Used Asahi Okuma for sale (167)

Condition: good (used), Year of construction: 2006, Used OKUMA lathe - Model: LT200-M TwinStar Iijdpfx Asv S Su Sjfijh - Year of manufacture 2006 - Includes bar magazine - Includes chip conveyor

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073   Ijdourfz Iepfx Afieih

Condition: used, Year of construction: 1997, Distance between centers 2070 mm Swing over bed 700 mm Swing over carriage 430 mm Max turning diameter 460 mm diameter (2000 mm) Spindle bore 90 mm Spindle speeds 14-3200 rpm Z-axis movement 2070 mm X-axis movement 330 mm Turret w/12 stations Tailstock taper MT 5 Control: OSP 7000-L Equipped with: Hydraulic steady rest Chip conveyor 10-20 tool holders 10-20 sets of jaws Iijdpfx Aow Rkd Tjfish

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6200 Control Unit Brand Okuma Model OSP P200-L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 2 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 1 Additional Equipment Spindle oil chiller included Side chip conveyor (hinged belt type) Iodpfxjw Rhaxo Afieih Double foot pedal for chuck and tailstock control Includes transformer, manuals, parts list, and schematics General Data Machine weight 6200 Control Unit Brand Okuma Model OSP P200-L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 2 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 1 Additional Equipment Spindle oil chiller included Side chip conveyor (hinged belt type) Double foot pedal for chuck and tailstock control Includes transformer, manuals, parts list, and schematics This 2-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2002, Offered here is a 9-Axis-CNC Turning Center of the manufacturer Okuma. Iijdpfxeq Rf Ube Afieh The machine is in a good condition and can be inspected by prior appointment. Technical Specs:

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher Ijdpfsuhbnnjx Afijih - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year of manufacture 2007 - Includes loading robot and loading carousel - Includes chip conveyor - Coolant tank - Available immediately Ijdpfx Afev S Svvjioih

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1067, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 28 kVA, torque: 80 Nm, controller manufacturer: Okuma, controller model: OSP-U100L, workpiece height (max.): 500 mm, workpiece weight (max.): 700 kg, table width: 560 mm, table length: 1,300 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 15,000 h, coolant supply: 20 bar, spindle nose: BT-40, number of slots in tool magazine: 20, mount diameter: 40 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, 3-axis machining center with internal cooling through the spindle, 15,000 rpm, permanent oil cooling of the spindle. Various tool holders (collets, drill chucks, Weldon holders, and milling head holders). 3 Gressel-Gripos 125 mm vises as new, additionally tool presetting device PWB Toolmaster 250. Iijdpfow S Nc Rjx Afioh

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: P200M, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 64, tool length: 300 mm, tool diameter: 150 mm, Equipment: chip conveyor, Transport, installation, and commissioning – we deliver your machine ready for operation (optional) Machine type: Horizontal Machining Center Manufacturer: Okuma Model: MB-5000H Space Center Year of manufacture: 12.2010 Commissioned: End of 2011 Control system: OSP-P200M Delivery time: by arrangement Iisdpjw S Hcbjfx Afioh 👉Spindle speed 15,000 rpm 👉ConSep coolant filtration system 👉Tool magazine – 64 positions The machining center is in very good overall condition. The machine is suitable for both heavy-duty machining and fine finishing operations. Thanks to its comprehensive basic and additional equipment, including a ConSep coolant filtration system, high-pressure coolant pump up to 70 bar, 64-position tool magazine, dual pallet changer, and spindle speed up to 15,000 rpm, your production becomes significantly more efficient. The machine operates accurately and precisely. Machine features 👉ConSep coolant filtration system with chip conveyor 👉High-pressure coolant pump up to 70 bar 👉Spindle speed 15,000 rpm 👉64-position tool magazine 👉Dual pallet changer Technical data Travel X-axis (column right-left): 760 mm Z-axis (table front-back): 760 mm Y-axis (spindle up-down): 760 mm Rapid traverse X/Y/Z axes: 60 m/min Distance pallet to spindle center: 50–810 mm Distance pallet center to spindle nose: 135–895 mm Palette Pallet size: 500×500 mm B-axis indexing: 1° Max. load capacity: 500 kg Pallet changer: dual Spindle Spindle speed: 15,000 rpm Spindle power: 26 kW Max. torque: 199 Nm Tool holder: BT40 Tool magazine: 64 positions Max. tool diameter (adjacent tools fitted): 70 mm Max. tool diameter (no adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Options 👉Transport organization and execution 👉Machine rigging and installation 👉Machine commissioning and production-ready handover

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand Okuma Model OSP-P200L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 3 Iedpjw Rhaljfx Afisih Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 2 Additional Equipment Renishaw tool probe USB, PCMCIA, and RS232 ports Chip conveyor (hinged belt type) Tool load monitoring and effort control Dual pedal for chuck and tailstock operation Fully equipped with static and live toolholders This 3-axis Okuma LU 300 MY was manufactured in 2006. It features a robust 22 kW spindle motor, dual turrets with live tooling, and a bar capacity of 75 mm. The machine offers a maximum turning diameter of 380 mm and a length of 1050 mm. It includes a programmable hydraulic tailstock, C-axis, Y-axis, and an OSP P200-L control for enhanced precision. If you are looking to get high-quality turning capabilities, consider the Okuma LU 300 MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2001, functionality: fully functional, OKUMA CNC lathe TL10-M in working condition ATTENTION, WITHOUT THE MIST DUST COLLECTOR! Specifications: - Year of manufacture: 2001 - Control: Okuma OSP-U100L - Chip conveyor - Including several tools Main spindle: - Bar capacity: 50mm - Spindle bore: 53mm - Max. swing over bed: 400mm - Max. turning diameter: 210mm - Turning length: 130mm - Spindle speed: 6000rpm Sub spindle: - Bar capacity: 50mm - Spindle speed: 6000rpm Turrets: - Number of turrets: 2 - Number of stations: 12 Iijdpfx Aow Swp Esfieh - Number of powered stations: 12 - X-stroke: 195mm - Z-stroke: 700mm Accessories: - Mist dust collector not included!!! - CTS (coolant through spindle) in both turrets - Live tooling in both turrets - Chip conveyor - 2 x chuck 200mm - Several tool holders: 11 x single tool holder 20x20 2 x double tool holder 20x20 2 x top tool holder 20x20 2 x round tool holder 16 16 x round tool holder 25 4 x live tool holder radial 4 x live tool holder axial - Coolant installation - Machine manuals

Condition: used, Technical details: turning diameter over bed: 460 mm Iodjwa Nwfopfx Afieih turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: OKUMA, controller model: OSP-E100M, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, spindle nose: BT-40, number of slots in tool magazine: 100, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, Horizontal machining center with 6 multipallets OKUMA model MA-400HA with 100 tools, chip conveyor, spindle through coolant system Iedpjw Slbijfx Afieih

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Iiedjwmdv Nopfx Afioh

Condition: used, Year of construction: 1989, x-travel 650 mm y-travel 410 mm z-travel 450 mm Iiedpfxjucgupo Afijh travel x vor 1000 mm control mc4va

Condition: used, Year of construction: 2017, operating hours: 33,500 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have a CNC lathe for sale, brand Okuma-Genos, which is ready for operation. The machine is fully functional and has been regularly maintained and serviced. - Y-axis - Main and sub spindle - Tool probe - Parts catcher Spindle speed: 3800 rpm Spindle operating hours: 20,503 h A detailed description of the machine is included in the attachment. Technical condition: Good. The machine has been in our facility since new, purchased in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. Viewing and functional inspection possible under power in our workshop. Reason for sale: ongoing changes in our projects. Optionally, an LNS bar feeder may be purchased for €7,000 and an oil mist separator for €1,500 (both visible in the pictures). Ijdpfew Np Uhjx Afisih

Condition: used, Horizontal machining center, 6 pallets Iisdpfx Aot Ek Slofijh Priced to sell - dismantled and loaded into truck OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600*710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. 200 TOOLHOLDERS ARE AVAILABLE X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy) X: 560 pallet: 6 Pallet size: 400*400

Condition: ready for operation (used), Year of construction: 2004, Control Unit Iiedsw Aikwjpfx Afijh Brand OKUMA Model OSP-E100L Main Drive Number of axis 3 This 3-axis Okuma VTurn LVT300-M was manufactured in 2004. It features a vertical turning machine design, complete with a load and unload table. Ideal for those looking to get high-quality turning capabilities, consider the Okuma VTurn LVT300-M machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2008, Control system OKUMA OSP-P200M. Cooling threw spindle. otating axe A Tsudakoma 250. Accessories: chip conveyor, probe RENISHAW OMP40 and tool probe. Table 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Iedpswrnapefx Afijih Spindle 50 - 8000 rpm DIN 40 Number of tools in tool changer 48 Machine dimensions 2805 x 2160 x 2746 mm Weight 7100 kg

Year of construction: 1988, condition: ready for operation (used), Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible. Iisdpfxewz N Tce Afieh

Condition: used, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. weight of the machine ca. 8 t Iijdpeh D Anajfx Afijh

Condition: used, Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have an Okuma Genos CNC lathe for sale, fully operational and immediately ready for work. The machine is in excellent working order, regularly maintained and serviced. - Main spindle and sub-spindle Iodow Np S Hspfx Afisih - Tool probe - Parts catcher Spindle speed: 3,800 rpm Technical condition: Good. The machine was purchased new for our facility in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. It is possible to inspect and test the machine under working conditions at our site. The decision to sell is due to changes in our projects. Optionally, an LNS bar feeder is available for €10,000 and an oil mist separator for €1,500 (both visible in the photos).

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, controller model: P200M, Machine type: Horizontal Machining Center Manufacturer: OKUMA Model: MA-400HA Year of manufacture: 2008 Control: OSP – P200M Country of origin: Japan Delivery: short-term by arrangement 4-axis machining center! High productivity! Iijdpfx Afsw Hzxzeieh Includes various accessories! Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software features - Touch setter with length measurement and breakage detection - Work area shower Short description: This machining center is in good overall condition. Its comprehensive base and additional equipment make this used machine highly versatile and characterized by high productivity. 4-axis machining enables efficient and flexible processing of workpieces. The integrated ConSep system with high-pressure pump ensures coolant filtration is directly integrated into the production process. The touch setter not only measures tool length but also monitors for breakage. Additional accessories such as a work area shower and software packages further enhance the production capabilities. This CNC machining center allows for cost-effective and efficient manufacturing. Technical specifications: - Axis travel: X-axis (column left-right): 560 mm Z-axis (table front-back): 625 mm Y-axis (spindle up-down): 610 mm - Number of pallets: 2 (2-pallet changer) - Pallet size: 400 x 400 mm - Max. pallet load: 400 kg - Max. workpiece dimensions on pallet: Ø500/600 x 710 mm - Spindle speed: 15,000 rpm - Main spindle (10min/cont.): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions - Machine dimensions without accessories (LxW): approx. 4450 x 2410 mm - Total machine length (machine with ConSep unit): approx. 6600 mm - Machine height: approx. 2950 mm - Weight: approx. 11,500 kg Optional: - Transport arrangement and execution - Machine installation and setup - Machine commissioning

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,082 h, functionality: fully functional, machine/vehicle number: 114599, turning length: 541 mm, turning diameter: 210 mm, travel distance X-axis: 192 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, TECHNICAL DETAILS Machining specifications Turning length: 541 mm Turning diameter: 210 mm Axes and travels X-axis travel: 192 mm Y-axis travel: 50 mm Z-axis travel: 700 mm Spindle Spindle speed: 6,000 rpm Spindle motor power: 11 kW Feed X-axis feed rate: 30 m/min Z-axis feed rate: 40 m/min MACHINE DETAILS Electrical data Supply voltage: 400 V Phases: 3 P Iijdpfx Afew Ekrusieh Frequency: 50 Hz Operating hours On time: 92,265 h Spindle hours: 23,082 h Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The machine will remain powered until the end of the auction, after which it will be dismantled.

Year of construction: 2005, condition: ready for operation (used), A CNC 4-axis lathe Okuma including a conventional external cylindrical grinding machine TOS BUAJ 28 is available. 1) Lathe, year of manufacture: 2005, turret: 2-disc turret, tool positions: 12/8, tool holder: VDI40, speed: 3800rpm, turning diameter: 370mm/530mm, turning length: 600mm, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2200mm, weight: approx. 6800kg, control: Okuma OST E100L. Includes clamping device design, part catcher, part conveyor, and chip conveyor. Without tailstock, bar loader, spindle reduction, and VDI holders. 2) TOS, year of manufacture: 1988, max. grinding diameter: 280mm, center height: 140mm, distance between centers: 630mm, max. workpiece weight: 120kg, headstock: MT4, workpiece spindle swivel range: +/-90°, grinding head swivel range: +/-45°, grinding wheel dimensions X/Y/Z: 400mm/40mm/127mm, speed: 2560rpm, feed rate: 7m/min. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/1500mm, weight: approx. 2000kg. Includes accessories and grinding wheels. Documentation available. An on-site inspection is possible. Ijdpsw Rqwyefx Afieih