Used Agie Evolution 2 for sale (147)

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible. Hsdpsvc Ha Rjfx Ap Hsnt

Condition: used, Year of construction: 2005, AGIECUT Challenge 2 eCut Hnsdpfjua Uzfex Ap Hjt Year of construction 2005 TECHNICAL DETAILS X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 256 mm U/V axis: ±70 mm Cone angle: 30°/100 mm Cutting rate: > 300 mm²/min Quality: Ra 0.1 µm Thread height: 250 mm Tapping die: 1/2 mm Wire diameter: 0.1 - 0.33 mm Workpiece height: 250 mm Workpiece width: 550 mm Workpiece length : 750 mm Workpiece weight with/without bath: 200 / 450 kg MACHINE DETAILS Bath size : 700 l Dimensions : 2215 x 2215 x 2220 mm Net weight : 3600 kg

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 430 mm Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Hodpfsy Ed E Isx Ap Hent Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device

Year of construction: 1995, condition: ready for operation (used), Generator: Agiepuls 60 HSF, travel X/Y/Z: 350mm/250mm/350mm, table dimensions X/Y: 600mm/450mm, max. workpiece weight: 400kg, max. workpiece dimensions X/Y/Z: 840mm/600mm/250mm, max. electrode weight: 100kg, machine dimensions X/Y/Z: approx. 2450mm/1750mm/3000mm, weight: approx. 4000kg. The machine has PCB damage. Documentation available. An on-site inspection is possible. Hnedjyugmfepfx Ap Hjt

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] - C axis : 0 - 100 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] - Machine height : 2.680 [mm] - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT Hedswl Rh Nepfx Ap Hsnt - CNC : AGIEVISION 5 - Workpiece loading / unloading robot - Spindle nose : EROWA - Dielectric capacity : 600 [l]

Condition: repair required (used), Year of construction: 1987, EDM sinking machine, manufacturer AGIE, type: EMT 1.20, year of manufacture: 1987. Travel ranges: X 250 mm, Y 160 mm, Z 200 mm with R3 adjustable head. Further details can be found in the data sheet. Hedpoix Nqhjfx Ap Hsnt

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Hnjdpsw Rqu Sefx Ap Hot

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Hnjdpfx Apjv Dkvrs Het Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Hjdpfjx Uxgljx Ap Hjnt Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection Hnodpfx Ajwqcm Ujp Hjt The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Condition: used, table length 400 mm table width 300 mm Hnodpjvwgq Sofx Ap Hst x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 009, travel distance X-axis: 420 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 350 mm, Tool changer; Hnsdjr Iid Ejpfx Ap Hst Tank - 900x600 mm Stroke - 420x320x350 mm

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, machine/vehicle number: 395.900.219.1159, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, table length: 800 mm, overall weight: 4,150 kg, GF AgieCharmilles FORM E 600 – Die-Sinking EDM Year of manufacture: 2019 Operating hours: approx. 900 h The machine is in excellent, fully functional condition. It has been used only for a very limited number of test and trial operations and has never been used for continuous serial production. Technical specifications: Hjdpfx Apjzyn E Ej Hont X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 800 x 600 mm Maximum workpiece size: 1,000 x 700 x 400 mm Maximum workpiece weight: 1,000 kg Positioning resolution: 0.1 μm Best surface finish: Ra 0.2 μm Generator current: 140 A Dielectric tank capacity: 650 l Integrated C-axis Maximum electrode weight on C-axis: 25 kg Maximum C-axis rotation speed: 80 rpm AC FORM HMI with 19" touchscreen ISPG (Intelligent Speed Power Generator) Glass scales on X/Y axes EROWA ITS-50 automatic chuck Electrode changer Fire protection system 6 integrated filter cartridges Power supply: 3 x 400 V, 50/60 Hz Compressed air: 6–8 bar LAN connection: 10/100 Mbit/s Machine dimensions / weight: Machine height: 2,700 mm Machine weight: approx. 4,150 kg The machine is currently located at our facility in Kocaeli, Turkey and is available for inspection. Additional photos, videos, and further information are available upon request.

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Hnjdow Sxx Iepfx Ap Hst

Condition: used, Year of construction: 1981, functionality: unexamined, Due to the dissolution of the department, an AGIE EMS 3 die-sinking EDM machine is available. The machine was still in operation until 12 months ago, but is no longer needed and is now stored disassembled. It is sold complete, including tank, filtration unit, 2 barrels with original fluid, as well as various tools and copper electrodes. Suitable for hobbyists or professionals—also a good source of spare parts, as these parts are becoming increasingly scarce. Loading with forklift is free of charge, whether you want the complete unit or just specific parts. Collection is preferred, but shipping with a freight carrier is also possible. Price upon request. Hodpjxtq Najfx Ap Hent

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP Hedpjzgu Igsfx Ap Hont year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Makinesi (Wire EDM) Hnjdpfszxrh Ujx Ap Hot

Condition: like new (used), Year of construction: 2014, AGIECHARMILLES FORM 300 wire EDM machine, manufactured in 2014. Travel: X 600, Y 400, Z 450. Table: 750 x 600 mm. Work tank dimensions: 1,220 x 870 x 470 mm. Linear guides. Maximum workpiece weight: 1,600 kg. ISPG 80 A generator. EROWA ITS head. C-axis. 6-electrode changer. Hjdpfx Aszd D Nhep Hent EROWA rotating spindle, 1,150 RPM, with a set of collets. Dielectric fluid tank: 700 liters. Filtration system with 6 paper cartridges.

Condition: excellent (used), Year of construction: 2024, operating hours: 142 h, functionality: fully functional, machine/vehicle number: 395.900.219.1428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, total height: 2,858 mm, total width: 1,600 mm, total length: 2,845 mm, table width: 800 mm, table length: 400 mm, workpiece length (max.): 1,000 mm, workpiece height (max.): 400 mm, input voltage: 400 V, overall weight: 4,050 kg, year of last overhaul: 2026, Equipment: documentation/manual, For sale: AGIE CHARMILLES FORM E 600 EDM sinker machine (2024) We offer an AGIE CHARMILLES FORM E 600 EDM sinker machine from 2024, in very good technical and visual condition. Machine specifications: Manufacturer: AGIE CHARMILLES Model: FORM E 600 Year of manufacture: 2024 Type: EDM (electro-discharge machining) sinker machine Equipment: FORM E 600 sinker EDM center Hnodpfx Apszclpnj Hot - System 3R Macro electrode holder - Automatic 6-position electrode changer - High-speed C-axis - Heat exchanger - EMC/CE compliant version - Set of reference balls - Chiller - SPD surge protection system - System 3R 3R-656.21-SP03 measuring probe with a Ø 3 mm measuring ball - System 3R-628.31-S starter kit - Set of transport locks The machine is ready for operation and is an excellent solution for demanding applications in electro-discharge machining. We provide assistance with machine loading. If you have any questions or would like to obtain additional information, please contact us by phone or email.

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Hodpezbimhsfx Ap Hsnt Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: excellent (used), Year of construction: 1997, operating hours: 16,100 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 3,000 mm, total width: 1,700 mm, total length: 2,840 mm, table width: 600 mm, quill travel distance: 500 mm, type of input current: three-phase, table length: 800 mm, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, overall weight: 3,500 kg, tank capacity: 550 l, Equipment: documentation/manual, Agie Compact 3 CNC EDM machine for sale. 1997 machine Fitted with System 3R Macro chuck on C axis. 10 station tool changer Hsdpfx Apjzhwy Uj Hsnt 16100 machining hours Macro - mini chuck shown in picture not included in sale

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: * extensive spatial travels * large dielectric capacity Hnodpfswwrk Nox Ap Hot * ability for taper cutting * robust CNC control system.

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Hsdpsm Amf Defx Ap Hsnt Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Hnjdswwq S Sjpfx Ap Hjt Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: Hjdowwrtwepfx Ap Hsnt * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, * accuracy within a few µm, * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.