Used Acoustic Enclosures for sale (1,637)

Condition: used, mileage: 556,659 km, power: 350 kW (475.87 HP), first registration: 07/2020, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, color: red, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle No.: 118-26 Mercedes-Benz 2548 Actros L 6x2 BDF Low Liner Body: Interchangeable body / Sales van with shelving and tarpaulin Matching tandem trailer available at an extra cost! First registration: 07.2020 Hfjdpfx Aaezbv Ixj Esi * 2 x bunk beds * 1 x seating area * Cool box * 2 x tank 500+500 liters * Lift axle * Tire tread approx. 50-60% * German vehicle TANDEM TRAILER ACKERMANN available at an extra cost! Special equipment: Airbag driver side, alarm system, trailer stabilization program TSA, work lights, audio system: digital radio DAB / DAB+, lowered exhaust system, equipment package: Driving, equipment package: Climate, equipment package: Comfort, equipment package: Media, equipment package: Visibility, equipment package: Storage space, batteries arranged one above the other, brake connection standard and DuoMatic, additional air reservoir, air horn, electrical pre-installation in the cab 24V / 100 A, driver assistance system: turning assistant, cab: with air suspension, cab: shaving mirror, cab: smoke detector, transmission 12-speed - type: G 281-12, holder for notebook, folding table in the bulkhead, comfort telephony (Bluetooth) with inductive charging cradle, comfort upper bunk, wide, mudguards 3-part, mudguards 3-part with splash guard, fuel tank: 500 liters aluminum, left, fuel tank: additional tank 500 liters aluminum, right, integrated air intake, air filter with extended service life, air compressor 2-cylinder, engine brake reinforced, PremiumComfort mattress upper, wheelbase 4600 mm, frame overhang 1950 mm, tire pressure control system, reversing warning signal acoustic and warning flashing light (warning signal outside), rear cross member reinforced, key with remote control additional (2), interface fleet management system, drawers under the bulkhead, circuit breaker, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver seat sprung comfort seat, seats in the cab: SoloStar Concept, sound system, additional stabilizer, rear axle / tag axle, steel rims 11.75x22.5 (on front axle), storage compartment outside left, socket 12V / 15 A in the passenger footwell additional, socket 24V / 25 A in the passenger footwell, socket cab 24V, steep shoulder rims 11.75x22.5 (on tag axle, reinforced), preparation for 4 surround cameras (display in the on-board monitor), preparation for additional headlights, curtain sleeper cab, warning device seat belts Additional equipment: Emission standard EURO 6, axle configuration: 6x2, front axle load 8.0 t, Actros 5, Actros cab L, approach / front mirrors heated, trailer brake 2 - line, connections left, trailer socket 24V / 15-pin, exhaust to the right outside, equipment package: Powertrain 2, exterior mirror camera MirrorCam, differential lock rear axle, torque increase 12th gear, air connection in the cab, air reservoir steel, air dryer high, air dryer with condensate monitoring, automatic activation for driving lights (light sensor), driver assistance system: Attention-Assist (fatigue detection sensor), driver assistance system: Autonomous emergency braking assistant (Active Brake-Assist 5), driver assistance system: Lane keeping assist, cab: cab entrance fixed, cab: interior package chrome, cab: tilting device hydraulic, cab: L GigaSpace, 2.50 m, floor level, vehicle outline lights LED, suspension: air / air (full air), electric windows, vehicle without rear window, generator 100 A, regulated, speed limiter, urea tank (AdBlue)

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 380 A, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table length: 1,320 mm, table height: 290 mm, throat depth: 180 mm, ram plate length: 500 mm, clearance between the columns: 900 mm, retraction force: 40 t, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,500 kg, controller model: Estun NC E21, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. Hsdpfszlqkusx Aa Eofi The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: used, mileage: 18,380 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, fog lights, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, soot filter, trailer coupling, XZ1 model generation 1, V85 smoker's package, F2W winter package, E7M MBUX multimedia system, H15 seat heating for passenger, H16 seat heating for driver, E07 hill-start assist, LA2 headlight assistant, JG0 gear shift indicator, JA8 crosswind assist, MJ8 ECO start-stop function, XY5 model year 5, H12 auxiliary hot water heater, J65 outside temperature display, C6L multi-function steering wheel, JK5 instrument cluster with color display, MS1 cruise control, JF1 rain sensor, F64 exterior mirrors, electrically foldable, F68 exterior mirrors, heated and electrically adjustable, L13 fog lights with cornering lights, IR4 wheelbase 3665 mm, SA5 airbag driver, SA6 airbag passenger, E1D digital radio (DAB), S23 passenger seat, single seat, AR5 axle ratio i = 4.727, S22 armrest for driver's seat, S02 driver's seat, IF3 chassis with cab, F35 rear window, IL5 left-hand drive, R87 spare wheel, RS3 steel rims 6.5 J x 16, LE1 adaptive brake light, BA3 active brake assist, JB4 active lane keeping assist, JW8 attention assist, EY5 Mercedes-Benz emergency call system, JA7 blind spot assist, IT4 3.5-ton vehicle, GD8 6-speed manual transmission ECO Gear, KP7 exhaust gas purification SCR generation 4, FF5 storage compartment above windshield, FJ4 storage compartment under cockpit, 805 AEJ X4/1, XM4 acoustic package, V3L all-weather floor mats, QA7 trailer coupling, for increased trailer load 3.5t, E43 trailer socket 13-pole, J52 engine oil level display on cold start, LB9 exit lights, IC1 model series C907 / C910 Sprinter, IE0 model series C907 VS30 RWD, H1B operation of tachograph in front below headliner, F3F passenger-optimized gearshift console, XC1 COC documents, incomplete, XO5 digital operating manual, EW6 digital extra: Remote Services Plus, E7B digital extra: pre-equipment for navigation, L72 electrical system for external body, MT5 emission class Euro 5b+ N1, FQ6 lockable compartment in storage compartment above windshield, M72 vehicle HVO capable, Z4W production Ludwigsfelde, M60 generator 14 V / 250 A, XM1 noise reduction measures, M26 speed limitation 150 km/h, J55 seat belt warning system for passenger, J58 seat belt warning system for driver's seat, HH9 semi-automatic climate control system TEMPMATIC, T75 grab handles for entry of driver and passenger, KB7 main tank 93 liters, Y43 hydraulics - jack, F61 interior mirror, Z3K Pro Hedpfx Aaozln Dxj Eofi Note Despite careful checking of all our price listings, errors still occur. Some of these are caused by transmission errors in the systems of the various platform providers. But errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price listing also cannot be declared as part of the contract. If you attach particular importance to a specific feature of our listing, please let us know when the contract is concluded. Thank you for your understanding!

Condition: used, mileage: 75,374 km, power: 90 kW (122.37 HP), first registration: 10/2024, fuel type: diesel, next inspection (TÜV): 10/2026, fuel: diesel, color: grey, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, sliding door, * Please schedule an appointment by phone for a consultation or test drive before your visit. This will help you avoid waiting times, and we can dedicate enough time to assist you. * Service booklet * Non-smoking vehicle TRANSMISSION / CHASSIS * Engine: 2.0 L - 90 kW TDI Hfodpjzlmy Eefx Aa Eoi * Body style: Van * Drive type: Front-wheel drive * Transmission: 7-speed dual-clutch transmission (DSG) APPEARANCE * Tinted windows from the factory * Interior: Matte decorative trim * Special paint: Pure Grey * Black painted exterior mirrors * Alloy wheels * Black painted exterior mirrors, body-colored exterior door handles, silver sliding door rail cover * Roof rails LIGHTS & VISIBILITY * Light and Visibility Package * LED headlights (cornering lights, bad weather lights) * Automatic headlight control (ALS) with "Leaving Home" / "Coming Home" function * Light and rain sensor * Cornering and all-weather lights / bad weather lights * Interior mirror with automatic anti-glare function * Exterior mirrors, electrically adjustable, heated, and foldable * Headlight range adjustment * Heated windshield washer nozzles * Standard rear lights ENTERTAINMENT * Digital Cockpit PRO (digital instrument display) * Digital Cockpit Pro * Audio-navigation system Discover Pro (10" touchscreen) * App-Connect incl. App-Connect Wireless (Apple CarPlay, Android Auto) * Audio system: Ready 2 Discover * Digital radio reception (DAB+) * Comfort mobile phone interface with wireless charging function * Technology Package * 4 front speakers ASSISTANCE SYSTEMS AND SAFETY * Driving assistance system: Adaptive Cruise Control (ACC) * Rear view camera * Keyless Access locking/starting system with Safelock * Driving assistance system: Lane Change Assist (Side Assist) with Parking Assist * Driving assistance system: Turning and swerving support * Driving assistance system: Traffic sign recognition * Driving assistance system: Driver alertness system * Driving assistance system: Park Assist * Anti-theft alarm system * Driving assistance system: Area monitoring system (Front Assist) with city emergency braking function * Driving assistance system: Lane Keeping Assist (Lane Assist) * Speed limiter with predictive speed control * Front camera (multifunction camera on windshield) * Driving assistance system: Multi-Collision Brake * Electric parking brake with Auto-Hold function * Warning system for front seat belts COMFORT * Auxiliary heater with timer and remote control * Winter Package Basic and auxiliary heating * Seat cover / upholstery: Artificial leather * Left front seat ErgoComfort (incl. electrically adjustable lumbar support) * Front seat heating * Standard acoustic package for the cab * Tie-down eyes in the luggage/cargo compartment * Climatronic 2-zone air conditioning system * Lockable and illuminated glove compartment * Storage compartments in the overhead console * Start/Stop system * Sliding door on the right * Cruise control system * Left front seat, electrically adjustable lumbar support * Leather steering wheel with multifunction and shift function OTHER * Low emissions according to Euro 6e emissions standard * Truck registration * Floor covering in the front (rubber) * Floor covering in the passenger/cargo area (wood, coated) * SCR system (AdBlue technology) * Operating voltage 12 V * Emergency call system * Tire pressure monitoring display * and much more * The above information is without guarantee. It does not constitute an agreed-upon specification. Subject to errors and prior

Condition: used, mileage: 194,500 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, first registration: 12/2022, emission class: euro6, color: white, number of seats: 9, Equipment: ABS, air conditioning, navigation system, parking heater, * Our internal number: 1118 * SAMPLE PHOTOS! * MB Sprinter 317 CDI Tourer L2H2 - with LIFT * FIRST OWNER - from the Mercedes Benz fleet + possibly initial registration by Will * Full service history * Service newly done in 05/2025 * MB wheelchair minibus with smart-floor base and wheelchair lift * Passenger compartment air conditioning and driver's seat air conditioning * Tinted glass * Rearview camera * Step at sliding door Assistance systems: Blind spot assist, high beam assist, rear parking aid, parking package, rearview camera, rear parking sensors, speed limiter, cruise control, hill start assist, light sensor, front parking aid, crosswind assist. Lighting: Cornering lights, turning lights, adaptive brake lights, fog lights/functions, turn signal lights integrated into exterior mirrors, daytime running lights, roof beacons, headlight range adjustment. Media & Infotainment: Navigation/online navigation, touchscreen display, radio, MP3-capable audio system, DAB tuner, USB interface/connection, Bluetooth interface, hands-free system, voice control/operation, Bluetooth phone preparation, MBUX multimedia system, integrated music streaming. Safety & Technology: Comfort suspension, electronic brake-force distribution (EBD), electronic stability program (ESP), passenger airbag, driver's airbag, active brake assist, anti-lock braking system (ABS), traction control system (ASR), seatbelt warning system, immobilizer. Comfort & Climate: Electrically folding mirrors, telematics/emergency call system (preparation), onboard computer, exit/entry lights, comfort turn signal, lumbar support, rooftop air conditioning, heated mirrors, electric windows, air conditioning, central locking with remote control, seat heating, 12V socket, darkened window(s), acoustic package, ATA/outside temperature display, center lock switch, tinted glass, tachometer, electric sliding door, rear wing doors with window, comfort driver's seat, center armrest, right sliding door, power steering, auxiliary heater/additional heater. Tires & Rims: All-season tires, tire pressure monitoring. Interior & Design: Multifunction steering wheel, steering wheel controls, adjustable steering wheel. Environment & Charging: EURO VI, particulate filter, start/stop automatic system, environmental badge 4. Transmission: Hedpfewll D Sjx Aa Eofi Manual transmission. Further information: High roof, first ownership, rubber/plastic floor, car registration, wheelchair tie-down, service booklet, accident-free, SALE ONLY TO RESELLERS / with high-roof, wheelchair lift, flat turn indicators, side marker lights, UMTS/LTE communication module, chassis for comfort and cargo protection, reinforced front axle, front axle with increased load capacity, additional thermal insulation, overhead storage compartment above windshield, storage compartment with lid, storage compartment, luggage net on seat backrest, comfort headrest passenger seat, main tank 93 liters * The customer is obliged to independently satisfy themselves of the condition and features of the goods/vehicle! * etc. * Vehicle possibly in use / mileage and condition may vary * All information without guarantee * We reserve the right to prior sale * We refer to our terms and conditions

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Hfjdpfjh Ek H Sox Aa Esi Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity Hedpfx Aaozi S R Rs Eefi • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 Hfsdpfx Ajwwkx Eea Eji • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: used, mileage: 79,890 km, power: 110 kW (149.56 HP), fuel type: gasoline, gearing type: automatic, first registration: 02/2021, next inspection (TÜV): 01/2028, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, immobilizer system, navigation system, LPG GAS SYSTEM!! TOW HITCH/ 19-inch Alloy Wheels!! PARKING HEATER! 1 OWNER App-Connect, Metallic Paint, Rear and Rear Side Window Tinting Hjdpfx Ajzc Srioa Eefi 3-point rear center safety belt, Storage compartment in the headliner, Airbag driver/passenger side, Passenger airbag deactivatable, Knee airbag driver side, Washer fluid level indicator, Audio system Composition (USB, Bluetooth, Touchscreen color display), Automatic headlight control (ALS) with Leaving Home/Coming Home function, Exterior mirror, aspherical, left, Exterior mirror, elect. adjustable and heated, Exterior mirror, convex, right, Exterior mirror, body color, Bluetooth interface for mobile phone, Roof rails, Dual-tone horn, Parking assist front and rear, Electronic Stability Program (ESP) with brake assist, ASR/ABS, EDS, Trailer stabilization, MSR, Driver Assistance System: Automatic Distance Control (ACC incl. Stop & Go function), Driver Assistance System: High beam assistant (Light Assist), Driver Assistance System: Pedestrian recognition, Driver Assistance System: Multi-Collision Brake, Driver Assistance System: Driver fatigue detection, Driver Assistance System: Lane assist, Driver Assistance System: Area monitoring system (Front Assist) with City Emergency Braking function, Power windows, front and rear, Window trim, black, Windshield laminated glass, tinted (acoustic glass), Floor mats, Textile, Footwell lighting, front, / Roller blind, Luggage compartment lighting, Rear window wiper, Interior: Decorative trim center console Piano Black / glossy black, Interior: Decorative trim Weave, Interior filter: Activated combined filter, Interior mirror with automatic anti-glare function, Proactive occupant protection system, Isofix mounts for child seat on rear seats (including i-Size child seats), Body: 5-door, License plate light, LED, Folding tables integrated in the front and passenger seat backrest, Climatronic air conditioning system with 3 zones, including rear control, Rear headrests (3-way), Loudspeakers (8), Lumbar support, front, Steering column (steering wheel) mechanically adjustable, Height/longitudinal adjustment, Reading lights, front and rear, LED, Light alloy wheels, Mobile Online Services Preparation We Connect and We Connect Plus, Model refinement, Engine 1.5 Ltr. - 110 kW 16V TSI ACT, Multifunction display Premium (color display), Multimedia interface 2 x USB (Type C) front, Fog light, Non-smoker package, Emergency call system, Gasoline particulate filter (OPF), Parking brake, electric with auto-hold function, Radio reception digital (DAB+), Wheelbase 2678 mm, Tire pressure monitoring display, Rear seat split / foldable, sliding, center armrest and through-loading function, Low emissions according to exhaust standard Euro 6d, Gear/selector lever knob, leather, Headlights, LED, Drawer / storage compartment under front seats, Side airbag, front with head airbag unit, Power steering, electromechanical and speed-dependent, Seat belts, rear, outer with belt tightener, Seat belts, front with belt tightener, height adjustable, Seat cover / upholstery: Fabric Shooting Star, Front seats, height adjustable, Seats: Comfort seats, front, Front right seat backrest foldable, Sun visors with mirror (illuminated), Start/Stop system with recuperation, 12V socket in the trunk/loading area, Bumper, basic, Door handles, exterior, body color, First aid kit and warning triangle, Warning system for seat belts, front and rear , Rear and rear side window tinting, Interior mirror, automatic anti-

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Hedpfjn Nv Tisx Aa Eofi Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: used, mileage: 114,000 km, power: 105 kW (142.76 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,267 mm, total width: 2,020 mm, total height: 2,356 mm, loading space length: 2,760 mm, loading space height: 1,690 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Well-maintained Mercedes-Benz Transporter Sprinter III (W907) - 314 - Automatic Panel Van L1H1, featuring an excellent specification; ideal for tradespeople and commercial use. Workshop/shelving installation by Bott (details below) Automatic transmission GTronic (9-speed), steering wheel-mounted paddle shifters for manual gear selection LED High Performance headlights Partial LED rear lights Alarm system Heated windscreen Air conditioning with pollen filter Auxiliary electric (air) heater Driver’s seat heating (controls in door panel) Comfort suspension driver’s seat with folding armrest, multi-adjustable: - Driver’s weight, seat height, seat inclination, backrest - Electrically adjustable lumbar support Single adjustable passenger seat: backrest adjustable Durable seat covers Leather multifunction steering wheel, adjustable Driver assistance systems: - Park Assist Package - PDC Park Pilot front and rear with optical and audible indicators - Reversing camera - Adaptive cruise control with speed limiter - Active distance assist Distronic - Active brake assist - Traffic sign recognition - Active lane keeping assist - Blind spot assist - Drowsiness detection - Hill-start assist - Crosswind assist - ABS, ASR, ESP - Automatic headlight control - Automatic wiper control - Service interval display (Assyst) MBUX infotainment system with 7'' touchscreen Hfedpfx Aaezcuvds Eei - Navigation with TMC - AppConnect (Android Auto & Apple CarPlay) - Radio DAB/FM/AM - Media USB-C, music streaming via Bluetooth - Bluetooth interface and hands-free system - Mercedes-Benz emergency call system - Voice control for radio, navigation, and telephone On-board computer / trip computer Multifunction color display Comfort: - Electric windows (both sides) - Electrically adjustable and heated exterior mirrors (both sides) - Central locking with remote control (3-button) - Keyless start system - Acoustic package (sound insulation) - External noise reduction measures Fog lights with cornering function - Driver and passenger front airbags - Windowbag (head airbag system) - Thorax-pelvis (side) airbag for driver Wheelbase: 3259 mm Rear hinged doors, opening angle 270 degrees Bulkhead without window Overhead storage shelves Heat-insulating glazing Cargo area setup: Bott workshop installation (comparable to Aluca, Sortimo, Würth). Left side: Shelf module with compartment, storage box, 4 drawers, and 2 tool/parts cases. Right side: Shelf module with compartment, storage box, and 3 drawers. Front bulkhead: Shelf module with shelving, storage box, and 4 tool/parts cases. Bulkhead partition. Heavy-duty wooden floor. Special lashing rails and tie-down rings for load security. Interior lighting. Ventilation (in/out). 3 x 12V power sockets. Grab handle at partition wall. Cargo area dimensions (all approx.): Load length at floor: 276 cm Load length mid/upper (due to bulkhead angle): 254 cm Load height (measured under crossbar): 169 cm Service history: 10/2022 at 36,699 km: Inspection with oil change 11/2024 at 75,884 km: Inspection with oil, air filter, and fuel filter change Next inspection due soon Fitted tires: Summer tires 225/65 R16 on steel rims, approx. 4 mm tread front and 5 mm rear Additional tires: Winter tires 225/65 R16 on steel rims with approx. 3 mm tread on all four wheels Despite careful processing, errors in the vehicle description and images may occur. Subject to prior sale and corrections.

Condition: used, mileage: 127,000 km, power: 105 kW (142.76 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,267 mm, total width: 2,020 mm, total height: 2,356 mm, loading space length: 2,760 mm, loading space height: 1,690 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Beautiful and well-maintained Mercedes-Benz Sprinter III (W907) 314 automatic panel van L1H1, with excellent features, ideal for trades and businesses. Workshop/shelving system by Bott (details below). Transmission: Automatic GTronic (9-speed), shift paddles on the steering wheel for manual operation. LED headlights, high performance. Rear lights, partially LED. Alarm system. Heated windshield. Air conditioning with pollen filter. Auxiliary heating (air), electric. Heated driver's seat (switch in the door panel). Driver's seat, comfort suspension seat with fold-out armrest, adjustable: - Driver's weight, seat height, seat tilt, backrest, seat cushion. - Lumbar support (electric). Adjustable passenger seat: backrest. Hfodpfezcuu Hsx Aa Eji Durable seat covers. Leather multifunction steering wheel, adjustable. Driver assistance systems: - Parking Assist package. - PDC ParkPilot front, rear, and side, visual and acoustic display. - Rear view camera. - Cruise control, adaptive and with speed limiter. - Distance Assistant Distronic, active. - Brake Assist, active. - Traffic sign recognition. - Lane Keeping Assist, active. - Blind Spot Assist. - Driver fatigue detection. - Hill-start assist. - Crosswind assist. - ABS, ASR, ESP. - Automatic headlight control. - Automatic windshield wiper control. - Service interval indicator Assyst. Infotainment system MBUX with 7'' touchscreen: - Navigation with TMC. - AppConnect with Android Auto and Apple CarPlay. - Radio DAB/FM/AM. - Media: USB-C, music streaming via Bluetooth. - Mobile phone interface Bluetooth and hands-free system. - Communication module (LTE) for digital services. - Mercedes-Benz emergency call system. - Voice control for radio, navigation, and telephone. Trip computer/journey computer. Multi-function display, color. Comfort: - Electric windows (both sides). - Electrically adjustable, heated and foldable exterior mirrors (both sides). - Central locking with remote control, 3 buttons. - Keyless start system. - Acoustic package (noise insulation). - Noise reduction measures on the exterior. - Fog lights with cornering light. Airbags: - Front airbags, driver and passenger side. - Head airbag system (windowbag), both sides. - Shoulder-pelvis airbag (thorax-pelvis sidebag), driver side. Wheelbase 3259 mm. Rear wing doors, 270-degree opening angle. Sliding door, right side. Storage compartments in the headliner. Heat-insulating glazing. Only 1 vehicle key available. Cargo area: Bott workshop installation (similar to Aluca, Sortimo, Würth). Left side: Shelving with storage compartment, storage box, 4 drawers, and 2 tool/parts cases. Right side: Shelving with storage compartment, storage box, and 3 drawers. Front: Shelving with shelf compartment, storage box, and 4 tool/parts cases. Cargo area partition. Robust wooden floor. Lashing rails and eyelets for securing cargo. LED interior lighting. 3 x 12V sockets. Grab handle on the partition. Cargo area dimensions (approximate): Cargo area length, bottom: 276 cm. Cargo area length, middle/top: 254 cm (due to the angle of the partition). Cargo area height: 169 cm (measured under the crossbar). Service history: 03/2023 / 50,657 km: Inspection with oil change. 01/2025 / 93,442 km: Inspection with oil change + air filter + fuel filter. 07/2026 / 126,990 km: New battery installed. Next service: 01/2027 or 153,442 km. Tires fitted: Winter tires 225/65 R 16 on steel rims, approximately 5 mm tread depth at the front and approximately 8 mm at the rear. Additional tires:

Condition: excellent (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Main features Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication Hfjdpfjzlixqjx Aa Esi JBUS/MODBUS connection for BMS integration Lockable metal enclosure The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: new, Year of construction: 2011, functionality: fully functional, Xtralis VESDA VLF-250 very early warning aspirating smoke detector, supplied together with an Apollo XP95 three-channel input/output module in a separate enclosure. The VESDA VLF-250 continuously draws air through a connected sampling pipe network and analyses it using laser-based smoke detection. It is designed for early fire detection in small, business-critical areas of up to 250 m², including server rooms, data centres, control rooms, electrical switch rooms, telecommunications facilities and air-handling installations. The included Apollo XP95 three-channel input/output unit provides independent monitoring of three input channels and independent control of three relay outputs. It is suitable for integration with compatible Apollo XP95 and Discovery fire alarm systems. Xtralis VESDA detector Manufacturer: Xtralis Product range: VESDA LaserFocus Model: VLF-250-00 Equipment type: Aspirating smoke detector Coverage area: up to 250 m² Supply voltage: 18–30 V DC Nominal voltage: 24 V DC Current consumption: approximately 220 mA nominal Current in alarm: approximately 295 mA Sensitivity range: 0.001–0.969 dB/m Maximum sampling pipe arrangement: 1 × 25 m pipe, or 2 × 15 m branches Maximum number of sampling holes: 12 Protection rating: IP30 Approximate dimensions: 256 × 183 × 92 mm Approximate weight: 2 kg Serial number: 88013225 Manufactured: January 2011 Made in: Malaysia The VLF-250 includes programmable alarm thresholds, ultrasonic airflow sensing, AutoLearn Smoke, AutoLearn Flow, an event log and an integral status display. Apollo input/output module Manufacturer: Apollo Fire Detectors Series: XP95 Hodpfszliwgsx Aa Ejfi Model: XP95 3 Channel Input/Output Unit Number of input channels: 3 Number of relay output channels: 3 Supply voltage: 17–28 V DC Relay contact rating: 1 A at 30 V AC Operating temperature: –20°C to +70°C Protection rating: IP54 Compatible with: Apollo XP95 and Discovery systems Made in: United Kingdom Separate enclosure included Apollo identifies part number 55000-588 as an obsolete legacy product, making this unit particularly suitable as a replacement or spare for existing XP95 installations. Condition- Used.

Year of construction: 2018, condition: excellent (used), Type: Low Voltage Distribution Board / MCCB Panel Installed equipment 1 × Schneider Electric Compact NSX400NA main incomer Main incomer rating: 400 A 3-pole configuration Ui: 800 V Uimp: 8 kV 4 × Schneider Electric Compact NSX160F outgoing MCCBs 4 × Schneider TM125D thermal-magnetic trip units Hjdozlii Njpfx Aa Esfi Outgoing MCCB rating: 125 A each Breaking capacity: approximately 36 kA at 415 V 1 × additional Schneider / Merlin Gerin outgoing device rated 125 A 1 × additional Schneider / Merlin Gerin outgoing device rated 63 A Three-phase L1/L2/L3 distribution Internal busbar system Labelled outgoing circuits Spare internal capacity / blanked positions Heavy-duty floor-standing steel enclosure Lockable double front doors The board appears complete and is in good visual condition. Operational testing and final electrical inspection should be carried out by the purchaser before installation. Available for inspection. Additional photographs and technical information can be provided.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, BAZ and extrusion die system for manufacturing car sill components, consisting of: *Machining equipment: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2 coolant treatment units *Assembly of subassemblies (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for Robot 1 - Marking station Hfjdszi Efuopfx Aa Eei - Robot 2 KUKA KR120 R3500 - Gripper for Robot 2 - Interface between robot and machining center - Cleaning unit for components - Assembly machine with 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for Robot 5 - Pallet station - Safety enclosure - Electrical control and integration Further information available upon request.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 168 mm, travel distance Z-axis: 515 mm, overall weight: 11,000 kg, controller manufacturer: FANUC, number of axes: 3, This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021, offering advanced horizontal turning capabilities. Ideal for complex and precise metalworking tasks, this machine ensures efficient production with its robust design and modern technology. If you are looking to get high-quality turning capabilities, consider the CMZ TTL-66-66-TTY-T2Y machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits - Voltage: 400 V AC- Phases: 3 + N + PE- Frequency: 50 Hz- Maximum Power: 90 kVA- Maximum Current: 125 A- Pneumatic Pressure: 6 bar- Machine Language: German- Control System: Fanuc (G Codes Type A)- Left Spindle Equipment: LPS system, Axial stop, Coolant supply through spindle, Collet chuck Hainbuch AXFIX 65 (standard) 2703/0008- Right Spindle Equipment: LPS system, Coolant supply through spindle, Tailstock long version for live center CM 3, Collet chuck Hainbuch AXFIX 65 (standard) 2703/0008- Tool Preset Device: Tool presetter included- Chip Disposal: Rear chip conveyor with double chain- Upper Tool Turret (T1): High-pressure coolant pump with 3 programmable stages (35, 15 & 6 bar), including 75µm filter- Lower Tool Turret (T2): High-pressure coolant pump with 3 programmable stages (35, 15 & 6 bar), including 75µm filter- Coolant Features: Coolant nozzles above spindles, Coolant washing nozzle, Tank level monitoring- Monitoring Systems: Tool life management, Tool load monitoring- Extraction System: Connection flange Ø150, Extraction unit LTA E120-X1-H with installation parts, hoses and support- Automation / Gantry Loader: GL20-11 3-axis CNC Gantry Loader (travel path to both sides), Servo-controlled 2x180° double swivel gripper for shaft parts GLII, Special gantry enclosure- Workpiece Handling: Workpiece carrier WS-700-3000 on front left side, WS-700 with 3 rows of V-guides (2 shafts per row), CMZ workpiece carrier for round and square material (V-support 90° version), Connection interface for customer unloading belt- Tooling Holders Provided: 8x Double radial holders for tools 20x20 (310.04.092046), 6x Holders for boring tools Ø32 H75 (310.04.092060), 2x TTL/10400/02 Axial holders for driven tools ER32 with internal coolant 70bar (12000rpm), 2x TTL/10400/09 Radial holders for driven tools with internal coolant 70bar ER16 (Max 12000rpm)- Gripper Jaws Included: Raw material jaws (32mm/30-35mm, 35mm/35-40mm, Square 30mm/30x30mm), Finished part jaws (32mm/30-35mm, 38-40mm/35-40mm, Square 30mm/30x30mm)- rotating viewing window / machine status light- Cmz requires a signal indicating that a part can be placed / output signal indicating that the conveyor can move freely Hsdpfx Aox D Ei Asa Eefi Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Two like-new soundproof enclosures, each designed to house four Busch pumps from Koch Technik, are for sale. Price per unit: €950 If both enclosures are purchased, the total price is €600. The original invoice from Koch is attached below in the documents. Hfedpfx Aasy Tt Dpo Eji

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Hodpfx Aaozi Da Ro Esfi Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, mileage: 28 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, first registration: 06/2025, emission class: euro6, color: red, number of seats: 4, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * Armrests for both seats in the driver's cab * Exterior mirrors, electrically adjustable and heated Hfodpfx Aaex S Tw He Eji * Swivel seat on the right in the first row (not height-adjustable) * Height adjustment for left single seat in the driver's cab * Lumbar support for left and right single seats in the first row (both manually adjustable) * Multifunction leather steering wheel (3-spoke) * "Premium" multifunction display with multi-color screen and fatigue detection * Heated seats for seats in the driver's cab, left and right, individually adjustable * Auxiliary heater for driver's cab and cargo compartment with remote control and fuel-powered additional heater * Central locking with remote control and interior operation * 2 USB interfaces (Type C) in the dashboard * 4 speakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * "Premium" multifunction display with color screen * Mobile phone interface * Navigation system "Discover Media" with 20.3 cm (8 inch) color touch display including "Streaming and Internet" * Voice control * Wired & Wireless App-Connect * Adaptive Cruise Control (ACC) up to 210 km/h and Front Assist environment monitoring system with City Emergency Braking * Adaptive Cruise Control (ACC) with speed limiter * Airbags for driver and front passenger, with front passenger airbag deactivation * Hill Start Assist * Electronic Stability Program, ABS, ASR (with deactivation button), EDS, Hill Start Assist, and Brake Assist * Rear window with heat-insulating glazing, heated, and rear window wiper/washer system * LED main headlights with LED daytime running lights and LED tail lights * Fatigue detection * Emergency call system eCall * ParkPilot front and rear * Reversing camera "Rear View" (static lines) * Intermittent windscreen wipers with rain sensor for front windscreen * Electromechanical power steering, speed-dependent, steering column height and reach adjustable * Crosswind Assist * Start-stop system with brake energy recuperation * Safety interior mirror, automatically dimming * Front Assist environment monitoring system with City Emergency Braking (for ACC) * Electronic immobiliser * 1 12-volt socket in dashboard * 16" chassis with 16" brake system * 2 remote folding keys * 2-seater bench seat on left, backrest foldable with armrest on aisle side, in second row * 4th engine 2.0L unit 04L.Y * 6-speed manual transmission * Covers for alloy wheels (hub cap) * Emission standard Euro 6d ISC-FCM * Acoustic package * Fixed tow bar (including trailer stabilization) * Base vehicle for body manufacturers * Battery 420 A (70 Ah) * Camper preparation * 3-point automatic safety belts, height-adjustable on outer seats in driver's cab, with electric belt tensioners * Electric terminal strip and function control unit 1 with ABH programming * Exterior package * Driver's cab seat package for body manufacturers * Reinforced rear suspension * Fortana Red Metallic * Tailgate with window cut-out * Interior lighting in load/passenger compartment * Child safety lock, electrically operated * Child seat anchorage ISOFIX and Top Tether for Transporter/Caravelle in second row * Air conditioning with manual control in driver's cab, with additional heater for load/passenger compartment * Kombi * Fuel tank with 70-liter capacity * Short wheelbase * LED main headlights with LED daytime running lights * Automatic headlight range adjustment

Condition: used, Caroussel-type labelling machine for applying paper labels to glass bottles using cold glue. Additional title: cold glue labelling for glass bottles; years of manufacture: 1996–2023 Capacity: 55000 bo/h Formats: 0.5 l NRW bottles Material: housing from stainless steel Position: in a floor-standing cabinet on legs Hfjdpfozi Al Eex Aa Esi Base construction: caroussel-type machine Features: Protective enclosures with doors; label magazines; glue pumps; date coding (vector laser) with its own control panel featuring a touchscreen; control cabinet with touchscreens

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber Hfedsyyw E Rspfx Aa Eei - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Phase: single-phase Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Hsdpfxszizr Re Aa Ejfi Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: good (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, 5-axis machining center DMG MORI CMX 50 U including robot Year of manufacture: 2017 Control unit: Siemens Operate Technical Data Travel paths: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110° C-axis: 360° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Drive power – main spindle (100/40% duty cycle): 13 / 9 kW Worktable: Table size: Ø 630 x 500 mm Tool changer: Number of tool stations: 30 positions Feeds: Rapid traverse (x/y/z): 30 m/min Operating hours: Spindle hours: Technical features & accessories: - Direct absolute measuring system in x, y, and z, including air purge - Blowing air switching via M-function - Production package, consisting of: • Internal coolant supply 12 bar • Chip conveyor, tank 250 L • Enclosure roof • Tool changer door can be opened • Signal lamp Hedpfxjy Ry N Te Aa Esfi • Touch probe PP40 • Tool measurement TS27R • Tool breakage monitoring Robot ROBOJOB Type: Mill-Assist-E Year of manufacture: 2018 Spindle bearings replaced in autumn 2025.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber Hjdpfxsziznfj Aa Eofi - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.