Used Adhesive Application for sale (8,009)

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Discharge tap Design: Container Remarks: Frame made of Fe (galvanized) Overall width: 1,220 mm Overall height: 1,550 mm Overall length: 1,020 mm Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: Chemicals TANK Type of base: Frame Djdpoyclkxsfx Ac Nekh EQUIPMENT Manhole / Dome: in the top head (DN 400) Outlet: available Note: slight residual adhesions, signs of use

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Discharge tap Design: Container Dodpfxeyclkrj Ac Nokh Remarks: Frame, Fe (galvanized; some braces slightly bent) Overall width: 1,230 mm Overall height: 1,650 mm Overall length: 1,030 mm Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: chemicals TANK Base type: Frame EQUIPMENT Manhole / Dome: in upper head (DN 400) Discharge: present Note: slight adhesions, signs of use

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: discharge valve Design: container Remarks: frame made of Fe (galvanised) Overall width: 1,220 mm Overall height: 1,560 mm Overall length: 1,020 mm Location: Bremen Nameplate: Volume: 1,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: solvent Djdpeycli Iofx Ac Nskh CONTAINER Base design: frame EQUIPMENT Manhole / Dome: in the top plate (DN 400) Outlet: 16 mm Note: minor adhesions, signs of use

Condition: used, tank capacity: 1,000 l, GENERAL Dksdpfxeyck Hlj Ac Noh Equipment: disc valve, crane lugs Design: container Remarks: one of the containers has an additional outlet (25mm) with disc valve in the cylinder (see photo) Outer diameter: 980 mm Inner diameter: 974 mm Total height: 1,830 mm Location: Bremen Nameplate: Capacity: 1,000 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,090 mm Last application: pharmaceutical industry VESSEL Bottom: conical bottom Feet type: standing on feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: on top (DN 400) Outlet: 40 mm Note: slight adhesions

Condition: used, tank capacity: 420 l, GENERAL Equipment: Level indicator (without guarantee), spray head Design: upright Remarks: 2 sight glasses in the cylinder are missing; feet made of painted Fe (with reinforcements made of V2A); an additional pipe with a diameter of approx. 25 mm branches off from the outlet pipe (see photos) Internal diameter: 890 mm Total height: 1,850 mm Agitator: propeller Location: Bremen Volume: 420 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 560 mm Last application: pharmaceutical TANK Support type: feet Number of feet: 3 pcs EQUIPMENT Outlet: 48 mm Note: slight residues/adhesions AGITATOR Agitator arrangement: offset in the top cover Agitator equipment: Agitator data no longer readable; in addition to the propeller at the bottom there is a type of flow breaker (see photos) Dodpfeyckdqsx Ac Nskh

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: ball valve Design: container Remarks: Frame, Fe (galvanised); manhole diameter approx. 390 mm; ball of the ball valve made of plastic (presumably Teflon) Total width: 840 mm Total height: 1,610 mm Total length: 1,240 mm Location: Bremen Volume: 1,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: protective coating TANK Base design: frame Dkedpfx Acjyci U Uj Nsh EQUIPMENT Manhole/dome: in the top head Outlet: 22 mm Note: slight adhesions, signs of use

Condition: used, tank capacity: 100,000 l, GENERAL INFORMATION Features: Ventilation / Deaeration Design: Vertical Remarks: Sloped conical bottom for drainage towards outlet (installation requires concrete foundation on site); total height estimated according to drawing (minor deviations possible); Cylinder wall thickness: 4/3/2.5 mm Internal diameter: 3,350 mm Total height: 12,500 mm Agitator: Agitator flange Dkjdpfx Acsyci Nle Nsh Location: Outdoor storage Technical documentation: Drawing Nameplate: Volume: 100,000 litres Product-contact material: V2A 1.4301 (AISI 304) Condition: Used Cylindrical height: 11,500 mm Previous application: Caustic/Acid/Neutralisation tank (wash water) TANK Bottom: Flat bottom with slope EQUIPMENT Manhole / Dome: In cylinder (approx. 350 x 450 mm) Outlet: 100 mm Note: Slight residues/adhesions AGITATOR Agitator arrangement: Mounted laterally on cylinder TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Top wall thickness: 3 mm

Condition: like new (used), Year of construction: 2020, The Easymount EM-1200DH is a wide format double hot roller laminator engineered for both laminating and mounting applications. It supports hot and cold lamination, allowing you to laminate prints and graphics, mount prints to boards, and apply vinyls, tapes, and adhesives. Key features include: - Maximum lamination width of 1200 mm (47 inches) - Laminating speed of up to 3.9 meters per minute - Mounting thickness capability up to 25 mm (1 inch) - Variable speed settings for precise process control Dkodoych Utepfx Ac Neh - Reverse mechanism for correcting lamination errors or jams - Heat-assisted rollers for consistent, high-quality results This machine is suitable for mounting wide images with sheet film and for continuous mounting with roll film, providing versatility for various print finishing requirements. It is designed to be durable and reliable for professional use in wide-format finishing environments.

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 7,920 mm, workpiece height (max.): 60 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Dsdpfxsx Emf Dj Ac Nokh Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Year of construction: 2016, condition: good (used), Coating head with unwinder. Application: coating with water-based acrylic adhesives. Dkedpfsyf Ebiox Ac Njh

Condition: new, functionality: fully functional, Year of construction: 2025, total length: 3,000 mm, total height: 2,000 mm, Industrial 3D Printer – Sinuprint 3000 A state-of-the-art solution for large-format additive manufacturing, tailored for molds, design elements, composite parts, and structural components. Dksdpfx Aowgkqtsc Neh Sinuprint 3000 combines robotic flexibility with CNC precision, making it the perfect choice for industries requiring robust and scalable 3D printing. Applications range from mold making and shipbuilding to interior design and custom large-scale structures. Key Specifications: Printing system: CEAD E25 or S25 extruder (configurable to customer needs) Robotic arm: COMAU N-170, 3 m reach, 160 kg payload Control system: Siemens SINUMERIK ONE – full CNC control for unmatched accuracy Software compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: Brand new machine Optional add-ons: Heated print table for improved adhesion and print quality Note: Standard configuration includes the CEAD E25 extruder. Software is not included but can be supplied as an optional accessory.

Condition: used, Year of construction: 2010, functionality: fully functional, Single-sided edge banding machine in full configuration, incl. a total of 3 interchangeable glue application units, 1 of which for PUR adhesive Material dimensions: Roll material: - Paper and plastic edges: 0.3 - 3.0 mm - Veneer edges: 0.5 - 3.0 mm - Strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine’s equipment: Infeed guide rail, automatic adjustment via program Release agent application Joint trimming unit with 2 motors, each 4 kW Blow-off nozzle for removing loose particles Gluing unit with 1.8 L glue application, with QUICK-LOCK with single roll/strip magazine 1 main pressure roller and 3 follow-up pressure rollers Automatic pressure zone adjustment via program End trimming unit with 2 motors, 660 W, swiveling 0 to 8 degrees Corner rounding / copy milling unit with 2 motors, 180 W and 2 motors, 400 W Max. workpiece thickness 60 mm Max. feed speed 20 m/min Automatic adjustment via program Profile scraping unit Glue joint scraping unit Cleaning agent application Buffing unit with 2 motors, 180 W Djdpfxjybbays Ac Nekh Control system ICOS open TS, PC-based

Condition: new, Year of construction: 2026, PUR adhesive unit as retrofit for edge banding machines, with integrated pre-melter, for achieving a permanent invisible joint (zero joint). Symmetrical device, hence suitable for both left- and right-handed machines. Dodpfxoyba Uio Ac Nokh Adhesive roller diameter: 25 mm. Significantly reduced maintenance and cleaning effort thanks to PTFE coating of all assemblies (except the adhesive roller). Adhesive does NOT need to be drained from the adhesive reservoir at the end of production. Suitable for flexible production capacities. Application in parallel feed direction. Generally adaptable to all common machine manufacturers: - For BRANDT machines - SCM Olympic series - BIESSE AKRON series Application height up to 60 mm Low application quantities (

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Djdpjyfgrpefx Ac Njkh Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: good (used), MPS EF 410 - 8 color Label Printing Machine Ref.: FGT 25-230 We are pleased to present this 2008 MPS EF 410 - a high-precision, versatile UV flexo press designed for a wide range of applications. The MPS EF 410 model is a servo-driven, 410mm wide, multi-substrate press, capable of running self-adhesive materials as well as unsupported plastic films. With robust features and premium components, this machine is engineered for reliable, high-quality production. _____ Key Specifications & Configuration - Printing Width: 410 mm - Technology: Servo-driven UV flexo press - Substrate Handling: Spiral rollers and chill drums for multi-substrate versatility _____ Machine Features - Unwind Unit with Lift - Web Guide & Splice Table - Teknek Web Cleaner - 8 Flexo Printing Units for optimal color flexibility - Automatic Registration Control ensuring precise alignment - Delam/Relam with Web Turn Bars - enables printing of 2 colors on reverse side - Anti-Static Bars across the web path - 9 GEW UV Dryers providing efficient curing _____ Enhanced Finishing Capabilities - Full Rail System allowing for tool movement along the press - Overlamination/Cold Foil with UV drying for premium effects - Double Die Station: o 1 x K&B Gapmaster Die for advanced control o 1 x Tecnocut Electronically Adjustable Anvil - Dual Web Inspection Cameras (Top & Bottom) - Razor Slitting for precise edge cutting - Waste Matrix Rewind and Product Rewind units _____ Additional Equipment & Accessories - Impression Cylinder Sets (x8): Sizes include 68, 72, 74, 77, 78, 80, 84, 88, 90, 93, 96, 99, 102, 104, 108, 114, 120, 128 - Magnetic Cylinders: Sizes include 136, 144, 148, 154, 160, 168, 176, 180, 93, 96, 99, 102, 104, 114, 120, 128 - 22 Anilox Rolls in various sizes for consistent ink distribution _____ Technical and Optical Condition: Dkodpfx Acou Rdgbs Nsh - Technical: 9/10 (checked and in excellent running condition) - Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms Dkodpfx Ajvwkhnjc Noh  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitters  Rewinders  Splice table

Condition: new, 3 mm Total length 4122 mm Dkjdpfovwd Uuox Ac Noh Feed speed 10 m/min. with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter • Integrated control cabinet • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm Dkjdpfx Acjyaa Utj Neh • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Height-adjustable for pressure control. The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: new, Year of construction: 2025, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. Djdpfsyaabasx Ac Nokh This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: good (used), Year of construction: 2009, Exclusive Offer for OMET VARYFLEX VF 530 F1 🌟 🔹 Color/Webwidth: 8 x Flexoprinting / 530mm 🔹 Brand: OMET 🔹 Year: 2009 _____ ✨ Features at a Glance ✨ 📄 Designed for Versatility This advanced printing line is perfect for self-adhesive labels on a variety of materials, from paper to plastic films! 🎨 🎛 Unwinder & Web Cleaner Includes a single-side contact web cleaner and corona treatment for optimal material preparation. 🎨 8 Flexo Printing Units with Sleeve Technology Dsdpfxju Ik Uye Ac Nskh Complete with 8 pull-out ink cassettes for easy color changes. Plus, a reverse printing kit on the 1st unit! 💡 UV Drying & Cold Foil Capabilities Equipped with 8 GEW UV lamps and a cold foil unit on sliding rails for metallic effects and high-end finishes! 🔧 Die-Cutting & Finishing Two rotary die-cutting stations with a hoist for quick magnetic cylinder changes. Plus, a longitudinal scissor cutting unit with 4 knives for precise slitting. 📸 Inspection system BST Eltromat camera for real-time monitoring and a vision system for accurate register control. _____ 💼 Included Equipment 💼 🟢 Complete set of sleeves Various sizes of cliché sleeves and holders, designed for seamless compatibility and versatility. 🌈 22 Anilox Cylinders Multiple line counts and volumes for flexible ink application and printing quality. ⚙️ 4 Magnetic Cylinders Ready to meet diverse cutting and finishing requirements with sizes Z120, Z135, Z168, and Z176. _____ 📝 Ready to Take Your Label Printing to the Next Level? 📝 This OMET VARYFLEX VF 530 F1 from 2009 offers premium performance, flexibility, and all the tools needed for professional label printing.

Condition: good (used), The HOMAG KL 78 is a high-performance single-sided edgebander designed to meet the needs of industrial production. With advanced technology and versatile configuration, this machine is ideal for quickly and precisely processing panel edges with excellent quality. Main Features: - Homatic Numerical Control for intuitive and precise operation management. - Grinding Units to ensure perfect surfaces. - Gluing Unit with Pre-Glueing for uniform adhesive application with minimal waste. - Edge Pressure Unit for a stable and durable finish. - Double End Trimmer for fast and precise edge finishing. - Overlapping Double Refiner for smooth and flawless edges on both sides of the panel. - Multi-function Rounder for complete and detailed edge processing. - 0°/90° Milling Group for highly precise and finished edges. - Edge Scraper and Glue Scraper for a flawless cleaning and perfect finish. - Brushes for thorough cleaning and surface finishing. Dkedjuh Acaspfx Ac Neh - Available Space for Additional Units for further customization. - Spare Tool Groups for easy and continuous maintenance. With the HOMAG KL 78, every edging operation is made simple and fast, boosting production efficiency without compromising on quality.

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar Dodpfx Ajum Hufec Nekh * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: new, functionality: fully functional, power: 4.3 kW (5.85 HP), gearing type: other, fuel type: gasoline, color: red, empty load weight: 150 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Heat Air Lance HL-1 | Professional Asphalt Heat Tool – Road Repair, Crack Sealing & Surface Preparation Equipment The TICAB Heat Air Lance HL-1 is a high-performance gas-powered heat lance designed for asphalt surface preparation, crack cleaning, preheating joints, weed removal, asphalt softening, and bitumen reheating. A must-have asphalt heat tool for road contractors, paving crews, municipalities, utility companies, and surface maintenance professionals seeking efficient heat applications and improved bonding results. Key Features • Heat air lance / asphalt heat tool for asphalt warming, crack prep, and surface softening • High-temperature flame output for consistent heating of asphalt, bitumen, and sealing joints • Gas-powered design for mobile, flexible operation on job sites Dodsx U Ayvopfx Ac Njkh • Ideal for pre-repair heating, loosening old asphalt material, surface drying, and bitumen melting • Compact, lightweight, and easy to handle for precision work in tight spaces • Durable construction built for heavy-duty road maintenance applications Applications • Asphalt surface preparation before crack sealing or patching • Preheating asphalt joints and edges for improved sealant adhesion • Weed removal and surface cleaning ahead of maintenance • Softening old asphalt, bitumen reheating, and material conditioning • Municipal roads, highways, parking lots, driveways, sidewalks, bike paths, and industrial areas Why Choose TICAB HL-1 The TICAB Heat Air Lance HL-1 combines powerful heating performance, mobility, and precision to deliver superior asphalt surface prep and crack sealing readiness. It is designed to improve sealant adhesion, accelerate repair workflows, and enhance overall pavement maintenance quality — making it a trusted choice for contractors and municipal crews focused on efficient, professional road repair results. Contact us now for price, delivery options, and full technical specifications. Boost your asphalt prep and repair workflow today!

Condition: new, functionality: fully functional, gearing type: other, fuel type: diesel, color: green, axle configuration: 1 axle, emission class: none, Year of construction: 2026, Equipment: low noise, TICAB Bitumen Emulsion Sprayer – 200 L / 500 L | Professional Asphalt Repair Equipment TICAB Bitumen Emulsion Sprayer 200 L and 500 L is a reliable and efficient solution for road maintenance, asphalt repair, pothole patching, crack sealing preparation, and surface dressing. Designed for professional use, this bitumen sprayer ensures uniform application of bitumen emulsion, asphalt emulsion, tack coat, and bonding agents, significantly improving adhesion and extending pavement service life. Key Advantages: • Tank capacity options: 200 liters / 500 liters • Precise spraying system for even and controlled application • Suitable for bitumen emulsion • Ideal for road repair companies, municipalities, contractors, and utility services • Compact, mobile, and easy to operate • Reduces material consumption and labor costs • High-quality components for long service life • Manufactured by TICAB – proven European road equipment manufacturer Typical Applications: • Pothole repair and patching works • Crack sealing preparation • Asphalt bonding layer before paving Dodpfex Uxfuox Ac Nskh • Surface dressing and maintenance works • Road, parking lot, driveway, and industrial area repairs TICAB Bitumen Emulsion Sprayers are a cost-effective choice for companies looking for professional asphalt maintenance equipment with excellent performance and durability. Contact us for price, availability, delivery options, and technical details.

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NB875A is a professional 2-in-1 edge banding solution that combines straight edge banding and Soft Forming technology in a single machine – perfect for handleless doors and modern furniture fronts. Equipped with a complete set of pre-milling, heating, pressing, and finishing units, NB875A delivers flexibility, high productivity, and premium edge quality. Its fully automated control system and intuitive software allow fast switching between 14 different profiles (full C, left/right J, concave center, concave left/right, W-shaped, diamond profiles, etc.). Dkodpfx Acjxcwrmo Njh Key Highlights Multi-functional machine for both straight and softforming edge banding in one pass. 14 profiles available, automatically switchable via servo control. Energy-saving function – automatic standby mode after idle time. Advanced industrial control PC with 24” touchscreen, online connectivity, optional barcode reader. Fully enclosed machine with sound-absorbing material for low-noise operation. CE certified, international brand electrical components. Working Units & Equipment Pre-milling unit with 2 electro-pneumatic motors, H35 mm cutters. 2 sets of J & C profile milling units (4 motors – 7.5 kW + 3.5 kW) with automatic switching. Panel pre-heating + 2 glue application units (panel + edge). Softforming & pressing station with precision steel rollers and band pre-heating system. Servo-driven tape feed & pneumatic end trimming (Ø180×3.5×60T saws, 12,000 rpm). Rough & fine trimming units, radius scraping & flat scraping. Double buffing units for a perfect glossy finish. Independent dust extraction hoods (9 × Ø125 mm) for all processing units. Automatic lubrication system and full safety protection (panel thickness detection, feed monitoring, E-STOP). Technical Specifications Minimum panel size: 300 × 150 mm (central concave ≥ 400 mm) Panel thickness: 18 mm (straight), 18–25 mm (softforming) Edge band thickness: 0.5–0.6 mm (softforming), 0.5–1.2 mm (straight) Feed speed: 8 m/min Power supply: 380V / 50Hz Air pressure: 0.7 MPa Installed power: 68 kW Net weight: approx. 6,000 kg Machine dimensions: 11,015 × 1,000 × 1,940 mm Applications Production of handleless doors for kitchens, wardrobes, and bathroom furniture Complex edge banding operations in medium and large-scale production Premium edge finish with invisible glue line Advantages for Manufacturers Maximum versatility: one machine for all straight & softforming edge banding profiles. Superior finish: smooth edges, perfect glue adhesion. High efficiency: automatic operation, quick profile changeover. Cost reduction: fewer machines required, minimal downtime.