Used 4 Colour Press for sale (67,321)

Year of construction: 2022, condition: as good as new (ex-display), New 4 kW screwcompressor FirstAir Type: FAS4 Year of construction: 2022 technical spezifications: operating pressures of the system: 10 bar(ue) at 10 bar : 470 l/min Installed power: 4 kW speed drive motor: 2900 1/min SProtection class / Insulation class Drive motor: IP55 / F Operating voltage / frequency: 400/50 V / Hz Hodpsix Akzofx Afhenk Sound pressure level (DIN 45635 T13) : 65 +/- 3 Compressed air connection:G 1/2" Length : 660 mm Width : 600 mm Height : 890 mm Weight : 230 kg Visit our store !

Condition: as good as new (ex-display), Year of construction: 2021, Exhibit: New screw compressor ALMIG BELT XP 4 - 10 bar (air-cooled) Bj. 2021 / AVAILABLE NOW! MA0113 Technical specifications Type: BELT XP 4 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Appendix C: 0.48 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Nominal power drive motor: 4 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 part 13): 62 dB (A) Length: 750 mm Width: 600 mm Height: 955 mm Weight: 201 kg Hnsdpfew Aal Sex Afhok Compressed air connection: G 1/2 " Visit our store. We always have a large selection of new and used compressors in stock!

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0044_SN0056019, New 4 kW screw compressor FirstAir with integrated refrigeration dryer Hjdpfxjfcrz Hj Afhonk and 200 liter compressed air tank and time-controlled steam trap Type: FAS4-200AT Year of construction: 2022 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 470 liters / min Installed motor power: 4 kW Protection class / insulation class drive motor: IP 55 F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 65 +/- 3 Compressed air connection: G 1/2 " Length: 1500 mm Width: 700 mm Height: 1550 mm Weight: 435 kg Drive: V-belt drive Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: like new (used), Year of construction: 2020, machine/vehicle number: C1-140_11, functionality: fully functional, operating hours: 10 h, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Hjdpjy A Nv Hofx Afhsnk Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock!

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Stationary, oil-free, high-performance reciprocating compressor used for the stretch blow molding process of PET bottles. Complete with anti-vibration mounts (no dynamic load), electric motor, V-belt drive, intercooler, separator, aftercooler, pulsation damper, and a 40 bar galvanized air receiver (500L) with electronic drains. High-pressure reciprocating compressor Manufacturer: AF Kompressoren Model: CE 46B Hnsdpoyttaiefx Afhjk Year of manufacture: 2013 Nominal capacity: 1320 m3/h Pressure: 40 bar Power: 250 kW 3 x 400V/50Hz The compressor comes from our PET bottle production line (Plama-Pet), which we discontinued in 2017 to focus on preform manufacturing. The compressor is in good condition. The original purchase price was €168,000 and it comes from ongoing production. Please refer to the PDF file for further technical details.

Year of construction: 2007, condition: ready for operation (used), A heated plate press Italpresse is available. Press force: 180t, max. hydraulic pressure: 600bar, cylinder stroke: 325mm, opening: 325mm, max. temperature: 300°C. An on-site inspection is possible. Hjdpfoy Antwjx Afhjnk

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm Hodoyz Tqrepfx Afhonk - Weight approx. 800 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Hnedpfxeyyz Txs Afhsk Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Motor power: approx. 12 kW • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control Hnjdpsyyxxfofx Afhok • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: used, functionality: fully functional, This offer is for a used ‘Konica Minolta AccurioPress C2070’ colour production system Items included: 1 x Konica Minolta AccurioPress C2070 with the following equipment: incl. PF-707m paper deck incl. FS-532 finisher Incl. Booklet Finisher SD-513 Incl. RU-509 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Hnsdsyxdq Rjpfx Afhsk Total: Approx. 463,710 pages Colour: Approx. 292,654 pages Black: Approx. 171,056 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Hnodpfjyxp Twsx Afhek Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Hjdpfx Aoyuyl Iofhonk Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, total height: 4,300 mm, ram adjustment: 100 mm, installation height: 500 mm, table height: 1,000 mm, total width: 2,200 mm, table length: 1,400 mm, pressing force: 200 t, control cabinet width: 2,000 mm, stroke length: 160 mm, clearance between the columns: 1,450 mm, working width: 1,100 mm, distance between side stands: 400 mm, overall weight: 27,000 kg, height adjustment type: electric, space requirement height: 4,500 mm, space requirement length: 2,200 mm, space requirement width: 1,800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01, ideal for the production of fuel cell stacks or hydrogen electrolyzers. hydrogen electrolyzers. The press is also suitable for (smooth) fineblanking, stroke rate 1 - 70 /min. Hnedpst Nf Agjfx Afhek Eccentric loads are also possible without any problems thanks to 4 connecting rod rams. It is also not possible for the press to jam. The press is completely overhauled and supplied with a new Siemens S7 control system.

Condition: used, Manufacturer: EDA Hnedpoyq Nrcjfx Afhjk Overall dimensions: 6600x1400x(1700 mm high) The equipment is not operational; it does not work due to a hydraulic issue!

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Hnsdpfx Afsyq Ngtohsk Model: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete Hedpfxeyb Sdio Afhsnk YOM 1991 Made in Germany Good working condition

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MP2506991, Hydraulic Clinch Press Miller MP645E, optional with feeding bowl for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: • Press force 2-57KN (6 ton) • Throath depth 450mm • Zylinder stroke 200mm • Travel speed 120mm/sec. • Cycle time 3sec. 1200/hour Hnodeirm R Espfx Afhsk • Size H 2200mm x W 800mm x D 960mm • Weight ca. 680 Kg • Electrical connection 400V, 2.2 KW The offered Miller Press is a demonstration machine from April 2022. It has been used for the installation of samples into customer sheets. In October the machine was exhibited on the Blech Expo in Hannover. Optional the machine can be equipped with an automatic vibration conveyor and automatic feeding tool. Thanks to the efficient hydraulic system, the high pressing force of 57KN and the repeatability of +/-1%, the machine can be used for most applications in a sheet metal processing company.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Hnedpfeyn Rhysx Afhjk Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: used, Year of construction: 2014, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2014 Pressing force: 40 t Hodpfjyibymex Afhonk

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Hnedpfx Ajyibv Iofhok Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Overall dimensions: 2800x2570x2000 mm Hnedpsyibhkofx Afhsk

Condition: like new (used), functionality: fully functional, The fruit press, juice press, belt press offers efficient juice extraction with a modern single-belt press system. The previously milled fruit is gently pressed between a high-quality polypropylene belt that runs over specially designed press rollers. After the initial press cycle, the pomace is conveyed via a return chute into a smaller pressing area for further compaction—maximizing juice yield. Automatic belt tensioning is provided by pneumatic drives, ensuring consistent and reliable operation. At the end of the process, an end scraper cleanly removes the pomace from the belt and discharges it from the press. The extracted juice passes through an integrated filter belt into the juice collection tank, from where it is efficiently pumped out. Meanwhile, the press belt is continuously cleaned with a high-pressure water jet—for maximum hygiene and trouble-free operation. Hnsdpfsymfm Uox Afhok Additional images available upon request.

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Hnjdpfxex H R U Se Afhok Year of manufacture: 2012 Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t Hnodpoyhbxcefx Afhsk

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Hsdpfxjygud Aj Afhsnk Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!