part adopts the image positioning system and the robot grabbing parts, largely improve the positioning accuracy and efficiency, the error range can reach ±0.1mm, and the positioning and debugging speed is faster; The forming machine adopts THK linear guide rail and virtual electronic drive, which is more stable, wear-resistant and more precise. It is smooth, and the size range of folding depth and folding ear length is also larger.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 8,735 mm, total height: 3,300 mm, total width: 5,795 mm, power: 40 kW (54.38 HP), MF-3626B is a full-automatic intelligent box making machine with double stations, good for high-speed large-sized mass production of various box types, such as mobile phone boxes, jewelry boxes, cosmetic boxes, watch boxes, etc. The range of making boxes is larger, which can better meet the needs of the modern packaging market. The appearance of the whole machine has been newly designed, which is safer and more beautiful. This machine adopts servo control system and image positioning system to realize automatic completion of paper feeding, gluing, gray board feeding, four corner pasting, positioning, box holding, edge wrapping, ear folding and folding forming. Driven by well-known brand servos for feeder, gluing and conveyor belts, it can be continuously variable, high precise, easy to adjust, and saves time; For the corner sticking part, different length of tapes can be pasted in stages as needed; The positioning part adopts the image positioning system and the robot grabbing parts, largely improve the positioning accuracy and efficiency, the error range can reach ±0.1mm, and the positioning and debugging speed is faster; The forming machine Ppodpowb Sfusfx Ahzjl adopts THK linear guide rail and virtual electronic drive, which is more stable, wear-resistant and more precise. It is smooth, and the size range of folding depth and folding ear length is also larger.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 8,060 mm, total height: 1,963 mm, total width: 3,191 mm, overall weight: 3,000 kg, power: 12 kW (16.32 HP), . Ppsdpowb Sgrsfx Ahzol MF-620S is a high-speed fully automatic gluing and positioning line. It is suitable for mass production of various box types, such as hand Machine boxes, jewelry boxes, cosmetic boxes, watch boxes, etc. The scope of making boxes is wider and can better meet the needs of the modern packaging market. The appearance of the whole machine has been completely redesigned, making it safer and more beautiful.

Condition: like new (used), Year of construction: 2024, operating hours: 120 h, functionality: fully functional, total length: 4,350 mm, total width: 4,900 mm, total height: 1,880 mm, power: 30 kW (40.79 HP), 1. Main control: Weikoda PLC and human-machine interface, with automatic stop when counting meters, automatic detection of remaining quantity, and automatic speed regulation of line speed. 2.Winding tension: It adopts independent motor and PLC for follow-up control, with pre-tension system. The tension is automatically controlled by servo motor, constant Podpfswd Ig Hox Ahzopl tension and taper tension. 3. Unwinding: Adopt one-piece three/six-inch universal shaftless loading and unloading, hydraulic lifting. 4. Correction system: Adopt domestic famous and high-quality correction device for edge control. 5. Traction: Large diameter precision traction steel roller, surface plasma treatment, dynamic and static balance, roller cylindricality ÿ±0.02mm, runout ÿ0.02. Pressure roller wear-resistant rubber wheel NBR Shore hardness 60~65°. 6. Cutting: The bottom knife is a ÿ105 diameter bottom knife, which adopts automatic knife arrangement, and the upper knife is a ÿ105 circular knife. 7. Low-voltage electrical appliances and pneumatic components: using imported original parts such as AirTac and Schneider.

Condition: like new (used), Year of construction: 2024, operating hours: 1,200 h, functionality: fully functional, overall weight: 3,500 kg, total height: 1,660 mm, total length: 3,300 mm, total width: 1,450 mm, Equipment features: Intermittent flat die cutting device 1. Servo drive, heavy duty frame, high precision. 2. The die-cutting speed can reach 80 meters/minute. 3. Stable material pulling. Scope of application: various self-adhesive labels for daily chemicals, wine labels, food, cosmetics, medicine, electronics, etc. Applicable materials: molded paper, coated paper, tin foil, PET, PVC, PP, laser paper, kraft paper, glossy paper, diffusion paper, laminated copper foil, photoelectric film, conductive film, PC version of software, LCD conductive adhesive, EMI insulation material, foam, conductive foam Psdpfx Ahswd Ik Eszepl

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 880 mm, total width: 540 mm, total height: 1,460 mm, overall weight: 210 kg, input voltage: 230 V, power: 2 kW (2.72 HP), input frequency: 5,060 Hz, Capacity: 60 single ties/min Ppodpfx Ahewzk A Sezel

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information Ppedpfx Aeh D H Rcehzel

Year of construction: 2022, condition: new, ZLOMIARZE Recycling Technology - LRK Recycling line The Mini Line is a high quality set of devices designed for the recycling process. Shredding and separation are essentials in this business, that’s why Mills from TORNADO series was designed for rapid reaction on feeding materials with being in a chamber for short time. Suitable sieves placement and balanced cutting rotor RPM provide uniform material fraction. Innovated implementation of water system with adjustable pressure in the Wet Separators GOLD RIVER series provides highly accurate separation of difficult materials. ❖LRK - 50 The set consists: • 11kW Grinding Mill – Tornado 400 • Compact Dust collector • Transport Conveyor • Wet Separator – Gold River 300/1250 Technical Specification: • Complete Set Power – 13 kW • Supply – 400 V ; 50 Hz • Performance – 50 kg/h (this is a real value, checked on basic materials). • Dimensions – 3500 × 600 × 1950 mm • Weight – 950 kg ----- ❖LRK - 100 The set consists: • 15kW Grinding Mill – Tornado 500 • Compact Dust collector • Belt Conveyor • Wet Separator – Gold River 500/1250 Technical Specification: • Complete Set Power – 20,2 kW • Supply – 400V ; 50Hz • Performance – 100 kg/h (this is a real value, verified on basic materials). • Dimensions – 5000 × 4000 × 2000 mm • Weight – 1300 kg ----- ❖LRK - 200 The set consists: • 15 kW Grinding Mill – Tornado 500 • Dual dust collector • 1st line belt conveyor • 18,5 kW Grinding Mill – Tornado 500 • 2nd line belt conveyor • Wet Separator Gold River 500/2500 Technical Specification: • Complete Set Power – 40kW • Supply – 400V ; 50Hz • Performance – 200 kg/h (this is a real value, checked on basic materials). • Dimensions – 5000 × 4000 × 2000 mm • Weight – 1300 kg ✔Spare parts included. Recyclable resources: ✔ Any kind of Aluminium cables ✔ Automotive cables with adhesive tape ✔ Cords and network cables Ppodpfxehix Daj Ahzol ✔ Coax cables, Christmas lights ✔ Copper cables lined with gel or silicone ✔ Winding coil of a thickness 15 microns, contaminated with adhesive paper or plastic Contact us for more information!

Condition: new, Year of construction: 2024, ZŁOMIARZE Recycling Technology MCW 52/76 Shredder The MCW series quad shaft shredder is based on many years of experience in the plastics and scrap industry. MCW Shredder is a highly reliable, universal pre-shredder for shredding a wide range of materials such as plastics, materials, rubber, wires, electronic scrap, post-production waste as well as slight magnetic materials. Types of MCW Shredders: MCW-52 Technical Specification: • Motor output – 22 kW • Cutting Chamber – 510 × 760 mm • Performance – approx. 400 kg/h (depending of material type) • Weight – approx. 1400 kg MCW-76 Technical Specification: • Motor output – 37 kW • Cutting Chamber – 965 × 780 mm • Performance – approx. 800 kg/h (depending of material type) Additional equipment: • Loading belt conveyor • Dust Extraction • Magnetic Plate with Quick Clean System Pjdpfxehix Hre Ahzspl • Magnetic Separator SM-370 • Unloading Belt Conveyor Contact us for more information!

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Ppedpjv I Skrefx Ahzol Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: new, Year of construction: 2025, Turbo mill MTR-800 Ppedpfx Aov I S Ukshzel The turbo mill is designed for grinding, knocking out, granulating of materials in order to improve the quality of final separation in further recycling processes. Technical date: - Installed power –75kW - Chamber width – approx. 910mm - Chamber diameter – approx. 620mm - Number of abrasive knives – approx. 89 pcs. - Number of abrasive counterknives – 18 pcs. - Structure placed on adjustable vibration isolators - Dimensions – 2200 x 1600 x 1550mm - Chamber opening by means of a manual hydraulic pump - Engine base with a rocker tensioner - Weight – approx. 1950kg- -Discharge ended with an orifice fi-150 -Electrical installation with inverter included in the price.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10011575, Hello, I´m selling filling pellet machine VAI V5/10S Fully automatic, Made in Italy Ppodswxplmspfx Ahzsl Low used, fully function in good condition If you´re interested contact me on mail and we can call you

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Podpfjw Ty Hcjx Ahzjpl Ask for specification!

Condition: used, Year of construction: 2017, Operational condition SPI machine. Ppodpfxsw Ty Rbe Ahzsl Ask for specification!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Ppodpfx Aswhbnlehzsl

Condition: as good as new (ex-display), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 288457-290911, Stroj je nov,nikada nije koristen Ppjdjvp Smvopfx Ahzjl

Condition: used, 7001481, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Ppsdpfst Txayex Ahzsl Model: 7001481 Type: 20 ADVANCED Condition: Used

Condition: used, 619569.0, 35-40 ADVANCED, MS Ultrasonic, ultrasonic generator Model: 619569.0 Type: 35-40 ADVANCED Psdpfx Aot Txbdjhzjpl Condition: Used

Condition: used, 612435.1, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Psdpst Tw Shofx Ahzopl Model: 612435.1 Type: 20 ADVANCED Condition: Used

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Podpfsfwfpbjx Ahzopl Drive: direct current 0.25 kW

Condition: new, Year of construction: 2025, The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in no time at all, thanks to the optional monitoring camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications and in continuous use. Ppsdpfx Ahedgfgcjzjl The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (Pulsed Fiber Laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New, optional: software-controlled, variably adjustable working width (X, axis max. 450mm depending on the structure) included in the scope of delivery!