Used Adjustable Fence for sale (22,238)

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment Blodpfxsumpq No Amren - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Bjdewzmu Rjpfx Amrjln Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: reconditioned (used), Number of milling spindles 2 St. fence ja ja /nein workpiece ja STEGHERR Cross-bar Milling Machine, Type KSF-mini ----- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERR's extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors; workpiece clamping is pneumatic. Bjdpfx Amozip Nwsreln The profile cutter is designed to match the web width. The saw blades that perform the lap-joint cut can be adjusted to the profile cutter's dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. - Motor: 2.2 kW, 380 V, 50 Hz - Pneumatic pressure: 6 bar Includes: ----- - Machine stand - Foot pedal control - NEW ORIGINAL stop rail with scale and sliding stop featuring an optical setting aid, as shown in the photos. Tools as shown in the photos: 1 Profile cutter 3 Saw blades (corresponding to a web width of 10 mm) Footprint approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg ----- (All technical specifications provided by the manufacturer; no liability assumed!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Blodpfehy Tlrox Amrsn • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, planing width: 530 mm, tool diameter: 125 mm, number of blades: 87, rotational speed (max.): 4,700 rpm, total length of planing tables: 2,900 mm, total width: 1,380 mm, total height: 850 mm, overall weight: 800 kg, Equipment: CE marking, Surface planer DMA with spiral cutterhead, 3 rows, 87 indexable inserts, insert dimensions 15x15x2.5mm. Infeed table 1625mm, outfeed table 1230mm, cutterhead diameter 125mm, cutterhead speed 4700 rpm. Working height 850mm. Robust fence, adjustable in depth and swiveling 90°-45°, inclination is easily readable from the front, thanks to round bar guidance and additional roller bearings, allowing for smooth adjustment. Fence dimensions 1300x170mm. Dust extraction port diameter 160mm, maximum chip removal 8mm. Bsdjz Eyp Ropfx Amreln Swiveling control panel located at eye level on top. Chip removal adjustment via scale with manual setting. Stable steel-gray cast iron construction guarantees precision and durability. The machine is run-in before delivery.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 745-006-1, total height: 4,050 mm, ram adjustment: 60 mm, total width: 1,650 mm, total length: 3,000 mm, drop-through hole in table: 160 mm, pressing force: 100 t, distance between side stands: 420 mm, overall weight: 16,000 kg, year of last overhaul: 2014, Raster die-cutting machine Stroke rate: 20 - 220 Table area: 700 x 1000 Stroke adjustment: 20 - 90 mm Unidor Compact Press CE 2014, complete system Weight: approx. 16,000 kg Accessories: Raster roller feed Kemmerich strip feeding system Bsdpfjz Ekvusx Amroln Safety fence

Condition: new, Year of construction: 2026, Welcome to Maschinenhandel Knipfer We would be happy to arrange a viewing of the machines on our premises by appointment. We are not always on site, so please call or write to us in advance. ━━━━━ Made in the EU. New machine, top quality! - CE marking - 7.5 kW main motor - Scoring saw - Swiveling electrically - 45° - Height adjustment electrically - Max. cutting height: 155mm - Sliding carriage can be locked in various positions - Wide and narrow dust extraction hood, quick to change - Max. saw blade diameter: 350mm - Extendable table extension on the crosscut fence - Crosscut fence extendable up to 330cm - Edge trimming shoe - Clamping device - Miter gauge - Weight: 1100kg - Sliding carriage 320cm x 40cm - Cutting width at the parallel fence 125cm - Dust extraction port 120mm - Speed indicator ━━━━━ CONTACT & CONSULTATION ━━━━━ Your contact person: Johannes Knipfer Tel.: Gewerbegebiet Ost 25a 92353 Postbauer-Heng ━━━━━ Bjdomx R Efepfx Amreln IMPORTANT NOTE All information is subject to change without notice. Technical changes reserved by the manufacturers. Price changes, interim sales and printing errors reserved. Prices apply to collection. Shipping possible for an additional charge and by arrangement. Illustrations may show optional equipment that is not included in the price. A forklift is available for loading.

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Bsdpfxod Akygs Amrjln Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Blodpfx Aoit I Sbsmrjn Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: Blsdpfx Amjcrnm Nsron saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. Bjdpfeg Dgr Hex Amrsln sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Bledpfoz Eh Nrex Amren Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: excellent (used), For sale is a used Record Power thickness planer with a planing length of 1110 mm. The machine has been inspected by our qualified technicians and is in very good condition. Technical data: - Planing width 265 mm - Planing table length 1,110 mm - Stock removal per pass 3 mm - Planing fence, adjustable up to 45° - Cutterhead diameter 75 mm - Max. thickness 190 mm - Feed rate for thicknessing 5 m/min - Motor 1.7 kW / 2.3 HP / 230 V - Dust extraction port 100 mm - Weight 162 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Related terms: Planer, thicknesser, surface planer, planing, thicknessing Reference: R-M61I4 Bjdpfxsz E Hx Eo Amrsln

Condition: excellent (used), Catalog number 7834 TECHNICAL DATA - max. diameter of the main blade without a scoring blade: 400mm - max. diameter of the blade with a scoring blade: 350mm - max. cutting height for a 350mm blade: 100mm Blsdpfjzxhhdjx Amren - main blade adjustable up/down and at an angle - large blade guard - spindle diameter: 30mm - with a crosscut fence - cutting length on the fence: 1400mm - cutting width with guide: 1180mm - with a side fence - guide on the side fence adjustable at an angle - with a scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 20mm - power of the main blade motor: 4kW - scoring blade motor: 0.75kW - 2 types of rotation speeds - table dimensions: 1120x1020mm - table dimensions with extension: 1820x1720mm - diameter of the dust extraction port: 130mm - dimensions (L/W/H): 3650x2150x1450mm - weight: 720kg ADVANTAGES – Polish production – with a scoring blade – DTR documentation – used saw, very good condition Net price: 11900 PLN Net price: 2767 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, Year 2003 Machine is fully controlled by PLC, almost all settings can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, a second set of cutters is available, various indexable inserts are available. Maximum panel thickness approx. 48 mm, edge banding from 0.3 - 15 mm possible. Chain conveyor renewed approx. 10 years ago. Spray system for separating and cleaning agents, controlled by the application. -Jointing fence, motor-driven, program-controlled. -Jointing cutters 1961, 2 x 2.0 kW. -Gluing system, cartridge type 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. -Pressure unit 1903 MOT, pressure of the first and other rollers can be adjusted separately. -Miter saws 1918, bevel cut adjustable. -Flush trimming 1823. -Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel). -Profile cutting blade 2 mm 1929, pneumatically timed. -Corner copying unit 1983, carbide tipped, with adjustment on the control panel, functional, but needs further fine-tuning. -Straight cutting blade 1964. -Swivel unit, controlled by the application. Includes all operating manuals, documentation of the operating points digitally and in printed form by Holzher technicians. A set of DIA jointing cutters is also included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, Year 1995 Mounted on the machine with connection to the pressure bridge. Easily adjustable from the front control panel, with a rotating device for parts. Adjusted to the feed rate, sensors still available from HOMAG. Bsdpfxsz Dxh Nj Amroln -Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. -Sale only to commercial enterprises, machine is currently powered and in operation. Price is negotiable. Machine available after clarification in December / January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: new, Catalog number: S 0335 - New machine, in stock - CE certificate Blodpfxszh H N Es Amren PLANER: - Work table dimensions: 1500 x 320 mm - Max. cutting depth: 5 mm - Dimensions of the aluminum guide rail, mm: 1100 x 155 JOINTER: - Work table dimensions: 316 x 600 mm - Max. cutting depth: 3 mm - Cutting speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Milling head speed, min-1: 5600 - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with a ground surface, * Tables with precise adjustment for longitudinal planing, * Stable aluminum guide rail (fence) with the ability to tilt from 90° to 45°, * Milling head guard, * Work table for the thickness planer with a central guide column and carriage, * Power on/off without stopping the machine, * Mortising machine with left-hand rotation. Net price: 14,500 PLN Net price: 3,372 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Blsdozdza Djpfx Amrjn Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Bedpfx Amozhm Dporsln Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Bjdpezqyxxjfx Amreln Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2005, Working width: 630 mm Planer shaft: strip knives Number of knives: 4 Jointer table length: 2200 mm Jointer fence angle adjustable: yes Folding up jointer tables: manual Maximum thicknessing height: 220 mm Thickness table height adjustment: electric Display of planing thickness: scale Feed speed: 7 / 14 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: segmented Table rollers: yes Bedpfx Amjyvz Nxjrjln Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2200 mm Machine width: 1150 mm Weight: 1250 kg

Condition: new, Year of construction: 2026, Working width: 530 mm Planing cylinder: Tersa Number of knives: 4 Jointer table length: 2300 mm Adjustable angle of the jointer fence: yes Raising of the jointer table: electric Maximum stock removal thickness (thickness planer): 250 mm Height adjustment of the thickness table: electric Bsdpjzqyw Uofx Amreln Display of the planing thickness: digital Feed rate: 5 / 7 / 9 / 12 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: continuous Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Dust extraction connection: 140 mm Machine length: 2300 mm Machine width: 990 mm Weight: 750

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 11,000 kg, workpiece weight (max.): 11,000 kg, feed rate X-axis: 600 m/min, feed rate Y-axis: 200 m/min, spindle motor power: 11,000 W, product height (max.): 455 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 200×3200 – 200 T – MTP-3212 – 4 AXES X,Y1,Y2,R+V The brand-new MTP 200×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its heavy-duty welded frame, advanced CNC control system, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup for both single-part and high-volume manufacturing. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system (Germany) • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches Blsdpfozg Ebwjx Amren • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2530 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 11,000 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES X,Y1,Y2,R+V The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X and Y axes • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) Bodpfozg Dk Dex Amrjln • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. TECHNICAL SPECIFICATIONS • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES Y1, Y2, X + V The brand-new MTP 125×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 6 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: Blodpfx Amjzg H Ewsrsn • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Maximum sheet thickness: up to 6 mm • Pressing force: 125 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 7,400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: used, Year of construction: 1991, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, overall weight: 1,100 kg, Equipment: saw blade guard, scorer, Altendorf F45 Panel Saw – Year of Manufacture 1991 For sale is an Altendorf F45 panel saw, year of manufacture 1991. The machine is equipped with electric height adjustment and electric tilting adjustment of the saw unit, thus offering comfortable operation for precise cutting work directly above the control panel. The machine is operated via the upper control unit. In addition, the F45 features a scoring saw and the proven Altendorf Duplex fence. Equipment: - Manufacturer: Altendorf - Model: F45 - Year of Manufacture: 1991 - Machine No.: 91-09-280 - Main motor: 5.5 kW - Scoring saw motor: 0.75 kW - Electric height adjustment Blodpjz Ig Niefx Amron - Electric tilting adjustment - Upper control - Scoring saw - Altendorf Duplex fence - Digital parallel fence, manually adjustable - Max. saw blade diameter: 350 mm, larger possible without a riving knife. - Panel sliding table - Rip and miter fence The machine shows signs of wear and tear commensurate with its age and is in used condition. The robust construction of the Altendorf F45 makes it a proven panel saw for use in carpentry and woodworking businesses. Inspection and test run possible by arrangement.