Used Acoustic Enclosures for sale (1,305)

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Ndodpfx Afohbyr Sofef Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: ready for operation (used), Year of construction: 2020, This 6-axis Kawasaki BA006L-A welding robot was manufactured in 2020. It features a high-performance Fronius power source and a two-axis positioner, housed in a safety-compliant enclosure for operator protection and process stability. The robot offers a maximum payload of 6 kg and a reach of 2036 mm, ideal for precise and automated MIG/MAG welding tasks. If you are looking to get high quality welding capabilities consider the Kawasaki BA006L-A machine we have for sale. Contact us for more information. Application Types Nedpfx Aex E Ea Toffedf Welding

Year of construction: 2021, condition: new, −−−− Panel Data −−−− − Type of panels: Particle board, MDF − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design Ndsdei Dylfopfx Affef − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system − "Industry 4.0 ready"

Year of construction: 2016, operating hours: 860 h, condition: used, machine/vehicle number: B00070081, Differential lock ,Hydraulics (power take off) ,Cabin ,Top tilt ,Pallet fork ,Standard bucket ,UVV. Wheel loader Gehl AL750 K, SN B00070081, 5.0t, 55 kW/75 hp, commissioning 06/17, year of construction 2016, approx. 860 bstd. Ndedpjk Twcrofx Affef Technical data according to manufacturer: Transport length: 4,443 mm Total height: 2.476 mm Height of bucket pivot point 3,474 mm Dump height at full lift: 2,710 mm Turning radius with bucket: 4,159 mm Outer turning radius: 3,409 mm Buckling angle: 45 (also at full lift height) Engine: Deutz TD 3, L4/4 74,3 hp, 55 kW Static tipping load with bucket straight: 3.587 kg bent: 2.779 kg (at full steering angle) Static tipping load with pallet fork straight: 2,882 kg folded: 2,271 kg (with full steering angle) Breakout force with bucket attached: 5,906 kg Operating weight: 4,953 kg Liter capacity with standard auxiliary hydraulics: 69.5 L/min at 200 bar With a weight of 5 tons, the 750 is one of the largest wheel loaders in Gehl's product range. With its articulated steering and speeds of up to 20 km/h, this powerhouse works absolutely agile and swiftly. The inching pedal offers maximum precision in regulating speed while providing the full power needed to lift the load. The articulated joint enables a tight turning radius. Quick turning maneuvers increase cycle times and provide excellent maneuverability in tight spaces. A switch on the joystick activates the differential lock on the front and rear axle for maximum traction, for example when picking up material. These machines offer one of the strongest breakout forces in their class, allowing you to fill the bucket to the top every time for increased productivity. Auxiliary hydraulics are standard equipment and are operated by a toggle switch integrated into the joystick. Also operated by toggle switch are lift arm and auxiliary hydraulics pressure relief. Equipment - AL750 with cab incl. door/discs and heater - 4-point hook pick-up - hydraulic - Standard auxiliary hydraulic circuit with leakage oil line and pressure relief valve - Z-kinematics with mechanical parallel guidance and return-to-dig function - 2-speed hydrostatic transmission - Floating position for lift and tilt cylinders, with engage function - Tiltable operator's platform - Differential lock (hydraulically activated, front and rear) - Mechanical articulation lock (according to SAEJ276) - Inch pedal - 405/70R20 143B with wheel arch cover Wide-base industrial tires - Particulate matter reduction system (PMS) and oxidation catalyst (Oxykat, DOC) - Electro-hydraulic interlock lift mast - Battery disconnect switch - Emergency lowering valve for mast - Digital display with acoustic and visual signals - Multifunctional joystick - Steering column, adjustable in inclination and height - Drink holder - Horn - Mechanically suspended driver's seat, 7-way adjustable - Adjustable armrest - Removable rubber floor mat - 12-volt socket in the armrest - Exterior mirrors, left and right - Reversing lights and brake lights - Working light (LED) with StVZO - bucket 2000 mm with teeth, 1,04m³, 12mm Hardox scraping edge - pallet fork All offers subject to change, at the factory, used machines bought as seen, without warranty, subject to prior sale. All prices plus 19% VAT. Our general terms and conditions apply. The sale of new and

Condition: new, axle configuration: 4x2, wheelbase: 4,100 mm, fuel tank capacity: 90 l, color: white, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, Model description: IVECO Daily 50C15VH /Euro 3 Highroof Van H3 Wheelbase 4100 MY2024 Light Duty Code Diesel Type: 50C15/E3 V Gear Box Type: Manual Gearbox 06 + 01 reverse Front Axle: 2100 Kg Rear Axle: 3700 Kg Nsdpfx Afow Dun Refodf Drive Hand: LH Drive Dimension: 7274 x 2052 x 2938 mm Inside height: 2100 mm Inside Length: 4680 mm approx Internal width: 1740 mm engine power: 146 E3 SLIDING SPARE WHEEL CARRIER 270 DEGREE REAR DOORS DRIVERS AND PASSENGERS AIRBAG AND SEAT BELTS 170CC COMPRESSOR FOR AIR CONDITIONING ALTERNATOR 180 A (12) ACOUSTIC COMFORT KIT SYSTEM ABS 9 / ASR 9 " EXTRA THIRD KEY WITH REMOTE CONTROL" " DAY LIGHTS MANUAL OPENING SIDE DOOR ENGINE GEARS 3500 REAR MULTILEAF SPRING GEARBOX 2840.6 O.D LOADS 2100 - 3700Kgs EURO 3 (HD) 2 SEAT BENCH WITH 3 POINTS SEATBELTS STEEL WHEELS REAR AXLE RATIO 4.44 REAR STEP SUSPENSION STANDARD STANDARD HEADRESTS VAN REAR WALL WITHOUT WINDOW CENTRAL PARKING BRAKE MANUAL AUTORADIO PREPARATION REAR VIEW MIRRORS FOR BODY WIDTH UP TO 2,200 MM REAR AXLE RATIO 4.44 SPEED LIMITER 90KM/H SIDE SLIDNG DOOR OPEN STORAGE + USB (CHARGE) STANDARD MODEL BADGING ATERMIC GREEN TINTED WINDSCREEN = More information = Empty weight: 2.600 kg Carrying capacity: 2.600 kg GVW: 5.200 kg

Year of construction: 2005, condition: good (used), functionality: fully functional, For sale is a Steinhauer eCAB WorkCenter in good and well-maintained condition. The machine has seen little use and is fully functional. Viewing and testing can be arranged by appointment. If you have any questions, we will be happy to assist you. Ideal for professional switchgear cabinet production, suitable for milling and drilling mounting plates, doors, and enclosures. Technical highlights: - Precise CNC machining center designed specifically for switchgear cabinet construction - Suitable for steel, aluminum, and plastic panels - Automated processing of mounting plates, cabinet doors, and enclosures - High repeat accuracy and easy operation via user-friendly software - Ideal for both single-unit and series production - Year of manufacture: 2005 Condition: - Well-maintained, ready for operation - No known technical defects Scope of delivery: - eCAB WorkCenter including control unit Nodpfx Ajx Il Nyeffsdf - Accessories and tool holder - Documentation / software license - Year of manufacture: 2005 - PC software update: 2019 In 2019, the PC was renewed (Windows 10) to ensure compatibility with Eplan Propanel.

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 5 axis (DRIVE 5C +) Gantry-drive (axe X) machine Numerical Control Control (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 10 Table dimensions (mm) 1250 Clamps for workpieces fixing - Pneumatic Kit powerClamp-clamping element - K Table Automatic Tools Changing System Tools storage plate (No. of folds-positions) 14 Max. useful working area (X - Y - Z) mm 6175 x max mm 1550 x mm 300 N° 2 Working areas - Vacuum pump (capacity m3/h) 2 x 100 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes. Total installed power (50 A) WORKING GROUPS (TOP): N° 9 Independent vertical boring spindles (High Speed 7500) N° 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Ndsdpfx Aenzhwhsffjf Drilling head motor-power (Kw) 1,5 N° 1 Vertical electro-spindles HSKF63 DRIVE 5C +. Vertical electro-spindles motor power (KW 10)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, Control Unit Brand FANUC Model iSeries Table Table load 400 kg Main Drive Number of axis 4 Spindle Speed 10000 RPM Tool taper BT 40 Movement Nedex E Egaopfx Affjdf X-Axis Movement 800 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. Application Types Milling

Condition: good (used), mileage: 427,713 km, power: 350 kW (475.87 HP), first registration: 10/2021, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2021, Equipment: AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, traction control, - Adaptive cruise control - Aluminum fuel tank - Front work lights - Heated mirrors - Bluetooth - Power brake booster - Roof spoiler - Remote central locking - Low noise - Speed limiter - Intarder - Air suspension Ndsdpex Ilr Iofx Affof - Air horn - Panoramic roof - Particulate filter - Radio/CD player - Sliding sunroof - Sleeper cab - Side door - Seat heating - Voice control - Auxiliary heater - Toolbox Suspension: Air suspension Front axle: Steering Curb weight: 8,190 kg Payload: 10,810 kg Gross vehicle weight: 19,000 kg Technical condition: Good Optical condition: Good Reference number: 52 Vehicle number: 52 Mercedes Benz Actros 5 / 1948 Mirror CAM / BigSpace / Retarder / Full Air Suspension / Euro 6d .: W1T9634041C036210 Suspension: Air / Air (Full air suspension) Transmission: Automatic Air conditioning Retarder Engine brake Cruise control Auxiliary heater Distance-keeping assist Lane-keeping assist Navigation system Emission standard EURO 6d Wheelbase 3.70 m 2 x Tank 990 L Special equipment: Over-windscreen storage compartment with lid, 15-pin trailer socket 7+7-pin, work lights, Economy equipment package, Climate equipment package, Safety equipment package, exterior mirror camera MirrorCam, interactive multimedia cockpit, aluminum compressed air tank, air horn, electrical pre-installation in cab 24V / 100A, 12-speed gearbox - Type: G 281-12, 3-piece mudguard, fuel tank: combo tank aluminum - 660 L diesel + 75 L urea solution (AdBlue), fuel tank: additional 330 L aluminum tank, right, coolbox / refrigerator, radiator grille shutter, regulated power steering pump, roof and side air deflector (lockable), mounting plate / saddle plate 12 mm for fifth wheel coupling, reinforced engine brake, parameterizable special module, wheelbase variant 3700 mm, frame overhang 1050 mm, smoker package, retarder, acoustic reverse warning (external warning signal), fifth wheel coupling: manual lubrication, additional remote control key (2), fleet management system interface, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver's seat velour, cab seats: driver's comfort suspension seat, cab seats: foldable driver's seat backrest, external sun visor, side window sun shade, driver's door, storage compartments with lid behind driver and passenger seat, external storage flap left, additional 12V / 15A socket in passenger footwell, additional 24V socket in passenger footwell, carpet on engine tunnel, cab door extension, sleeper cab curtain, auxiliary water heater Further equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 8.0 t, Actros 5, Actros cab S / M, heated approach/front mirror, high trailer electric and brake connection, trailer socket 24V / 15-pin, cab entry left, exhaust outlet right side, rear axle differential lock, torque increase 12th gear, compressed air connection in cab, compressed air unit with condensate monitoring, medium compressed air unit, automatic headlight activation (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), driver assistance system: Lane keeping assist, cab: cab entry...

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump without legs The unit is in full working condition and is ready for immediate use Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance Nedpfx Ajxv Da Reffjdf 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids

Year of construction: 2017, condition: good (used), Weisshaupt Single-Column Freight Lift The Single-Column Lift: A Multitalented Solution The first stage of the modular system is the ESL, or "Single-Column Lift." The name says it all: the ESL is a lift system with one lifting column, along which a transport cage travels. The ESL has a standard load capacity of 500 kg. The standard transport cage has internal dimensions of 1000 mm x 1600 mm (external dimensions 1100 mm x 1700 mm) and offers space for a Euro pallet with a pallet jack. It features a flat floor (15 mm thick with a ramp on the loading side of the lowest floor), which allows for easy access and eliminates the need for a floor recess. The cage enclosure is 1100 mm high and made of robust welded wire mesh. The ESL is designed as a fully enclosed, self-propelled lift system as standard. Each floor has its own access doors and all necessary fixed enclosures made of machine guards. The access doors are integrated into the system and can only be opened when the conveyor cage is in front of them, thanks to an electric safety lock. Convincing advantages! ... Easy planning thanks to a modular system Space-saving and low-wear chain drive No special structural modifications required Approach ramp or shallow pit depth Stepless height adjustment up to 12 m All column lifts are designed for continuous operation (S1 motor) Electro-mechanical drive (geared motor + chain) No separate machine room required Very quiet operation Ndodpfx Afjx Ihpijfjf No trained personnel required (unlike forklifts) Reduces downtime due to accidents and illness Low maintenance Suitable for outdoor installation Manufactured in accordance with Machinery Directive 2006/42/EC and DIN EN 81/31 for walk-in freight elevators, including all floor access doors and required machine guard enclosures. ... Locking device Duplex chain drive with 8-fold safety factor Electromechanical motor brake Chain tension sensor Electrically interlocked floor doors Optional active overload protection Upper emergency limit switch Thermal motor protection Maximum load capacity: 500 kg Lowering/lifting speed (standard): 4.2 m/min Connection specifications: 400 V (3PH+N+PE/50Hz) Control voltage: 24 V Starting mode: Soft start / soft stop Motor specifications: S1 motor (continuous operation) Year of manufacture: 2017 Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Ndsdeu Tg Uqepfx Affef Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: ready for operation (used), Year of construction: 1990, Main Drive Spindle motor power 115 Kw Number of axis 2 Additional Equipment Chip Extractor Complete Enclosure Cooling System Work Light Self-Centering Chuck Diameter: 2500 mm (removable) Refrigerated Electrical Cabinet Nedpfox E Ebkjx Affjdf This KOLOMNA 1532T vertical turning machine was manufactured in 1990. It features a robust design suitable for a variety of turning operations. If you are looking to get high quality turning capabilities consider the KOLOMNA 1532T machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control PC85 - Software woodWOP Njdjr Ai Sqopfx Affodf Safety cabin (enclosure) of the working head Working table with pods and rails- No. 10 Support rails (lenght mm 1500) LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 folds) + (No. 3 folds) Max. useful working area (X - Y - Z) mm 6000 x max mm 1600 x mm 125 No. 4 Working areas - 2 x Vacuum pump (capacity m3/h) Separate electric and command cabinet Total installed power (Kw) 27,5 (ca.) WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (High Speed 7500) No. 10 Independent horizontal boring spindles (No.6 in X-axe + No. 4 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. Vertical electro-spindle: HSK63 Vertical electro-spindles motor power KW 9

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Ndsdpfxjhvahhe Affjf Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,65 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Milling grooving Unit 2 x FB 30 (Kw 5 x 2) 0 - 90° Profile Scraping unit (Multi-profile, by N.C.) RBK - 503 (2 POSITIONS) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Nedpfolkdpmex Affjdf Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Ndedott Iudepfx Affof Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Nsdpfx Aet N Ix Roffodf Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) Nsdjw Dc Niopfx Affedf No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), movable working head. Vertical position of the panel (workpiece) Numerical Control TPA - Software Albatros Safety cabin (enclosure) of the working head Panels feeding by motorized chain/track Rubber-coated vertical rollers as fence and feeders during workpieces process In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) With workpiece return system to the operator (180°) Min. useful working area (X - Y - Z) mm 260 x 40 x 10 (ca.) Max. useful working area (X - Y - Z) mm infinite x 1300 x 80 (ca.) Separate electric and command cabinet Total installed power (Kw) 35 WORKING GROUPS: Drilling heads with vertical spindles (No.) 1 Ndedpoihfiisfx Affsf Independent vertical boring spindles (No.) 24 (7 in X + 17 in Y) Drilling heads with horizontal spindles (No.) 2 Independent horizontal boring spindles (No.) 36 (9 LEFT + 9 RIGHT = 18 x 2) Drilling head motor-power (Kw) 3 x 3 (ca.) Vertical electro-spindle (No.) 1. Vertical electro-spindle motor power (Kw) 7,5 (ca.) Automatic Tools Changing System Revolver, with Tools storage plate (No. of folds-positions) 10

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Numerical Control ( CNC) NC 21, Software Homatic Safety and sound-proof enclosure Nodpfx Ash Nx U Noffjdf No. 3+3 Vertical columns to support the working units Min. useful working width (mm) Max. useful working width (mm) 3000 Max. useful working tickness (mm) 100 (ca.) Max. depth of the panel (mm) for automatic infeed 1250 Distance between center-axes of the disappearing dogs (mm) 1000 Adjustable (min/max) feeding speed (m/min) 8 - 25 (ca.) No. 4 Working groups (for each machine's side): 1 Jumping Scoring Unit (1 x Kw 1,5 ca.) 1 Hogging Unit (1 x Kw 4,5 ca.) 1 Jumping Milling Unit (1 x Kw 4,5 ca.) 1 Free Space

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer Safety and sound-proof enclosure - OPTIONAL No. 4+4 Vertical columns to support the working units Min. useful working width (mm) 150 (ca.) Max. useful working width (mm) 3100 (ca.) Max. useful working thickness (mm) 180 (ca.) Distance between center-axes of the disappearing dogs (mm) 500 (ca.) Adjustable (min/max) feeding speed (m/min) 8-40 (ca.) Njdpfx Asifz H Neffjdf No. 8 Working groups (for each machine's side): 1 Jumping Scoring Unit 1 Hogging Unit 1 Jumping Milling Unit 1 Milling-Shaping unit 1 Corners Rounding unit (contour trimming) with 2 vertical motors 1 Belt sanding unit (with abrasive disc) 1 Belt sanding units (with abrasive papers)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) Nedpfx Aofz I Ufjffsdf WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control NC 21 / HOMATIC Adjustable feeding speed (m/min) 15 - 50 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) LEFT SIDE: Jumping Milling Unit (for grooving) SF 20 (Kw 6,6 x 1) 0°-90° RIGHT SIDE: Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "A" (1 + 4 rollers) Snipping (end-cutting) unit HL 04 (2 x kW 0,18) Rough Trimming unit 2 x Kw 0,55 (0°-35°) Njdpfjhvi E Isx Affedf Multi Function Unit (Profile contour Trimming unit) FK 11 - 2 x Kw 0,4 Profile edge scraping unit PN 20 Glue scraping unit (Pneu) Buffing unit (2 x Kw 0,25)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Nedpfx Aouhv R Deffjdf Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25