Used Air Cooler for sale (27,289)

Condition: used, mileage: 362,217 km, power: 120 kW (163.15 HP), first registration: 01/2021, Year of construction: 2021, DB Sprinter 316 CDI Kiesling refrigerated box van with side door, Thermo King C 450 refrigeration unit - 2 units available (280,265, 362,754 km) - In very good condition! • Engine: 2.1 L - 120 kW CDI catalytic converter • Low emissions according to Euro 6 emissions standard • 6-speed manual transmission • Air conditioning • Cruise control • Speed limiter 120 km/h • Brake assist • Electronic brake-force distribution (EBD) • Driving assistance system: Crosswind assist • Anti-slip regulation (ASR) • Mercedes-Benz emergency call system • Fuel tank: Main tank 71 liters • Truck registration • Acoustic package • Navigation system for MBUX multimedia system • Airbag, driver's side • Heat-insulating glass • Storage compartment above the windshield • Seats in the cab: Driver's seat adjustable • Seat cover/upholstery: Fabric • Safety belt system with warning system (driver's side) • Seats in the cab: Passenger double seat • USB port in the center below the dashboard (charging function only) • Charging package dashboard (USB ports and 12V socket) Ledpfjzfxnzjx Af Sjrt • Communication module (LTE) for digital services • Rear wall paneling • Steering wheel (steering column mechanically adjustable) • Exterior mirrors, electrically adjustable and heated, both sides • Outside temperature display • Headliner in the cab • Automatic activation for headlights • DAB tuner (digital radio reception) • MBUX multimedia system (7" touchscreen) • Passenger-optimized center console (without storage compartment in the center console on the right) • Terminal block for electrical connections (driver's seat base) • 1 DIN slot in the front below the dashboard, passenger side • Maintenance interval indicator Assyst • Adaptive brake light • Headlight range adjustment • Side marker lights • Generator 200 A • Fleece battery 92 Ah • Front engine drive with support for additional refrigerant compressor • Fuel filter with water separator • Display for windshield washer fluid level • Towing eye, rear • Gross vehicle weight: 3,500 kg • Unladen weight: 2,590 kg • Payload: 910 kg • Wheelbase 3665 mm • Vehicle dimensions: 6,050 x 2,015 x 2,940 mm (L x W x H) • Suspension: Stabilization level II • Tires: 235/65 R16C • Tire tread: 6/7 / 3/3 KIESLING - Deep-freeze box van • Type: Cooler Flitzer • Internal dimensions: 3,310 x 1,850 x 1,900 mm (L x W x H) • Side door on the right • Rear portal doors • Floor: Diamond plate • Lashing rails on the left and right, in the center • Stop rails at the bottom • Rear steps THERMO KING refrigeration unit, type: C 450 MAX • Suitable for deep-freeze applications • MINUS 20° Celsius! • Refrigeration while driving and when stationary! • Temperature recorder - First owner! - German vehicle! - TÜV/AU (technical inspection/emission test) upon request and for an extra charge: new! Errors and prior sale excepted!

Year of construction: 2018, operating hours: 8,580 h, condition: used, functionality: fully functional, machine/vehicle number: E21SI18102702508, This is a combination oven, model SCC 201 WE Elektro, from the premium manufacturer Rational. The unit has undergone a thorough inspection in our in-house workshop, has been fully refurbished, and is in perfect working order. The unit has accumulated 8580 operating hours. The recommended retail price is €21,940.00 (net) / €26,108.60 (gross). The stated price is gross, including 19% VAT. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device model? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or iCombi Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. Lsdpfx Aoz Etknsf Ssrt High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked and fully functional – or your money back. Flexible shipping or self-pickup options. Competent advice - before and after the purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. This combination oven offers space for 20 x 1/1 GN containers. In automatic mode, the unit independently recognizes the ideal cooking process, the size of the food, the quantity being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport WxH: 925x1900mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SI18102702508 Year of manufacture: 2018 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal insertion: 1/1, 1/2, 2/3, 1/3, 2/8 GN Servings per day: 150-300 Condition: Used, inspected, fully refurbished, in perfect working order. Additional information: In combination oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control - self-cleaning. Core temperature probe. Handheld spray nozzle with automatic retraction. 8.5-inch color display and touchscreen. 5 fan speeds programmable. Integrated, maintenance-free grease separation system. Automatic start time preselection. 7 cleaning levels for unattended cleaning - even overnight. Spraying can be adjusted in 3 levels - from 30°C to 260°C. 5 programmable fermentation levels. USB interface. Seamless, tub-shaped hygienic cooking chamber, rounded corners. Halogen cooking chamber lighting. Shipping: Delivery or self-pickup by arrangement. Worldwide shipping upon request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Riedel Lrsdpfszix Nasx Af Sot Type: PC 251.1L4WE.I Riedel Process Chiller PC 251.1L4WE.I water-cooled – 25.6 kW – 400 V For sale is an industrial liquid/process chiller from Riedel Kooling, type PC 251.1L4WE.I. The unit is water-cooled (WE) and designed for precise, reliable cooling tasks in industrial applications. Important note: This is not an air-cooled unit. Operation requires an external cooling water circuit (e.g. dry cooler, cooling tower, or building's chilled water system). Additional information: Ideal for machine cooling, process cooling, industrial applications Technical data: Manufacturer: Riedel Kooling Type: PC 251.1L4WE.I Year of manufacture: 2013 Cooling type: water-cooled Refrigerant: R407C Cooling capacity (net): approx. 25.6 kW Temperature range of cooling medium: approx. +12 °C to +20 °C Setpoint tolerance: ±2 / ±1 / ±0.5 K Pump pressure: 3 bar (optional 5 bar) Nominal flow rate: approx. 3.6 m³/h Tank volume: approx. 200 liters Electrical data: Power supply: 3 × 400 V Frequency: 50 Hz Phases: 3-phase Rated operating current: approx. 14.6 A Power consumption: approx. 10.3 kW (with 3-bar pump) Protection class: IP54 Dimensions & weight: Dimensions (W × H × D): approx. 1,872 × 2,005 × 874 mm Weight (net): approx. 390 kg Condition: used Scope of delivery: (see photo) (Specifications and information subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg Lrsdpfx Aeda Sf Iof Sst

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Tank capacity Ledpfx Ajy Ifmref Ssrt Tank capacity 2 x 100 l Tank surface galvanized Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain

Year of construction: 2018, condition: excellent (used), - volume flow: up to 1200 m³/h - elektric: 3-Ph. 400 V - 50/60 Hz - power: 1,5 kW (IE3) - current: 2,3 A Lredpfx Ajg Ipn Tof Sjt - protection class: IP54 - noise: 70 dB

Condition: used, mileage: 952,652 km, power: 338 kW (459.55 HP), first registration: 01/2019, fuel type: gas, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, Equipment: ABS, electronic stability program (ESP), * Multifunction steering wheel Lredpfx Aexn Hmqjf Set * Air conditioning * Cooler box * Second sleeper berth * Adaptive cruise control * Hill start assist * Lane departure warning * Air suspension ----Internal vehicle number 10666-----Errors & interim sale reserved WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: new, Year of construction: 2026, The Josan S21 is a compact, robust, and powerful wheel loader with full equipment at an attractive price. With a lifting capacity of approximately 1,200 kg and a low overall height, it is ideally suited for low entrances, halls, stables, and farm work. Despite its compact design, the S21 features a spacious full cab with heating and ventilation. With an unladen weight of only approximately 2,200 kg, the wheel loader remains comparatively light and can be easily transported on a suitable trailer. The wide cab provides comfortable working conditions and good all-around visibility. ‼️ IN STOCK ‼️ AVAILABLE FOR ON-SITE INSPECTION ‼️ OUR COMPONENTS ✅ Nationwide FREE delivery to your farm! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier that also sells to high-end wheel loader manufacturers. This ensures sensitive and precise raising and lowering of the pallet fork. Feel free to test it on our premises! ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc., are treated in this way. This provides extreme rust protection, which is INCLUDED! ✅ NEW! Larger luxury cab for more legroom. With reinforced steel, we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight ✅ NEW! LIFTING CAPACITY approx. 1200 kg! ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by experts in our own workshop ✅ We stock all spare parts in Gemmrigheim. This allows us to ship parts within 24 hours. ✅ We have our own factory in China! ✅ Continuous monitoring during the production process ensures very high quality. ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe). Technical data: ➡️ Unladen weight ONLY approx. 2200 kg ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): approx. 4200 x 2200 x 1600 mm ➡️ Euro 5 engines ➡️ All-wheel drive ➡️ Cab width approx. 1.25 m ➡️ Internal cab height approx. 1.35 m ▶️ Tipping height approx. 2.85 m ➡️ New with large comfort cab (internal width approx. 1.10 m) ➡️ Articulated steering ➡️ Adjustable steering column ➡️ Large all-round view ➡️ Hydraulic oil cooler ➡️ UVV NEW 1 year ▶️ Additional control lever to regulate the tilting speed of the bucket/fork ➡️ Automatic engagement of creep and fast speed ▶️ 2-stage torque converter transmission, electrically controlled ➡️ Electric joystick for forward and reverse movement with thumb on the joystick ➡️ Wide tires 31/15.5/15 AS profile (Note: only the narrow tires are shown in the picture) ➡️ 3rd and 4th control circuits with separate small joysticks ➡️ Float function ➡️ Safety belt ➡️ Bucket Optional: ➡️ AVAILABLE IMMEDIATELY! Combined pallet fork with attachment and tines (We have 1.20m tines and two spears, length approx. 90cm) Lredpfx Afeufwyzj Sot ➡️ Euro attachment with hydraulic locking pins ‼️ We also have a wide range of accessories, from bale clamps and crocodile jaws to snow plows! Just ask. Net price €12,999.00 +19% VAT €2,469.81 Gross price €15,468.81 Errors and omissions excepted Images/text may vary *Please inquire about our warranty conditions.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, oil tank capacity: 1,200 l, total length: 3,500 mm, total width: 2,400 mm, total height: 6,000 mm, overall weight: 45,000 kg, installation height: 1,000 mm, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-ton Hydraulic Tryout/Testing Press for Toolmaking and Forming Technology The machine is a tryout/testing press for tools in the field of forming, deep drawing and toolmaking. It is fully functional, ready for operation and can be inspected and tested while powered on. The press frame consists of a 4-column construction, a generous working area and a hydraulic system with REXROTH pump technology. The control system is a SIEMENS S7-1200 with a touch panel and extensive parameterization options. Scope of delivery & Accessories Tool sliding and lifting ball system GÜTHLE Hydraulic foot pedal (GÜTHLE) Roller bolster/carrier console 10 t (GÜTHLE) 4-channel tool clamping system (length 1500 mm, 2 t per channel) Complete REXROTH hydraulic unit Air cooler Condition of the machine Fully functional Hydraulic system is leak-free and runs smoothly Control system & electrical components in good condition Mechanically sound, no visible damage The machine is in assembled condition and can be demonstrated while powered on. Press force: Nominal force: 500 t Max. press force at 250 bar: approx. 510 t Dimensions & Weight: Overall dimensions approx.: 3500 × 2400 × 6000 mm Total weight: approx. 45,000 kg Working area: Table area: 2000 × 1500 mm Column spacing (internal): 2000 × 900 mm Installation height: 1000 mm Stroke: 800 mm (linearly adjustable via linear measuring system) T-slots available (mounting positions to be defined by customer) Hydraulic system: Main cylinder Number: 2 Piston Ø: 340 mm Rod Ø: 280 mm Auxiliary/planing cylinder Number: 2 Piston Ø: 120 mm Rod Ø: 70 mm Draw cushion Force: 150 t Cylinder: 2 × Ø 310 × 210 mm Stroke: 400 mm Pumps and tank Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min Hydraulic tank: 1200 L Oil system: 1000 L filling capacity Speeds Forward stroke: 120 mm/s Return stroke: 150 mm/s Working/pressure stroke: 12 mm/s Lredex D Tv Depfx Af Sjt Control & Safety: Control system SIEMENS S7-1200 + ET200S 12" Touch Panel Schneider Electric Operating modes: Two-hand automatic mode Setup mode Single stroke Stroke without draw cushion Deep drawing mode with draw cushion Measuring & safety components Linear measuring system Novatechnik (63 Bit) for ram and draw cushion Light barriers SICK at the front and rear (height: 1050 mm) Side protective grilles with limit switches Remote maintenance via Ethernet possible Mobile control panel International Note Block (DE/EN) German Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel or loading assistance. Collection only by prior appointment. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony/ Germany

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Travel range X-axis: 1,000 mm Travel range Y-axis: 800 mm Travel range Z-axis: 700 mm Year of construction: 2001 Control system: HEIDENHAIN TNC 426 / 430 Machine type: 5-axis vertical machining center Machine model: UCP 1000 Travel ranges and movements: X-axis: 1,000 mm Lrodpfx Afsztp Nfs Sjt Y-axis: 800 mm Z-axis: 700 mm Rapid traverse rate: 30 m/min Max. working feed rate: 10 m/min Spindle and tool changer: Spindle speed: max. 15,000 rpm Spindle shank: HSK-A63 Tool magazine: 30 positions Max. tool weight: 8 kg Max. tool length: 300 mm Table and axes: NC rotary table: diameter 800 mm Table rotation speed: 12 rpm Max. workpiece weight: 1,500 kg Number of controlled axes: 5 Additional features: Spindle torque: 127 Nm (at 40% duty cycle) Axis force: 10,000 N (X and Y/Z) Coolant system: Internal and external coolant Coolant air: through the spindle Measuring probe: Renishaw Tool laser measurement: Blum tool setting and breakage detection Viewing window: 1 x Rotoclear Spindle cooling: Separate spindle cooler Manual rinsing system for the interior

Condition: used, Used Hosokawa Alpine ZPS 315 for sale. Was used for powder coatings. Lsdjwdvt Uspfx Af Sjrt Includes filter, cyclone, rotary valves, control cabinet, air intake cooler, and much more.

Condition: new, Year of construction: 2026, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Lrodpfx Afoxdbubj Sot Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: new, Iveco X-way 260T58, Wheelbase 4800 mm, ADR all classes, Refrigerator unit, Automatic gearbox, Intarder-Retarder, Rear-view camera, Air conditioning, Additional stationary air conditioning, Webasto heater, Radio with Android Car Play, Navigation system, Sun visor, Fog lights, Air-suspended driver and passenger seats, 1 axle 8 tons. Fully equipped, fitted with new Bob Italev 26-ton hooklift system, ADR-compliant, with tilting function, Oil cooler heat exchanger, Hydraulic front and rear axle lock, Vertical roller, Hydraulic system for crane body and trailer, Maximum body length 7200 mm. Lodpfx Aexp Hzksf Sort

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves Lrodex D Nl Iopfx Af Set • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Lodeyy Hgqepfx Af Sjrt Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, Year of construction: 2024, operating hours: 698 h, functionality: fully functional, machine/vehicle number: APP889037, overall weight: 3,500 kg, total length: 5,760 mm, total width: 1,987 mm, total height: 1,973 mm, motor manufacturer: Cummins B6,7, power: 231 kW (314.07 HP), fuel type: diesel, volume flow: 19 m³/h, pressure (max.): 25 bar, Equipment: type plate available, We are offering this used Atlas Copco X-Air+ 750-25 reciprocating compressor, manufactured in 2024, for sale. Model: X-AIR+ 750-25 Max. operating pressure: 25 bar Speed: 1920 rpm Engine power: 231 kW Permissible total weight: 3500 kg Support load: 70 kg Axle load, axle 1: 1765 kg Axle load, axle 2: 1665 kg Serial number: APP889037 Lrodpfsz A Dauex Af Set Date of manufacture: 05/2024 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1990, condition: used, pressure 100 t throat 260 mm stroke 300 mm table-size 500 x 500 mm ram head dimension 650 x 500 mm dayligth 700 mm oil volume 600 l Lredpeb U Hvajfx Af Sst capacity of ejector in table 40 t return capacity 13 t total power requirement 22 kW weight of the machine ca. 7 t dimensions of the machine ca. 2.07 x 2.48 x 3.3 m - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available

Condition: good (used), Year of construction: 1995, Engine: JGC312 with 551 kW (year 1995) - Turbocharger overhauled 4,000 hours ago - Additional oil cooler – 3 years old - Cylinder head – new in 2017 - Charge air cooler overhauled 4,000 hours ago - Exhaust manifold – new in 2021 - Complete engine overhaul in 2017 Lodpfxsvcm Nfj Af Ssrt Offer is made without guarantee of availability.

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Lodpfx Afszbnmgo Sort Mesh belt 250mm wide Machine dimensions 1800mm Long x 800mm Wide Price € 6,950

Condition: good (used), Year of construction: 1970, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 1000 L -Operating pressure: 11 bar Lodpfxjzyt Avj Af Ssrt -Dimensions: 900/1000/H2350 mm -Weight: 322 kg

Condition: new, overall weight: 249 kg, input voltage: 400 V, We offer a brand new, unused Güntner dry cooler, complete with an independent temperature control system featuring fan speed regulation. This unit is typically used to dissipate heat from a process or system into the surrounding air without using water. It is suitable for applications where a closed water/glycol circuit needs to be cooled. Ledpfx Ajzl H Dwjf Sert

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Ljdjzi R R Nspfx Af Sjrt Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm Lodpfexab Ugex Af Sjrt * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: used, mileage: 85,900 km, power: 315 kW (428.28 HP), first registration: 04/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2016, total length: 7,300 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Special equipment: Front axle load 9.0 t, trailer brake 2-line, audio system: CD radio (Bluetooth), exhaust pipe pointing downwards to the right, battery 220 Ah, batteries arranged one above the other, electrical pre-installation in the cab 24V / 100 A, suspension: front springs 10.5 t, 3 leaves, rear lights LED, rear axle differential 300, info display 12.7 cm with video function, interior filter for construction site vehicles, air intake from the front, air compressor 2-cylinder, engine PTO at the rear, pump SAE B, engine compartment encapsulation reinforced, oil cooler for transmission, auxiliary drive MB 131-2c, programmable special module, spare wheel, reversing warning system audible (warning signal outside), rear crossmember reinforced, protective plate under the main tank, circuit breaker, seats in the cab: driver's seat comfort suspension seat, seats in the cab: driver's seat backrest foldable, seats in the cab: center seat with safety belt, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on the front axle), stowage flap on the outside left, 12V socket in the passenger footwell, additional 24V socket in the passenger footwell, stone guard, preparation for reversing camera, seat belt warning system Additional equipment: Emission standard EURO 6, axle configuration: 4x2, trailer socket 24V / 15-pole, Arocs, exhaust pipe pointing outwards to the right, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit medium, cab: width 2.30 m, cab: cab entry movable, cab: tilting device hydraulic, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 170 mm, cab: mounting height 600 mm, suspension: leaf / leaf, suspension: rear springs 11.5 t, stiff, suspension: front springs 7.5 t, 3 leaves, power windows, windshield tinted, generator 100 A, gearbox 12-speed - type: G 230-12, urea tank (AdBlue): 60 L, hydraulic pump (Meiller pump - 5 pistons - 255 / 1), interior filter: pollen filter, body/structure: tipper, body variant: standard, comfort locking system, fuel tank: 290 L steel, left, power steering pump unregulated, air intake behind the cab, air dryer heated, engine 10.7 L - 315 kW R6 diesel (OM 470), engine brake, auxiliary drive MB 121-2c, wheelbase 3900 mm, ramp mirrors, waste heat recovery, disc brakes with full protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger multi-adjustable seat, stabilizer rear axle, stabilizer front axle, socket in the cab 24V, tachograph / EG control unit, underrun protection at the rear fixed, preparation for CB radio, preparation for toll collection, front axle straight, water pump regulated, permissible total weight 18.00 t, oil cooler for transmission 2x trailer coupling Meiller tipper body Chain spreaders Mounting plate Municipal hydraulics Loading crane "HMF" with remote control Lredpsz Ed Ahjfx Af Sot Errors, typos and prior sale reserved Inspection only possible by prior appointment

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 278 kg, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 67 dB, Equipment: documentation/manual, OIL-LUBRICATED SCREW COMPRESSOR BRAND: FIAC Model: AIRBLOK 15 Maximum Pressure: 10 bar Free Air Delivery (FAD): 1400 l/min Maximum Amperage: 21.1 Ljdjz Ei Txopfx Af Sert USED MACHINE INTERNAL CODE: SVR 443