Used Air Humidifier for sale (37,079)

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 -Type: M4 -Weight: 0.3 kg Mqnuheyt

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Cr8Mla8Ziq Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: good (used), suitable for nitrogen all stainless steel belt width ± 600 mm Dqx7El nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: used, Rüttler - Jogger VIBRO-AirYear ca. 1992 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nywugh0Yn2 Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: as good as new (ex-display), Year of construction: 2021, Cooling capacity: 26, 164, 230 kW Year of production: 2021 Country: manufactured in Italy Airflow: 5,000/40,000/50,000 m³/h Dimensions: 920 x 1120 x 720 mm/2120 x 2620 x 1920 mm/2270 x 3170 x 2040 mm Condition: very good, new Quantity of product: 4 pcs. Bicunwo8Vxg Working temperatures of the AHU: -40/+70 °C Clivet AQX10, 26 kW (Year of manufacture – 2021), quantity 1 pcs. – 920 x 1120 x 720 mm, Airflow(2.5 m/s) – 5 000 m³/h Clivet AQX25, 164 kW (Year of manufacture – 2021), quantity 1 pcs. – 2120 x 2620 x 1920 mm, Airflow(2.5 m/s) – 40 000 m³/h Clivet AQX27, 230 kW (Year of manufacture – 2021), quantity 1 pcs. – 2270 x 3170 x 2040 mm, Airflow(2.5 m/s) – 50 000 m³/h

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw power: 75 Kw Qqq0L air transport : 12.9 /min :774 m3/h pressure: 8 bars voltage: 400v 50Hz 3 phase Construction of year: 1996 hours:51000h weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2018, Condition: excellent (used), - volume flow: up to 1200 m³/h - elektric: 3-Ph. 400 V - 50/60 Hz - power: 1,5 kW (IE3) - current: 2,3 A - protection class: IP54 - noise: 70 dB Bxrqwmlrd8

Condition: new, Year of construction: 2025, Band width: max. 38 mm W7L0Unbz Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Feed force: 90 N Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Condition: excellent (used), Year of construction: 2019, 1 x screw compressor Almig first air FAS 7 - 10 Year of construction: 2019 with refrigeration dryer first air MKE 100 + Kessl sea Bsbelnoqjsg DR 270 11 Z Nice compact system with few operating hours. The compressor can be inspected under power.

Condition: ready for operation (used), Condition Used This listing is for a Jun-Air OF302 Application Oil-free compressor 25 liter pressure vessel mounted on frames incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Thermal protection - Integrated Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm Ciftzlq7Jm

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Ccudm7Ho7K Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2017, Condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll Inrtt0Y 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: used, Functionality: fully functional, Peak Scientific ZA035A Zero Air Generator. The ZA Range of Zero Air Generators is designed specifically for use as flame gas for GC Applications, which require zero air for operation. The catalyst chambers inside our Zero Air Generators make sure compressed air is stripped of all hydrocarbons before it is fed into your application. Dplvtp Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2024, Band width: max. 76mm Feed length: max. 76mm Band thickness: 0.076 - 1.91mm Speed: max. 195 strokes/min at full feed length Feed force: 205N with mechanical control valve or optionally as in the photo with electric valve (24V or 230V) also available in: Vog8H9R - Band widths from 38...400mm - Feed lengths up to max. 300 mm - Band thicknesses 0.05...3.18 mm

Condition: new, Year of construction: 2025, TFON Airwet Series Wet-Type Air Suction System: Units ensure workplace safety by preventing the risk of fire and explosion caused by sparks and dust during the deburring process, while also improving air quality. Dqrx9T This unit, which can be easily integrated into your machines, is a critical accessory for occupational safety.

Condition: ready for operation (used), Condition Used Cift9Tztob This listing is for a Jun-Air 6-J mini Air Compressor

Condition: used, Year of construction: 2000, operating hours: 38,789 h, Functionality: fully functional, Atlas Copco air compressor Max working pressure 7.5 bar Shaft power 15kW 375 kg Gross weight Dqtt3P

Year of construction: 1988, Condition: used, Compressor unit type 178 A CD E Delivery volume 4760 l min 9 bar operating pressure KW 30 B8Iffu7M

Condition: used, Functionality: fully functional, Whatman 75-72 Nitrogen generator with Jun-Air compressor Dpmjkd It is an essential asset for laboratories requiring high purity nitrogen for various applications. The user-friendly design simplifies the connection of a compressed air supply to the inlet of the nitrogen generator, making it a versatile and reliable option for a range of lab settings. This equipment is indispensable for applications such as gas chromatography, LC/MS, and sample storage preservation. Its ability to generate high-purity nitrogen supports critical analytical applications within diverse laboratory environments. Maximum inlet pressure 10 bar. Working temperature range 15 ° C - 40 ° C. Analog display for outlet pressure, working pressure and flow rate. Good working condition. Please check out our other listings as well.

Condition: good (used), Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h Freshline freezer MP “Air Products” Bslzhcig28G Type IQF 1220.15/3070 apte à surgélation à azote tout inox hauteur max. du produit: ± 100 mm capacité: ± 5.000 kg / h charge du produit (kg/mètre courant) : ± 13-14 kg / mètre courant 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatique : 1Nm3/h at 5-7barg LIN pression d'azote 3barg largeur nette du tapis ± 1.220 mm longueur nette du tapis ± 16.800 mm dimensions (lo x la x h) : ± 17.700 x 2.600 x 2.600 mm (ouverture max) at 5-7barg LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open)

Condition: used, Welding cell with 6-axis industrial robot FANUC ARC Mate Robot welding system with 2 welding stations SPS - Soudage Production Services type Cellule Junior - AIR LIQUIDE Serial. No. M 2075 Year of construction 2004 Without welding power source, without welding torch - Control Fanuc R-J3IB MATE type A05B-2443-B250 - Teach panel Fanuc A05B-2301-C335 - Control cabinet PLC with welding unit Interface Fronius ROB 5000 OC - 6-axis industrial robot FANUC ARC Mate 50i B 3L Robot arm reach 856 mm Movement speed: J1 140 °/s (2.44 rad/s) J2 150 °/s (2.62 rad/s) J3 160 °/s (2.79 rad/s) J4 400 °/s (6.98 rad/s) J5 330 °/s (5.76 rad/s) J6 480 °/s (8.38 rad/s) Movement range: J1 ±160° C9Yzgtq J2 +150° - 35° J3 +165° - 125° J4 ±190° J5 ±120° J6 ±360° Robot payload 3 kg Weight of robot only 47 kg - The entire system is designed as a compact welding cell. - Robot control cabinet fixed to the welding cell - Pneumatic turntable, rotation angle 180°, Ø 1200 mm with partition wall - one half of the turntable can be upgraded parallel to the welding cycle. - BINZEL nozzle cleaning machine with spraying system for non-stick agents - Binzel Abicor CAT2 robot holder (three-dimensional shut-off protection) - Operating manual for FANUC R-J3iB control unit Mains connection 3 x 400 VAC, 50 Hz Space requirement L x W x H 2700 x 1600 x 2200 mm Weight of the welding cell approx. 870 kg Good condition

Condition: as good as new (ex-display), We have two identical units, these were designed to blow the water off pouches and ready meal trays which had been through retorts. Could be used to remove water from other wet packed products. Bought new in 2016 and only used for trials. Bsem02Zk2Uc

Year of construction: 2001, Condition: used, Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor Bsb7S3Cezre -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Year of construction: 2015, Condition: excellent (used), - Multifunctional machine pasteurizer air condenser 40L - Model: R400 A SH - Dimensions (WxDxH): 600x750x1335 mm - Tank capacity: 40 liters - Water at maximum pressure: 0.6 MPA - Réfrigérant gas:R404A - Voltage: 400V - Serial number: 179342 - Year of manufacture: 2015 - Electronic controls Dppah9 - Semi-hermetic compressor - Air cooled condenser

Year of construction: 2015, Condition: excellent (used), - Multifunctional machine pasteurizer air condenser 40L - Model: R400 A SH - Dimensions (WxDxH): 600x750x1335 mm Dppacb - Tank capacity: 40 liters - Water at maximum pressure: 0.6 MPA - Refrigerant: R404A - Voltage: 400V / 3PH / 50Hz - Serial number: 179342 - Year of manufacture: 2015 - Electronic controls Dppacb - Semi-hermetic compressor - Cooling air condenser