Used Annealing for sale (110)

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. Kwodswf Rgrspfx Ad Nst In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23 Kwedpfjwf Rg Eex Ad Nst

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg Kedpfx Aowf Rgxed Nowt dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The innovative flash butt welding machine for bandsaw and bimetal blades is developed entirely by our engineering department. It guarantees perfect welds and precise repeatability of the process. User friendly touch screen display from Schneider Electric that allows you to operate the machine effortlessly. The welding process is fully automatic, with the capability to adjust the electric current in 6 stages. The machine also allows for stepless regulation of electric current during annealing and pyrometric control throughout the welding process. The FBM10 is extremely easy to set up and cost-effective to maintain. Power supply voltage 400V Rated transformer capacity at 50% duty cycle 5kVA Frequency of electrical current 50HZ Clamping of the band saw blade Manual or Hydraulic clamping /Optional FBM 10.02/ Annealing Manual or Automatic, with pyrometric control /Optional/ Menu language Bg / En / Ksdexhf Dzopfx Ad Njwt Possibility for welding: - band saw blades for wood mm 6÷60 - Bi-metal band saw blades mm 6÷54 - stainless steel band saw blades mm 6÷40 - band saw blades without teeth mm 6÷50 Weight: 197kg Dimensions: (length х width х height) mm 910 х 640 х 530

Condition: new, Year of construction: 2025, Technical Specifications Model: KMF10 Operated: Spring pressure Power: 10KVA (%50 DC) Welding Capacity: Up to 60mm mild steel strip Input Voltage: 220V (50Hz) Protection Fuse: 220V / 40A Kedpfx Adsvmyalo Newt Welding Power Level: 5 Annealing Power Level: 5 Power Input Cable: 2,3m Protection Class: IP21 Dimensions (W/L/H): 160cm x 180cm x 79cm Weight: 294Kg

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Blade changes in seconds Self-locking Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: Kwodew Rhkqspfx Ad Njt With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...

Condition: used, Tool steel, round material, shaft cut Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Used in toolmaking for cutting, punching, and embossing tools. Rollers and profile rolls, measuring tools, guide rails, paper cutting knives. Condition on delivery: annealed to max. 229 HB Tensile strength as delivered: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Kedpfxegmi U Sj Ad Nowt Working hardness: 58-62 HRC Soft annealing: 680-720 °C - Medium alloyed cold work tool steel - Oil-hardening 4 pieces available, price per piece.

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing Kjdpfx Adjguvtds Newt - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces Ksdpjguvtaofx Ad Nswt rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: good (used), FOBA DP 15 Marking Laser Kwsdpfx Aew U T Ebjd Not The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the "all-round laser" to permanently and sharply mark materials such as metals and plastics. The 1064 nm wavelength is well absorbed by many materials, making it suitable for annealing, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible, and precise marking. How it works: The laser beam creates a focused spot of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A color change of the material through heating. Color change: Creating a color contrast on the material. Material ablation: Removing material to create a depression. Details: Device: FOBA DP 15 Laser Marking System Laser Type: Fiber Laser Wavelength: 1064 nm Focus Length (f): 254 mm (equivalent to 10 inches) Find more items - new and used - in our shop! International shipping costs upon request!

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Kodpfx Adsuhmace Newt Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: excellent (used), Year of construction: 2002, Technical Data of existing galvanizing plant for STEEL wires: Kedpfxswwhizs Ad Nowt Plant for: n. 24 wires Diameters of wires to be galvanized: from 1.50 mm. to 4.00 mm. Continuous operation: 24h x 7 days Suitable for the production of both baked and raw galvanized (not using the annealing oven) Production about: 20-24 tons per day Methane gas consumption about: 20-30 m3/h Electricity consumption about 25 kwh Year of construction of the complete line: 2002 (with various updates made over time)

Condition: good (used), Year of construction: 1979, Complete production line for Technical and Commercial Chain Manufacturer - WAFIOS / VITARI / DANIELI / IPSEN Year - 1979/1989 Factory Consists : - Welding machines 14 pieces - Bending machines 10 pieces Kwodpfx Aoqy E I Ued Njt - Bending + welding machines - 2 pieces ( Wafios KEH3 +KER3 ; Wafios KEH5 + KER5 ) - Wire drawing line 7 blocks - Danieli with spooler - Cementation furnace - Annealing furnace Lots of sapare parts

Year of construction: 2017, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, For sale: 1 gas-fired chamber oven with air circulation and bogie hearth Manufacturer: Nolzen Industrieofenbau GmbH & Co. KG Type: KLWg 220/180/650 YEAR OF MANUFACTURE: 2017 for unsupervised operation for three-phase 400Volt three-phase current for temperatures up to max. 700 degrees C. for natural gas "H", liquid gas Number of burners: 8 Total burner output: 720kW For further technical data see attached PDF. Kodpfor Hmg Rsx Ad Nswt The stove itself was only in operation for 4 years and has made approx. 100 anneals of 23 hours each during this time.

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Kwedpjdzzyfsfx Ad Not

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, temperature: 630 °C, power: 450 kW (611.83 HP), plate length: 1,400 mm, plate width: 1,100 mm, TECHNICAL DETAILS Device type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: clear float glass Maximum glass size: 1,400 × 1,100 mm Furnace Furnace width: 1,600 mm Opening/closing height: 500 mm Opening mechanism: electric Motor power for opening/closing: 1.5 kW Temperature: 630 °C Rollers Roller type: quartz rollers Roller diameter: 60 mm Number of quartz rollers: 46 Number of rollers in the cooling section: 22 Roller spacing: 100 mm Heating Heating system: electric with forced convection Heating power: 450 kW Control: PLC control with zone-dependent temperature regulation Speed Speed range: 1 – 10 m/min MACHINE DETAILS Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total weight: 10 t System configuration Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process sequence 1. Glass loading: The flat glass is placed on the loading table and transported into the heating section. 2. Heating: In the heating section, the glass is uniformly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Cooling (Annealing): In the cooling section, the glass is uniformly and slowly cooled to reduce stress. 5. Glass unloading: The processed glass is conveyed to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section Kwedewtfiqopfx Ad Njt - Unloading table - Zone-wise controllable heating system via PLC control - Forced convection system for uniform heat distribution - Quartz rollers with close spacing for precise glass guidance - Integrated cooling section with 22 rollers for controlled glass cooling The furnace has been dismantled into components of approximately two meters in length. This allows transport with standard trucks.

Condition: new, ELMAG drill grinder DBG 832 W 8 - 32mm DBG - 3 in 1 The DBG series drill grinder is used for grinding twist drills made of HSS and carbide twist drills. The machine has integrated grinding stations for grinding the point angle, the clearance angle and for cross grinding. Special CBN or SDC diamond grinding wheels are used, which are to be used depending on the drill material. material. SDC coated grinding wheels Metal-coated synthetic diamond for sharpening carbide drills. CBN coated grinding wheels Deliver sensational sharpening results at very high speed and without annealing. The special thermal conductivity of CBN (boronite crystals) dissipates the resulting frictional heat into the wheel, preventing hardening of the cutting edge and virtually eliminating sparking. CBN has a higher thermal stability than diamond and is ideal for sharpening HSS tools due to lower wear. Kodpfjt Hhg Nox Ad Nowt Optionally available: Grinding wheel SDC for DBG 832 W Order no. No. 61016 Collet chuck holder for Ø 31-32 mm for DBG 832 W Collet set (ER40) 2-piece, Ø 31-32 mm for DBG 832 W Now free of charge with both models Collet holder and collet set ER 20 or ER 40 ADVANTAGES CBN grinding wheel for HSS Adjustment device for center angle 95°-135 Clearance angle grinding function Cross grinding function For drill bits 8-32 mm 23 collets 8-30 mm TECHNICAL DATA Grinding range drill bit Ø 8 - 32 mm Grinding range point angle 95 - 135 ° Speed 4400 rpm Motor power 0.25 kW Mains connection 230/50 V/Hz Length 490 mm Width 250 mm Height 260 mm Weight 27 kg

Condition: new, Holzkraft minimax fs 41e TERSA jointer thickness planer 5503451. Planer-thicknesser in professional design. - TERSA planer blade system enables particularly quiet running. - Diagonally toothed steel feed roller for constant and even material feed. - Material feed with two speeds - Numerical display for thicknessing table height - The 2,000 mm long dressing tables allow easy dressing of large workpieces. - Working tables are made of cast iron, annealed and stress relieved, thus insensitive and durably flat - Stable large aluminum dressing fence with round rod guide (1200 x 160 mm) - Thicknessing table adjustment by handwheel with numerical display for planing height - The high machine weight ensures highest precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction - Made in Italy TECHNICAL DATA Dimensions and weights Length (product): ca.2000mm Width/Depth (product): ca.1110mm Weight (net): ca.430kg Dresser Total length of the tables: 2000mm feeding table length: 1034mm working height: 900mm chip removal max. dressing: 5mm dressing fence length: 1200mm dressing fence height: 160mm Suction connection Suction port diameter thickness: 2 x 120mm Installation information Required space length: 2000mm Space requirement width/depth: 1670mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 925mm Kwjdpfekyt Iqjx Ad Not Machine body width/depth: 645mm Working area length: 1000mm Working range width/depth: 3500mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length: 775mm Thickness table width: 423mm Working height thickness min.: 3mm working height thickness max: 230mm Chip removal max. thickness: 5mm Electrical data Power drive motor: 5kW supply voltage: 400V Mains frequency: 50Hz Planing cutterhead Type of cutterblock: TERSA planing shaft diameter: 87mm Number of planing knives: 4pcs Planing shaft speed: 5200min¯¹ Max. planing width: 410mm Feed rate feed speed: 6 / 12m/min SCOPE OF DELIVERY - Dressing join fence with round bar guide - Num. Display thicknessing table positioning - 2 feed speeds in wood infeed - Tersa planer shaft Holzkraft dealer - accessories available on request!

Condition: new, Holzkraft minimax fs 30c TERSA jointer thickness planer 5503031 With TERSA planer blade quick change system With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Diagonally toothed steel infeed roller for constant and even wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when the dressing tables are opened Dressing tables opening to the rear The high machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Cast iron work tables, re-annealed and stress relieved, thus insensitive and permanently flat Table lips for quiet running TECHNICAL DATA: Dimensions and weights length (product) approx. 1725mm width/depth (product) approx. 880mm Weight (net) approx. 270kg Dresser Kodpfx Aokknb Hod Nswt Total length of the tables 1500mm working height 900mm chip removal max. dressing 4mm Connection suction suction port diameter thickness 2 x 120mm Installation information Required space length 1725mm Space requirement width/depth 1350mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Machine body length 659mm Machine body width/depth 488mm Working area length 1000mm Working area width/depth 3500mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 565mm Thickness table width 300mm Working height thickness min. 3mm Working height thickness max. 230mm Chip removal max. thickness 4mm Electrical data Power drive motor 4kW Supply voltage 400V Mains frequency 50Hz Planing cutterhead Type of cutterblock TERSA Planing shaft diameter 72mm Number of planing knives 3pcs Planing shaft speed 5200min¯¹ planing width max. 300mm Feed rate feed speed 7m/min SCOPE OF DELIVERY: TERSA planer cutterhead anodized aluminum jointer fence Holkraft dealer - accessories available on request!

Condition: used, Complete Heat Treatmet House for Sale Kwedpow Dhuqjfx Ad Njt The Line includes ; (All modernised at 2023) 1. 1 ea AKF1 IPSEN TQF 4 EM 1977 Athmosphere Controlled Furnace 2. 1 ea AKF2 IPSEN TQFRA 5 EM 1991 Athmosphere Controlled Furnace 3. 1 ea AKF3 IPSEN T4 EM 1972 Athmosphere Controlled Furnace 4. 1 ea AKF4 IPSEN TU-5 EM 1970 Athmosphere Controlled Furnace 5. 1 ea HSH 2011 Stress Releiving, Bright Annealing 6. 1 ea Ipsen Dac 5 ER 2011 Nitration, stress releiving 7. 1 ea Ipsen DAC 4 1980 Stress Releiving, Bright Annealing 8. 1 ea HSH 2007 Stress Releiving, Bright Annealing 9. 1 ea BOREL 1987 Pit Type Stress Releiving 10. 2 ea Ipsen 1972 model Stress Releiving 11. 1 ea Loading Car 12. 1 ea Unloading Car All furnaces has already beed dismantled and ready for shiping.

Condition: ready for operation (used), functionality: fully functional, HEAT TREATMENT FACILITY WITH SCADA CONTROL SYSTEM Kwjdpfowgmp Sjx Ad Nst AKF1 İPSEN TQF 4 EM 1977 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF2 İPSEN TQFRA 5 EM 1991 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF3 İPSEN T4 EM 1972 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF4 İPSEN TU-5 EM 1970 model Atmosphere controlled Chamber type furnace (1 Piece) • HSH 2011 model high temperature stress relief, bright annealing (1 Piece) • İpsen Dac 5 ER 2011 model nitriding, high temperature stress relief (1 Piece) • İpsen DAC 4 1980 model high temperature stress relief, bright annealing (1 Piece) • HSH 2007 model high temperature stress relief, bright annealing (1 Piece) • BOREL 1987 model well stress relieving furnace (1 Piece) • 1972 model Ipsen stress relieving furnace (2 Pieces) • Loading car (1 Piece) • Unloading car (1 Piece)

Condition: new, functionality: fully functional, total height: 2,300 mm, overall weight: 145 kg, tank capacity: 1,789 l, inner diameter: 1,200 mm, TECHNICAL SPECIFICATIONS - Brand: ARSILAC - Model: STOBP1700 - Material: 316L stainless steel - Total capacity: 1789 litres - Base: curved on legs - Roof: centred conical - Interior finish: bright annealed - Exterior finish: brushed ROOF - Off-centre upper hatch with lever, diameter 200 mm - 1 DN40 MÂCON connection on hatch chimney with cap - Empty lifting rings RING - 1 ladder support - 1 round door, diameter 400 mm, at the bottom of the ring, opening outwards - 1 partial drain with square flange 100x100, stainless steel ball valve 40 MÂCON and stainless steel plug and decanter elbow - 1 tasting tap on DIN 15 connection - 1 needle thermometer - 1 complete stainless steel level gauge with tap and stainless steel ruler (polycarbonate tube) Kodpfxew Tly Ue Ad Newt - 1 honeycomb belt with 1.8 m² exchange surface - Circuit operating pressure 3 bar, test pressure 10 bar - 1 inlet and 1 outlet on the honeycomb circuit, 3/4" male GAS connection - 1 connection with protective sleeve for control probe - 1 identification plate BOTTOM - 1 total drain with 100x100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 3 stainless steel feet, height 400 mm, adjustment screws and base plate DIMENSIONS - Diameter: 1200 mm - Ferrule height: 1500 mm - Total height: 2300 mm - Weight: 145 kg - Roof thickness: 12/10 mm - Ferrule thickness: 15/10 mm - Curved base thickness: 15/10 mm

Condition: new, functionality: fully functional, total height: 3,050 mm, overall weight: 168 kg, tank capacity: 2,623 l, inner diameter: 1,200 mm, TECHNICAL SPECIFICATIONS - Brand: ARSILAC - Model: STOBP2500 - Material: 316L stainless steel - Total capacity: 2623 litres - Base: curved on legs - Roof: centred conical - Interior finish: bright annealed - Exterior finish: brushed Kedpfxjw Tlw Ts Ad Nswt ROOF - Off-centre upper hatch with lever, diameter 200 mm - 1 DN40 MÂCON connection on hatch chimney with cap - Vacuum lifting rings RING - 1 ladder support - 1 round door, diameter 400 mm, at the bottom of the ring, opening outwards - 1 partial drain with square flange 100x100, stainless steel ball valve 40 MÂCON and stainless steel plug and decanter elbow - 1 tasting tap on DIN 15 connection - 1 needle thermometer - 1 complete stainless steel level gauge with tap and stainless steel ruler (polycarbonate tube) - 1 honeycomb belt with 1.8 m² exchange surface on top of the ring - 1 honeycomb belt with 1.2 m² exchange surface around the door - circuit operating pressure 3 bar, test pressure 10 bar - 1 inlet and 1 outlet on the honeycomb circuit, 3/4" male GAS connection - 1 connection with thermowell for control probe - 1 identification plate BOTTOM - 1 total drain with 100x100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 3 stainless steel feet, height 400 mm, adjustment screws and plate DIMENSIONS - Diameter: 1200 mm - Shell height: 2250 mm - Total height: 3050 mm - Weight: 168 kg - Roof thickness: 12/10 mm - Collar thickness: 15/10 mm - Curved base thickness: 15/10 mm

Condition: new, functionality: fully functional, total height: 3,500 mm, overall weight: 400 kg, tank capacity: 5,205 l, inner diameter: 1,600 mm, TECHNICAL SPECIFICATIONS - Brand: ARSILAC - Model: STOIPSER5300 - Material: 304 stainless steel - Total capacity: 5,205 litres - Base: flat sloped, 4% slope - Roof: centred conical - Interior finish: bright annealed - Exterior finish: brushed ROOF - 1 hatch, diameter 400 mm, with lever - 1 connection with PVC ball vent RING - Lifting rings - 1 ladder support - 1 rectangular door, 420×530 mm, at the bottom of the ring, opening outwards - 1 partial drain with 100×100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 1 tasting tap on DIN 15 connection - 1 needle thermometer - 1 complete stainless steel level gauge with tap and stainless steel ruler (polycarbonate tube) - 4 coil turns with 2.15 m² exchange surface on the shell - 2 coil turns with 0.75 m² exchange surface around the door - Maximum pressure on coil circuit: 1.5 bar - 1 inlet and 1 outlet on the coil circuit, 1‘ 1/4’ male GAS connection - 1 connection with thermowell for control probe - 1 identification plate BOTTOM - 1 total drain with 100×100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 3 stainless steel feet, height 500 mm, adjustment screws and base plate DIMENSIONS - Diameter: 1600 mm Kwedsw Tlu Espfx Ad Net - Shell height: 2500 mm - Total height: 3500 mm - Weight: 400 kg - Roof thickness: 15/10ᵉ mm - Shell thickness: 15/10ᵉ mm - Bottom thickness: 20/10ᵉ mm

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS - Brand: ARSILAC - Model: STAIPSER5200 - Material: 316L stainless steel - Total capacity: 4,893 litres - Bottom: flat sloped, 4% slope - Roof: floating cap - Interior finish: bright annealed - Exterior finish: brushed ROOF - 1 316L stainless steel floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) RING - Lifting rings - 1 ladder support Kwsdpfx Aow Tlrded Njt - 1 rectangular door 420×530 mm positioned 300 mm from the bottom of the ring and opening outwards - 1 partial drain with 100×100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 1 tasting tap on DIN15 connection - 1 needle thermometer - 1 complete stainless steel level gauge with tap and stainless steel ruler (polycarbonate tube) - 2 coil turns at the top of the shell - 3 coil turns on the shell above the door - 2 coil turns around the door - Total exchange surface area 4.76 m² - Maximum pressure on coil circuit: 1.5 bar - 1 inlet and 1 outlet on each coil circuit, 1‘ 1/4’ male GAS connection - 1 connection with thermowell for control probe - 1 lifting winch - 1 identification plate BOTTOM - 1 total drain with 100 × 100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 1 450 × 100 × 200 mm drain pipe - 1 50 MÂCON connector with plug on drain pipe - 4 stainless steel feet, height 500 mm, adjustment screws and base plate DIMENSIONS - Diameter: 1800 mm - Height of ring: 2000 mm - Total height: 3220 mm - Weight: 425 kg - Ring thickness: 15/10ᵉ mm - Base thickness: 20/10ᵉ mm