Used Abrasive Belts for sale (9,715)

Condition: used, Belt conveyor: Total length: 25.4 m Dismantled into 2 sections: Section 1: 12,9 m Section 2: 12,5 m Manufacturer / model: ABB M2AA 112M electric motor Power: 4.0 kW Speed: ~1435 rpm (50 Hz) Ljdpez An Ncsfx Abzsag Gearbox: V. Kumpulainen THV-212 (Finland)

Condition: good (used), Year of construction: 1985, For sale is a used Langzauner LZK 3/2 wide belt grinding machine with a grinding belt length of 6200 mm. The machine is in good condition and has been inspected by our qualified technicians. Technical data: - Table size 2500 x 800 mm - Height adjustable - Grinding belt length 6800 mm - Dust extraction connection Ø 150 mm - Motor power 3 kW / 4.1 hp - Year of manufacture 1985 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Grinding machine, wide belt, wide belt sander Lasdez Anwmopfx Abzeg Reference: R-N0131

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Laedpfjzr Iwfex Abzsg Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg Lodpfx Aszruu Debzsag – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of units 15kW -from below: 2 rubber rollers, slip rollers conveyor belt 2 rubber rollers, slip rollers grinding thickness potentiometer belt blowing system pneumatic belt oscillation controlled by photoelectric sensors electric table lifting + manual (for precise adjustment) 2 feed speed types 0.3kW with pneumatic brake working pressure 6-8bar diameter of dust extraction nozzle 2x140mm overall dimensions L/W/H 1840x1650x2000mm weight 1160kg Laedpfx Aszrnwlsbzsg – unpainted – made in Italy – automatic shoe – 2 units – grinding thickness potentiometer – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11640 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8021 TECHNICAL DATA - max. width of the workpiece: 1100 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating 2) grooved rubber roller - motor power: 11 kW - brake - from above: - split, sliding metal roller - pressure roller - unit - pressure roller - unit - pressure roller - cleaning brush - from below: - 2 sliding metal rollers - conveyor belt - 2 sliding metal rollers (outlet) - new conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - feed motor: 1.5 kW - grinding thickness potentiometer - working pressure: 8-10 bar - dust extraction nozzle diameter: 3x165 mm, 1x140 mm - overall dimensions (L/W/H): 1870x1850x2210 mm - weight: 2165 kg ADVANTAGES - Made in Italy, SCM brand - New conveyor belt - 2 units - Grinding thickness potentiometer - Unpainted Lasdpfx Ajztaqaebzsg - Used sanding machine, very good condition Net price: 26900 PLN Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine Ljdoztap Aepfx Abzoag – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7840 TECHNICAL DATA - Max. workpiece width: 630mm - Max. workpiece height: 110mm - 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration + pad + metal roller - Top section: - Metal infeed roller, slip type - Unit - Metal slip roller - Unit - Metal slip roller - Bottom section: - 2 metal slip rollers - Feed belt - 2 metal slip rollers - Pneumatic oscillation of belts - 2 feed speeds - Motor: 2×7.5kW - Electric table lift - Operating pressure: 6-8 bar - Extraction port diameter: 2x160mm - Overall dimensions (LxWxH): 1650x1060x1970mm - Weight: 972kg ADVANTAGES – Polish-made – 2 processing units – Not repainted Ledpfx Abozr I Anszjag – Very good condition – Used sander Net price: 20,900 PLN Net price: 4,980 EUR (calculated at 4.2 EUR) (Prices may change with larger exchange rate fluctuations)

Condition: ready for operation (used), * Brand: Henkel Lsdpfjzpzktsx Abzjag * On stock: 5 pieces. * 2x: A-A length = 20000 mm. * Beltwidth: 650 mm. * Driving: 7,5 kW gearbox. * 1x: A-A length = 25000 mm. * Beltwidth: 650 mm. * Driving: 7,5 kW gearbox. * 1x: A-A length = 22000 mm. * Beltwidth: 800 mm. * Driving: 11 kW gearbox. * 1x: A-A length = 7500 mm. * Beltwidth: 800 mm. * Driving: 4 kW gearbox.

Condition: good (used), For sale: a 6-meter conveyor belt, ready for operation. ✅ Length: 6m ✅ Belt width: 0.4m ✅ Transportation can be arranged ✅ Large selection of conveyor belts available on site Lodpez Andtjfx Abzeag Please contact us. We will help you choose the right conveyor belt to meet your needs.

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Laodpfxsy Naq Us Abzog Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: excellent (used), M.A.S.S. NP1 CONVEYOR BELT For sale is a used conveyor belt from the Italian company M.A.S.S. s.n.c., model NP1. The conveyor has adjustable support height and a conveyor belt with a width of approximately 24 cm. The structure is equipped with wheels to facilitate the movement of the device. TECHNICAL DATA: - manufacturer: M.A.S.S. s.n.c. – Italy - model: NP1 - type: NASTRO TRASPORTATORE (conveyor belt) - length: approximately 150 cm - belt width: approximately 24 cm - motor: 0.55 kW - power supply: 380 V - motor: 3-phase - frequency: 50 Hz - motor speed: 1385 rpm - motor protection class: IP54 - adjustable height / support setting - transport wheels Used condition, with normal signs of use, scratches on the paint coating, and surface corrosion on steel components in places. The belt also shows signs of use. Condition and completeness are visible in the photos. Lasdsz Alw Djpfx Abzsg The conveyor can be used for the transport of various materials in production plants, sorting facilities, warehouses, farms, and for other industrial applications. The device can be inspected before purchase. Sold exactly in the condition and configuration shown in the photos.

Condition: excellent (used), BELT CONVEYOR For sale is a used belt conveyor with a length of approximately 300 cm and a belt width of 90 cm. The conveyor is equipped with a steel supporting structure and an electric belt drive. The belt has transverse scrapers to facilitate material transport during operation at an angle. PARAMETERS: Laedpfx Abjz Alwwozog - type: belt conveyor - length: approximately 300 cm - belt width: approximately 90 cm - drive: electric motor - structure: steel - belt: with transverse scrapers - adjustable inclination angle - condition: used The conveyor shows normal signs of wear and tear – there are scratches, paint chipping, and surface corrosion on some of the steel components. The visual condition is shown in the attached photos. The device is designed for transporting various types of materials and can be used, among other applications, in industry, farms, sorting facilities, production plants, and for the transport of bulk materials. It is sold exactly in the condition and configuration shown in the photos. The device can be inspected before purchase.

Condition: used, Conveyor belt with discharge Conveyor belt with pusher to the left Belt length 6200 mm plus 200 mm infeed rollers Belt width 335 mm Working height 980 mm Belt drive SEW 0.55 kW / 243 rpm Infeed rollers SEW 0.55 kW / 329 rpm Conveyor belt with discharge Reinhardt ATS Conveyor belt with ejection Conveyor belt with left push Belt length 6200 mm plus 200 mm feed rollers Belt width 335 mm Working height 980 mm Belt drive SEW 0.55 kW / 243 rpm Feed rollers SEW 0.55 kW / 329 rpm Price: 1. In its current condition, without working electrical controls: 2,700 EUR Optional: Working electrical control + 1,400 EUR Lajdjzhif Aopfx Abzog

Condition: as good as new (ex-display), Year of construction: 2017, Conveyor belt / belt conveyor Belt width: approx. 300 mm Center distance: approx.3,130 mm Drive: 0.75 kW Lodpfxof Rlgko Abzsag As good as new - only in use for a very short time

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 360192021, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 5,600 kg, grinding height: 120 mm, power: 29.66 kW (40.33 HP), height adjustment type: electric, type of input current: DC, grinding belt length: 2,620 mm, workpiece height (max.): 120 mm, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, Roller, shoe, cleaning brush, dust removal, vacuum table. Table height is fixed. Two sanding belts. Ljdpfx Asz Akpljbzoag

Condition: used, Year of construction: 1992, Used Machine Year of manufacture: 1992 Features and technical specifications: - Designed for small workshops, with 1 Combi unit that sands from above - Working width: 950 mm - Sanding belt dimensions: 970 mm wide, 1,700 mm long - 1 combined contact roller/sanding shoe unit, drive motor 7.5 kW, with contact roller (85 Shore) and sanding shoe with felt pad and sliding surface - DFL veneer sanding device - Protected sanding shoe storage compartment inside the machine - Sanding belt drive with automatic star-delta start-up and maintenance-free, wear-free electric braking system - Additional storage compartment for an extra sanding tongue - Safety shut-off when the door is opened - Pneumatic sanding belt tensioning device - Belt feed mechanism, driven by a worm gear motor, feed speeds of 4 and 8 m/min, and automatic control for belt travel - LED digital display for workpiece thickness adjustment - Safety shut-off at the machine inlet in case of excessive workpiece thickness - Indicator lights to show operational readiness - Optimally positioned dust extraction hood with connection (D=160 mm) for the sanding belt - Roller table at the infeed - Complete pneumatic control system, including automatic pressure switch, control and monitoring devices - All electrical switching elements—main switch, fuses, contactor control with motor protection relays, and display devices—in VDE-compliant design - Total connected load: approx. 9 kW - Operating voltage: 380 V, 50 Hz - Dimensions: approx. 1500 x 1650 x 2000 mm Laedpfx Abozy Dzcszsg - Weight: approx. 1200 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 1,962 mm, total height: 1,992 mm, total length: 1,450 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,150 kg, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 1,120 mm, table length: 1,962 mm, table width: 1,100 mm, power of feed motor: 750 W, air demand: 3,620 m³/h, input voltage: 400 V, operating pressure: 8 bar, > Digital grit adjustment and sanding pad control directly on the control panel Lasdpfxjzm Nifs Abzjg > Sanding width 1100 mm > Contact roller and sanding pad unit > Scotch-Brite brushes at the machine outlet > Two-sided roller table extension, 200 mm > Clearance height can be adjusted to an accuracy of 0.1 mm on the control panel > Stepless feed rate, 0.1-10 m/min

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2MAZL000283, power of the servo motor: 350 W, input voltage: 230 V, clearance between the columns: 70 mm, type of input current: AC, throat depth: 120 mm, feed length X-axis: 22 mm, feed length Y-axis: 78 mm, feed length Z-axis: 10 mm, pneumatic connection: 6 bar, JUKI MOL-254 – Automatic Belt Loop Attaching Machine High-Speed Denim Production Unit – Video Verified (03/2026) Description For sale is a JUKI MOL-254 automatic belt loop attaching machine, designed for fully automated production of belt loops in jeans, trousers and workwear. This is a specialized high-speed production unit, not a standard sewing machine. The machine automatically feeds, cuts, positions and bartacks belt loops with consistent precision and strength. The unit has been used in a professional garment production environment and is offered as a complete industrial workstation. Video recorded in operation on 05.03.2026 Serviced on 27.02.2026 Production-ready condition Production performance Cycle time approx. 1.2 seconds per loop Up to 2,000–2,500 belt loops per shift Simultaneous top and bottom bartacking Consistent symmetry and reinforcement quality Key features Fully automatic belt loop feeding, cutting and attaching Integrated bartack stitching system Pneumatic material handling system Digital JUKI control panel Adjustable loop size settings Stable performance on heavy fabrics such as denim and workwear Designed for continuous industrial use Includes JUKI MOL-254 machine unit Integrated motor and drive system Pneumatic system Industrial table and stand Operator control panel Thread stand Technical details Laedpfxsy Nd Hge Abzsg Manufacturer: JUKI, Japan Model: MOL-254 Type: Automatic belt loop attaching machine Control: Electronic JUKI control system Drive: Industrial motor with pneumatic system Application: Belt loop production Condition Used industrial production condition Fully functional Serviced 27.02.2026 Video proof available Typical signs of use from factory environment Sold as-is, where-is, without warranty Applications Jeans manufacturing Workwear production Trousers production Automated garment production lines Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2001, We are selling a used vertical conveyor belt, model RAU-BAND. Lajdez Ag T Tjpfx Abzeg The condition is visible in the photos.

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and Technical Specifications: Laedpfxozyy Dms Abzsg - Combination sanding unit with rubber contact roller and sanding shoe - Sanding width: 1100 mm - Max. workpiece thickness: 150 mm - Min. workpiece thickness: 3 mm - Sanding belt length: 1900 mm - Sanding belt width: 1130 mm - Roller diameter: 180 mm - Sanding shoe width: 60 mm - Feed rate: 5–18 m/min - Compressed air: 6 bar - Motor: approx. 9 kW - Dimensions (W x H x L): approx. 1600 x 2315 x 2150 mm - Weight: approx. 1880 kg

Condition: used, Year of construction: 1973, machine/vehicle number: 6938, input voltage: 380 V, input frequency: 50 Hz, grinding belt length: 7,100 mm, We are offering this used Schmid KM wide belt grinding machine, manufactured in 1973, for sale. Type: KM Machine number: 6938 Year of manufacture: 1973 Operating voltage: 380 V Frequency: 50 Hz Lajdsz Afbiopfx Abzjg Grinding belt length: 7,100 mm We are offering the machine for a net price of 1,600 euros. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2012, operating hours: 5,000 h, condition: used, functionality: fully functional, The Italforni TSC Tunnel Electric Stone Deck Conveyor Oven (31") is a premium, high-output commercial pizza oven that bridges the gap between traditional stone baking and automated conveyor convenience. It features a unique refractory ceramic stone conveyor belt that allows operators to cook genuine Italian-style stone-baked pizzas, flatbreads, and focaccia directly on the stone surface at high volumes. Key Specifications: According to technical data from Italforni and official suppliers like External Dimensions: 1100 mm (H) x 2520 mm (L) x 1200 mm (W) Ledez Ad S Hspfx Abzjag Internal Chamber Dimensions: 2500mm (L) x 870mm (W) x 110mm (H) Belt Width: 31 inches / 790 mm Weight: 420 kg Power Requirements: 34 kW, 415 V three-phase (requires a 63-amp feed) Hourly Production Output The 31-inch variable speed belt handles large quantities efficiently, achieving a standard bake time of roughly 3 minutes per pizza: Core Features: Static Heating Elements: Uses individually controlled top and bottom static Incoloy heating elements. This design provides up to 30% more cooking capacity compared to standard convection models. Precise Digital Controls: Features touchscreen menu programming with an accuracy of +/-1°C. Maximum cooking temperatures reach up to 450°C to 500°C. Energy Efficiency: Includes a built-in standby mode that lowers energy consumption by up to 50% during off-peak hours. Simplified Maintenance: Built with premium stainless steel, a self-diagnostic service function, and removable crumb-collecting trays for easy cleanup.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibrating and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior design companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm Contact roller can be pneumatically adjusted, low wear due to ribbed steel roller Grain size compensation Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed speed can be steplessly adjusted via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the discharge end Constant working height of 900 mm by adjusting the upper part of the machine, thus can also be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Ledpszqvmrjfx Abzjag Maximum sanding width approx. 1340 mm Workpiece height approx. 3 to 150 mm Common sanding belt dimension: 1360 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable discharge table Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar setting points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibrating roller. CE marking Operating manual Without the illustrated connection cable Original paint, only retouched in some areas Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Condition: good (used), For sale: a 6-meter conveyor belt, ready for operation. ✅ Length: 6m ✅ Belt width: 0.6 m ✅ Transport can be arranged ✅ A wide selection of conveyor belts is available on site. Please contact us. We will help you choose the right conveyor belt for your needs. Lajdez Aby Ijpfx Abzjg