Used Angle Table for sale (21,952)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Gksdpsz Akftsfx Ak Uob Router motor power: 1.1 kW Voltage: 380 V

Condition: used, Altendorf C45 Panel Saw with Sliding Table Scoring unit 0.75 kW, electrically adjustable up/down Sliding table 320 cm Gkjdpsyt Ibbsfx Ak Usb Max cutting width at rip fence on the right side: 130 cm Tilting 0-45°, manually adjustable Saw blade height adjustable manually Motor power 4 kW Max saw blade diameter 315 mm Duplex angle fence included The machine has been inspected, still holds accuracy and angles, and is fully functional

Condition: like new (used), Altendorf F45 panel saw, new 320cm carriage, blade tilt and up-down adjustment with electric motor, right-hand rip fence with electric motor adjustment up to 1340mm, 2-axis scoring saw with electric adjustment 5.5kW main motor; 3 cutting speeds max. blade diameter 450mm, switches in the sliding table Left-hand rip fence on the carriage, adjustable to an angle Year of manufacture: 2025 Machine available from stock. Godpfx Akjzmwale Uokb

Condition: used, Year of construction: 2026, total height: 600 mm, total length: 2,400 mm, total width: 1,200 mm, Colour: Grey Welding table / Clamping table * Drilled holes! * Diagonal grid! Dimensions: 3000x1500mm Table-thickness: 15mm Hole-diameter: 28mm Extras at extra cost - 4x 3D Angle 300mm - 6x Stop 150mm - 6x Stop 225mm - 1x Protractor  - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 2400 Gkjdpfx Akezry Rqs Usb - Table width [mm]: 1200 - Table top thickness [mm]: 15 - Transport dimensions: 2400mm x 1200mm x 600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components Godpfsw U U R Esx Ak Uekb - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Gjdpfozx Anxsx Ak Uekb Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 Gjdpfxsxpudte Ak Uekb - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility System 28 Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm Gsdjvlgzajpfx Ak Uskb D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Gedoxghtvspfx Ak Uskb Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: excellent (used), Year of construction: 2021, For sale is a high-quality Format4 Profil 45 M from Felder. This machine was manufactured in 2021 and is in excellent condition. The Profil 45 M is a heavy-duty, precision swivel spindle table saw designed for professional use. The electric adjustment of the milling spindle and the fence allows for comfortable, quick, and very precise operation. Features and technical data: +Manufacturer: Format4 / Felder +Type: Profil 45 M +Year of manufacture: 2021 +Condition: very good +Robust and low-vibration industrial design +Stable cast iron milling table +Electric height adjustment of the milling spindle +Electric milling spindle swivel from -5° to 45° +Digital display for spindle height and swivel angle +Milling spindle quick-change system +Milling spindle diameter: 30 mm +Usable spindle height above the table: 140 mm +Milling spindle lock from the outside +Five speeds: 3,500 / 4,500 / 6,000 / 8,000 / 10,000 rpm +Right and left rotation +Large milling table opening: 320 mm +Milling fence for tools up to a maximum diameter of 250 mm +Electromotive MULTI adjustment system for the milling fence +Digital display of the fence position +Anodized aluminum fence scales +Working height: approx. 890 mm Godpfxszz Nm Te Ak Uekb +Dust extraction connections on the milling fence and under the table +Weight depending on equipment: approx. 730 kg +Operating voltage: 400 V Comfortable and precise operation: The height and angle of the milling spindle are conveniently adjusted electrically and read off precisely via digital displays. The milling fence can also be adjusted electromotively. This allows for quick, precise, and reproducible adjustments. The milling spindle quick-change system enables rapid tool or spindle changes and significantly reduces setup times. The milling fence can be conveniently folded away for tool changes. Thanks to the large table opening, even larger milling tools can be safely used below the table. The rear-swiveling milling spindle ensures comfortable workpiece guidance, good chip removal, and allows for the trouble-free use of a feed device even when swivel milling. An extremely stable and user-friendly table saw for demanding milling operations, individual pieces, and professional series production. -Inspection and a test run are possible after prior arrangement. -Loading on-site is no problem. -You will receive an invoice with VAT shown. -Price: €10,500 net

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Gkedpfxeq A Icqo Ak Usb

Condition: used, Year of construction: 1983, functionality: unexamined, input voltage: 220 V, total length: 4,000 mm, total height: 1,600 mm, table height: 900 mm, For sale is a BOTTENE oscillating/miter saw with a large roller table and material support. Technical data: Manufacturer: BOTTENE Model: A Year of manufacture: 1983 Machine no.: 95 Connection: 220 V Angle adjustment up to approx. 45° Large roller table Material stops Dust extraction connection Main switch Emergency stop Mobile Saw blade mounted Dimensions approx.: Overall length: 4.0 m Height: 1.60 m Table height: approx. 80–90 cm Gksdpfxjzzcfis Ak Ueb Table width: approx. 70–100 cm Used, condition appropriate for its age. Signs of wear and paint damage are present. Condition, see images. Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Gsdezwp Uiepfx Ak Ujkb Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD latest software 7/26 TwinFlex edition with 12" touchscreen, double sliding table, adjustable on both sides, manual parallel fence adjustment, parallel fence with fine adjustment, control panel at eye level, adjustable, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, Gedozgwl Ijpfx Ak Uokb electric tilt adjustment, AKE tool clamping system, automatic correction of cutting height, when the saw unit is tilted, easy axis calibration, machine diagnostics, operating hour counter, USB interface, dust-proof ----- Technical data ----- Swivel range: 0 - 46 °, Cutting length: 3,000 mm, Cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12 ", machine height: 91 cm Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. As soon as hands are detected in that area, the saw unit is quickly lowered and quickly stopped within a quarter of a second. EDITION TWINFLEX - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Adjustable on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for adjustment on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Quick lowering and quick lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm. - Scoring system RAPIDO 180 mm ALTENDORF for adjustment on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, can be swivelled out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion - HandGuard 2025 new version The machine is sold with a new warranty of 1 year. The machine can be purchased at an absolute special price. We would be happy to make you an offer.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, 4-5 axis CNC Still in operation Good maintained condition Numerically controlled cutting, drilling, and milling CNC machining center Comes with a 12-position tool magazine enabling various machining processes HSK 63 F tool holders and additional accessories as shown in the photos are included in the machine price Working axis dimensions: X 3400 x Y 1720 x Z approx. 400 mm Vacuum table dimensions: 3120 x 1200 mm Axes: X, Y, Z + rotation + option to purchase angled heads or additional tools Main motor power: 7.5 kW Working speed: 900 – 18,000 rpm Max tool diameter: 140 mm 2 x PC with Windows XP and ROUTOLINK software (second PC is a backup) 2 vacuum pumps Warranty and post-warranty service provided Price includes machine demonstration and operator training Original documentation CE safety standard Year of manufacture: 2001 Overall dimensions: 6865 x 3800 x 2350 mm Gkodpfx Aksvva T Do Ujb Weight approx. 6000 kg

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Motor power 50Hz 3~ 400V 5.5kW Sliding table 2800 mm without scoring saw Digital angle adjustment display Digital speed display Hydraulic lifting / lowering / tilting Cutting width 1005 mm Manual parallel fence LAP laser system Mitre fence (small) Saw blade diameter 250 - 450 mm Gkedpfx Aey Icbgsk Ujb

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Colour: Grey Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 Gkodpfsyf Hhwsx Ak Uob - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, total length: 3,750 mm, total width: 2,250 mm, total height: 1,950 mm, Colour: Cream Weight: 7.600 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 6081991152 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 22.0 - Max. sheet thickness [mm]: 10 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 13 - Backgauge type: Electric - Backgauge depth [mm]: 800 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized Gkedpfx Aozz Rb Sek Ueb - Blade gap adjustment: Manual - Table type: Fixed table - Transport dimensions: 3750mm x 2250mm x 1950mm (l x w x h) - Transport weight [kg]: 7600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, functionality: fully functional, feed length X-axis: 160 mm, feed length Z-axis: 650 mm, PALMARY GU32X60 NC cylindrical grinding machine, year 2017, designed for external cylindrical grinding operations. The machine is equipped with, among other things, a 40 l/min paper filter, a CM5 collet chuck, and scales on the X and Z axes. TECHNICAL SPECIFICATIONS Capacities Maximum diameter above the table Ø 320 mm Distance between centers 600 mm Maximum external grinding diameter Ø 300 mm Maximum load between centers 150 kg Grinding wheel Grinding wheel dimensions Ø 405 x 50 x Ø 127 mm Linear speed 45 m/s X-axis Manual travel 160 mm Automatic rapid traverse 40 m/min Maximum travel 250 mm Minimum adjustment unit 0.001 mm Gsdpfjzzppnex Ak Ujkb Handwheel rotation 2 mm Graduation 0.005 mm Z-axis Travel speed 1.5 m/min Maximum travel 650 mm Minimum travel in automatic reciprocating motion 8 mm Travel per handwheel rotation 20 mm Pivot angle -2° to +10° Work spindle Pivot angle -30° to +90° Variable speed 10 to 300 rpm Maximum spindle load, including tool holder 35 kg Maximum length 150 mm Tailstock Travel 25 mm Fine adjustment range ± 0.03 mm Motors Grinding wheel spindle 3.7 kW Work spindle – AC servomotor 0.85 kW Hydraulic pump 0.37 kW Grinding wheel spindle lubrication pump 0.18 kW Coolant pump 0.18 kW EQUIPMENT 40 l/min paper filter CM5 collet chuck X-axis scale Z-axis scale

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) Gksdpfeumci Sox Ak Uob For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Gkjdszx Sxgjpfx Ak Ueb Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: new, Catalog number: RE066 TECHNICAL DATA Gkjdpfx Aksztncqe Ujb - Main blade diameter: ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm): ⌀120/20 mm - Main motor power: 4 kW - Scoring motor power: 0.75 kW - Rotational speed: 4000 rpm - Scoring blade rotational speed: 8800 rpm - Blade tilt: 0 – 45° - Max. cutting length: 3200 mm - Moving table stroke: 3400 mm - Cutting width with parallel guide: 1250 mm - Splitting knife: ⌀350 mm - Parallel fence adjustable to angles of 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Upper dust extraction port diameter: ⌀80 mm - Lower dust extraction port diameter: ⌀100 mm - Weight: 650 kg ADVANTAGES – New machine – CE certificate – Warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate. (In case of significant exchange rate fluctuations, the price may change.) Net price: 26000 PLN Net price: 6190 EUR, depending on the exchange rate of 4.20 EUR (Prices may change with higher fluctuations.)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, planing width: 510 mm, number of blades: 4, overall weight: 715 kg, total length: 2,725 mm, blade shaft diameter: 120 mm, height adjustment type: mechanical, roll width: 120 mm, table length: 2,725 mm, Equipment: motor brake, SCM F2 F520 Planer Jointer Surfacer – LIKE NEW! Surface planer from renowned brand SCM. The machine is in excellent technical condition. Fully serviced. Italian manufacturer. TECHNICAL SPECIFICATIONS: - Maximum planing width: 510 mm - Cutterblock diameter: 120 mm - Number of knives: 4 TERSA - Motor: 5.5 kW - Infeed table length: 1495 mm - Outfeed table length: 1175 mm - Total table length: 2725 mm - Adjustment of infeed and outfeed table heights - Fence: 190 x 1200 mm - Fence angle adjustment - Safety switch - Power supply: 400 V - Cutterblock silencing Gedpfx Aoxxm Sbek Uokb - Cutterblock guard - Year of manufacture: 2014 - Operating manual (DTR) MACHINE DIMENSIONS: - Length: 2725 mm - Width: 900 mm - Height: 1200 mm - Weight: 715 kg Financing options available: leasing or installments. Simply visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you view our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE Machine transport available across Europe and beyond! Tel: 664 335 465 Tel: 530 632 386

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Godpfxsuuh Sus Ak Uokb Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Height: 25 cm

Condition: excellent (used), SCM SI 400 EP panel saw Sliding table 320 cm, Motorized tilting 0–45 degrees Motorized up/down blade adjustment, Gsdsy Rzphopfx Ak Ujkb Right-side rip fence motorized adjustable up to 1500 mm, Manual scoring unit adjustment, 9 kW motor, 3 blade speeds, Max blade diameter 400 mm, Sliding table fence adjustable for angle Used machine, in very good condition.