Used 2 Color Offset Press for sale (56,297)

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size Hedpfx Aovbdyfoh Njng ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Hnjdpfjxazhtox Ah Neg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Hedjx R U Idopfx Ah Nsng Model: G2-1200/2 Year: 1993 Condition: Used Stock number: 0375 Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: good (used), Year of construction: 1988, Reaction vessel, batch system, solids separator, washing trough, painter's wash station, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 plates Hjdpfx Aehvfznjh Neng -Hydraulic cylinder: Stroke: 115 mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm Hjdsrdi Dljpfx Ah Nong hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t

Condition: good (used), Year of construction: 1999, 1 used eccentric press, Ambold make Model: PEEV 40/2 Press force: 40 t Throat depth: 225 mm Stroke: 8 – 84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram area: 185 x 180 mm Hsdpsxvqltsfx Ah Neng Ram bore: 40 mm Drop-through opening in table: 210 x 170 mm Clamping plate: 570 x 450 mm Total power requirement: 3.5 kW Machine weight: approx. 2.7 t Dimensions (LxWxH): approx. 1.4 x 1.1 x 2.1 m

Condition: like new (used), Year of construction: 2022, Manufacturer: ROVETTA / AIDA Model: DFS-TE4-20000(2) 730-250 Press force: 2,000 tons Drive: SERVO Stroke: 800 mm Stroke rate: 50 rpm Hnsdpex Idxmsfx Ah Nsg Ram adjustment: 400 mm Side opening: 3,650 mm Bolster area: 7,300 x 2,500 mm Ram area: 7,300 x 2,500 mm NORDA Transfer Transfer pitch: 0-1,250 mm Transfer opening min./max.: 700 - 2,740 mm Transfer stroke: 0-350 mm Millutensil coil line Material thickness: 0.5 – 3.0 mm Material width: max. 1,800 mm Decoiler load capacity: 20 tons

Year of construction: 1969, condition: used, pressure 63 t Hnjdpoh Dfctefx Ah Neg throat - mm stroke 16 - 125 mm table surface area 800 x 630 mm ram adjustment 70 mm no. of strokes im Dauerlauf 80 Hub/min max. distance table - ram 417 mm ram surface 500 x 400 mm clamping plate thickness 70 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. m

Condition: used, functionality: unexamined, Year of construction: 2002, operating hours: 825 h, machine/vehicle number: E07.001.00, control type: PLC-controlled, actuation type: electric, controller manufacturer: Bachmann, stroke rate (min.): 8 1/min, stroke rate (max.): 40 1/min, power: 3.5 kW (4.76 HP), overall weight: 2,000 kg, total length: 1,000 mm, total width: 1,350 mm, total height: 2,300 mm, Equipment: CE marking, documentation/manual, type plate available, The machine is presumably fully functional. However, its last use was several years ago. A brief functionality test was successful. Hjdpsx Ah Irofx Ah Njng Pressing force: 60 kN Drawing force: 40 kN Maximum filling height: 55 mm Maximum pressing stroke: 25 mm

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m Hjdexuv Htopfx Ah Nsng

Condition: good (used), Code: 0218 Brand: ORMAMACCHINE Hnodpjxlt Uvefx Ah Nsg Model: P25/2 Hydraulic cold press for wood, furniture, doors, panels, furnishings , composite materials, plastics, aluminum and various materials Platen dimensions mm 2500 x 1200 Aluminum-coated platens Opening mm 500 N° 2 hydraulic pistons Ø 40 Motor Hp 1,5 Overall dimensions mm 2600 x 1200 x 2100 h Weight kg 800

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm ram: 450 x 280 mm throat: 250 mm Ram stroke: 16 to 125 mm Sheet thickness continuous stroke: 3.2 mm max. distance table ram: 417 mm drop-through hole: 280 x 250 mm Adjustment ram downwards: 70 mm Stroke rate: 80 /min Connection: 6 kW Accessories/equipment: Hsdpfx Ahoh N S Sde Nsng Condition: good Weight: 5 t Dimensions: 1.500 x 1.600 x 2.700 mm

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Hedpodhzf Isfx Ah Neng Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: used, pressure 63 t throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW weight of the machine ca. 5 t Hnsdpfstqm Dqox Ah Njg dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW Hnsdsfua Dcopfx Ah Nog • Carton feeder • Package ejector • Carton forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4.

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm Hjdpfovuukusx Ah Njng table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: used, machine/vehicle number: 698 328, 1-color offset printing press, manuf. Heidelberger, Type: GTO, 33 x 46 cm, with special dampening unit, manuf. Varn, Type: Kompac III, with numbering and perforating device, counter reading: 36,214,522. Print shop liquidation: additional systems, machinery, and office and commercial equipment available. Hjdpfex U A U Hex Ah Neng Inspection date: Thursday, 29 January 2026 from 10:00 am to 1:00 pm.

Condition: excellent (used), Year of construction: 2001, Heidelberg SM 52-5 H Hodpfx Ahsx Uz I Ej Nong 5 color Autoplate Straight machine Year 2001 CP 2000 Automatic blanket cylinder washing Automatic rollers washing Grafix Alphatronic 200 IR

Condition: used, Year of construction: 2006, color channels: 4, paper width (min.): 520 mm, paper width (max.): 520 mm, Heidelberg PM 52-4P Offset Printing Press PRICE: $39,000 USD Buyer is responsible for all rigging and dismantling within our facility. Buyer to arrange transportation after removal. Offered for sale is a well-maintained Heidelberg PM 52-4P, ideal for short to medium run commercial printing with fast makeready and excellent color consistency. - 79 million impressions - One owner since new - Complete maintenance history, fully documented and serviced exclusively by Heidelberg technicians - Regular preventive maintenance performed to manufacturer standards - Classic Console, Easy Plate, Auto Roller Washers, Auto Blanket Washer The press has been serviced by Heidelberg its entire life. We have the full service history on the machine. Hedjx Tcx Njpfx Ah Njng

Condition: used, Year of construction: 2005, Make: ARISA, Model: LD8-4-2000-470-230-LDE, Year of manufacture: 2005, Serial No.: 820016341, Press control system: Siemens, Type: Sinumerik 840D, Pressing force: 1,800 t, Table clamping surface: 4,500 x 2,300 mm, Ram clamping surface: 4,500 x 2,300 mm, Ram stroke: 750 mm, Ram adjustment: 400 mm, Die height min.: 900 mm, Die height max.: 1,300 mm, Strokes per minute: 8 - 24 spm, Cushion force (table): 2x 300 - 200 t, Cushion stroke (table): 250 mm, Cushion force (ram): 2x 5 - 55 t, Cushion stroke (ram): 150 mm, Coil feeding line, Max. coil weight: 25 t, Coil width: 300 - 1,800 mm, Sheet thickness: 0.5 - 3.0 mm, Consisting of decoiler and loading cart, Straightening machine, Oiling station, Transfer system, Switch and control cabinets, Platform system with staircase, Conveyor belt L 10,000 mm, Workbench system with undercabinets and vise, Quality control workstation. Hedpsx Ry Dqsfx Ah Nsng +++ Note: Machine is part of an online auction! +++

Condition: new, pressure 60 t stroke 380 mm table surface area Arbeitsbreite 750 mm pressure 259 bar oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds Hnsdpfxei A S I Ij Ah Njg - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm Hnjdovuucwspfx Ah Nsg hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1997, functionality: unexamined, machine/vehicle number: 20339, Impression counter: 53,071,436 sheets Hsdjx U Azaopfx Ah Nong Due to the dissolution of the print shop, further equipment, machinery, as well as office and business furnishings are available. Inspection date: Thursday, 29.01.2026 from 10:00 to 13:00

Condition: new, Year of construction: 2026, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Hsdpfet I D Thex Ah Neng Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: 1340, input current: 135 A, input voltage: 200 V, with special accessory singling-out unit, manufacturer Ryobi, type: High Great, additional special accessory powder device, manufacturer Grafix, type: Powder Max – Note: Control station belonging to the printing press by Ryobi, manufacturer Ryobi, type: PCS-G, with color measurement and control system, manufacturer Ryobi, type: BDS-E, with office PC as control PC and monitor, manufacturer Dell, and control software InkZone, version: 5/D001A1 build 211, with additional air generation for working air in a soundproof enclosure featuring central dampening solution for water preparation, manufacturer TecnoTrans, type: Alpha.D, and accessory system video register punch for printing plates, manufacturer Ryobi, type: RP920-780MB. Printing house closure – further equipment, machinery, as well as office and business equipment available. Inspection date: Thursday, 29/01/2026 from 10:00 am to 1:00 pm Hnjdpfxex U Aw Ue Ah Nog